This Government Contract opportunity from Nebraska was posted on August 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quality Testing and Standards Compliance Validation

Closed

State & Local

Submission Closed08/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is seeking quotes for a subcontracting opportunity to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing materials from floor tiles in the Gymnasium, Warehouse, and Warehouse Storage Area, totaling approximately 4,200 square feet. All work must be performed by contractors holding all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. This fee-for-service solicitation is open to various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Bids must be submitted via email by October 21, 2026, and must include a completed bid sheet, supplier packet (W-9, self-certification, and acceptance of terms), proof of insurance, and three references for similar projects. Award selection will be based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes strict requirements for information security, Department of Labor records management, and the provision of waste shipment records and a final project completion report.

POSTED

DEADLINE

Chemical Fume Hood and Biosafety Cabinet CertificationThis subcontract involves the annual certification and calibration of laboratory airflow containment systems for prime contractors working on Mississippi Department of Public Safety projects. The scope of work includes the testing and certification of 43 chemical fume hoods and 5 biosafety cabinets, utilizing specialized airflow anemometers and HEPA filter testing equipment. The selected provider is required to deliver formal certification reports and apply calibration stickers to all tested units. To qualify for this engagement, the contractor must hold ISO/IEC 17025 accreditation specifically covering field calibrations and airflow containment. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 10, 2026.

MS DEPT of PUBLIC SAFETY

POSTED

DEADLINE

First Article Testing and NDI Services for F100 ContainersThis subcontract involves providing specialized testing and inspection services for F100 containers under DLA Aviation at Oklahoma City. The scope of work requires the performance of dimensional inspections using NIST-traceable tooling, visual audits based on USAF standards, and non-destructive inspection methods such as X-ray or Dye Penetrant. The final deliverable for these services is a completed First Article Test Report. To ensure compliance and quality, the contractor must employ certified NDI technicians and adhere to ISO 10012-1 calibration standards. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties must submit their responses by November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Ultrasonic InspectionThis subcontract involves providing specialized non-destructive testing and ultrasonic inspection services for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The scope of work includes performing dye penetrant inspections on valve body weld ends and ultrasonic inspections on starting materials, adhering to specific technical standards including T9074-AS-GIB-010/271, S9074-AR-GIB-010A/278, and MIL-STD-2132. A critical requirement for this contract is that the service provider must be an approved source for Critical Safety Item testing. The successful contractor is responsible for delivering certified NDT and Ultrasonic Inspection Reports. The opportunity is categorized under NAICS code 541380, with a response deadline set for November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Steam Jacketed Kettle Hydrostatic TestingThis subcontract involves performing hydrostatic pressure testing for prime contractors on vessel repair projects managed by the Navsup Flc Sigonella Naples Office. The scope of work requires the use of hydrostatic pumps, pressure gauges, and testing manifolds to pressurize steam jacketed kettles with water to identify leaks and structural deformation. All activities must be conducted in strict accordance with Reference 65111-3-009 Rev A/1 and FAR 52.246-1. The selected provider is responsible for delivering a formal hydrostatic test report and a certification confirming the integrity of the kettles. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense. Interested parties should note the response deadline of October 15, 2026.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Flight Critical Component NDT InspectionThe Flight Critical Component NDT Inspection subcontract involves providing independent non-destructive testing for prime contractors on DLA Aviation projects. The primary objective is to verify the structural integrity of regulating valves through a 100% inspection of critical characteristics. Approved testing methodologies include ultrasonic, radiographic, or liquid penetrant methods to ensure the highest safety and quality standards for flight critical components. To qualify, service providers must maintain ISO 9001 certification and employ technicians certified at NDT Level II or III. The successful contractor is responsible for delivering both certified NDT inspection reports and the certified components. This opportunity is managed by the Department of Defense through the Pa DLA Aviation At Philadelphia office under NAICS code 541380, with a response deadline of October 20, 2026.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Hydrostatic and Non-Destructive Testing (NDT)This subcontract for Navsup Weapon Systems Support Mech involves performing critical safety testing for prime contractors. The scope of work includes conducting hydrostatic testing according to drawing G985455 and non-destructive testing on weldments. All testing must be performed using calibrated gauges that comply with MIL-STD-45662 or ISO10012-1 standards. To be eligible, the provider must hold ISO/IEC 17025 accreditation. The contract requires the delivery of test certification reports in accordance with CDRL DI-MISC-S08678. This opportunity falls under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

