Top

Raw Material Supply for Heatshield Component

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331420 - Copper Rolling, Drawing, Extruding, and AlloyingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of high-temperature or aerospace-grade raw materials such as steel alloys for the fabrication of the heatshield stiffener component.

Similar Contracts

Same NAICS industry code

NAICS: 331420

New

DIBBS

WIRE, NONELECTRICALThe contract specifies the procurement of 25 clips of non-electrical copper alloy wire, designated as Alloy 270, with a diameter of 0.064 inches and a total length of 8,468 feet per coil, delivered in whole-foot increments. Each coil must be clearly labeled with adhesive labels on both sides and marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and dimensions. Markings must be legible, durable, and applied via stenciling or stamping without contaminating the material. The wire must conform to ASTM B134/B134M-15 and other referenced standards, and a Certificate of Quality Compliance must accompany every shipment to both the delivery point and the DLA Troop Support Contracting Officer. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking following ASTM B900 and MIL-STD-129R guidelines, including special code ZZ for special requirements. The material must be shipped in compliance with the Qualified Suppliers List for Distributors (QSLD), limiting eligibility to approved suppliers only; non-compliance constitutes an unauthorized substitution with potential criminal penalties. Delivery is split between two CLINs totaling 25 clips, with specific shipment targets in New Cumberland, Pennsylvania, and Tracy, California, and a 70-day delivery window. The contract requires full compliance with all technical, quality, and packaging requirements listed in the DLA Master List of Technical and Quality Requirements, and failure to meet any condition may result in rejection.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

WIRE, NONELECTRICALThe contract specifies the procurement of 17 spools of nonelectrical copper alloy wire, each spool weighing approximately five pounds, with each spool containing 1030 feet of material that is 0.005 inches thick and 0.250 inches wide. The wire is subject to strict control under approved sourcing guidelines outlined in Drawing #10261 CAGE 10138 and is governed by defense-related cybersecurity requirements, including CMMC Level 2 compliance, which mandates either a self-assessment or certification by an accredited third-party assessment organization. Technical data associated with the product is classified as export-controlled under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce, and DFARS 252.225-7048 enforcement applies. Distribution is restricted to DLA contractors who hold valid US/Canada Joint Certification Program credentials, have completed mandatory training on handling defense-controlled technical data, and have been formally approved by DLA authorities. The item is identified by NSN 9525-00-128-1897 and ordered under Purchase Request 7017585487 with a delivery deadline of 167 days after award. The solicitation number is SPE8E4-26-T-1904, issued by the Department of Defense through the Depot Hill office at Hill AFB, with a response deadline of August 3, 2026, and primary contact Pamela Duffey at DLA.

POSTED

DEADLINE

TUBING, NONMETALLICThe contract is for the procurement of one unit of nonmetallic tubing with NSN 4710-01-596-1775 and part number 3402525 from CATERPILLAR INC, under solicitation SPE7L1-26-T-860D. The item must be delivered within five days to Fort Leonard Wood, Missouri, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination. Government identification must be removed from any non-accepted supplies, and class I ozone-depleting chemicals are strictly prohibited; any substitutes require prior approval unless explicitly authorized by specification requirements. All packaging must comply with ASTM D3951 and DLA’s Master List of Technical and Quality Requirements, with markings and labeling following MIL-STD-129. Packaging must adhere to RP001 DLA packaging standards and palletization rules, with the unit of issue as specified. Shipment must be sent via fast, traceable freight—parcel post is forbidden—and must be directed to the designated military shipping address. The required delivery date is July 20, 2026, with a response deadline of August 3, 2026. The NAICS code is 331420, and the contracting agency is the Department of Defense’s Land Supply Chain, managed through the Defense Logistics Agency.

