Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Assurance and Inspection Services

Active

Federal

Response Deadline09/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Quality Assurance and Inspection Services involves the attribute and variable inspection of 24 manufactured ground rods for prime contractors under the ASC Supplier Oper AE and AF Div. The scope of work requires the execution of inspection plans based on MIL-STD-1916 to verify that material properties and dimensions align with the Technical Data Package. The contractor will utilize precision metrology tools, including calipers and micrometers, to perform these evaluations. Final deliverables include detailed inspection reports and certifications of compliance. The performance of these services is located in Cherry Point, and the project falls under NAICS code 541380.

General Info

QA inspection of 24 ground rods per MIL-STD-1916 in Cherry Point.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-T-783T.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ROD, GROUND

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineSep 30

Submission deadline

Response Deadline

09/30/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs attribute or variable inspection of manufactured ground rods for prime contractors on ASC Supplier Oper AE and AF Div projects. Executes inspection plans based on MIL-STD-1916 to verify dimensions and material properties against the Technical Data Package (TDP). Utilizes metrology tools, calipers, and micrometers. Delivers inspection reports and certifications of compliance for 24 units.

Similar Contracts

Same NAICS industry code

Geotechnical and Materials Testing Services for Waterline Replacement Project in Hemet, CA

Solicitation # CIP 5661

Albert A. Webb Associates is seeking a qualified small and disadvantaged business firm to serve as a subconsultant for the City of Hemet's Oakland and Santa Fe Waterline Replacement project, identified as CIP 5661. The project is funded through a U.S. Environmental Protection Agency Community Grant and is estimated to span approximately 210 construction working days. The selected subconsultant will be responsible for geotechnical and materials inspection and testing services, including initial sampling and acceptance testing of proposed materials, as well as ongoing material and compaction testing for roadway subgrade, aggregate base, trench backfill, pipe bedding, and trench bottom. A key deliverable is a certification memorandum signed by a professional engineer identifying any non-complying materials. The contract requires strict adherence to federal and state regulations, including EPA Disadvantaged Business Enterprise requirements under 40 CFR Part 33, the Build America, Buy America Act, and California prevailing wage laws. Subcontractors must be registered with the Department of Industrial Relations and comply with the California Levine Act regarding campaign contribution disclosures. The award is contingent upon the selection of Albert A. Webb Associates by the City of Hemet. Interested firms must provide a technical proposal, a fee proposal based on lump sum, unit price, and hourly rates, and documentation of their small or disadvantaged business certifications.

Albert A. Webb Associates

POSTED

about 3 hours ago

DEADLINE

Production Lot Test (PLT) ServicesThis subcontract for Production Lot Test (PLT) Services, managed by the Department of Defense ASC Commodities Division, involves performing specialized testing and validation on production lots of cable assemblies for prime contractors on DLA Aviation projects. The scope of work requires executing tests to verify electrical continuity, signal integrity, and physical tolerances according to NSN 6150-01-091-6485, utilizing equipment such as multimeters, oscilloscopes, or automated cable testers to deliver certified test reports. The project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 30, 2026, following the posting date of September 22, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

Quality Testing and Certification Services (PLT)This subcontract for Quality Testing and Certification Services focuses on performing Production Lot Testing for prime contractors delivering DLA supply contracts. The selected provider will utilize metrology and testing equipment to measure actual results against the tolerances specified in the technical data package, ensuring all deliverables meet the required standards. The scope of work includes generating formal test reports and process certifications acceptable to the DLA, with a final delivery of certified reports detailing actual results and tolerances. This requirement is managed by the ASC Commodities Division of the Department of Defense, with the place of performance located at Hill AFB, Utah.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) for Conduit AssembliesThis subcontract involves performing First Article Testing for conduit assemblies to support prime contractors delivering DLA Aviation supply contracts. The primary objective is to conduct testing on the first production unit of NSN 5975-01-532-0286 to ensure full compliance with technical specifications, material integrity, and dimensional accuracy. Using precision measurement equipment to validate NSN data, the provider will deliver a formal FAT Report and an approved first article sample. The project is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland, Pennsylvania. Classified under NAICS code 541380, the opportunity was posted on September 22, 2026, with a response deadline of September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) Coordination and ExecutionThis subcontract for the Department of Defense ASC Commodities Division involves the coordination and execution of First Article Testing to support prime contractors delivering DLA supply contracts. The primary objective is to validate manufacturing processes and product specifications by verifying material properties, dimensions, and quality standards. This technical validation is performed using specialized metrology and inspection equipment, including micrometers and Coordinate Measuring Machines. The selected provider is responsible for submitting detailed test results for government approval and delivering the final FAT Report along with approved first-article samples. The work is designated under NAICS code 541380 and will be performed in Texarkana, Texas. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