NETA Certified Electrical Power Distribution System TestingThis SDVOSB sole source subcontract, managed by the Department of Veterans Affairs Network Contract Office 15, involves NETA Certified Electrical Power Distribution System Testing for medical center projects in Marion. The scope of work requires the maintenance, inspection, adjustment, and tri-annual electrical testing of critical infrastructure, including 325 electrical panels, 135 transformers, 220 switches, 6 generators, and 25 automatic transfer switches. To ensure compliance and safety, all work must be performed by NETA-certified technicians under the guidance of a Supervising Field Service Engineer. The project must strictly adhere to NETA 2019, NFPA 70E, and VHA Directive 1028 standards, with a requirement for the delivery of comprehensive maintenance and testing reports. The response deadline for this opportunity is November 9, 2026.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

First Article Testing and Certification ServicesThis subcontract for First Article Testing and Certification Services supports prime contractors on DLA Land Warren projects within the Department of Defense. The scope of work involves executing rigorous testing protocols for light-transmitting indicating panels to validate manufacturing processes in accordance with the Technical Data Package and FAR 52.209-3. Using precision measurement equipment, the contractor must verify that all hardware meets strict specifications and deliver a government-approved First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in Warren. To ensure the highest level of quality and consistency, the contractor is required to adhere to ISO 9001:2015 quality standards. The solicitation was posted on October 9, 2026, with a response deadline of November 9, 2026.

POSTED

DEADLINE

Production Lot Testing and Inspection ServicesThis subcontract for Production Lot Testing and Inspection Services supports the Department of Defense through Navsup Weapon Systems Support Mech. The selected provider will perform technical testing and inspections for prime contractors to validate production lots, ensuring all work adheres to technical specifications and the 651AS drawing series. Key responsibilities include coordinating government-witnessed testing and maintaining strict compliance with DCMA QAR requirements and DD Form 1423. The primary deliverable for this engagement is an approved Production Lot Test/Inspection Report. Classified under NAICS code 541380, the opportunity was posted on October 9, 2026, with a response deadline of November 9, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Quality ValidationThis subcontract for Non-Destructive Testing (NDT) and Quality Validation supports DLA Aviation projects through the Department of Defense. The selected contractor will perform specialized inspection and testing to validate the structural integrity of Cold Section Modules for prime contractors. Required technical capabilities include the use of specialized equipment to conduct X-ray, Ultrasonic, Magnetic Particle, or Dye Penetrant inspections. To qualify, contractors must hold AS 9100 and ISO 9001:2000 certifications. Key deliverables for the project include detailed inspection reports, certifications of conformance, and validated Receiving Reports. The solicitation was posted on October 9, 2026, with a response deadline of November 12, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Oxygen Clean Precision CleaningThis subcontract opportunity with the Department of Defense, specifically for Pa DLA Aviation At Philadelphia, involves the precision cleaning and testing of components for prime contractors. The scope of work focuses on cleaning components for shipboard oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems. All work must be performed in accordance with MIL-STD-1330 standards, utilizing certified clean-room facilities and specialized contamination testing equipment to deliver certified Oxygen Clean components. The project falls under NAICS code 541380 and requires the contractor to hold a MIL-STD-1330 certification. Interested parties should note that the solicitation was posted on October 9, 2026, with a response deadline set for November 9, 2026.

Pa DLA Aviation At Philadelphia

POSTED

1 day ago

DEADLINE

in 30 days

AI Contract Overview

The Quality Testing and Standards Compliance Validation subcontract, issued by the Lincoln Electric System in Nebraska, requires the performance of comprehensive testing and validation for a complete swage tooling system. The primary objective is to ensure the system adheres to all applicable ANSI, NEMA, IEEE, and ASTM standards, with a requirement for all results to be thoroughly documented. This opportunity was posted on August 12, 2026, with a response deadline of August 27, 2026. The project falls under NAICS code 541380 and is structured as a subcontract to ensure technical compliance and quality assurance for the specified tooling equipment.