POSTED

DEADLINE

Bent Metallic Tube Manufacturing and SupplyThe contract is for the manufacture and delivery of precision bent metallic tubes identified by NSN 4710015955482, manufactured to meet strict technical specifications established by the Defense Logistics Agency. The supplier must ensure full compliance with all DLA requirements regarding material composition, dimensional accuracy, surface finish, and performance standards, with no deviations permitted. Each component must be appropriately packaged and labeled in accordance with federal and military standards to ensure traceability, handling safety, and readiness for immediate deployment. The finished product must be shipped to the designated delivery point at DLA New Cumberland, Pennsylvania, with all documentation verifying adherence to quality assurance protocols, including certifications of conformance and inspection records. This is a subcontract solicitation under NAICS code 331420, indicating the work falls within the forging and stamping industry sector, and was posted on July 20, 2026, with a firm response deadline of July 31, 2026. The contracting office is the Fluid Handling Division within the Department of Defense, and the place of performance is explicitly set as New Cumberland, with a ZIP code of 17070-5002. All deliveries must be coordinated to meet the specified timeline and location, and failure to meet contractual obligations regarding specification, packaging, labeling, or delivery may result in non-compliance penalties or contract termination. Participation requires proven capability in high-precision metal forming and experience with government defense logistics systems.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Seamless Copper Refrigeration Tubing ManufacturingThe contract requires the manufacture of 10-foot seamless copper refrigeration tubing adhering to strict military specifications, encompassing the entire production process from extrusion through final dimensional verification and packaging preparation. The tubing must meet exacting quality and performance standards to ensure reliability in defense-related refrigeration systems, with all steps rigorously controlled to maintain consistency and compliance. The work involves precision engineering and material handling to deliver tubing that satisfies technical requirements for use in critical military applications. The contract is classified as a subcontract under NAICS code 331420 and is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS, with performance required at Fort Bragg, North Carolina, zip code 28310. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, indicating a tight turn-around for qualified vendors to submit proposals. Interested parties must be prepared to demonstrate capability in producing seamless copper tubing to military standards, including the ability to perform all necessary inspections and packaging procedures in compliance with defense procurement protocols.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

TUBE ASSEMBLY SET, MThis contract is for a single unit of a Tube Assembly Set, M, with NSN 4710-01-589-2585 and part number L4812305-011, procured under solicitation SPE4A0-26-T-3954 by the Department of Defense for delivery to Tinker Air Force Base. The item is designated as a critical application and must comply with stringent technical, quality, and packaging standards referenced from the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 for manufacturers and non-manufacturers. Compliance with MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA-specific packaging requirements is mandatory, with no special marking required. The item must be delivered within five days under FOB Origin terms, with zero tolerance for quantity variance, and inspected and accepted at the destination. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and covered defense information protocols apply. The item is not subject to Item Unique Identification, per DFARS 252.211-7003(c)(1)(i). Delivery must be shipped by traceable freight methods, excluding parcel post, and must include the assigned RDD and project details. The contract mandates the use of authorized DoD units of issue and provides detailed shipping and receiving addresses for Tinker AFB, with a primary point of contact at DLA. The required delivery date is July 13, 2026, and the solicitation response deadline is July 28, 2026. All suppliers must meet the specified quality assurance provisions, test equipment standards, and documentation requirements for source approval, and all documentation must reflect the correct revision of DLA standards in effect on the applicable date. The contract includes no set-aside designation and is issued under NAICS code 331420 for manufacturing of other fabricated metal products.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