First Article Test (FAT) and Quality Validation ServicesThis subcontract for First Article Test and Quality Validation Services supports prime contractors on Defense Logistics Agency projects. The selected provider will perform specialized attribute or variable inspections according to MIL-STD-1916 and validate material properties and dimensions against 98897 series drawings. The primary deliverables include certified test reports and validated First Article units. The contract is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with performance taking place at Robins Air Force Base. Due to the handling of export-controlled technical data, the provider must maintain ITAR registration and CMMC Level 2 certification. The opportunity is categorized under NAICS code 541380, with a response deadline of September 30, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 14 hours ago

DEADLINE

Independent Testing AgencyThe City of Pickering is seeking a subcontracted Independent Testing Agency to perform independent inspection and testing of installed electrical systems for prime contractors on various facility projects. The selected provider will utilize specialized electrical testing and diagnostic equipment to verify installations and must hold independent third-party certification to ensure compliance and quality. The primary responsibility of the contractor is to deliver formal inspection and final test reports to both the City and the prime contractor. This opportunity was posted on September 22, 2026, with a response deadline of October 14, 2026.

City of Pickering

POSTED

about 16 hours ago

DEADLINE

Geotechnical and Construction Material Testing

City of Grande Prairie

POSTED

about 17 hours ago

DEADLINE

NDT Inspection Services (UT/VT)This subcontract for NDT Inspection Services involves performing non-destructive testing for prime contractors on IMF vessel projects at the Puget Sound Naval Shipyard. The scope of work requires conducting ultrasonic thickness measurements at 700 specific sites across the underwater body, hull, and freeboard, as well as visual inspections of the hull, freeboard, and all three decks. All testing must be performed using ultrasonic thickness gauges and visual inspection tools in accordance with ASTM weld inspection standards. The successful contractor is responsible for delivering documented UT/VT inspection reports as specified in CDRL A032. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Puget Sound Naval Shipyard IMF

POSTED

about 19 hours ago

DEADLINE

in about 1 month

LPM Testing and Validation ServicesThe LPM Testing and Validation Services subcontract, issued by Navsea HQ under the Department of Defense, involves the technical testing and evaluation of LPMs for prime contractors on submarine projects. The scope of work includes executing the Type 20 and Type 24 Test Requirements Matrix and validating Classified Annex requirements through the use of environmental and pressure testing chambers. To fulfill these requirements, the contractor must maintain a SECRET Facility Clearance and ensure full compliance with NISPOM standards. The primary deliverables for this engagement are the submission of detailed test reports and official validation certificates. This opportunity falls under NAICS code 541380, with a response deadline of October 20, 2026.

POSTED

about 19 hours ago

DEADLINE

First Article Testing (FAT) and Validation ServicesThis small business set-aside subcontract for DLA Land Warren involves providing First Article Testing and Validation Services for a single unit of manufactured hardware. The contractor is responsible for executing technical tests according to the Technical Data Package and MIL-STD 1916 sampling standards, while coordinating with DCMA for final inspection and acceptance. The primary deliverables include one validated test unit and a completed First Article Test Report. To qualify for this engagement, the provider must maintain US/Canada Joint Certification Program status and ensure full compliance with CMMC and NIST SP 800-171 standards for the secure handling of technical data. The solicitation was posted on September 22, 2026, with a response deadline of October 23, 2026, under NAICS code 541380.

DLA Land Warren

POSTED

about 19 hours ago

DEADLINE

in about 1 month

PSC 4610 Cathodic Protection Inspection Services

Solicitation # 36C26026Q0982

The Department of Veterans Affairs is seeking an experienced cathodic protection service technician to inspect the water tower system at the Jonathan M. Wainwright VA Medical Center in Walla Walla, Washington. This combined solicitation, identified by number 36C26026Q0982, falls under NAICS code 541380 and is designated as a total set-aside for small businesses. The opportunity was posted on September 22, 2026, with a response deadline of October 10, 2026. Interested parties should coordinate with the primary point of contact, Contract Specialist Tyrone Whalen, through the Network Contract Office 20 based in Vancouver, Washington.

260-NETWORK Contract Office 20 (36C260)

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Supply of Structural Aircraft Plates (NSN 1560-01-733-8598)This subcontract with the Department of Defense involves the supply of four structural aircraft plates meeting the technical specifications for NSN 1560-01-733-8598. The provider is responsible for manufacturing or sourcing these plates using aerospace-grade materials and precision machining to support prime contractors on DLA supply contracts. A critical requirement of the agreement is the maintenance and delivery of a comprehensive supply chain traceability documentation package in accordance with requirement RQ018. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Pressure Transmitters (NSN 6685123750988)This subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, involves the supply of seven pressure transmitters identified by part number X00E50200509 and NSN 6685123750988. These components, produced by Rolls-Royce Solutions America Inc and MTU Friedrichshafen GmbH, are designated as Critical Application Items. The contract requires strict adherence to MIL-STD-129 for marking and RP001 for palletization. The opportunity is a Total Small Business Set-Aside under NAICS code 334516, with performance located in San Diego, California. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supplier of Nonmetallic Electrical Conduit Assembly (NSN 5975-01-422-5743)This subcontract involves the manufacture or sourcing of one Nonmetallic Electrical Conduit Assembly, identified by NSN 5975-01-422-5743, for prime contractors supporting DLA Aviation supply contracts. The selected supplier is responsible for the production and delivery of the unit, ensuring all marking, labeling, and palletization strictly adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. The opportunity is issued by the Department of Defense under the ASC Supplier OE and AF Division, with the place of performance located at Robins AFB. Interested parties must respond by September 30, 2026, for this requirement categorized under NAICS code 335999.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supplier of Nonmetallic Flexible Conduit (NSN 5975016170683)This subcontract involves the supply of three units of nonmetallic flexible conduit, specifically part number BC261-24-100 or approved equivalents meeting NSN 5975016170683 specifications. The contract is managed by the ASC Supplier Oper AE and AF Div under the Department of Defense, with a response deadline of September 30, 2026. The supplier must adhere to strict military standards for packaging, marking, and quality control, specifically MIL-STD-2073-1E, RP001, MIL-STD-129, and MIL-STD-1916 or MIL-STD-105/AQZ1.4. Delivery is required FOB Origin to the DLA Distribution DDSP in New Cumberland, Pennsylvania.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture and Supply of Special Shaped SpacersThis subcontract involves the manufacture and supply of 16 special shaped spacers under NSN 5365-01-658-9678 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The fabrication must adhere to TDP Rev A Gen 1 and Drawing NR 19207 12580893, utilizing precision machining equipment. Quality control and delivery requirements include sampling per MIL-STD-1916 or ASQ H1331, marking according to RQ017, and packaging in compliance with ASTM D3951 and MIL-STD-129. The contractor must ensure full compliance with DFARS 252.225-7001 and deliver the finished units to Tracy, California. This opportunity falls under NAICS code 332710 and was posted on September 22, 2026, with a response deadline of September 30, 2026.

POSTED

about 14 hours ago

DEADLINE

Manufacturing of Structural Aircraft Panels (NSN 1560-01-152-1476)This subcontract involves the manufacturing of structural aircraft panels under NSN 1560-01-152-1476 for the Department of Defense, specifically the ASC Supplier Oper AE and AF Div. The contractor is responsible for fabricating nine finished panels in accordance with TDP Rev A Gen 3 and Reference Drawing 81205 25-2779, Rev F, with performance taking place at Tinker AFB. The project requires the completion of a Government First Article Test per FAR 52.209-4 and the delivery of all associated FAT documentation. Strict cybersecurity and compliance standards are mandated, including CMMC Level 2 certification via C3PAO, as well as adherence to DFARS 252.204-7012 and NIST SP 800-171.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Specialized Coating and PlatingThis subcontract with the Department of Defense, specifically for ASC Supplier Oper AE and AF Div, involves the application of protective coatings and surface treatments to ground rods. The work requires the use of chemical treatment facilities and plating tanks to deliver finished, coated products. A critical requirement of the performance is strict adherence to DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. The project is categorized under NAICS code 332813 and will be performed in Cherry Point. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

Precision Component Manufacturing (Ground Rods)This subcontract involves the manufacture of 24 finished ground rod components for prime contractors under the ASC Supplier Oper AE and AF Div projects. The production must adhere to TDP Rev A Gen 1 and BASIC CID A-A-55804A standards, utilizing precision machining and forming equipment to ensure all dimensional tolerances and material specifications are met. The work is performed in Cherry Point and must comply with DFARS 252.223-7008, which prohibits the use of Hexavalent Chromium. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Dial Indicating Pressure Gages (NSN 6685-01-671-1191)This subcontract involves the supply of 22 units of Dial Indicating Pressure Gages, identified by NSN 6685-01-671-1191, for prime contractors supporting Army Contracting Command projects. The Department of Defense, specifically the ASC Supplier OE and AF Division, requires the contractor to source these items and ensure all marking, labeling, and packaging adhere to MIL-STD-129, MIL-STD-2073-1E, and RP001 DLA standards. The delivery of all 22 units must be completed by January 11, 2027, with the place of performance located in Tracy, California. This procurement falls under NAICS code 334512 and was posted on September 22, 2026, with a response deadline of September 30, 2026.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 14 hours ago

DEADLINE

Supply of NAS1198-6-8 Aerospace Fasteners

Storage Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Intake Air Cleaner Filter Elements (P/N P783826)

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

Supply of Cabin Door Beam Hinges and StopsThis subcontract involves the procurement or manufacture of nine Cabin Door Beam Hinges and Stops, identified by NSN 1560-00-885-0076, to support prime contractors delivering DLA Aviation supply contracts. The work is managed by the Department of Defense under the ASC Supplier Oper AE and AF Div, with the place of performance located in New Cumberland. The supplier must adhere to specific packaging standards, utilizing ASTM D3951 for commercial items and TQ requirement IP025 for hazardous materials. Additionally, the contract requires strict compliance with FAR 52.204-24 and DFARS 252.204-7016 concerning the use of telecommunications equipment. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS