Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Control and Compliance Documentation

Active

Federal

Response Deadline08/14/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the development and submission of a Quality Control Plan aligned with Air Force directives AFI 33-322 and AFMAN 37-123/138, ensuring rigorous adherence to established standards for quality assurance and operational compliance. The contractor must implement procedures to monitor, document, and report on quality metrics throughout the project lifecycle while maintaining full accountability for all government-controlled data in accordance with federal records management policies. The work is tied to Grand Forks AFB with a response deadline of August 14, 2026, and the contract falls under NAICS code 541330, indicating it is a subcontract for scientific and technical consulting services. Compliance with all regulatory frameworks and secure handling of sensitive data are critical requirements, with performance expectations centered on precision, documentation integrity, and alignment with Department of Defense standards.

General Info

Develop Quality Control Plan per Air Force directives for Grand Forks AFB by August 14, 2026, ensuring secure data handling and DoD compliance.

Agency

Department Of Defense → FA4659 319 Cons PkView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Grand Forks AFB, ND, 58204, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 7

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 06:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4659 319 Cons Pk

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4659 319 Cons Pk

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Develop and submit a Quality Control Plan (QCP), ensure compliance with Air Force directives (AFI 33-322, AFMAN 37-123/138), and manage government-controlled data per records policies.

Similar Contracts

Same NAICS industry code

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subcontractors to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County, California, with a focus on engaging Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other eligible firms under SBA set-aside programs. The scope of work encompasses a broad range of professional services including engineering, environmental consulting, surveying, geotechnical analysis, permitting, public outreach, and utility location, aligned with NAICS codes such as 541330 and others related to architectural and engineering services, construction, and regulatory support. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents by 5 p.m. PST on August 14, 2026, to receive full project details, with the formal response deadline for proposals set for September 15, 2026. All interactions and submissions should be directed to Charlie Brown at charles.brown@ghd.com, and performance is expected to occur within the service area of the Elsinore Valley Municipal Water District in Southern California.

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under solicitation number corydon-well-replacement-c2305-1. The project entails designing a new municipal groundwater production well to replace and abandon the existing Corydon well, with work divided into two phases: Phase 1 includes technical specifications, civil site design, line-bid items for drilling and abandonment, bidding assistance, and full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board requirements; Phase 2 involves detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design drawings along with a line-item bid schedule for equipping, testing, and commissioning. The new well must meet AWWA standards, utilize a 24-inch diameter stainless steel Ful-Flo louvered screen, match existing vertical turbine equipment, tie into the Corydon Blend station and Malaga blending location, and comply with SWRCB-DDW, DWR, and EVMWD requirements. Key deliverables include a Preliminary Design Report at up to 30% design completion, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of Record Drawings reflecting field changes alongside start-up and operator training support. The contract is governed by the Federal Acquisition Regulation with incorporated clauses including 2 CFR Subtitle A, Part 200, 2 CFR 1400 and 1401, DOI Standard Award Terms, and 48 CFR 52.203-17 for subawards over the simplified acquisition threshold. Respondents must complete mandatory certifications in Attachment “2,” including American Iron and Steel Certification, Debarment and Suspension Certification, SAM Information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, Public Works Contractor Registration, and DBE Subconsultant Information. The RFP requires strict adherence to Build America Buy America Act compliance, including domestic-content documentation and waiver procedures for non-compliant materials, and prohibits procurement of equipment from Huawei or ZTE. The award will be based on demonstrated competence and professional qualifications, with evaluation factors weighted as follows: Relevant Qualifications/Experience (25%), Understanding of Project and Project Approach (25%), Scope of Work and Schedule (20%),

Ardurra Group, Inc.