TUBE ASSEMBLY, METALThis contract, identified by solicitation number SPE7M1-26-U-4492, is for the procurement of a metal tube assembly with NSN 4710200068279, designated as a Critical Application Item by Armatec Survivability Corp under part number AC86195-18. The contract is structured as an indefinite-delivery contract, binding only upon issuance of a delivery order, with an estimated quantity of 84 units and a maximum ceiling value of $350,000. Delivery is required within 84 days of the award date, FOB Origin, and is subject to strict packaging and labeling requirements governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. All packaging must comply with MIL-STD-129 for marking, labeling, and bar-coding, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The use of Class I ozone-depleting chemicals is strictly prohibited, and substitution requires prior approval unless explicitly authorized by specification. Inspection and acceptance occur at the destination point, with government authorities responsible for both functions under FAR 52.246-2. The contract incorporates numerous FAR and DFARS clauses addressing critical compliance areas including safeguarding contractor information systems, NIST SP 800-171 assessment requirements, unauthorized obligations, payment acceleration for small business subcontractors, substitution of commercial products, and hazard communication for hazardous materials, with mandatory submission of hazard warning labels for non-exempted substances. Offerors are required to provide their Unique Entity Identifier and CAGE code, certify their small business status including specific socioeconomic categories such as HUBZone, SDVOSB, WOSB, or 8(a), and disclose any involvement with covered defense telecommunications equipment under clause 252.204-7016. Proposals must be submitted electronically through the DLA BSM DIBBS portal by the deadline of August 4, 2026, and all invoicing must be processed via WAWF. The contract includes provisions for removal of government identification from non-accepted supplies, notification of radioactive materials prior to delivery, and adherence to transport regulations for sea shipments. No fixed unit prices are specified, and all pricing remains provisional until order issuance, with exact delivery locations and accounting details to be determined upon award.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

TUBE, METALLICThe contract specifies the procurement of one 10-foot length of seamless copper refrigeration tube with a diameter of 0.875 inches and a wall thickness of 0.045 inches, identified by NSN 4710015908456 and part number 2LKJ6 from W.W. Grainger, Inc. The item must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and it is subject to strict prohibitions against the use of Class I ozone-depleting chemicals, which supersede any conflicting specification requirements. A shelf life of 12 months applies and is non-extendable, and the product must comply with DLA packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific packaging and containment codes. Delivery is required within five days of contract award, FOB origin, to the designated military facility at Fort Bragg, North Carolina, with shipping permitted only via traceable freight methods—parcel post is explicitly prohibited. The delivery is non-negotiable with zero variance permitted in quantity, and inspection and acceptance occur at the destination. The contract references a required delivery date of July 17, 2026, and is issued under solicitation SPE7M0-26-T-013E with a response deadline of July 31, 2026, under a federal acquisition framework managed by the Department of Defense’s Maritime Supply Chain ESOC.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

BRAID, WIREThe contract is for 48,400 feet of braid wire, specified as a critical application item, with a single continuous length per 100-foot spool, conforming to CID A-A-59569D Revision D dated 12/09/2019 and the latest revision of MIL-DTL-12000 for preservation and packaging. It is identified by NSN 6145-01-566-0164 and purchase request number 7015606048, under solicitation SPE7M2-26-T-5694, which is a total small business set-aside with NAICS code 331420. Delivery is required within 17 days of award, with shipment FOB origin and a permitted quantity variance of plus or minus five percent. Inspection and acceptance both occur at destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the use of unit pack code U and proper palletization as defined in DLA’s packaging requirements. Preservation methods, wrapping, and cushioning materials are designated as ZZ, indicating vendor selection in accordance with technical standards, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of August 18, 2026, and the original delivery due date set for August 26, 2026. The point of contact for the procurement is Samuel Raco, with full solicitation details and response deadlines specified in the contract data, and all transportation logistics follow prescribed DLA procedures.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

