Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Quality Assurance and Inspection Services (Third-Party Verification)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks third-party verification services to independently assess product conformance to Acceptable Quality Level standards, specifically Critical VII, Major IV, and Minor II, alongside adherence to ISO 9001:2015 quality management requirements. The scope includes comprehensive inspection activities, audit support, and a detailed review of QAP 16236 to ensure all deliverables meet defined quality benchmarks and regulatory compliance. Services must be performed at the designated place of performance in Tracy, California, with the required technical expertise to verify product consistency and quality control processes under stringent defense procurement standards. This subcontract under NAICS code 541330 is issued by the Strategic Acquisition Program Directorate within the Department of Defense and is open for response until July 31, 2026, with proposals due by 5:00 PM Eastern Time. Although no specific set-aside type is indicated, the solicitation is targeted toward qualified subcontractors capable of delivering professional quality assurance and inspection services aligned with federal defense quality protocols. The contract vehicle is accessible via the DIBBS portal, and successful bidders will be expected to provide documented evidence of technical capability, past performance in similar verification tasks, and full compliance with all referenced quality standards and procedures.

General Info

Third-party verification of product quality to AQL and ISO 9001:2015 standards in Tracy, California, for DoD defense procurement.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent verification of product conformance to AQL standards (Critical VII, Major IV, Minor II) and ISO 9001:2015, including audit support and QAP 16236 review.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment that demands continuous reliability and safety. The work centers on identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system longevity, and compliance with applicable regulations. All services will be executed through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational standards. The contract is structured as an Indefinite-Delivery/Indefinite-Quantity agreement under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities & Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager; inquiries and communications should be directed through their provided contacts. The solicitation was posted on July 21, 2026, with performance expected to take place at the airport. There is no specified set-aside type, and the contract is designed to support ongoing and evolving needs across the airport’s critical infrastructure systems.
Aviation Facilities & Infrastructure

POSTED

about 10 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
Inspection and Quality Control SupportThis contract seeks support for inspection and quality control activities related to field verification of material placement, compaction, and grading on transportation projects to ensure full compliance with Texas Department of Transportation standards. The work involves on-site monitoring and documentation to verify that construction practices meet engineered specifications and regulatory requirements, with a primary focus on ensuring structural integrity and long-term performance of roadways and related infrastructure. All tasks must be performed in alignment with TxDOT protocols and may include testing, reporting, and coordination with project teams to resolve non-conformances in a timely manner. The opportunity is structured as a subcontract under NAICS code 541330, indicating it relates to engineering services, and is posted on the Texas SmartBuy portal with a response deadline of August 12, 2026. While the solicitation number is not provided, the contract is managed by the Texas Department of Transportation and will be performed somewhere within the state of Texas without a specified city or zip code. The scope does not indicate any set-aside classifications, and there is no designated point of contact listed, suggesting that all inquiries should be directed through the provided portal link. Interested parties must submit their proposals before the deadline to be considered for award.
Texas Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 22 days
View Details
NAICS: 541330
New
SLED
Electrical Engineering Design Services for Parks InfrastructureThe City of Issaquah is seeking qualified firms to provide professional electrical engineering design services for public park infrastructure, focusing on lighting, power distribution, and control systems. The scope requires full compliance with Washington State electrical codes and standards, and all deliverables must be stamped by a licensed Professional Engineer (PE) to ensure regulatory adherence and public safety. This subcontract opportunity is open to firms capable of delivering detailed, code-compliant designs that support the city’s infrastructure improvements, with a strong emphasis on reliability, energy efficiency, and long-term maintainability of park systems. The solicitation was posted on July 20, 2026, and responses are due by August 14, 2026, at 11:00 PM Eastern Time. The NAICS code 541330 identifies this as engineering services, specifically electrical engineering, and the contract is classified as a subcontract under the city’s broader public works initiative. While no set-aside type is specified, applicants must be prepared to meet all applicable state and local requirements for public infrastructure projects. Proposals should demonstrate prior experience with municipal park projects, familiarity with Washington State regulatory frameworks, and the ability to coordinate with other design and construction teams to ensure seamless integration of electrical systems into park environments.
City of Issaquah