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District, calls for comprehensive professional design, bidding support, and engineering services during construction for a critical water infrastructure upgrade in Lake Elsinore, Riverside County, California. The work encompasses the full lifecycle support of replacing an existing well, including detailed engineering plans, assistance with the procurement process, and ongoing technical oversight during implementation to ensure compliance, safety, and efficiency. The solicitation is open to qualified firms with expertise in water system design and construction support, and participation is encouraged for Disadvantaged Business Enterprises as part of the Department of Transportation’s DBE program. The NAICS code 541330 classifies the required services under engineering services, and all proposals must be submitted by September 1, 2026, with inquiries directed to Katie Neubauer of AKM Consulting Engineers, the contracting agency.

AKM Consulting Engineers

POSTED

about 10 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and formally abandon the existing Corydon Well on Elsinore Valley Municipal Water District (EVMWD) property, with all work conducted in compliance with California State Water Resources Control Board and Riverside County regulations. The project is divided into two phases: Phase 1 focuses on hydrogeological evaluation, aquifer analysis, well design matching the existing casing depth and sanitary seal standards per AWWA guidelines, civil and site engineering for wellhead facilities, bidding assistance, and full-time on-site construction management and hydrogeological oversight during drilling. Phase 2 involves engineering design for well equipping—including architectural, structural, mechanical, electrical, instrumentation, and controls systems—alongside support during bidding and ongoing engineering oversight during construction. Technical specifications require a 24-inch diameter stainless steel Ful-Flo louvered screen compatible with local geology, and all materials must comply with the Build America, Buy America Act and domestic content requirements under 2 CFR Part 184, with documented efforts to source U.S.-produced iron, steel, and manufactured products. The project spans from initiation in November 2026 through completion in May 2028, with a contract value not exceeding $1,000,000, partially funded by a $400,000 Bureau of Reclamation grant requiring adherence to federal administrative, audit, and procurement rules under 2 CFR Part 200. Proposals must include detailed qualifications, resumes of key personnel, relevant municipal water and groundwater project experience, current California professional licensure, DBE subconsultant participation details, and a comprehensive cost proposal broken down by task with hourly rates and incidental costs. Submissions must be made through EVMWD’s PlanetBids portal by the September 1, 2026 deadline and include mandatory certifications for debarment and suspension, lobbying compliance, American Iron and Steel compliance, executive order N-6-22 sanctions screening, insurance acknowledgment, and non-collusion declarations. Evaluation prioritizes demonstrated technical competence and experience (25%), followed by understanding of project objectives (25%), schedule and risk management (20%), innovation (10%), cost value (10%), and overall proposal quality (10%), with the award based on qualifications rather than lowest cost. The consultant must provide monthly progress reports, detailed invoices, and maintain full records for four years post-final payment subject to audit. All

GEI Consultants, Inc.

POSTED

about 10 hours ago

DEADLINE

Design and Engineering of Integrated PA SystemThe contract involves the system design, architectural integration, and development of detailed technical specifications for a district-wide public address system to be implemented across multiple school facilities within North East ISD in Texas. The scope requires comprehensive engineering work to ensure seamless communication capability throughout all designated locations, with strict adherence to life-safety codes and industry standards to guarantee reliability in emergency situations. The project demands coordination with existing infrastructure and future expansion plans, requiring expertise in acoustic planning, network integration, and fail-safe communication protocols. This is a subcontract opportunity under NAICS code 541330, which pertains to architectural, engineering, and related services. The solicitation was posted on August 7, 2026, with responses due by August 27, 2026. All work must be performed within the district’s jurisdiction, and contractors are expected to demonstrate proven experience in large-scale educational facility deployments. The contract does not specify a set-aside program, and while no point of contact is listed, all inquiries and submissions must follow the process outlined through the provided online portal.

POSTED

about 14 hours ago

DEADLINE

A/E RFQ - Ballistic Aero-Optics and Materials Range Phase 2 - Bryan, Texas

Solicitation # TAMUS-RFQ-01-3489

The Texas A&M University System, through its Office of Facilities Planning & Construction, is seeking qualified Architect/Engineer firms to support the Ballistic Aero-Optics and Materials Range Phase 2 project at the RELLIS Campus in Bryan, Texas. This initiative expands upon a facility completed in 2024 to significantly enhance capabilities in aero-optics and hypersonic testing, including extending aero-optics performance beyond 1,000 meters and hypersonic testing beyond 500 meters, while doubling the recovery tube length from 305 meters to approximately 610 meters. The project calls for the design and construction of critical infrastructure components including a new Tail Building at the south end of the range to house the relocated Laser Firing Tank and final sections of the recovery tube, as well as at least two additional test buildings aligned with project test sections. Standardized 14.6-meter range tube sections will be used throughout the expansion. The total planning budget for the project is $70,605,000, with $17,129,803 allocated specifically for the construction contract, while the remainder covers fees, furnishings, contingencies, and related expenses. Selection will proceed through a qualifications-based process where firms submit statements of qualifications via the e-Builder portal by 2:00 p.m. Central Time on September 1, 2026. The top-ranked respondents may be invited to present their qualifications in an interview, but no pricing or cost information is solicited at this stage. All firms must complete the State of Texas Subcontracting Plan form, for which guidance and a tutorial are provided by the system’s Office of Procurement & Business Services. Inquiries must be directed to Jeff Herring at the Texas A&M University System Office of Facilities Planning & Construction, with contact information provided for phone and email. The solicitation is issued under NAICS code 541330 and administered by a state educational agency with no set-aside provisions identified.

Texas A&M University System

POSTED

about 14 hours ago

DEADLINE

Transportation and Economic Corridors - Request for Proposal - CON0025815-OVERLAYS of HWY 49:06 and HWY 49:08

Solicitation # AB-2026-05586

Alberta Transportation and Economic Corridors is soliciting proposals from three pre-qualified firms—Associated Engineering Alberta Ltd., Progressive Engineering and Consulting Ltd. (dba CAP Engineering), and ISL Engineering and Land Services Ltd.—for comprehensive engineering services on two sections of Highway 49: Overlay limits 34.946 to 52.425 (WAC0077705) and 0.000 to 2.486 (WAC0077705). The scope includes preliminary engineering, detailed design, contract tendering, contract administration, construction supervision, post-construction review, and warranty inspections. Proposals must be submitted in two separate PDF files under 10 MB each: one detailing technical qualifications and the other containing the proposal fee. This is a Request for Proposal, not an Invitation to Tender, and only submissions from the listed firms will be considered. Alberta Transportation and Economic Corridors reserves the right to request clarifications, accept or reject proposals without negotiation, or negotiate changes with the selected firm. There is no reimbursement for proposal preparation costs. Selection will be based on overall value, not simply the lowest price. The deadline for submissions is September 2, 2026, at 5:30 AM MT, and inquiries should be directed to Rence Balaccua, Project Procurement Officer.

Transportation and Economic Corridors

POSTED

about 17 hours ago

DEADLINE

Construction Engineering & Inspection (CEI) ServicesThe contract is for Construction Engineering & Inspection services encompassing onsite inspection, materials testing, and quality assurance and quality control activities related to road, grading, and utility construction projects. It is issued as a subcontract under NAICS code 541330 by the Development Authority of Dawson County in Georgia, with a posted date of August 7, 2026, and a mandatory response deadline of September 7, 2026. The scope requires qualified contractors to provide technical oversight throughout all phases of construction, ensuring compliance with engineering standards and specifications. Performance will occur at unspecified locations within Dawson County, and while the exact point of contact and physical address details are not provided, interested parties must submit proposals through the designated state portal by the stated deadline.

Development Authority of Dawson County

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Civil Site Engineering & Grading DesignThe contract entails the comprehensive design and engineering services for the site grading, access roads, and overall layout of a 200,000 square foot industrial park, with a strong emphasis on integrating topographic data and accurate earthwork calculations to ensure proper land transformation and infrastructure alignment. The scope requires detailed civil site engineering expertise to translate terrain conditions into practical, buildable designs that meet regulatory and functional standards for industrial development. The work is solicited as a subcontract under NAICS code 541330, with a response deadline of September 7, 2026, and is managed by the Development Authority of Dawson County in Georgia. The project is set to be performed on-site within Dawson County, though specific location details are not provided. The contract was posted on August 7, 2026, and no set-aside provisions or point of contact information are indicated, leaving potential bidders to engage directly through the provided online portal for further instructions and submissions.

Development Authority of Dawson County

POSTED

about 17 hours ago

DEADLINE

in about 1 month

RFQ for Engineering and Construction Services

Solicitation # BIP-0001-2026-R

The Dawson County Development Authority is seeking qualified consulting firms or teams to submit Statements of Qualifications for engineering and construction services related to the Business and Innovation Park Project, a major development encompassing approximately 200,000 square feet of buildings along with comprehensive site improvements including grading, roads, utilities, stormwater management, erosion control, environmental assessments, and archaeological evaluations. The project also requires offsite infrastructure extensions, specifically a water main connection to the City of Dawsonville’s existing water system and a sanitary sewer lift station with a force main linked to the city’s sewer network. This solicitation does not involve any immediate work but serves as a pre-qualification process to identify capable consultants for future contract awards. Proposals must be submitted by September 7, 2026, and are to be directed to Mandy Power at the Development Authority of Dawson County, with all information available through the provided state portal link. The solicitation is open to any qualified firm without set-aside restrictions and is classified under a state-level procurement process.

Development Authority of Dawson County

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Preconstruction ServicesThe contract involves providing comprehensive preconstruction services for a project managed by the Georgia Institute of Technology, with responsibilities including detailed planning, accurate cost estimating, development of realistic scheduling timelines, and value engineering initiatives conducted in close coordination with the design team to optimize efficiency and budget alignment. These services are critical to laying the foundation for successful project execution by identifying potential risks, reducing cost overruns, and enhancing design functionality before actual construction begins. The solicitation is classified as a subcontract under NAICS code 541330, which pertains to architectural, engineering, and related services, and the response deadline is set for August 28, 2026, with the posting date indicating a forward-looking procurement cycle beginning in August 2026. The place of performance and organizational details are not fully specified, but the agency’s name and the nature of the services confirm the project’s institutional context within an academic and research infrastructure environment.

Georgia Institute of Technology

POSTED

about 18 hours ago

DEADLINE

Pre-Delivery Inspection and Commissioning ServicesThe contract requires comprehensive pre-delivery inspection, safety verification, and functional commissioning of an excavator to ensure all core operational capabilities—digging, lifting, and dumping—are fully functional and meet specified standards before acceptance. This process must be conducted either at the manufacturer’s facility or on-site, depending on logistical arrangements, and must include rigorous testing protocols to validate performance under real-world conditions. All safety systems and mechanical functions must be reviewed and certified as compliant with industry and operational expectations. The solicitation is issued under the NAICS code 541330, indicating it pertains to engineering services, and is classified as a subcontract through the Texas Department of Transportation’s procurement portal. The deadline for responses is set for August 28, 2026, with the posting date reflecting an early solicitation window allowing ample time for preparation. The place of performance and direct point of contact are not specified, suggesting flexibility in execution location, but all work must be completed and documented to satisfy TexasDOT’s requirements prior to final delivery acceptance.

Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → FA4659 319 Cons Pk

Same awarding agency

Operations & Maintenance Training DeliveryThe contract requires the delivery of hands-on training to military personnel focused on the operation, preventative maintenance, start and stop procedures, and failover protocols of the CRAC system. Training must be conducted in a practical, interactive format to ensure proficiency and readiness. In addition to instruction, the contractor is responsible for developing a comprehensive Operations and Maintenance manual that serves as a standardized reference for system users and support teams. Competency verification is a critical component, requiring formal assessments to confirm that all trainees meet established performance standards before certification. The training activities are to be performed at Grand Forks Air Force Base with the work addressing the needs of the Department of Defense through its 319 Cons Pk organization. This subcontract is categorized under NAICS code 611512, indicating it relates to professional and commercial training services. The solicitation was posted on August 7, 2026, with proposals due by 6:00 PM on August 14, 2026. While specific point of contact details are not provided, the place of performance is clearly defined and all deliverables must align with the operational requirements of the military unit at this location.

Flight Training

POSTED

DEADLINE

24/7 Emergency Maintenance and Preventative ServiceThis contract mandates the provision of comprehensive 24/7 emergency repair services and scheduled preventative maintenance for a period of four years following system installation, ensuring continuous operational uptime and rapid response to any failures. The scope includes routine system inspections, immediate failure response protocols, and proactive maintenance activities designed to prevent unplanned outages and maintain system integrity over the full term. Work must be performed at Grand Forks Air Force Base, South Dakota, with a zip code of 58204, and the contract is classified as a subcontract under the NAICS code 811310, which pertains to other commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on August 7, 2026, with a hard deadline for responses set for August 14, 2026, at 6:00 PM. The contracting activity is under the Department of Defense, specifically linked to the FA4659 319 Cons Pk office, and is seeking qualified subcontractors capable of meeting stringent availability and performance standards. All services must be delivered without interruption, with a focus on reliability, rapid resolution of critical issues, and adherence to preventative schedules to ensure optimal system performance throughout the contract duration.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Legacy Equipment Disposal and Environmental ComplianceThe contract encompasses the safe removal, handling, and environmentally compliant disposal of legacy CRAC units, associated piping, pumps, and fluid solutions including refrigerants and glycol mixtures, ensuring adherence to all applicable environmental regulations. Work must be performed at Grand Forks Air Force Base with a strict focus on minimizing ecological impact and following federal guidelines for hazardous material management. The subcontract is solicited under NAICS code 562910 and is part of a Department of Defense initiative aimed at modernizing infrastructure while maintaining regulatory compliance. Responses are due by August 14, 2026, with the opportunity posted on August 7, 2026, and performance is expected to be conducted entirely at the specified location with no alternative sites permitted.

Remediation Services

POSTED

DEADLINE

HVAC System Replacement and InstallationThe contract entails the complete removal and disposal of existing legacy CRAC units, pumps, dry coolers, and associated piping at Grand Forks AFB, ensuring proper environmental handling of all decommissioned equipment. In their place, two new 8-ton redundant CRAC units featuring autonomous control systems will be installed alongside new dry coolers, redundant pumps, and a fully updated piping network designed to circulate glycol-based coolant, enhancing system reliability and efficiency. All new components must meet stringent performance and integration standards to ensure seamless operation within the facility’s existing infrastructure. The work is classified under NAICS code 238220 for mechanical contracting and is issued as a subcontract by the Department of Defense through the FA4659 319 Cons Pk office. The solicitation was posted on August 7, 2026, with responses required by August 14, 2026, at 6:00 PM. The place of performance is strictly limited to Grand Forks Air Force Base with a ZIP code of 58204, and all contractors must comply with federal requirements for defense-related installations, including timelines, safety protocols, and disposal regulations for hazardous materials.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

COMPUTER ROOM AIR CONDITIONER (CRAC) REPLACEMENT at GRAND FORKS AFB, ND

Solicitation # FA465926QZ019

The U.S. Air Force is seeking market information for the replacement of Computer Room Air Conditioning (CRAC) units at Grand Forks Air Force Base, North Dakota, through a sources sought notice under SAM ID FA465926QZ019. The requirement calls for the removal and proper disposal of existing legacy CRAC units, associated pumps, and dry coolers, with all materials becoming the contractor’s property and being disposed of in full compliance with environmental regulations. Two new 8-Ton CRAC units with multi-stage cooling must be installed, each featuring independent control systems and capable of maintaining a temperature range of 60 to 70 degrees Fahrenheit and a relative humidity of 40% to 50%. The systems must operate using a 40% inhibited propylene glycol and 60% reverse osmosis water solution and include newly installed, appropriately sized dry coolers, redundant pumps, and new piping per manufacturer specifications. Movable ductwork must be provided to enable rapid connection of the backup unit to the mission-critical environment. The contractor is also required to deliver operations and maintenance manuals, train 319 AMXS personnel on maintenance and failover procedures, and provide four years of 24/7 emergency repair services along with scheduled preventative maintenance aligned to manufacturer guidelines. The government is evaluating both purchase and rental options, each with a bundled four-year maintenance plan, and requests separate cost estimates for both. All responses must include the vendor’s organization name, SAM UEI, CAGE code, business type, small business status under NAICS 238220, point of contact details, projected delivery timeline, and any applicable government contract vehicle numbers. The submission must be a concise capabilities package not exceeding five pages, demonstrating the firm’s ability to meet all technical, logistical, and service requirements, including any teaming or subcontracting arrangements. While priority is given to registered small businesses under NAICS 238220, all qualified vendors are encouraged to respond. Proposals must be emailed to the designated contacts no later than August 14, 2026, at 1:00 PM CST. This notice is not a solicitation, and no compensation will be provided for response costs; information gathered will inform the ultimate procurement strategy.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Protective Coatings Indefinite Delivery Requirements Contract

Solicitation # FA465926R0002

Painting and Wall Covering Contractors

POSTED

DEADLINE

Grand Forks AFB Dorm Furniture

Solicitation # FA465926QZ016

The 319th Contracting Squadron at Grand Forks Air Force Base, North Dakota, is conducting market research through a sources sought notice to identify qualified small businesses capable of providing dormitory furniture, assembly, and installation services for Building 221. This effort is a Small Business Set Aside - Total under NAICS code 337121 for Upholstered Household Furniture Manufacturing and PSC 7105 for Household Furniture. Respondents must provide estimated lead times and demonstrate capability to deliver and install a full suite of furniture, fixtures, and equipment as outlined in Appendix 2, which includes items such as desks, headboards, nightstands, entertainment centers, refrigerators, and lounge sofas—all in new, undamaged condition and meeting commercial standards like BHMA Grade 1 hardware, SFI-certified wood, low-VOC finishes, and SCS Indoor Advantage Gold certification. All work must be performed on site at Grand Forks AFB, with delivery required within 60 days after receipt of order and installations completed within 10 duty days for individual task orders. Contractors are responsible for shipping costs to CONUS, Alaska, Puerto Rico, and Hawaii, and must comply with strict packaging, handling, and inspection protocols using standardized condition codes on Bills of Lading. Contractors must be registered with a valid CAGE Code and declare their small business status, including any applicable socioeconomic designations such as 8(a), HUBZone, WOSB, or SDVOSB. They are required to submit three past performance references, disclose any intended subcontracting percentages and subcontractor size status, and describe any teaming arrangements. All personnel must obtain base access clearance through Grand Forks AFB’s Pass and Registration Office, wear company-branded ID badges, and adhere to strict work hours (0730–1700 local time, Monday–Friday), with no weekend or holiday work permitted without approval. The contractor assumes full liability for damage to government property during transport or installation and must remove all packaging materials and leave the site clean. Submissions, limited to five pages, must be sent via email to the designated points of contact by the deadline of August 10, 2026, and include certification of compliance with OSHA standards and federal requirements. No contract value, pricing, or formal contract type is specified, as this is a market research action to determine procurement methodology, not a solicitation for award.

Upholstered Household Furniture Manufacturing

POSTED

DEADLINE

Consumables and Parts SupplyThe contract entails the supply of OEM or certified replacement parts and consumables required for the maintenance of ASM equipment, with specific components including filters, hoses, seals, blasting media, and other materials that must comply with NESHAP and ACGIH standards to ensure environmental and occupational safety. All supplied items must meet stringent performance and quality requirements to support continuous and safe operation of the equipment at the designated performance location. The solicitation is structured as a subcontract under a Small Business Set Aside designation, explicitly reserved for small businesses, and is classified under NAICS code 423830, which corresponds to wholesale trade of hardware, plumbing, and heating equipment and supplies. The opportunity was posted on August 3, 2026, with a response deadline of August 28, 2026, at 3:00 PM, and the work will be performed at Grand Forks Air Force Base, North Dakota, with a zip code of 58205. The contracting activity is under the Department of Defense, specifically the FA4659 319 Cons Pk organization, and interested parties must submit proposals through the provided SAM.gov link before the stated deadline.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Electrical and VFD Exhaust System MaintenanceThis contract covers the routine maintenance of electrical components and variable frequency drive exhaust systems for paint and sanding booths, requiring comprehensive inspections and testing of motors, control panels, wiring, and exhaust fan performance to ensure operational reliability and safety. The work includes diagnostic evaluations, preventive checks, and performance verifications to maintain compliance with facility standards and support uninterrupted production processes at the designated site. The solicitation is designated as a Small Business Set Aside under NAICS code 238210 and is issued by the Department of Defense under the FA4659 319 Cons Pk office, with performance required at Grand Forks Air Force Base, ZIP 58205. Bidders must submit responses by August 28, 2026, at 3:00 PM, and the contract type is structured as a subcontract. The opportunity is publicly accessible through the SAM.gov portal, and all work must be performed in accordance with federal contracting requirements specific to small business participation.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Facility Compressed Air System MaintenanceThe contract titled Facility Compressed Air System Maintenance requires comprehensive preventative maintenance services for compressed air systems located at Grand Forks Air Force Base, with a zip code of 58205. The scope includes routine servicing of critical components such as air dryers, filters, moisture traps, and distribution piping, with specific tasks encompassing filter replacement, leak detection, and pressure testing to ensure system efficiency, safety, and compliance. All work must be performed in accordance with established maintenance protocols to minimize downtime and maintain optimal air quality and pressure levels across the facility. This is a Small Business Set Aside contract under NAICS code 811411, reserved exclusively for small businesses, and is classified as a subcontract under the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 28, 2026, at 3:00 PM. Performance of the contract will occur at the specified location in Grand Forks AFB, and interested parties must submit proposals prior to the deadline to be considered for award. The contract does not list a point of contact, and all inquiries should be directed through the official SAM.gov portal linked in the posting.

Home and Garden Equipment Repair and Maintenance

POSTED

DEADLINE

Blasting Media Cabinet Servicing and MaintenanceThe contract pertains to the preventative and corrective maintenance of blasting media cabinets, requiring regular inspections of wear components, verification of media delivery systems, seal integrity testing, and timely replacement of degraded or damaged parts. All services must adhere strictly to established safety protocols and environmental regulations to ensure operational readiness and regulatory compliance. The work involves a detailed assessment of cabinet performance and component longevity, with an emphasis on minimizing downtime and maintaining system efficiency. This subcontract is designated as a Small Business Set Aside under NAICS code 811490 and is issued by the Department of Defense through the FA4659 319 Cons Pk office. The place of performance is located at Grand Forks Air Force Base with a zip code of 58205. Responses are due by August 28, 2026, and the solicitation was posted on August 3, 2026. All contractors must be certified as small businesses to qualify for this opportunity.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Paint Booth and Sanding Booth Preventative MaintenanceThe contract outlines a quarterly preventative maintenance service for paint and sanding booths at Grand Forks Air Force Base, ensuring ongoing compliance with OEM, ACGIH, and NESHAP standards. Services include thorough inspections, cleaning, replacement of filtration components, air quality testing, and execution of minor repairs to maintain operational efficiency and regulatory adherence. The work is scheduled on a recurring quarterly basis and must be performed in accordance with industry best practices to safeguard personnel and environmental health. This is a small business set aside subcontract under NAICS code 811490, reserved exclusively for small business concerns as defined by the SBA. The solicitation was posted on August 3, 2026, with a response deadline of August 28, 2026. Performance is required at the Department of Defense facility located at Grand Forks AFB, North Dakota, with a zip code of 58205. The contract does not specify a point of contact, and all submissions must be managed through the SAM.gov platform using the provided link.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE