This Solicitation opportunity from Government of Canada was posted on March 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

R203125_BPM025784_RFQ_with LOD Hardware and Software Maintenance and Support

Closed

BPM025784/33533International

Submission Closed03/23/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

Laboratory Equipment Installation and Calibration ServicesThis subcontract for Laboratory Equipment Installation and Calibration Services supports Texas A&M AgriLife Research projects. The selected provider will be responsible for the physical installation, setup, and calibration of an automated protein analysis system. Key duties include unpacking and positioning the equipment, calibrating analysis modules and sensors, and conducting comprehensive testing to ensure full operational readiness. To qualify for this engagement, the contractor must possess manufacturer technical certification and utilize specialized calibration tools. The final deliverable is a fully calibrated and operational system. Interested parties should note the response deadline of November 23, 2026, for this opportunity categorized under NAICS code 811210.

Texas A&M AgriLife Research

POSTED

DEADLINE

Actuator Technical Support and Maintenance ServicesThe Actuator Technical Support and Maintenance Services subcontract, issued by Fairfax Water, focuses on providing specialized technical assistance for prime contractors involved in FW actuator procurement projects. The scope of work includes the technical troubleshooting and maintenance of Limitorque actuators utilizing specialized diagnostic tools, as well as the provision of installation instructions and technical drawings that adhere to OEM specifications. The selected provider is responsible for delivering fully functioning systems and detailed maintenance reports. This opportunity is categorized under NAICS code 811210, with a response deadline set for November 23, 2026.

POSTED

DEADLINE

Laboratory Equipment Installation and Calibration ServicesThis subcontract for Laboratory Equipment Installation and Calibration Services involves the installation, leveling, and calibration of automatic concrete compression machines for prime contractors working on Ohio Department of Transportation projects. The scope of work includes unpacking and positioning equipment, calibrating automatic controls and compression sensors, and conducting final tests to ensure operational readiness. The ultimate goal is the delivery of a fully operational and commissioned machine. To ensure warranty validation and technical accuracy, the service provider must hold manufacturer technical certification. This opportunity is associated with the Capital Program Administration of the Ohio Department of Transportation under NAICS code 811210. Interested parties must submit their responses by November 25, 2026.

Dot054500 Capital Program Administration Dotd5, Dot-dept Of Transportation

POSTED

DEADLINE

SANAS Accredited Calibration and MaintenanceThe SANAS Accredited Calibration and Maintenance subcontract, issued by the City of Tshwane, involves providing ongoing maintenance and precision calibration for training equipment projects. The primary objective is to ensure equipment longevity and operational accuracy while strictly adhering to manufacturer warranties. All work must be performed by SANAS-accredited technicians in compliance with ISO/IEC 17025 standards, with the final deliverables consisting of detailed calibration certificates and maintenance logs. This opportunity is based in Tshwane-Pretoria, South Africa, and falls under NAICS code 811210. The solicitation was posted on November 9, 2026, and requires a response by November 24, 2026. Interested parties must meet the specific accreditation requirements to support prime contractors in the execution of these technical services.

POSTED

DEADLINE

Laboratory Instrument Maintenance and Repair (Analytical Chemistry)This subcontract for Laboratory Instrument Maintenance and Repair focuses on providing essential technical support for analytical chemistry equipment within Texas Department of State Health Services lab projects. The scope of work involves performing annual preventative maintenance and corrective repairs specifically for NEXION 2000, NEXION 350 Q, and FIMS 400 Mercury Analyzers. To ensure equipment integrity and adherence to manufacturer specifications, the contractor is required to use only original equipment manufacturer parts when replacing worn components or diagnosing malfunctions. The contractor is responsible for delivering comprehensive documentation, including completed annual maintenance records, detailed troubleshooting reports, and performance testing results. This engagement falls under NAICS code 811210 and is managed through the Texas Department of State Health Services. Interested parties should note the response deadline of December 2, 2026.

Department of State Health Services

POSTED

DEADLINE

Perkin Elmer Equipment Maintenance Contracts for DSHS Lab

Solicitation # HHS0017278V4

The Texas Department of State Health Services is soliciting competitive bids through an Invitation for Bids to establish a service contract for the maintenance and repair of laboratory instruments at the DSHS Lab in Austin, Texas. The scope of work covers critical equipment used for lead screening, biothreat testing, chemical threat testing, and inorganic and radiochemistry testing. The contract requires a strict adherence to manufacturer specifications, mandating the use of Original Equipment Manufacturer parts and prohibiting the use of refurbished parts or subcontracting. Key performance requirements include a one-hour on-site response for emergency services, a three-business-day response for malfunctioning equipment, and a mandatory annual preventative maintenance visit for all instruments. The award will be based on the best value to the State, considering price, performance delivery, and the bidder's ability to meet specifications. Bidders must demonstrate financial solvency and a strong performance history, as those with a CPA Vendor Performance Tracking System grade lower than a C may be rejected. The contract is governed by the Health and Human Services Uniform Terms and Conditions and requires compliance with the Texas Prompt Payment Act and various state and federal anti-discrimination laws. Responses are due by December 2, 2026, with an anticipated contract start date of January 1, 2027.

Department of State Health Services

POSTED

DEADLINE

Ejector Assembly Overhaul and RepairThis subcontract, titled Ejector Assembly Overhaul and Repair, involves the teardown, evaluation, and restoration of Ejector Assemblies for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected provider must restore components to full operational requirements using technical drawings and standard repair practices, specifically ensuring the capability to handle NSN 4320-01-700-4243. All work must comply with DODSSP specifications and adhere to MIL-STD-130, REV N for physical identification and marking. The final deliverable is a fully repaired and functional Ejector Assembly. This opportunity falls under NAICS code 811210 and was posted by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Cryogenic Tank Preventive MaintenanceThis subcontract involves providing annual preventive maintenance for Chart Industries cryogenic tanks used in Department of Veterans Affairs biorepository projects located in Albuquerque, New Mexico. The selected provider will be responsible for executing Basic, Intermediate, and Full service levels to ensure the continued integrity of tissue storage systems. All work must be performed in strict accordance with the original manufacturer performance standards and specifications. The project is managed under the Department of Veterans Affairs Network Contract Office 22 and falls under NAICS code 811210. The primary deliverable is the successful completion of preventive maintenance services for each individual tank unit to maintain operational readiness and compliance with manufacturer requirements.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Level 1 Ball Valve Refurbishment (Repair)This subcontract for the Department of Defense, specifically NAVSUP Weapon Systems Support Mechanicsburg, involves the Level 1 refurbishment and repair of ball valve parts kits. The scope of work includes the teardown, cleaning, and evaluation of parts, followed by the restoration of valve balls and seats to like-new condition through spherical surface finishing. The contractor is responsible for the reassembly of the kits and must provide three refurbished kits under NSN 4820-01-135-9916 along with the required Test Certification. To qualify for this project, the contractor must possess ISO 9001 certification and have access to precision spherical grinding and lapping equipment. The opportunity is categorized under NAICS code 811210, with a response deadline set for December 18, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Circuit Card Assembly (CCA) Repair and ModificationThis subcontract involves the teardown, evaluation, repair, and modification of circuit card assemblies for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes disassembling cards to identify faults, performing component-level repairs according to original manufacturer specifications, and conducting rigorous inspection and testing. Specifically, the contractor must utilize electronics diagnostic equipment and specialized testing rigs for Part 1811791 to deliver repaired and tested CCAs under NSN 5998-01-391-3396. Managed under NAICS code 811210 for the Department of Defense, the project requires strict adherence to CMMC requirements and eligibility to handle export-controlled technical data. Interested parties must submit their responses by December 7, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

BD FACS ARIA FUSION Technical Service & MaintenanceThis subcontract involves providing comprehensive technical service and maintenance for the BD FACS ARIA FUSION 5 Laser Instrument and its associated workstation in support of NHGRI/NIH projects. The scope of work includes two scheduled preventative maintenance visits annually, the installation of software revisions, and onsite emergency repair services with a required response time of two business days. The primary objective is to ensure the flow cytometer system remains fully operational with all maintenance activities thoroughly documented. The contract is managed under the National Institutes of Health within the Department of Health and Human Services, with performance taking place in Bethesda, Maryland. To be eligible, the service provider must hold specific certification to maintain BD Biosciences flow cytometry equipment. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 19, 2026.

National Institutes Of Health Olao

POSTED

DEADLINE

Arjo Huntleigh Patient Lift Maintenance and Emergency RepairThis subcontract involves providing routine preventive maintenance and emergency repairs for Arjo Huntleigh patient lift equipment at the Joseph Maxwell Cleland Atlanta VA Medical Center. Working under prime contractors for the Department of Veterans Affairs, the service provider is responsible for executing maintenance to minimize care disruptions and performing repairs according to OEM specifications. The primary deliverables include fully operational equipment and detailed maintenance logs. To qualify for this engagement, the contractor must hold specific certification to service Arjo Huntleigh OEM equipment. The project falls under NAICS code 811210 and is managed by the Department of Veterans Affairs Network Contract Office 7. Performance of the work will take place in Atlanta, Georgia, within the 30033 zip code area.

247-NETWORK Contract Office 7 (36C247)

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

Shared Services Canada is soliciting bids for the provision of hardware and software maintenance and support for Isilon A200 NAS systems under solicitation number BPM025784/33533. The contract period is scheduled to run from April 1, 2026, to March 31, 2027, with the place of performance located in Canada and Ontario. The scope of work includes the delivery of ProSupport Plus hardware support, software support, Keep Your Hard Drive coverage, and specific SynciQ and OneFS licenses for multiple Dell/Isilon systems as detailed in the deliverables schedule. All interested bidders must register and submit their responses through the Shared Services Canada P2P portal, as submissions via other methods are not permitted and the system will block entries after the closing deadline. The response deadline for this solicitation is March 23, 2026, at 2:00 PM. The P2P portal serves as the mandatory platform for accessing solicitations, receiving amendments, managing contract awards, and processing invoices and payments.

General Info

Hardware and software maintenance for Isilon A200 NAS systems from April 2026 to 2027.

Agency

Government of Canada → Shared Services Canada

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

*Canada *Ontario (except NCR), CAN

Set-Aside

NONE

Documents

sow

High

other

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMar 13

Solicitation

Response DeadlineMar 23

Deadline has passed

Submission Closed

03/23/2026, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Shared Services Canada

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Shared Services Canada

Office AddressN/A

Contacts

Luz Gomez-LozadaPoint of Contact

+1 (555) 000-0000

Full Description

RFQ_with LOD Hardware and Software Maintenance and SupportContract Period: April 1 2026 to March 31 2027Bids must be submitted through the P2P portal by the date and time indicated on page 1 of the bid solicitation. Bidders must register in the SSC P2P portal in order to:
view and access solicitations from SSC; submit a response to a solicitation; receive updates and amendments regarding solicitations; be awarded contracts and receive contract amendments; and submit invoices and receive payment status updates.
To register, please go to https://sscp2pspc.ssc-spc.gc.ca and click “Register Now”.Submission through P2P Mandatory: All bidders must attempt to submit their bids through the P2P portal.Submissions not permitted after Solicitation Closing: After Solicitation Closing, the P2P system will not permit a bidder to submit a bid. SSC R203125_BPM025784_RFQ_with LOD Hardware and Software Maintenance and Support- Amendment 000