POSTED

about 19 hours ago

DEADLINE

in 24 days
View Details
NAICS: 541330
New
SLED
RFQ PARKS- On-Call Electrical Engineering Consultants for Parks & Recreation ProjectsThe City of Issaquah’s Parks and Community Services Department is soliciting qualified electrical engineering consultants on an on-call basis to support a variety of electrical engineering needs for parks and recreation projects. These services may range from supporting larger capital improvements to addressing one-time or urgent engineering requirements, with work being issued through individual task orders that align with the format outlined in Professional Services Agreement—Attachment C. The City plans to select up to two firms to ensure broad expertise and flexibility in addressing diverse project demands, though no minimum volume of work is guaranteed and the timing and extent of assignments will vary significantly. Interested firms must respond by the deadline of August 14, 2026, with all submissions directed to the designated point of contact, Robin Spear, at the City of Issaquah. The solicitation is open to qualified electrical engineering consultants capable of delivering professional services within Washington State, particularly in support of municipal parks and recreation infrastructure. There is no set-aside designation specified, and while no guaranteed work volume exists, selected firms will be contacted as needs arise, with each task order independently authorized and managed. Proposals should demonstrate relevant experience, capacity, and ability to meet the City’s technical and operational expectations across a range of electrical engineering applications.
City of Issaquah

POSTED

about 19 hours ago

DEADLINE

in 24 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 493190
New
DIBBS
Defense Logistics Agency (DLA) Packaging, Marking & Bar-Coding ServicesThis contract requires compliance with MIL-STD-129 standards for the packaging, marking, and bar-coding of cylinder assemblies, encompassing both unit and group packs, with specific application of GS1-128 or Data Matrix barcodes to ensure accurate identification and traceability throughout the defense logistics chain. All packaging and labeling must meet rigorous Department of Defense specifications to support efficient receipt, storage, and distribution of critical materiel. The work is scoped under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, and the NAICS code 493190 indicates the work falls under Other Transportation Support Activities, aligning with logistics and supply chain services rather than manufacturing. The opportunity is issued by the Strategic Acquisition Program Directorate within the Department of Defense, with a response deadline of August 4, 2026, and was posted on July 20, 2026. The contractor must be prepared to deliver services capable of integrating seamlessly with existing DLA logistics systems, ensuring 100% compliance with bar-code readability, label placement, and packaging durability under operational conditions. While no specific place of performance or point of contact is listed, the requirement implies nationwide or global logistics support alignment with DLA infrastructure and timelines. Bidders must focus on proven experience in military-grade packaging and bar-coding systems to meet the technical and operational expectations of this subcontract.
Other Warehousing and Storage

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334419
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract solicits the manufacture and delivery of a minimum of one and up to nine units of a special-purpose electrical cable assembly identified by NSN 6150-01-540-1482 and part number 3584372, with all units required to meet stringent Department of Defense technical specifications and military standards. The work must be performed in accordance with DLA requirements and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, ensuring eligibility and compliance with FAR 19.5 guidelines. The North American Industry Classification System code 334419 applies, indicating this is for other electrical equipment and component manufacturing. The solicitation was posted on July 20, 2026, with responses due no later than August 4, 2026, and is structured as a subcontract opportunity under the Strategic Acquisition Program Directorate within the Department of Defense. All deliveries must comply with the specified technical and quality controls associated with the cable assembly, and the performance location is not designated, implying flexibility in manufacturing site selection as long as all contract conditions are met. The opportunity is accessible via the DIBBS portal, and bidders must ensure full alignment with federal procurement rules and military specifications to be considered eligible for award.
Other Electronic Component Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details