This Government Contract opportunity from Government of Canada was posted on April 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quality Assurance & Software Testing

Closed

International

Submission Closed05/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690

New

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

Elsinore Valley Municipal Water District is soliciting professional design, bidding support, and engineering services for the replacement of the existing Corydon groundwater production well with a new facility on the same site, utilizing existing transmission infrastructure to maintain and enhance potable water production. The project, funded in part by a U.S. Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, requires comprehensive engineering services across two phases: Phase 1 involves civil site design, technical specifications, and line-bid items for drilling and abandoning the old well, including full-time construction management oversight and bidding assistance; Phase 2 covers architectural, structural, mechanical, electrical, and instrumentation design for equipping, testing, and commissioning the new wellhead facilities, along with continued engineering support during construction. The selected consultant must deliver final 100% design submittals including signed and stamped plans, calculations, permit documentation, an operations plan, a probable cost estimate, and a complete bid schedule, while also providing ongoing services such as response to RFIs, evaluation of change orders, shop drawing reviews, commissioning support, operator training, and record drawing development. All work must comply with Riverside County and California State Water Resources Control Board regulations, federal grant requirements including Good Faith Effort and monthly reporting, and the Buy America provisions under 2 CFR Part 184 and the Build America Act. The solicitation emphasizes the use of DBE, MBE, and WBE firms in key service areas including hydrology/hydraulic modeling, structural and electrical engineering, geotechnical investigation, and utility potholing. Proposals are evaluated on a weighted basis—qualifications and experience (25%), understanding of project and approach (25%), scope and schedule (20%), innovation (10%), cost (10%), and overall proposal quality (10%)—with the award based on demonstrated competence, not lowest price. The successful respondent must submit detailed cost proposals broken down by task with all hourly rates and incidental costs, and will be subject to a negotiated not-to-exceed dollar limit. Payment will be made monthly via the Department of Treasury ASAP system within 45 days of invoice approval, with strict adherence to federal requirements including audit thresholds of $750,000 in federal spending, whistleblower protections, conflict of interest disclosures, drug-free workplace standards, and trafficking in persons prohibitions. All proposals must be submitted via the PlanetBids portal by 10:00 a.m. local time on

TKE Engineering, Inc.

POSTED

DEADLINE

Hazardous Materials Labeling and Compliance for Defense SupplyThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for hazardous materials shipped to DLA Distribution San Joaquin in Tracy, California, with strict adherence to OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 marking specifications. All labels must accurately convey chemical hazards, precautionary statements, and product identification, while the accompanying SDS must follow the Globally Harmonized System format and be current, complete, and accessible to end users. The materials must be properly marked and documented to ensure regulatory compliance and operational safety throughout the defense supply chain. This subcontract, classified under NAICS code 541690, is issued by the Department of Defense through DLA Distribution San Joaquin and is open for responses until August 17, 2026. The place of performance is specified as Tracy, CA, with a ZIP code of 95304-5000. The solicitation is posted on the DIBBS platform under reference number SPE8E826T4992, and vendors must ensure their proposed solutions meet federal defense logistics requirements for hazard communication and material handling. Failure to comply with labeling or SDS standards may result in rejection of shipments and potential contract penalties.