TUBE ASSEMBLY, METALThe contract solicitation SPE7M4-26-T-270T seeks the procurement of seven metal tube assemblies and one first article test unit, with delivery required 474 days after order receipt at Tracy, California, under FOB Origin terms. The item is designated with NSN 0001S00000052 and is governed by stringent technical and quality requirements from the DLA Master List, which supersede all other referenced standards including ASTM D3951 and MIL-STD-129 for packaging, marking, and labeling. Item Unique Identification is waived per customer request, but export control regulations apply due to the presence of technical data subject to ITAR or EAR, requiring compliance with DFARS 252.225-7048, and limiting access to contractors with JCP certification, completed DLA export training, and approved authorization. Performance must adhere to ISO 9001:2015 or equivalent quality systems, with inspection and acceptance conducted at origin by the Government, including Mandatory First Article Testing. The contractor must maintain CMMC Level 2 certification as a C3PAO and comply with DFARS 252.204-7012 for safeguarding Covered Defense Information and reporting cyber incidents, alongside other cybersecurity requirements under NIST SP 800-171. Hazardous materials, including ozone-depleting substances and radioactive materials, are strictly regulated, requiring pre-award submission of Safety Data Sheets and proper labeling per 29 CFR 1910.1200 and MIL-STD-129. All packaging must conform to DLA-specific requirements, and transportation must use U.S.-flagged vessels unless prior waiver is secured. Engineering changes require formal Engineering Change Proposals or Requests for Variance, and electronic invoicing must be submitted via WAWF using approved document types. The solicitation mandates compliance with multiple FAR and DFARS clauses covering employment eligibility, trafficking in persons, sustainable sourcing, whistleblower rights, prohibition of Chinese military company products, and accelerated payments to small business subcontractors. Offerors must certify their size status and socioeconomic category, provide UEI and CAGE codes if applicable, and submit proposals electronically via DIBBS by July 31, 2026. No contract value is disclosed, and the contract type remains undetermined pending award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

TUBE, BENT, METALLICThis contract specifies the procurement of a metallic bent tube identified by NSN 4710-01-595-5482 and part number 129044-59010, supplied by YANMAR AMERICA CORPORATION. A total of 62 units are required, with each unit priced at $62.00, resulting in a total contract value of $3,844. Delivery is due within 167 days from the contract award, with a firm delivery date of January 15, 2027, and the item must be shipped FOB origin. The product is subject to strict compliance with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. The item has a non-extendable shelf life of 72 months, classified as TYPE I, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements. All substitute chemicals must be submitted for approval unless explicitly authorized. Inspection and acceptance occur at the destination, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced in the DLA Master List, and the governing revision is determined by the solicitation issue date. The unit of issue is each (EA), and transportation is governed by DLA procedural notes C19 and C20.

FLUID HANDLING DIVISION

POSTED

DEADLINE

TUBE ASSEMBLY, METALThis contract is for the procurement of two units of a metal tube assembly, identified by NSN 4710016203681 and part number 3847AS249-2, designated as a Critical Application Item requiring heightened quality, traceability, and supply chain controls. The delivery is due within 20 days of award, with FOB Origin terms meaning the supplier assumes all risk and responsibility until the goods are loaded at the origin point. Inspection and acceptance occur at the destination, specifically at Marine Aviation Logistics Squadron 26, MCAS New River, Jacksonville, NC, with no variance allowed in quantity. The item must be packaged in compliance with ASTM D3951 and, more importantly, must adhere strictly to the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards. Packaging and labeling must follow MIL-STD-129, including proper unit of issue marking, Quantity per Unit Pack specifications, and mandatory barcode elements for automated logistics tracking. Palletization must conform to RP001, DLA’s Packaging Requirements for Procurement, and parcels must not be sent via parcel post. Shipment must occur by the fastest traceable means under RDD 777, and ocean transport, if applicable, requires compliance with U.S.-flag vessel regulations unless a formal waiver is obtained. The contract explicitly prohibits the use of any Class I ozone-depleting chemicals, overriding any conflicting specification requirements, and requires prior approval for substitute chemicals unless explicitly authorized. Pricing information is not provided, and the contract value is unconfirmed. The contract incorporates numerous FAR and DFARS clauses addressing employment eligibility, trafficking in persons, sustainable products, hazardous materials identification, cybersecurity (including NIST SP 800-171 and safeguarding covered defense information), export controls, and electronic invoicing via WAWF. Contractor compliance with these clauses is mandatory, and representations regarding small business status, UEI, CAGE code, and disclosure of equipment or services from foreign entities are required. The contracting officer is Rory O’Reilly of the DLA Fluid Handling Division, and all submissions must be made through the DIBBS portal by the deadline of July 31, 2026.

FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days

View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 332911

New

DIBBS

VALVE, CHECKA check valve with a 3.0 inch copper alloy body and flanged end connections, measuring 9.50 inches face to face nominal, is being procured under contract SPE7MC-26-T-144M by the Defense Logistics Agency. The item, identified by NSN 4820-01-272-7521 and part number 15-SW-F from William E Williams Valve Corp, is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. The valve must not contain or come into direct contact with mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable devices containing mercury must be shock-proof and include a secondary containment barrier per NAVSEA 5100-003D. Two units are required with zero variance allowed, and delivery must be FOB destination within 20 days of contract award. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with marking per MIL-STD-129 and no special markings specified. Palletization and unit packaging must follow designated standards, and the shipment is destined for USNS YUKON T-AO 202 at FPO AP 96686. The original required delivery date is July 20, 2026, and the contract enforces strict compliance with government procurement protocols including transportation and handling instructions as outlined in DLAD PROC NOTES C19 and C20.

Industrial Valve Manufacturing

POSTED

DEADLINE

PARTS KIT, SOLENOIDThe contract pertains to a Parts Kit, Solenoid with NSN 4810-01-508-9312, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-144T. Two identical units are required, each priced at $1.00, with a total quantity of two units delivered FOB origin within 20 days of the order. All items must be packaged in compliance with ASTM D3951 and labeled according to MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking absolute precedence over any other standards. Palletization must adhere to DLA Packaging Requirements for Procurement, and the Unit of Issue is listed as each (EA) with zero variance permitted in quantity. Inspection and acceptance occur at the destination point. Two distinct shipping addresses are specified: one for USS SOMERSET LPD 25 in FPO AP 96678 and another for USS ARLINGTON LPD 24 in FPO AE 09564, both requiring shipment via the fastest traceable means and explicitly prohibiting parcel post. Delivery is required by July 20, 2026, and the supplier must utilize the Vendor Shipping Module for freight coordination. Government-specific identifiers, tracking codes, and administrative data are included for internal use only, and compliance with all technical, packaging, and delivery directives is mandatory.

Industrial Valve Manufacturing

POSTED

DEADLINE

WINDOW, OBSERVATIONThe contract specifies the procurement of one observation window, identified by NSN 9340-01-295-1753 and part number KS-24645, under solicitation SPE8E5-26-T-3671, issued by the Defense Logistics Agency. Delivery is required within five days of contract award to the destination FOB point, with no tolerance for quantity variance, and the item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA packaging requirements. The window must be shipped to USS PATRIOT MCM 7 at FPO AP 96675, with transportation logistics governed by DLAD procedural notes C19 and C20, and no special markings are required beyond standard military compliance. The contract explicitly prohibits the intentional introduction of mercury or mercury-containing compounds into the product or its packaging, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemically specified reagents approved by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as mandated by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. The item is classified under NAICS code 327215, and all government-specific administrative, shipment, and compliance codes are included for official use, with the required delivery date set for July 10, 2026.

Glass Product Manufacturing Made of Purchased Glass

POSTED

DEADLINE

VALVE, GLOBEThe contract specifies the procurement of five stainless steel globe valves with a 1/2 inch size, model number 57574 W03-2074B-15MS, manufactured by Velan Valve United States OPCO, Inc. The valves feature a bolted bonnet, stainless steel F347 construction, CF8M Stellite trim, and a 600 PSI swp rating, with the NSN 4820-00-590-8770. All components must strictly comply with the DLA Master List of Technical and Quality Requirements, which override any other standards including ASTM D3951. The valves are designated a critical application item and must not contain or come into direct contact with mercury or mercury-containing compounds, except for specific exempted uses such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA; portable devices containing mercury must meet additional shock-proof and secondary containment requirements per NAVSEA 5100-003D. Delivery is required FOB destination within 20 days of award, with no quantity variance permitted. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements, with palletization in compliance with specified standards and all items marked with the correct unit of issue and quantity per unit pack. The supplies must be delivered to the designated FPO address in Apalachicola, Florida, and shipping logistics are governed by DLAD Proc Note C19 and C20. The contract has a firm delivery date of April 25, 2025, with solicitation issued under SPE7MC-26-T-145A and a response deadline of August 3, 2026. The unit price is $5.00 per unit, totaling $25.00 for the full order of five valves. All vendor communications and fulfillment must reference the provided DLA vendor identification and project codes, with point of contact for inquiries listed as Marisa Thompson from the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, BALLThe contract specifies the procurement of one ball valve with NSN 4820-01-544-8819 and part number 76-508-01 from CONBRACO INDUSTRIES INC, under solicitation SPE7MC-26-T-144V. Delivery is required within 10 days of contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951 while strictly adhering to MIL-STD-129 labeling and DLA packaging requirements, with all technical and quality standards from the DLA Master List taking precedence. The item is to be palletized in accordance with RP001 and shipped via the fastest traceable method excluding parcel post to the designated military address at Fort Riley, Kansas. The required delivery date is July 20, 2026, and the contract includes specific government-use identifiers, a point of contact for inquiries, and links to official DLA systems for compliance and unit of issue verification.

