Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Acceptance Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Quality Inspection and Acceptance Support subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on rigorous pre-shipment inspection and testing. The primary objective is to ensure zero non-conformances by adhering to MIL-STD-1916 or ASQ Z1.4 standards, providing the necessary quality assurance required for formal government acceptance. Classified under NAICS code 541380, this agreement mandates the delivery of comprehensive documentation to verify that all materials meet strict military specifications. The contract ensures that all deliverables are thoroughly vetted for compliance before shipment to maintain the integrity of the defense supply chain.

General Info

DLA subcontract for pre-shipment quality inspection and testing to ensure military specification compliance.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A626F224A.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INSULATION SLEEVING, ELECTRICAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 30

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Pre-shipment inspection and testing to ensure zero non-conformances per MIL-STD-1916 or ASQ Z1.4, with full documentation for government acceptance.

Similar Contracts

Same NAICS industry code

Stability Testing for ManNAc Drug Product produced in Campaigns 5 and 6. Stability testing will occur under regulatory compliance

Solicitation # 75N98027Q00040

National Institutes Of Health Olao

POSTED

about 2 hours ago

DEADLINE

J065--RO Equipment Maintenance

Solicitation # 36C25027Q0051

Solicitation 36C25027Q0051 is a request for quotes for a firm-fixed-price contract to provide preventive and non-routine emergency maintenance services for reverse osmosis equipment systems at the Ann Arbor VA Medical Center in Michigan. The scope of work covers systems serving the Laboratory Department and Sterile Processing Service, requiring adherence to OEM instructions and AAMI standards. The anticipated period of performance begins January 8, 2027, and extends through January 7, 2032, consisting of a one-year base period and four optional one-year extensions. This procurement is 100% set aside for small businesses under NAICS code 541380. The government will evaluate offers based on technical capability and past performance, with the total evaluated price including all option years and a six-month extension under FAR 52.217-8. Offerors must be registered in the System for Award Management and submit their quotes electronically to the contracting officer. Required submission documents include a signed SF1449, a strict adherence to the price schedule, and a past performance list from the last three years. Technical volumes are limited to ten pages. Awarded contractors must ensure personnel complete mandatory VA privacy and security training and provide all necessary certifications within three business days of the award.

250-NETWORK Contract Office 10 (36C250)

POSTED

about 2 hours ago

DEADLINE

Stainless Steel Surface and Coating Inspection ServicesThis subcontract for Stainless Steel Surface and Coating Inspection Services supports seismic retrofit projects for the Golden Gate Bridge District in California. The selected provider will perform critical surface and coating testing for prime contractors, specifically focusing on the composition and profiles of abrasives and roughness testing for production stainless steel faying surfaces. Additionally, the scope includes the inspection of cleaning processes and the application of dielectric coatings. To qualify for this engagement, personnel must hold professional certification in coating inspection from NACE or SSPC. The contractor is responsible for delivering detailed material inspection reports and surface profile logs to ensure quality control. Interested parties must submit their responses by the deadline of December 1, 2026.

Golden Gate Bridge District

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) Services for Stainless Steel FabricationThis subcontract involves providing specialized non-destructive testing services for stainless steel fabrication as part of the Golden Gate Bridge seismic retrofit projects. The scope of work includes performing Magnetic Particle, Penetrant, and Ultrasonic testing on energy dissipation devices, as well as conducting redundant quality control inspections and verifying welding preparation and fit-up. The contractor is required to utilize an ASNT Certified Level III inspector for the preparation of the NDT plan and must deliver comprehensive test reports and non-conformance documentation. This opportunity is issued by the Golden Gate Bridge District under NAICS code 541380, with a response deadline set for December 1, 2026.

Golden Gate Bridge District

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

about 15 hours ago

DEADLINE

GOLDEN GATE SUSPENSION BRIDGE SEISMIC RETROFIT CONTRACT 1 NORTH AND SOUTH TOWERS AND NORTH AND SOUTH SIDE SPANS ENERGY DISSIPATION DEVICE INSPECTION SERVICES

Solicitation # 2026-B-038

The Golden Gate Bridge, Highway and Transportation District is soliciting a Professional Services Agreement under solicitation 2026-B-038 for energy dissipation device inspection services as part of the Golden Gate Suspension Bridge Seismic Retrofit Contract 1. The selected consultant will provide a Contract Manager and Stainless Steel Fabrication Shop Inspectors to perform quality assurance and fabrication inspections at a steel fabrication shop located in the Birmingham, Alabama area. Key responsibilities include reviewing welder qualifications, welding procedure specifications, and procedure qualification records, as well as performing non-destructive testing and implementing Quality Assurance Inspection Work Plans. Deliverables include weekly fabrication reports, material inspection reports for every shipment, and a comprehensive health and safety plan. The award process is based on a 100-point evaluation of the Statement of Qualifications and Proposal, focusing on firm qualifications and experience (40 points), team qualifications (30 points), and project understanding and approach (30 points). The top three ranked proposers will be interviewed before a final selection is made. The contract utilizes a cost-plus-fixed-fee payment structure, with a planned execution date of February 1, 2027, and a notice to proceed on February 16, 2027. Compliance requirements are extensive, including adherence to California Labor Code prevailing wages, DBE participation under 49 CFR Part 26, and various fair employment and non-discrimination certifications. Proposers must submit their SOQ&P by December 1, 2026, exclusively through electronic means.

Golden Gate Bridge District

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

about 16 hours ago

DEADLINE

Hazardous Waste Sampling and Profiling ServicesThis subcontract for Hazardous Waste Sampling and Profiling Services supports prime contractors on OC Waste and Recycling projects in California. The selected provider will perform chemical analysis and categorization of unknown or regulated waste streams, utilizing field sampling and specialized laboratory equipment such as Draeger pumps and OVA/HNU monitors to identify contaminants. All operations must be conducted by a certified environmental laboratory that maintains full compliance with California Code of Regulations Title 22. The primary deliverables for this engagement include detailed waste profile reports and formal categorization documentation. Interested parties should note that the response deadline is November 25, 2026, and the services fall under NAICS code 541380.

OC Waste & Recycling

POSTED

about 17 hours ago

DEADLINE

Certified Independent Concrete Testing Laboratory ServicesThis subcontract for Certified Independent Concrete Testing Laboratory Services involves providing independent quality control testing for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the securing of samples according to ASTM C 172, the curing of specimens per ASTM C 31, and the execution of compressive strength tests on cylinders to ensure a design strength of 7,000 psi. The selected provider is responsible for delivering all necessary certified test reports and comprehensive QA/QC documentation. This opportunity falls under NAICS code 541380, with a response deadline set for November 17, 2026.

Maryland Transit Administration

POSTED

about 18 hours ago

DEADLINE

Environmental & Material Testing ServicesThis subcontract opportunity for Environmental and Material Testing Services supports prime contractors working on historic facility projects within Warren County, Virginia, specifically in Front Royal. The selected provider will be responsible for conducting comprehensive material testing and identifying hazardous substances, including lead and asbestos, while performing necessary environmental reviews. To qualify, contractors must possess the required certifications for environmental sampling and laboratory analysis. Key deliverables for this engagement include detailed material testing reports and the provision of environmental clearance or remediation plans. Interested parties must submit their responses by November 19, 2026.

POSTED

about 18 hours ago

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

about 19 hours ago

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690016685478)

All Other Miscellaneous Manufacturing

POSTED

about 21 hours ago

DEADLINE

Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.

Paint and Coating Manufacturing

POSTED

about 21 hours ago

DEADLINE

Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.

Fabricated Structural Metal Manufacturing

POSTED

about 21 hours ago

DEADLINE

Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

Packaging and Labeling Services

POSTED

about 21 hours ago

DEADLINE

Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.

Freight Transportation Arrangement

POSTED

about 21 hours ago

DEADLINE

Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.

Sheet Metal Work Manufacturing

POSTED

about 21 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Non-Destructive Testing (NDT) Services for Aerospace Components

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Sample Submission Services

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Material Labeling and Compliance Services

Defense Logistics Agency

POSTED

DEADLINE

Production Lot Testing (Government) Services

Defense Logistics Agency

POSTED

DEADLINE

Government First Article Testing (FAT) Services

Defense Logistics Agency

POSTED

DEADLINE

Radioactive Materials Notification and Compliance

Defense Logistics Agency

POSTED

DEADLINE

Production Lot Testing (PLT) Services

MARITIME SUPPLY CHAIN

POSTED

CLOSED

Government First Article Testing Services

Defense Logistics Agency

POSTED

DEADLINE

Product Verification Testing (PVT) Sample Preparation

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Military Specifications Compliance

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Aerospace Quality Assurance and Inspection Services (Origin Acceptance)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS