Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Refrigeration System Leak Detection and Repair Services

Active

Federal

Response Deadline07/27/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Refrigeration System Leak Detection and Repair Services is a subcontract set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under FAR 19.14, targeting NAICS code 811310 for appliance repair and maintenance. Contractors are required to perform comprehensive diagnostic testing to locate refrigerant leaks in HVAC and refrigeration systems, repair or replace malfunctioning components, properly evacuate the system of air and moisture, and recharge it with the correct type and quantity of refrigerant. All work must include final performance verification to ensure the system operates efficiently and meets specified standards after repair. This opportunity was posted on July 24, 2026, with a firm response deadline of July 27, 2026, and is managed by the 246-NETWORK Contracting Office 6 within the Department of Veterans Affairs. While specific performance locations and point of contact details are not provided, the contract enforces strict compliance with industry best practices for refrigerant handling and system integrity. Only qualified SDVOSB entities are eligible to respond, emphasizing the federal commitment to supporting veteran-owned small businesses through targeted contracting opportunities.

General Info

SDVOSB-only contract for refrigerant leak detection, repair, and system recharging under VA contracting office.

Agency

Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)View Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

VA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 04:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform diagnostic testing to identify refrigerant leaks in HVAC or refrigeration systems, repair faulty components, evacuate and recharge with refrigerant, and verify system performance.

Similar Contracts

Same NAICS industry code

Lufkin Generator ServicesThe Texas Department of Public Safety is soliciting bids for generator services at 2809 S. John Reddit Dr. in Lufkin, Texas, under solicitation number 26R0024565. This opportunity is open to qualified vendors capable of providing comprehensive generator maintenance, repair, and related services at the specified location. The solicitation was posted on July 25, 2026, and responses are due by 11:00 p.m. CT on August 14, 2026. There is no specific set-aside classification indicated, and the NAICS code has not been provided. The contract falls under the state, local, and education (SLED) category, managed by the Texas DPS office. Ruben Reyes is the primary point of contact for inquiries, reachable at 512-424-5137 or ruben.reyes@dps.texas.gov. All necessary details and submission guidelines can be accessed through the official Texas SmartBuy portal link provided.

Department of Public Safety

POSTED

about 20 hours ago

DEADLINE

Maintenance and Repairs for Commercial Laundry Equipment at the Mexia State Supported Living Center.The Texas Health and Human Services Commission is soliciting competitive bids to secure services for the maintenance and repair of commercial laundry equipment at the Mexia State Supported Living Center located at 540 Chapel Drive in Mexia, Texas. The solicitation, numbered HHS0017693, was posted on July 24, 2026, with a response deadline of August 14, 2026, at 4:30 PM Central Time. This procurement is managed by the Procurement and Contracting Services division of the agency and is intended to establish one or more contracts to ensure the ongoing operational reliability of laundry systems critical to the center’s daily functions. The work involves comprehensive servicing, troubleshooting, and repair of industrial-grade laundry machines and related infrastructure to maintain health, hygiene, and compliance standards within the facility. The contract will be awarded to qualified vendors able to demonstrate experience in commercial laundry equipment maintenance, response capabilities, and adherence to state facility requirements. Proposals must be submitted through the Texas SmartBuy portal, and all inquiries should be directed to David Martinez, the primary point of contact, via email at david.martinez01@hhs.texas.gov or phone at 512-406-2597. The opportunity is open to eligible businesses under the state and local government (SLED) category, with no set-aside designation specified, and the place of performance is exclusively located in Mexia, Texas. Bidders are expected to provide detailed service plans, pricing structures, and proof of technical competency to meet the operational demands of a state-supported living center.