POSTED

DEADLINE

Hazard Communication & Safety Compliance (If Applicable)The contract requires strict adherence to OSHA and MIL-STD-129 standards for labeling hazardous containers and contents, ensuring all safety protocols are followed in accordance with federal regulations. This includes the accurate application of hazard communication labels and the ongoing maintenance of comprehensive safety documentation to reflect any changes in container contents or hazard status. The work is tied to physical operations at Tracy, California, with the zipcode 95304-5000 designated as the place of performance, and must be executed under the oversight of the Department of Defense through its Construction & Equipment Containers division. The subcontract is open for response until August 17, 2026, with a posted date of August 5, 2026, and falls under the NAICS code 541690, which covers other scientific and technical consulting services. Compliance is mandatory, and all activities must align with military and workplace safety standards to ensure operational integrity and regulatory conformity.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the identification, classification, and thorough documentation of all hazardous components associated with the jack, including but not limited to hydraulic fluid and surface coatings, ensuring full compliance with occupational safety standards. The successful contractor must prepare and submit accurate Safety Data Sheets (SDS) in accordance with OSHA’s 29 CFR 1910.1200 regulations, providing complete and up-to-date information on chemical hazards, handling precautions, and emergency response procedures. This work is critical to maintaining workplace safety and regulatory adherence throughout the product lifecycle. This subcontract is a Total Small Business Set-Aside under the SBA program with a NAICS code of 541690, indicating it is reserved exclusively for small businesses. It was posted on August 5, 2026, with proposals due by August 17, 2026, and the performance location is established in New Cumberland, PA, with a ZIP code of 17070-5002. The contracting agency is the Department of Defense under the organization title CONSTRUCTION & EQUIPMENT MANU & CON, and the solicitation is administered through the DIBBS platform. All work must be completed in alignment with federal safety mandates and delivered to meet the specified regulatory and administrative requirements without exception.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThis contract requires the provision of comprehensive hazard communication labeling services for hazardous materials, ensuring full compliance with OSHA and MIL-STD-129 standards. The scope includes the preparation and submission of pre-award documentation, as well as detailed analysis of regulatory exceptions to support legal and operational adherence. All labeling must meet federal requirements for workplace safety and military logistics, with an emphasis on accuracy, clarity, and traceability throughout the supply chain. The work is to be performed at Tracy, California, with a 95304-5000 zip code designation, and the contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid. The NAICS code 541690 indicates this falls under other scientific and technical consulting services, specifically aligning with regulatory compliance and safety consulting activities. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the contracting office affiliated with the Department of Defense through DLA Dist San Joaquin.

POSTED

DEADLINE

Hazardous Materials Compliance & SDS ManagementThe contract requires the identification and thorough documentation of hazardous materials contained within gaskets or packaging, with strict adherence to regulatory standards including OSHA, DFARS, and Federal Standard No. 313. This involves accurately determining the presence, composition, and classification of hazardous substances and preparing Safety Data Sheets that fully comply with all applicable federal and defense acquisition requirements. The work must ensure complete traceability and regulatory alignment to support safe handling, transportation, and disposal throughout the supply chain. The solicitation is issued under the NAICS code 541690 for other scientific and technical consulting services, classified as a subcontract with a response deadline of August 17, 2026. The performance location is specified as New Cumberland, Pennsylvania, 17070-5002, with the contracting activity under the Department of Defense through the Land Supplier Operations Vehicle Support office. While no specific point of contact is provided, bidders must submit their proposals through the DIBBS platform at the designated URL before the deadline to be considered for award.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the application and submission of hazard warning labels compliant with OSHA’s 29 CFR 1910.1200 and DFARS 252.223-7001 to ensure adherence to Department of Defense safety and communication standards. All submissions must align with federal regulations governing hazard communication, including proper labeling of chemicals and hazardous materials used in DoD-related operations, with a specific focus on accuracy, clarity, and regulatory completeness. The work is classified as a subcontract under NAICS code 541690, indicating it falls under other scientific and technical consulting services, and performance is designated for San Diego, California, with a zip code of 92136-3581. The solicitation was posted on August 5, 2026, with a firm deadline for responses set for August 17, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible subcontractors. The contract is managed under the DoD’s San Diego office, and all submissions must be made through the official DIBBS platform using the provided RFQ link. Compliance with both OSHA and DFARS requirements is mandatory, and failure to meet these standards may result in rejection of the submission or non-performance penalties. The subcontractor must possess the technical knowledge and systems to generate, validate, and submit labels that meet all current federal and DoD specifications.

POSTED

DEADLINE

Export-Controlled Technical Data Handling & CertificationThis contract requires the secure handling and compliance management of technical data subject to ITAR and EAR regulations, with specific attention to the requirements of the US/Canada Joint Certification Program. The subcontract is set aside for Women-Owned Small Businesses and falls under the NAICS code 541690, indicating it is related to other scientific and technical consulting services. Performance of the work is designated for San Diego, California, with a response deadline of August 17, 2026. The contracting activity originates from the Department of Defense under the organization name Construction & Equipment Manu & Con, and the scope centers on ensuring strict adherence to federal export control laws while managing sensitive technical information across international collaboration frameworks. All activities must maintain rigorous compliance protocols to safeguard controlled data and meet certification standards required for joint operations with Canadian entities.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires compliance with hazard communication standards for all shipped materials, mandating accurate preparation of safety data sheets and proper labeling of containers in accordance with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001. This includes ensuring that all hazardous substances are identified, categorized, and communicated to end users through standardized documentation and visible labels to meet federal regulatory requirements. The scope centers on supporting safe handling, storage, and transportation of hazardous materials across the supply chain under a subcontract arrangement. The solicitation is issued under NAICS code 541690 for other scientific and technical consulting services and is associated with the Department of Defense, specifically under the Construction & Equipment MRO SVC I agency. The place of performance is designated as Bremerton, Washington, with a ZIP code of 98314-6001. The proposal submission deadline is August 17, 2026, and the opportunity was posted on August 5, 2026, with all responses required to be submitted through the DIBBS platform using the provided solicitation reference. There is no specified set-aside designation, and the contract is structured as a subcontract under a broader federal procurement framework.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Hazardous Material Compliance & Labeling ServicesThe contract requires the development and application of OSHA-compliant hazard warning labels and Safety Data Sheets for delivered items, ensuring full alignment with 29 CFR 1910.1200 for hazard communication and MIL-STD-129 standards for packaging and labeling. All deliverables must accurately reflect the chemical and physical hazards of the materials, provide clear, standardized warnings, and maintain consistency with federal regulatory requirements to support safe handling, storage, and transport. The work is scoped to support Department of Defense logistics and must meet stringent military packaging specifications while integrating seamlessly with existing supply chain protocols. This is a Service-Disabled Veteran-Owned Small Business Set-Aside subcontract under NAICS code 541690, issued by the Department of Defense through the Construction & Equipment Manu & Con organization. The opportunity was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as Tracy, California, with ZIP code 95304-5000. The contract focuses on compliance-driven technical services, emphasizing precision in documentation and labeling to ensure operational safety and regulatory adherence across military supply channels.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract pertains to the identification, documentation, and ongoing management of Safety Data Sheets for hazardous materials utilized in manufacturing or finishing processes under the Fluid Handling Division of the Department of Defense. Responsible parties must ensure full compliance with regulatory standards by accurately cataloging all hazardous substances, maintaining up-to-date SDS documentation, and implementing systems for continuous monitoring and updates as materials or processes change. The work is to be performed at a location in Anniston, Alabama, with a zip code of 36201-4199, and must be completed in alignment with the NAICS code 541690, which covers other scientific and technical consulting services. Proposals are due by August 17, 2026, and the solicitation was posted on August 5, 2026, with the contract designated as a subcontract. All activities must support the defense sector's safety and regulatory obligations without deviation, requiring robust procedures for traceability, accessibility, and training related to hazardous material handling.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and DocumentationThe contract entails the preparation and submission of Safety Data Sheets and hazard labeling for hazardous materials, ensuring full compliance with OSHA regulations and DFARS requirements for defense-related handling and documentation. All deliverables must adhere to federal safety standards to support safe storage, transportation, and use of hazardous substances within Department of Defense operations. The work is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 541690 indicating it falls under other scientific and technical consulting services. Performance is required at the Jacksonville, Florida location with a zip code of 32212-0103, and proposals must be submitted by the deadline of August 17, 2026, following the solicitation published on August 5, 2026.

JACKSONVILLE BLDG

POSTED

about 12 hours ago

DEADLINE

in 11 days

AI Contract Overview

The contract requires the performance of comprehensive quality assurance, functional testing, and compliance inspections to verify that a costing tool fully satisfies all contractual requirements and predefined pass/fail criteria. This work is critical to ensuring the tool operates accurately, reliably, and in alignment with established standards before deployment. The scope centers on validating system functionality, identifying defects, and confirming adherence to regulatory and operational benchmarks through rigorous testing protocols. This is a subcontract under the Government of Canada’s Department of Employment and Social Development, with the NAICS code 541690 indicating it falls under other scientific and technical consulting services. The solicitation was posted on April 27, 2026, with responses due by May 27, 2026. Performance is expected to occur in Canada, though no specific city is listed. The contract is not subject to any set-aside provisions and is open to eligible subcontractors seeking to provide specialized software testing and assurance services to support federal digital infrastructure.

General Info

Quality assurance and compliance testing for costing tool under Canadian government subcontract, deadline May 27, 2026.

Agency

Government of Canada → Department of Employment and Social DevelopmentView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Canada, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 27

subcontract

Response DeadlineMay 27

Deadline has passed

Submission Closed

05/27/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Employment and Social Development

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of Employment and Social Development

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Conduct quality assurance, functional testing, and compliance inspections to ensure the costing tool meets contractual requirements and pass/fail criteria.