Industrial Valve Manufacturing

POSTED

DEADLINE

ATTACHMENT, COLLET HThe contract specifies the procurement of three units of Attachment Collet H under NSN 3460-00-042-4414, with a required delivery of 20 days from the award date and delivery terms set at FOB origin. Strict limitations are placed on the use of mercury or mercury-containing compounds, prohibiting any intentional addition or direct contact with the supplied hardware unless explicitly permitted for functional components such as batteries, fluorescent lights, sensors, control systems, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with palletization governed by DLA’s RP001 packaging standards, and all DLA Master List of Technical and Quality Requirements supersede any conflicting ASTM provisions. Shipments must be sent via traceable freight to the designated Naval Undersea Warfare Center in Keyport, Washington, with parcel post strictly prohibited. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract references specific technical and quality requirements identified by R or I numbers from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit price is $3.00 per item, totaling $9.00, and the contract number is SPE8E5-26-T-3666, with a required delivery date of July 20, 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEFA safety relief valve rated at 0.375 inch and 5,000 PSI, subplate mounted for use with hydraulic fluid, is required under this contract, supplied by Parker-Hannifin Corporation with part number R4V03-535-10A1. The product must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition scale. Mercury and mercury-containing compounds are strictly prohibited except in specified exceptions such as batteries, fluorescent lights, instrument sensors, weapon systems, or Navy-approved chemical reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The item is identified by NSN 4820-01-572-9614, with a single unit required and delivery due within 20 days FOB origin. Inspection and acceptance occur at destination, with no variance allowed in quantity. Packaging must follow MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking codes applied. Palletization adheres to DLA packaging requirements, and shipping must occur via the fastest traceable means—parcel post is prohibited. The delivery destination is the USS Dwight D. Eisenhower CVN 69, FPO AE 09532, with transportation governed by DLAD Procurement Notes C19 and C20. The required delivery date is July 20, 2026, and the solicitation closed on August 3, 2026, under contract number SPE7MC-26-T-144R, administered by the Defense Logistics Agency.

Industrial Valve Manufacturing

POSTED

DEADLINE

VALVE, REGULATING, FLThe contract specifies the procurement of one regulating fluid pressure valve with NSN 4820-01-507-0745 and part number 30804995 from Warren Controls, Inc., under solicitation SPE7MC-26-T-144U. Delivery is required within 20 days, FOB origin, with no tolerance for quantity variance. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including marking and labeling per MIL-STD-129 and palletization according to RP001. Mercury or mercury-containing compounds are explicitly prohibited from intentional addition or direct contact with the hardware, except for limited functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents; portable items containing mercury must include shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The valve must be shipped via the fastest traceable means, with parcel post strictly prohibited, to two distinct military vessel addresses: USS SOMERSET LPD 25 and USS ARLINGTON LPD 24, both under RDD 777 and project ZH9 TP 2. The contract mandates adherence to DLA packaging and procurement standards, and vendors must utilize the VSM system for freight shipping. The original required delivery date is July 20, 2026, with a solicitation response deadline of August 3, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

MARKER, IDENTIFICATIThis contract, issued under solicitation number SPE8E6-26-T-3817 by the Defense Logistics Agency, mandates the delivery of one unit of a Type I identification marker with a non-extendable shelf life of 12 months, identified by NSN 7690016685478 and part number 804-5959312 Rev C. The item must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 specifications, including special marking code 32 for shelf-life compliance. Palletization follows DLA packaging standards, shipment must bypass parcel post, and delivery is FOB destination in exactly 20 days with zero variance allowed. Two separate delivery points are specified: one for USS ESSEX LHD 2 at FPO AP 96643 and another for USS DWIGHT D EISENHOWER CVN 69 at FPO AE 09532, each requiring traceable transportation and specific military freight handling procedures. The contract enforces strict adherence to DLA procedural notes for vessel shipments and requires the vendor to use the Vendor Shipping Module for logistics coordination. The original required delivery date is July 20, 2026, and the item is subject to inspection and acceptance at the destination.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

CONTAINER, DEPLOYABLE BThe contract solicitation is for a Deployable Container, designated as CONTAINER, DEPLOYABLE B with NSN 8145-01-591-7441, under purchase request 7015793832 for a quantity of one unit. The solicitation number is SPE8ED-26-Q-0607, issued by the Defense Logistics Agency under the Department of Defense, and was posted on July 22, 2026, with a response deadline of July 26, 2026. This is a federal procurement opportunity with no specified set-aside classification or NAICS code, indicating it is open to general competition. The place of performance and organization address details are unspecified, but the procurement is U.S.-based. Interested parties must submit responses prior to the deadline through the official DIBBS portal linked in the solicitation.

POSTED

DEADLINE

LABELThe contract specifies the procurement of a blood group labeling product identified as "BLOOD GROUP B, RH POSITIVE" with precise dimensional and formatting requirements, including a black-on-white codabar and expiration date label measuring 1-7/8 by 1-7/8 inches nominal, compliant with the latest FDA Guidelines for the Uniform Labeling of Blood and Blood Components. The unit of issue is a roll of 250 labels, and bidders must clearly indicate the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with control determined by the solicitation or award date depending on acquisition size, and the labeling must adhere fully to those referenced standards. The contract also notes that covered defense information may apply, and the delivery must be completed within 20 days after order. The solicitation, identified as SPE8E6-26-T-3824, is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 323117 and a NSN of 7690-01-393-5085. The purchase request number is 7017574314, and only one roll is required. The place of performance is FPO with a zip code of 96632, and responses are due by August 3, 2026, with the solicitation posted on July 22, 2026. Primary point of contact is Tai Nguyen, reachable via email and phone, and additional details are accessible through the official DIBBS portal. All submissions must comply with DLA packaging and labeling mandates, including the removal of government identification from non-accepted supplies, and proper documentation of compliance must accompany bids.

POSTED

DEADLINE

STEM, FLUID VALVEThis contract is for the procurement of a single STEM, FLUID VALVE with NSN 4810-01-516-3861 and part numbers 13182-4 and 56-12767-C27, supplied to meet strict military specifications under solicitation SPE7MC-26-T-144K. The item is classified as a critical application component and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions apply: no ozone-depleting chemicals may be used in any part of the product, and mercury or mercury-containing compounds are forbidden unless specifically exempted for functional uses in batteries, instruments, or weapon systems approved by NAVSEA. Any mercury-containing portable lamps or instruments must be shock-proof and include secondary containment as per NAVSEA 5100-003D. All packaging must conform to MIL-STD-2073-1E with specific methods for preservation, wrapping, and unit containment, and labeling must follow MIL-STD-129 without special marking codes. The item must be delivered FOB destination within 20 days of contract award, with no variance in quantity allowed, and inspected and accepted at the destination. Delivery is to USS CHUNG HOON DDG 93 at FPO AP 96662, with transportation handled under DLA procedures C19 and C20. The contract requires full compliance with DoD unit of issue standards and includes a required delivery date of July 20, 2026, with solicitation response due by August 3, 2026, issued by the Defense Logistics Agency under NAICS code 332912.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 12 days

View Details