Health and Human Services Commission

POSTED

DEADLINE

Small, Local, and DBE/MBE/WBE Supplier ParticipationHenry County Board of Commissioners is inviting certified small, disadvantaged, minority-, women-, and veteran-owned businesses to serve as subcontractors or suppliers in support of generator maintenance services under a subcontract opportunity. The solicitation is open to businesses certified under relevant disadvantaged business enterprise programs and aims to foster local economic participation through targeted subcontracting roles. The NAICS code 811310 specifies the scope of work centered on industrial and commercial equipment repair and maintenance, with performance expected to occur within Georgia. The posting date is July 24, 2026, and responses must be submitted by August 25, 2026, at 8:00 PM Eastern Time. While no specific set-aside designation is listed, the opportunity explicitly encourages participation from underrepresented business owners. Interested parties should access the full solicitation details via the provided state portal link before the deadline.

Henry County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Generator Inspection and Maintenance ServicesHenry County Board of Commissioners is seeking a subcontractor to conduct biannual inspections and preventive maintenance on 31 generator units located across various county facilities. The generators include both diesel and natural gas-powered models, each with specific technical ratings that must be adhered to during servicing. The work requires qualified personnel capable of performing comprehensive maintenance procedures to ensure operational reliability and safety standards are consistently met. All tasks must be completed on a scheduled biannual basis across all designated sites. This procurement is classified under NAICS code 811310 for Miscellaneous Repair and Maintenance. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 8:00 PM. The contract is structured as a subcontract and no set-asides have been designated. Performance of the services will occur at facilities within Henry County, Georgia, though exact locations are not specified. The full solicitation can be accessed via the provided state procurement portal link.

Henry County Board of Commissioners

POSTED

DEADLINE

in about 1 month

RFP #27-03, Generator Services and Maintenance - Annual ContractHenry County is seeking qualified vendors to provide annual generator services and maintenance for generators located across various county buildings under a renewable one-year contract. The selected contractor must supply all necessary labor, materials, equipment, and services to ensure proper operation, scheduled maintenance, and timely repairs of the generators. Proposals must be submitted by 3:00 PM local time on August 25, 2026, and can be delivered in person, via mail or common carrier to the Purchasing Department at 140 Henry Parkway, McDonough, GA 30253, or electronically through the County’s eProcurement Portal. Emailed or faxed submissions will not be accepted. Once submitted, proposals cannot be withdrawn for sixty days except as permitted by law, and the County retains the right to reject any or all proposals without explanation or to waive minor technical discrepancies. The solicitation is managed by the Henry County Board of Commissioners, with primary contact information provided through Christina Dismuke at purchasing@henrycountyga.gov or 770-288-6027.

Henry County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Repair & Parts for sheet ironer at Richmond SSLCThe contract solicitation titled Repair & Parts for sheet ironer at Richmond SSLC is issued by the Texas Health and Human Services Commission under solicitation number HHS0017554v3, posted on July 24, 2026, with a response deadline of August 7, 2026, at 4:30 PM CT. This solicitation is categorized as a SLED procurement, indicating it is directed toward state, local, or educational entities, and the work is to be performed in Texas, specifically at the Richmond SSLC facility. The scope involves the repair and provision of necessary parts for a sheet ironer, though specific technical requirements or part specifications are not detailed in the provided metadata. The primary point of contact for inquiries is Kimberly Andrews, reachable at 972-337-6254 or Kimberley.Andrews@hhs.texas.gov, and all submissions must be made through the Texas SmartBuy portal via the provided UI link. No set-aside status or NAICS code is listed, suggesting the opportunity is open to all qualified offerors without specific small business or socioeconomic preferences. Bidders are expected to respond by the stated deadline with proposals addressing the repair needs, parts supply, and associated service terms for the equipment at the designated location.

Health and Human Services Commission

POSTED

DEADLINE

Preventive Maintenance and Field Service SupportThe contract titled Preventive Maintenance and Field Service Support entails ongoing services for the upkeep, performance testing, and field repairs of vending machines, with requirements including quarterly inspections, software updates, and comprehensive service documentation to ensure operational reliability. These tasks are critical to maintaining system functionality and compliance across installed units, with all work performed under a subcontract structure tied to a Total Small Business Set-Aside classification under FAR 19.5, reserving eligibility exclusively for small businesses. The North American Industry Classification System code 811310 confirms the focus on miscellaneous repair and maintenance services, aligning the scope with institutional support roles rather than manufacturing or sales. The solicitation, posted on July 24, 2026, with a response deadline of August 17, 2026, is managed by the Nashville Area Indian Health Service under the U.S. Department of Health and Human Services, indicating the services support health-related facilities where vending machines provide essential goods or services to patients and staff. While specific locations and contact details are not provided, performance is expected to occur wherever the agency's vending equipment is deployed, requiring contractors to operate efficiently across potentially dispersed or remote sites. All service activities must be thoroughly documented to ensure accountability, audit readiness, and consistent service standards throughout the contract term.

Nashville Area Indian Health Svc

POSTED

DEADLINE

Fuel System Preventive Maintenance ServicesThe contract entails the provision of annual preventive maintenance services for all fuel system components at the U.S. Embassy in Podgorica, including storage tanks, pumps, filters, transfer systems, and associated controls. The work must be performed to ensure the continued safety, operational reliability, and full compliance with manufacturer specifications and environmental regulations, maintaining the integrity of critical fuel infrastructure essential to embassy operations. All maintenance activities are required to meet stringent standards to prevent downtime, mitigate hazards, and uphold federal and host nation compliance requirements. This subcontract opportunity is posted with a response deadline of August 17, 2026, and is categorized under NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance. The place of performance is firmly established in Podgorica, Montenegro, with the U.S. Department of State’s Embassy serving as the contracting entity. While no set-aside provisions or specific point of contact details are provided, interested parties must submit proposals prior to the stated deadline to be considered for award, with performance expectations centered on precision, regulatory adherence, and uninterrupted system functionality.

US Embassy Podgorica

POSTED

DEADLINE

CO₂ Fire Suppression System Inspection and MaintenanceThe contract involves the annual inspection and maintenance of a CO₂ fire suppression system serving nine cylinders, requiring comprehensive evaluations including weight verification, visual examinations, and functional testing of critical components such as pipe integrity, pressure switches, alarms, and pull cables. All nine hoses associated with the system must be replaced as part of the required maintenance, ensuring continued operational reliability and safety compliance. The work is governed under a Small Business Set-Aside designation, reserved exclusively for small businesses as defined by the SBA, and is classified under NAICS code 811310 for industrial and commercial equipment and machinery repair and maintenance. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and is administered by the Department of Homeland Security’s Sflc Procurement Branch 2. The performance location is specified with a zip code of 04841, though the exact city and state are not provided.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

On-Site Installation and Training ServicesThe contract entails the delivery, setup, and on-site training for clinical staff at the Minneapolis VAHCS regarding the proper operation and safety protocols for wheelchair scissor lifts. Services are to be performed directly at the facility located in Minneapolis with a ZIP code of 55417, ensuring that personnel are fully competent in using the equipment safely and efficiently. The work falls under NAICS code 811310, indicating it involves other miscellaneous repair and maintenance services, and is structured as a subcontract. The opportunity was posted on July 24, 2026, with a response deadline of July 31, 2026, at 9:00 PM, allowing interested vendors a short window to submit proposals. The contracting authority is the Department of Veterans Affairs through the Network Contract Office 23, and the performance location is fixed at the Minneapolis facility with no flexibility in location. No set-aside type is specified, meaning the contract is open to all eligible contractors regardless of business size or ownership category.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

Repair and On-Call Service SupportThe contract requires provision of emergency repair services for dishwashing machines with a guaranteed response time of no more than 48 hours from the time of service request. All necessary parts, labor, and travel expenses are included in the scope of work, except for damages resulting from negligence by the Government. The services are to be performed at the designated location in Panama City, with the contractor responsible for ensuring timely and effective restoration of equipment functionality. This is a subcontract under the North American Industry Classification System code 811310, issued by the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Proposals must be submitted by the deadline of August 17, 2026, and the opportunity was posted on July 24, 2026, with no set-aside provisions specified.

Navsup Flt Logistics Ctr Jacksonville

POSTED

DEADLINE

Preventative Maintenance ServicesPreventative maintenance services are required for a leased dishwashing machine, with all work to be performed in strict alignment with the manufacturer's guidelines to ensure optimal performance and longevity. Services must be scheduled strategically to avoid any interruption during peak meal periods, maintaining uninterrupted operations for the facility. The contract is classified as a subcontract under NAICS code 811310 and is issued by the Naval Supply Systems Command Fleet Logistics Center Jacksonville under the Department of Defense. The work is to be performed in Panama City, and responses are due by August 17, 2026, with the solicitation posted on July 24, 2026. All maintenance activities must prioritize operational continuity and compliance with technical specifications without impacting daily service delivery.

Navsup Flt Logistics Ctr Jacksonville

POSTED

DEADLINE

More opportunities from Department Of Veterans Affairs → 246-NETWORK Contracting Office 6 (36C246)

Same awarding agency

Technical Support Services for LYNX SoftwareThe contract awards one-year technical support services for the LYNX software, encompassing comprehensive assistance such as managing support tickets, evaluating priority levels, providing command syntax guidance, offering system usage support, documenting issues, and overseeing escalation procedures. All support activities must be coordinated exclusively through a designated representative from the Department of Veterans Affairs, ensuring alignment with federal protocols and communication standards. This subcontract is structured as a Total Small Business Set-Aside under the SBA program, reserved exclusively for small business concerns as defined by FAR 19.5, with the NAICS code 541512 indicating it falls under Custom Computer Programming Services. The solicitation was posted on July 24, 2026, with responses due by July 28, 2026, and is administered by the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs, with no specified place of performance other than federal oversight.

Computer Systems Design Services

POSTED

DEADLINE

Diagnostic Equipment and Tooling ServicesThe contract seeks specialized leak detection tools and equipment for refrigeration system diagnostics, including electronic sniffers, UV dye kits, and pressure testing devices, to be provided or rented as part of diagnostic services. The requirement is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, ensuring preference for businesses owned and controlled by service-disabled veterans. The North American Industry Classification System code 532490 applies, indicating the focus is on other commercial and industrial machinery and equipment rental and leasing activities. The opportunity was posted on July 24, 2026, with responses due by July 27, 2026, at 4:00 p.m., and it is administered by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6. The place of performance and specific location details are not specified, and the point of contact information is unavailable in the provided data.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Refrigerant Supply and Handling LogisticsThe contract titled Refrigerant Supply and Handling Logistics is a subcontract reserved exclusively for Service-Disabled Veteran-Owned Small Businesses under the SDVOSB set-aside program, as defined by FAR 19.14. It requires the procurement and delivery of regulated refrigerants including R-410A and R-22 for use in system recharge operations, with strict compliance mandated for the storage, transportation, and documentation of ozone-depleting substances in accordance with environmental regulations. All activities must adhere to federal guidelines ensuring safe handling and regulatory traceability throughout the supply chain. The solicitation was posted on July 24, 2026, with responses due by 4:00 PM on July 27, 2026. The North American Industry Classification System code 424690 applies, indicating the scope centers on wholesale trade of HVAC and refrigeration materials. The awarding agency is the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6, though no specific place of performance or contact details are provided. The contract emphasizes compliance with environmental safeguards and proper documentation for regulated substances, placing significant operational and administrative responsibility on the vendor to maintain regulatory integrity from delivery through end-use.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

DEADLINE

Technical Documentation and Compliance SupportThe contract requires the preparation and submission of comprehensive technical documentation to support a procurement response, including detailed product specifications, compliance statements, and official OEM authorization letters. All deliverables must meet the necessary regulatory and operational standards to ensure the product’s suitability for acquisition, with a strict deadline for submission on July 29, 2026 at 1:00 PM. The work is classified as a subcontract under NAICS code 541690, indicating it falls under other scientific and technical consulting services, and is being managed by the Department of Veterans Affairs through its 246-NETWORK Contracting Office 6. The performance location is specified as Salem, with a ZIP code of 24153, though no specific city or state details are provided beyond that. The solicitation was posted on July 24, 2026, and interested parties must respond before the deadline to be considered.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Specialized Equipment Delivery and LogisticsThe contract entails the specialized transportation and delivery of a scissor lift from its origin to 1970 Roanoke Blvd, Salem, VA, with a strict requirement for lift-gate service, secure transport methods, and on-site unloading to ensure safe and proper handling of the equipment. The delivery must be executed with precision to meet the needs of the end location, emphasizing risk mitigation and attention to detail throughout the logistics process. The work falls under NAICS code 484220, classifying it as freight transportation Arranged by a third party, and is structured as a subcontract within the broader procurement framework of the Department of Veterans Affairs. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, at 1:00 PM, indicating a short but critical procurement window for qualified carriers. The performance location is clearly defined as Salem, Virginia, with a ZIP code of 24153, and the contracting office is the 246-NETWORK Contracting Office 6 under the Department of Veterans Affairs. Although no point of contact or set-aside details are specified, the requirement for specialized handling of heavy machinery suggests bidders must possess appropriate equipment, certified personnel, and documented experience in transporting sensitive or bulky industrial equipment under controlled conditions.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Scissor Lift Supply – OEM or Authorized DistributorThe contract requires the supply of one new MEC Micro 26-XD Scissor Lift with Xtra-Deck, fully functional and in full compliance with the manufacturer’s specifications, including all necessary packaging, documentation, and timely delivery. The equipment must be procured from an OEM or authorized distributor to ensure authenticity, performance, and warranty validity. The place of performance is specified as Salem with a ZIP code of 24153, indicating the final destination for delivery and acceptance. The solicitation is classified as a subcontract under NAICS code 333924, which pertains to construction machinery and equipment manufacturing. The Department of Veterans Affairs through its 246-NETWORK Contracting Office 6 is the overseeing agency, and responses are due by July 29, 2026, at 1:00 PM, with the opportunity posted on July 24, 2026. No set-aside provisions are specified, and the contract is open to eligible contractors without restriction based on small business status or other classifications.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

6515--Hospital Consumables -Blood Pressure CuffsThe solicitation 36C24626Q0785, titled “6515--Hospital Consumables - Blood Pressure Cuffs,” is a Total Small Business Set-Aside issued by the Department of Veterans Affairs through Network Contracting Office 6 in Hampton, Virginia. It requests quotes for two commercial medical items: the MP00881 EKG cable and the MP00929 adult medium and long blood pressure cuff, with a base quantity of 400 units each and four optional one-year extension periods, each also for 400 units. The solicitation is structured as a Firm-Fixed-Price contract under FAR Part 12 for commercial items, with pricing to be submitted separately by offerors on company letterhead. The response deadline has been extended to Thursday, July 30, 2026, at 11:00 a.m. EST, and submissions must be sent electronically to Ruth Morris at ruth.morris@va.gov. The contract is governed by a best-value trade-off approach, evaluating technical capability, past performance, and price without assigned weights or adjectival ratings. The delivery location is the Salem VA Medical Center in Salem, Virginia, under FOB destination terms, meaning the contractor assumes all transportation costs and risks until delivery. Equivalent items to the listed part numbers are acceptable, and the VA internal item number 58202 is not tied to a specific manufacturer. The NAICS code is 339113, and the contracting office requires compliance with FAR and VAAR clauses including those on small business utilization, equal opportunity, counterfeit parts prevention, Section 508 accessibility, and security requirements such as personal identity verification and cybersecurity controls. Contractors must hold a current UEI and CAGE code, and all proposals must include completed SF 1449, representations, certifications, and a Section 508 compliance checklist. Invoicing must occur electronically through VA’s EIPP or X12 EDI, and no paper or fax submissions are permitted. Packaging must meet common carrier standards, and while item identification details like CAGE codes and brand names are required for traceability, no specific labeling, barcode, or MIL-STD requirements are mandated. The contract has no stated estimated value due to blank pricing fields, and final award will result from a comprehensive evaluation of submissions by the Contracting Officer’s Representative at the program office, who also conducts acceptance.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

J063--LYNX PANIC ALARM SERVICE AGREEMENTThe J063–LYNX PANIC ALARM SERVICE AGREEMENT is a total small business set-aside solicitation under FAR 19.5, issued by the Department of Veterans Affairs’ Network Contracting Office 6 in Hampton, Virginia, for a one-year technical support contract to maintain LYNX software from July 31, 2026, through July 30, 2027. The acquisition, designated under NAICS code 561621 with a size standard of 1,500 employees, is restricted to eligible small businesses including Service-Disabled Veteran-Owned Small Businesses (SDVOSB) and Veteran-Owned Small Businesses (VOSB), which must be certified in the SBA’s VIP database to receive credit. The contract is awarded on a best-value trade-off basis—not LPTA—where technical capability and price are the primary evaluation factors, with SDVOSB/VOSB status considered as part of the broader assessment. The scope includes sustained access to a technical support portal, ticket management, priority assessment, and direct assistance with LYNX command syntax and system operations, all performed at the Hampton VA Medical Center. The contract requires strict adherence to over 20 federal acquisition regulations, including clauses addressing ethical conduct, whistleblower protections, trafficking in persons, equal opportunity for veterans and workers with disabilities, and DEI discrimination prohibition, with several deviation clauses tailored to VA’s specific requirements. Personnel must undergo Personal Identity Verification (PIV) and may require Tier 3 or Tier 5 background investigations for facility access, while compliance with Section 889 of the NDAA prohibits use of covered telecommunications equipment from designated foreign entities. All invoices must be submitted electronically via the VA’s EIPP system, with payments processed through the VA Financial Services Center in Austin, Texas. The estimated award value is up to $25 million, though no line-item pricing details are filled in the solicitation. Offerors must submit a separate technical proposal and price volume via email, comply with VA Section 508 accessibility requirements, report prohibited products, and ensure flow-down of key clauses to subcontractors. Importantly, despite SAM’s continued requirement for outdated representations like 52.222-25 and 52.212-3(d), these will not be evaluated or enforced, and contractors are not expected to alter their SAM registrations.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

2420--265 Compact Track LoaderThe solicitation is for a 265 Compact Track Loader under contract number 36C24626Q0707, issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 located in Hampton, Virginia. This is a total small business set-aside as defined by FAR 19.5, meaning only small business concerns are eligible to bid, and the NAICS code 333112 applies to the manufacturing of construction and mining machinery. The opportunity was posted on July 24, 2026, with a response deadline of July 30, 2026, at 2:00 PM Eastern Time. The equipment is required for performance in Asheville, North Carolina, with a ZIP code of 28805. Kristine E. Woodbury, Contract Specialist, is the primary point of contact and can be reached at Kristine.Woodbury@va.gov for questions or clarification regarding the solicitation. The full solicitation details and submission portal are available through the provided SAM.gov link.

Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing

POSTED

DEADLINE

6515--DE MAYO ADAPT2FIT KNEE POSITIONERThe Department of Veterans Affairs Network Contracting Office 6 intends to award a sole source Firm-Fixed-Price purchase order to INNOVATIVE MEDICAL PRODUCTS, Inc. for the DeMayo Adapt2Fit Knee Positioner to be delivered to the Asheville VAMC in North Carolina. This action is supported under FAR 13.106-1(b), allowing solicitation from a single source, and includes a NAICS code of 339113 with a small business size standard of 800 employees. The requirement is for a one-time delivery and is not a competitive solicitation. Responsible sources may submit information demonstrating their capability to fulfill the requirement by 12:00 P.M. EDT on Wednesday, July 29, 2026, to assist the Government in determining whether to proceed without competition. All submissions must be sent via email to Zanona Pickett at zanona.pickett@va.gov, and telephone inquiries are not accepted. The Government will not reimburse any costs incurred in preparing responses, and its decision not to compete the contract based on submissions is at its sole discretion.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

6515--Adapt Air XL SystemThe Department of Veterans Affairs, through its Network Contracting Office 6, is conducting market research to assess industry capability to supply eight Adapt Air XL Systems or equivalent units for delivery to 100 Emancipation Dr, Hampton, VA 23667. This request for information is strictly for planning purposes and does not constitute a solicitation, nor will it result in a contract award or reimbursement of response preparation costs. All responses are non-binding and will be used solely to evaluate market interest and determine potential set-aside eligibility under Federal Acquisition Regulation guidelines, with the North American Industry Classification System code 339112 and a small business size standard of 1,000 employees. Contractors wishing to claim preference as a veteran-owned small business must be registered with the VIP database at veterans.certify.sba.gov and currently active in SAM.gov. Response deadlines are set for Wednesday, July 29th, 2026, at 10:00 AM EST, with submissions required to include business name, address, DUNS and UEI numbers, SAM registration details, NAICS code, business size classification, type of ownership such as veteran-owned or service-disabled veteran-owned, and indication of interest in providing through the Federal Supply Schedule or open market including any applicable contract numbers. The point of contact is Contract Specialist Charlsi Brooker, reachable via email at Charlsi.Brooker@va.gov or phone at 757-728-7216. No discussions, debriefings, or returns of submissions will be provided, though information gathered may inform future solicitations. Responses must reference solicitation number 36C24626Q0836 and adhere to all specified formatting and registration requirements to be considered valid for market research purposes.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

J041--558-22-172, Replace Chillers in AHU 1 and 2The contract is a firm fixed-price solicitation issued by the Department of Veterans Affairs through Network Contracting Office 6 for the replacement of chillers serving Air Handler Units 1 and 2 at the Durham VAMC in North Carolina. The project, identified by project number 558-22-172 and solicitation number 36C24626B0029, is a total service-disabled veteran-owned small business (SDVOSB) set-aside under NAICS code 236220 with an estimated value between $1,000,000 and $5,000,000. Only contractors certified in the SBA VetCert database as SDVOSBs and registered in the System for Award Management (SAM) with active status are eligible to respond. The work includes full replacement of chillers, associated pumps, glycol make-up systems, energy management controls, and related electrical upgrades, with all new equipment required to conform to VA Specification 23 09 23 and be integrated into existing controllers. The project must be completed within 270 days of the notice to proceed, and all work must be performed while maintaining uninterrupted 24/7 operations of the medical facility. Construction activities must be carefully phased across first, second, and third shifts, with any utility outages—including electrical, water, steam, or fire protection systems—requiring written approval at least 20 days in advance and scheduled only during second shift or weekends. Contractors must submit detailed phasing plans for COR approval and provide weekly progress meeting minutes. No materials may be stored on-site without COR authorization. All personnel must wear approved identification, comply with lock-out tag-out procedures, and adhere to NFPA standards for hot work and egress. Daily notification of personnel arrival and departure is mandatory, and any damage to existing facilities must be restored to original condition. As-built drawings must be submitted in PDF format with contractor markups. Access to all solicitation documents is restricted to the SAM Contract Opportunities website, and no telephonic requests for information are permitted. The only designated point of contact for all inquiries is Contract Specialist Alice Custis.

Commercial and Institutional Building Construction

POSTED

DEADLINE

in about 1 month