Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

TUBE ASSEMBLY, METAL

Active
SPE7M4-26-T-270TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of seven metal tube assemblies under solicitation SPE7M4-26-T-270T, with a delivery requirement of 474 days after award. The item is identified by NSN 4710-01-572-8920 and falls under NAICS code 331420. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and requires compliance with tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Configuration changes must be managed through formal engineering change proposals or requests for variance, and any non-accepted supplies must have government identification removed. The supplied technical data is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors who hold an approved US/Canada Joint Certification Program certification, have completed required DOD export control training, and have been approved by DLA. Cybersecurity compliance at CMMC Level 2 is mandatory for the offeror as a certified third-party assessment organization, and covered defense information applies to this procurement. Item Unique Identification is not required per the Service customer’s request, and packaging must conform to DLA specifications. The solicitation was issued on July 20, 2026, with responses due by July 31, 2026, and performance is to be delivered to Tracy, California, 95304-5000.

General Info

Procure seven metal tube assemblies, deliver in 474 days, comply with DLA quality, ITAR/EAR, CMMC Level 2, and US/Canada certification.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

331420 - Copper Rolling, Drawing, Extruding, and AlloyingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-270T for Fluid Handling Division

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Lorenzo Rankins
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TUBE ASSEMBLY,METAL
TUBE ASSEMBLY, METAL
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE7M4-26-T-270T
SECTION B
export-controlled data. NSN/Part Number: 4710-01-572-8920 Quantity: 7 EA Purchase Request: 7008488461QTY: 7 Delivery: 474 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331420
New
DIBBS
Bent Metallic Tube Manufacturing and SupplyThe contract is for the manufacture and delivery of precision bent metallic tubes identified by NSN 4710015955482, manufactured to meet strict technical specifications established by the Defense Logistics Agency. The supplier must ensure full compliance with all DLA requirements regarding material composition, dimensional accuracy, surface finish, and performance standards, with no deviations permitted. Each component must be appropriately packaged and labeled in accordance with federal and military standards to ensure traceability, handling safety, and readiness for immediate deployment. The finished product must be shipped to the designated delivery point at DLA New Cumberland, Pennsylvania, with all documentation verifying adherence to quality assurance protocols, including certifications of conformance and inspection records. This is a subcontract solicitation under NAICS code 331420, indicating the work falls within the forging and stamping industry sector, and was posted on July 20, 2026, with a firm response deadline of July 31, 2026. The contracting office is the Fluid Handling Division within the Department of Defense, and the place of performance is explicitly set as New Cumberland, with a ZIP code of 17070-5002. All deliveries must be coordinated to meet the specified timeline and location, and failure to meet contractual obligations regarding specification, packaging, labeling, or delivery may result in non-compliance penalties or contract termination. Participation requires proven capability in high-precision metal forming and experience with government defense logistics systems.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
Seamless Copper Refrigeration Tubing ManufacturingThe contract requires the manufacture of 10-foot seamless copper refrigeration tubing adhering to strict military specifications, encompassing the entire production process from extrusion through final dimensional verification and packaging preparation. The tubing must meet exacting quality and performance standards to ensure reliability in defense-related refrigeration systems, with all steps rigorously controlled to maintain consistency and compliance. The work involves precision engineering and material handling to deliver tubing that satisfies technical requirements for use in critical military applications. The contract is classified as a subcontract under NAICS code 331420 and is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS, with performance required at Fort Bragg, North Carolina, zip code 28310. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, indicating a tight turn-around for qualified vendors to submit proposals. Interested parties must be prepared to demonstrate capability in producing seamless copper tubing to military standards, including the ability to perform all necessary inspections and packaging procedures in compliance with defense procurement protocols.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLY SET, MThis contract is for a single unit of a Tube Assembly Set, M, with NSN 4710-01-589-2585 and part number L4812305-011, procured under solicitation SPE4A0-26-T-3954 by the Department of Defense for delivery to Tinker Air Force Base. The item is designated as a critical application and must comply with stringent technical, quality, and packaging standards referenced from the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 for manufacturers and non-manufacturers. Compliance with MIL-STD-2073-1E packaging, MIL-STD-129 marking, and DLA-specific packaging requirements is mandatory, with no special marking required. The item must be delivered within five days under FOB Origin terms, with zero tolerance for quantity variance, and inspected and accepted at the destination. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and covered defense information protocols apply. The item is not subject to Item Unique Identification, per DFARS 252.211-7003(c)(1)(i). Delivery must be shipped by traceable freight methods, excluding parcel post, and must include the assigned RDD and project details. The contract mandates the use of authorized DoD units of issue and provides detailed shipping and receiving addresses for Tinker AFB, with a primary point of contact at DLA. The required delivery date is July 13, 2026, and the solicitation response deadline is July 28, 2026. All suppliers must meet the specified quality assurance provisions, test equipment standards, and documentation requirements for source approval, and all documentation must reflect the correct revision of DLA standards in effect on the applicable date. The contract includes no set-aside designation and is issued under NAICS code 331420 for manufacturing of other fabricated metal products.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331420
New
DIBBS
TUBE, METALLICThe contract specifies the procurement of one 10-foot length of seamless copper refrigeration tube with a diameter of 0.875 inches and a wall thickness of 0.045 inches, identified by NSN 4710015908456 and part number 2LKJ6 from W.W. Grainger, Inc. The item must meet technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and it is subject to strict prohibitions against the use of Class I ozone-depleting chemicals, which supersede any conflicting specification requirements. A shelf life of 12 months applies and is non-extendable, and the product must comply with DLA packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, including specific packaging and containment codes. Delivery is required within five days of contract award, FOB origin, to the designated military facility at Fort Bragg, North Carolina, with shipping permitted only via traceable freight methods—parcel post is explicitly prohibited. The delivery is non-negotiable with zero variance permitted in quantity, and inspection and acceptance occur at the destination. The contract references a required delivery date of July 17, 2026, and is issued under solicitation SPE7M0-26-T-013E with a response deadline of July 31, 2026, under a federal acquisition framework managed by the Department of Defense’s Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331420
New
DIBBS
TUBE, BENT, METALLICThis contract specifies the procurement of a metallic bent tube identified by NSN 4710-01-595-5482 and part number 129044-59010, supplied by YANMAR AMERICA CORPORATION. A total of 62 units are required, with each unit priced at $62.00, resulting in a total contract value of $3,844. Delivery is due within 167 days from the contract award, with a firm delivery date of January 15, 2027, and the item must be shipped FOB origin. The product is subject to strict compliance with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, with no special marking required. The item has a non-extendable shelf life of 72 months, classified as TYPE I, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements. All substitute chemicals must be submitted for approval unless explicitly authorized. Inspection and acceptance occur at the destination, and the item must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical and quality requirements referenced in the DLA Master List, and the governing revision is determined by the solicitation issue date. The unit of issue is each (EA), and transportation is governed by DLA procedural notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 13 hours ago

DEADLINE

in 11 days
View Details
NAICS: 331420
New
DIBBS
TUBE ASSEMBLYThis contract is for the procurement of a critical application tube assembly identified by Northrop Grumman Systems Corporation part number 123H10014-9097D-4 and NSN 4710-LN-003-3411, with a total quantity of six units required. The item must be delivered in full compliance with strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization governed by RP001 DLA packaging requirements. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and the product is subject to inspection and acceptance at the destination point. Delivery is due within 84 days of contract award, with FOB destination terms applying and no variance permitted in quantity. The item is intended for delivery to Naval Air Station North Island in San Diego, California, and must be shipped to the designated DLA receiving facility at Naval Base Coronado. The solicitation number is SPEFA1-26-T-0260, issued by DLA Fleet Readiness Southwest under the Department of Defense, with a posted date of July 19, 2026, and a response deadline of July 27, 2026. The primary point of contact is Donnell Hall, reachable via phone and email. The purchase request number is 7017430946, and the unit price is $0, which implies a cost-free acquisition or that pricing is managed under a separate agreement. The item falls under NAICS code 331420 and is classified as a critical application item with multiple referenced technical and quality requirements including RA001, RP001, RQ017, ZD080, RS002, and RQ001. The original required delivery date is set for September 8, 2026, and the parcel post address and freight shipping address must be strictly followed to ensure proper logistics processing.
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 331420
New
DIBBS
CABLE, SPECIAL PURPOSE,The contract specifies the procurement of special-purpose electrical cable, identified by NSN 6145015619059, with a unit of issue defined as a spool containing 1,000 feet of continuous cable. A total quantity of 767 spools is required, divided into two line items: 37 spools to be delivered to Tracy, California, and 730 spools to be delivered to New Cumberland, Pennsylvania. Delivery is mandated within 133 days from the contract award, with FOB origin terms and no variance allowed in quantity. All items must comply with MIL-STD-2073-1E for packaging and MIL-DTL-12000 for preservation, with marking requirements strictly aligned to MIL-STD-129 and DLA packaging guidelines. The cable is classified as a commercial item, and suppliers must adhere to Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website. The contract references specific part numbers from approved vendors including Condumex, Copperfield LLC, General Cable Technologies, and others. Final delivery must meet exact packaging, marking, and palletization standards, with no tolerance for deviations. The solicitation number is SPE7M1-26-T-219A, with a response deadline of July 30, 2026, and the point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
BRAID, WIREThe contract solicits a 3-foot length of braid wire under NSN 6145-01-393-7811, sourced as one continuous 100-foot spool, with delivery required within 20 days after order. It is issued under solicitation SPE7M1-26-T-218A, with a response deadline of July 30, 2026, and posted on July 19, 2026, by the Department of Defense’s Maritime Supply Chain. Technical and quality requirements are controlled by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Configuration change management, variance requests, and removal of government identification from non-accepted items are governed by specified DLA protocols. The place of performance is APO with ZIP 09494-4640, and the primary point of contact is Alisha Blanton, reachable via email and phone listed. No additional data is available for use in procurement execution.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
TUBE, BENT, METALLICThe contract is for one metallic bent tube with NSN 4710-01-616-8636 and part number 4937154, supplied under solicitation SPE7L0-26-T-0372 for the Department of Defense. Delivery is required within five days of contract award, fob origin, with no tolerance for quantity variance. The item must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which override any conflicting specifications. Ozone-depleting chemicals are strictly prohibited, and any substitute materials require prior approval unless explicitly authorized. Packaging must meet ASTM D3951 standards, but only to the extent allowed by DLA’s superior requirements, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow RP001 DLA Packaging Requirements. The sole delivery point is Letterkenny Army Depot in Chambersburg, PA, and shipment must occur via the fastest traceable method excluding parcel post. All items must be marked with the government designation W25G1Q and the manufacturer's control number TCN W25G1Q619400XB. The original required delivery date is July 16, 2026, and the item is classified under NAICS code 331420 for metal forging and stamping.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
DIBBS
WIRE, ELECTRICALThis contract, issued under solicitation SPE4A5-26-T-294C by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, specifies the procurement of 175 feet of electrical wire with NSN 6145014693665 and part number 30-275-22A20GA from Bell Textron Inc. Delivery is required FOB origin within 985 days, with a quantity variance allowance of plus or minus 5 percent. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with special requirements denoted as ZZ-ZZ. Palletization and packaging details include a unit pack code of U, with no specified intermediate containers or cushioning materials. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling procedures to follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, with zero non-conformances required unless otherwise stated. Item Unique Identification is not mandated per Service customer request, and DFARS 252.211-7003(c)(1)(i) applies. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The wire is procured in feet as the authorized unit of issue, and pricing is set at a total of $175 with a unit price of $1.00 per foot.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 331420
New
Federal
61--CABLE,SPECIAL PURPOSE,The contract seeks the procurement of 767 units of a special-purpose cable identified by NSN 6145015619059, with quantities divided into two line items: 37 units and 730 units, both to be delivered to W1A8 DLA DISTRIBUTION within 133 days of award. Only approved sources listed by their unique identifiers are eligible to quote, including specific part numbers from manufacturers such as 3V9L1, 5T6D3, 62RP5, 68167, and 6V273. The solicitation is issued as an RFQ under the WOSB set-aside program for Women-Owned Small Businesses and does not include any supporting specifications, plans, or drawings. All responses must be submitted electronically via the SAM.gov portal before the deadline of July 30, 2026, with no hard copies available. The procuring activity is the DLA Land and Maritime office in Columbus, Ohio, and all inquiries must be directed via email to the designated point of contact referenced in the solicitation document, which can be accessed through the provided UI link or the DIBBS website.
DLA Land And Maritime

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331420
New
Federal
PIPE,METALLICThis contract, issued under solicitation number N0010426QFF36 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, mandates the supply of metallic pipe meeting stringent military specifications for critical shipboard applications. The material, designated as SPECIAL EMPHASIS Level I, must comply with MIL-P-24691/3 for corrosion-resistant stainless steel seamless pipe of 1-inch nominal size and Schedule 80, with strict requirements for ultrasonic and shear wave testing, chemical and mechanical certification per DI-MISC-81020, and full traceability from heat lot to final product. All items must be seamless, free from mercury contamination, and marked permanently and temporarily per MIL-STD-792 and SAE AMS standards, with traceability numbers directly linked to certified test data. Material must originate from single heats if fewer than five pieces are supplied, and any deviation from specifications requires formal approval via the ECDS system. The contract enforces rigorous quality assurance protocols, including mandatory ISO-9001 and ISO-17025-compliant quality systems, with documented procedures subject to government audit. All certification documentation, including test reports and certificates of compliance, must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with delivery scheduled for 365 days post-certification acceptance. Government inspection occurs at destination, and acceptance is contingent upon 100% verification of traceability markings, certification completeness, and zero-defect sampling per ANSI/ASQ Z1.4 for lot acceptance. The award process is CLIN-specific, allowing for multiple vendors, and prohibits quantity discounts across combined CLINs. The contract includes full Buy American, Small Business Set-Aside, and Warranty provisions, with a 365-day warranty period following acceptance. Contractors must submit engineering change proposals for any configuration changes and adhere to strict documentation, data submission, and security protocols as directed by NAVSEA and Navy directives, with all submissions routed through ECDS and WAWF systems.
Navsup Weapon Systems Support Mech

POSTED

4 days ago

DEADLINE

in 28 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 483111
New
DIBBS
Ocean Transportation of SuppliesThe contract entails the arrangement of ocean freight services using U.S.-flag vessels to transport supplies for the Department of Defense in full compliance with the Buy American Act and MARAD regulatory requirements. All transportation must be executed through vessels that are U.S.-owned, U.S.-crewed, and U.S.-built, ensuring adherence to federal mandates designed to support domestic maritime capabilities and national security interests. The procurement is specifically designated as a subcontract under NAICS code 483111, which classifies it as ocean transportation of freight, and it is directed by the Fluid Handling Division of the DoD. Performance is required to be completed in support of operations at Hill Air Force Base, Utah, with an address of 84056-5734 serving as the designated place of performance. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a tight timeline for interested parties to submit proposals. Participation is limited to entities capable of meeting stringent regulatory and operational standards, including documentation of vessel ownership, crew nationality, and compliance with all applicable defense logistics protocols. While no set-aside designation is specified, the nature of the work inherently favors contractors with established experience in military logistics and maritime shipping under federal oversight. Contractors must be prepared to provide evidence of compliance with U.S. maritime laws and demonstrate capacity to move defense-related cargo efficiently and securely through international waterways under the authority of the Department of Defense.
Deep Sea Freight Transportation

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Identification and LabelingThe contract pertains to the identification, classification, and labeling of hazardous materials linked to a component or its packaging, requiring full compliance with OSHA regulations and the preparation of Material Safety Data Sheets. The work demands accurate determination of chemical hazards, proper labeling in accordance with federal standards, and thorough documentation to ensure safe handling, storage, and transportation of hazardous substances. All activities must align with current regulatory frameworks to mitigate risks and maintain workplace safety. This is a subcontract under the NAICS code 541690, issued by the Fluid Handling Division of the Department of Defense, with performance required at Hill Air Force Base, Utah, zip code 84056-5734. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. Interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.
Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Military-Standard Marking and Bar-CodingThis contract requires the application of permanent labels and data matrix barcodes to packaging and units in strict accordance with MIL-STD-129 standards to ensure full compliance with Department of Defense logistics traceability requirements. The work involves precise labeling procedures that enable accurate identification, tracking, and inventory management of military supplies throughout the supply chain, from procurement to field deployment. All markings must meet DoD-specified durability, readability, and placement criteria to support automated scanning and data integration across defense logistics systems. The contract is designated as a subcontract under NAICS code 541380 and is issued by the Fluid Handling Division of the Department of Defense. Performance is required at Hill Air Force Base, Utah, with a zip code of 84056-5734. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026. While the specific contracting office and point of contact are not provided, the requirement is critical for maintaining end-to-end visibility of military assets and must be executed with rigorous attention to technical specifications and compliance timelines.
Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires specialized packaging, preservation, and palletization of aerospace components in full compliance with military standards to ensure long-term storage and secure transport. This includes the mandatory use of desiccants, vapor corrosion inhibitors, and sealed containment methods to protect sensitive hardware from environmental damage, moisture, and corrosion during extended periods. Work must adhere to stringent military specifications governing material selection, application techniques, and documentation to maintain operational readiness upon deployment. Performance is centered at Hill Air Force Base with a zip code designation of 84056-5734, indicating a critical defense logistics location. The solicitation is classified as a subcontract under NAICS code 561910, reflecting its alignment with support activities for military operations. The contracting entity is the Fluid Handling Division within the Department of Defense, signaling a high-priority procurement tied to defense infrastructure and readiness. Interested parties must submit responses by the deadline of July 31, 2026, with the opportunity announced on July 20, 2026. While no set-aside details are provided, the nature of the work and its placement within a defense agency suggest a focus on qualified, certified subcontractors with proven expertise in military-grade packaging and preservation of aerospace assets.
Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Precision Aerospace Component ManufacturingThe contract pertains to the precision manufacturing of a high-integrity aerospace actuator clamp and band assembly specifically designed for use on the main landing gear of military aircraft. It demands stringent adherence to military quality standards, with all components requiring exacting machining tolerances and full material traceability from raw stock through final assembly. The work must be performed to ensure structural reliability and operational safety under extreme conditions, consistent with the rigorous demands of defense aerospace applications. All production processes, inspections, and documentation must align with defense-grade quality control protocols to meet certification and audit requirements. Performance of this subcontract is set for Hill Air Force Base, Utah, with an official response deadline of July 31, 2026, and a posted date of July 20, 2026. The North American Industry Classification System code 332999 indicates the work falls under other fabricated metal product manufacturing, underscoring the specialized nature of the components involved. The contracting entity is the Fluid Handling Division under the Department of Defense, which requires vendors to demonstrate proven capability in high-reliability aerospace subsystems. No set-aside provisions are specified, meaning all eligible contractors may respond, but compliance with defense logistics standards and end-use specifications is mandatory for award consideration.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation and maintenance of cybersecurity controls to safeguard Controlled Unclassified Information (CUI) in compliance with NIST SP 800-171 and DFARS regulations. This subcontract focuses on ensuring that all covered defense information is protected through established security measures that meet federal standards for data integrity, confidentiality, and availability. The performance location is identified as Summerville with a zip code of 29485-9800, and the work is being procured by the Fluid Handling Division under the Department of Defense. The North American Industry Classification System code 541512 indicates the scope relates to computer systems design services, aligning with the technical nature of the cybersecurity requirements. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, allowing potential offerors a limited timeframe to prepare and submit proposals. The contract is structured as a subcontract, meaning the successful bidder will be working under a prime contractor or an existing agreement within the defense supply chain. There is no set-aside designation provided, suggesting the opportunity is open to all qualified entities regardless of size or status. The required cybersecurity controls must be fully operational and continuously monitored to meet compliance obligations throughout the contract period, emphasizing ongoing vigilance and documentation to demonstrate adherence to federal cybersecurity protocols.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & LabelingThe contract titled Hazardous Materials Compliance & Labeling requires full adherence to the OSHA Hazard Communication Standard, mandating the development and implementation of accurate hazard warning labels and complete Material Safety Data Sheets for all hazardous materials to be delivered. This subcontract, issued under NAICS code 541690 by the Fluid Handling Division of the Department of Defense, is focused on ensuring safety and regulatory compliance in the handling and transport of chemical substances, with performance required at the location in Summerville, South Carolina, zip code 29485-9800. Interested parties must submit responses by the deadline of July 31, 2026, with the solicitation posted on July 20, 2026, and details accessible through the designated DIBBS platform link.
Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThe contract requires performance of first article testing on hose assemblies in accordance with Department of Defense standards, ensuring compliance with stringent technical and quality requirements. This includes conducting all necessary tests, preparing complete documentation, and submitting test results for formal government review and approval prior to production authorization. The work is classified as a subcontract under NAICS code 541380 and is managed by the Fluid Handling Division of the Department of Defense, with performance expected to occur at Summerwell, South Carolina, ZIP 29485-9800. The solicitation was posted on July 20, 2026, and responses must be submitted by July 31, 2026, with no set-aside provisions indicated. All deliverables must meet exacting military specifications to gain official acceptance.
Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
Nonmetallic Hose Assembly SupplyThe contract is for the supply of a single nonmetallic hose assembly with a 0.500-inch internal diameter, manufactured to meet military standards for performance, packaging, marking, labeling, and quality assurance. The requirement falls under NAICS code 332999 and is issued as a subcontract by the Fluid Handling Division of the Department of Defense. All deliverables must comply with specified military specifications to ensure operational readiness and consistency with defense system requirements. The place of performance is designated as Summerville, South Carolina, with a ZIP code of 29485-9800, indicating where the product must be delivered or where services are to be rendered. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, providing a narrow ten-day window for submissions. The contract is accessible through the DIBBS platform for further details and submission guidelines.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data SupportThe contract titled Hazardous Materials Compliance & Safety Data Support requires the provision of comprehensive Safety Data Sheets and full adherence to hazardous material identification and environmental safety standards. This subcontract, issued by the Fluid Handling Division of the Department of Defense, is centered around ensuring regulatory compliance and safe handling practices for hazardous substances used in operations at the Barstow location with ZIP code 92311-5014. The work must align with stringent environmental and safety protocols to mitigate risks associated with material handling, storage, and disposal, with the contractor responsible for accurate documentation and proactive compliance measures. Responses to this solicitation are due by July 31, 2026, with the opportunity posted on July 20, 2026. The NAICS code 541690 indicates this is a professional, scientific, and technical service contract, specifically falling under other scientific and technical consulting services. The place of performance is fixed in Barstow, and while no point of contact or set-aside details are provided, the contract is structured as a subcontract under the Department of Defense’s procurement framework, with all obligations tied to maintaining safety compliance and delivering up-to-date, accurate hazardous material documentation to support operational integrity.
Other Scientific and Technical Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Labeling Compliance ServicesThe contract requires compliance with Department of Defense standards for military-grade packaging, preservation, and labeling of hose assemblies to be delivered under the FLUID HANDLING DIVISION. All work must meet DLA specifications to ensure product integrity during storage and transport, with performance centered at Barstow, California, zip code 92311-5014. The solicitation is classified as a subcontract under NAICS code 561910 and is open for responses until July 31, 2026, with the opportunity posted on July 20, 2026. Bidders must ensure full adherence to military packaging protocols, including proper materials, documentation, and labeling requirements to support secure logistics and operational readiness. Compliance is mandatory and non-negotiable, with no set-aside provisions indicated.
Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
Commercial Hose Supply (NSN 4720200041976)The contract involves the supply of 24 units of 90-millimeter hose meeting military specifications, with all packaging and labeling requirements aligned to defense standards. The item is identified by NSN 4720200041976 and is solicited as a subcontract under NAICS code 326220, targeting manufacturers capable of fulfilling precise military-grade performance and documentation criteria. The offering is managed by the Fluid Handling Division within the Department of Defense, with performance required at Barstow, California, ZIP code 92311-5014. The solicitation was posted on July 20, 2026, and responses must be submitted no later than July 31, 2026, providing vendors a limited window to submit proposals that meet strict technical, logistical, and compliance benchmarks.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details