This Government Contract opportunity from Department Of Veterans Affairs was posted on July 24, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Preventive and Emergency Maintenance Services

Closed

Federal

Submission Closed08/19/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Commercial Dishwashing & Steam Equipment ServicesThis subcontract opportunity with the Georgia Institute of Technology involves providing specialized repair and preventative maintenance for commercial dishwashers and steam-based equipment within dining facility projects. The scope of work includes critical technical tasks such as descaling boilers, repairing pumps, cleaning spray arms, and replacing steam valves to ensure all systems remain fully operational. Qualified candidates must hold a valid plumbing or mechanical license to perform these services. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 811310.

Georgia Institute of Technology

POSTED

DEADLINE

Commercial Hot-Side Equipment Repair & MaintenanceThis subcontract for Commercial Hot-Side Equipment Repair and Maintenance involves providing repair and preventative maintenance services for commercial cooking and heating equipment at Georgia Institute of Technology dining facilities. The scope of work includes burner cleaning, pilot light repair, calibration of ovens and broilers, and the replacement of heating elements. The primary objective is to ensure all cooking equipment is safe and operational, with the delivery of completed preventative maintenance checklists. Qualified contractors must hold a mechanical license or a gas fitter certification to perform these services. The solicitation was posted on October 28, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 811310 and is intended for those working as subcontractors for prime contractors on these specific institutional projects.

Georgia Institute of Technology

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include the replacement of friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. All work must adhere to manufacturer specifications, and the final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This is a fee-for-service solicitation with a lump sum award based on best value. Interested offerors must submit a bid sheet, a completed supplier packet including a W-9 and self-certification form, and proof of insurance by November 3, 2026. The contract is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone concerns, and requires compliance with various Federal Acquisition Regulations, including Service Contract Labor Standards and Buy American provisions. Proposals must include an itemized breakdown of costs and warranty information for parts and labor.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 28, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

IFB #26028 - 295.00 - Elevator Maintenance on the Governor Mario M Cuomo Bridge for NY Division

Solicitation # 49244

The New York State Thruway Authority is soliciting bids for the maintenance, inspection, repair, and testing of eight Fraco SEL-1000B Industrial Lifts for Personnel and Loads. These lifts are located within the New York Division at the Governor Mario M. Cuomo Bridge in Tarrytown, New York. The scope of work includes performing required service on a monthly, quarterly, and yearly basis to ensure operational safety and compliance. This solicitation, identified as IFB 26028, falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. Interested contracting firms must submit their responses by the deadline of November 30, 2026. The procurement is being managed by the New York State Thruway Authority Procurement Services.

New York State Thruway Authority - Procurement Services

POSTED

DEADLINE

On-Call Tent Repair and Emergency MaintenanceThis subcontract, titled On-Call Tent Repair and Emergency Maintenance, provides specialized labor for major repairs and emergency maintenance on Maryland Historical Trust facility projects. The contractor is responsible for performing structural overhauls and emergency repairs to canvas and tent structures both during and after normal working hours, utilizing industrial sewing equipment and specialized repair kits. All work must be performed in strict adherence to site-specific soil disturbance protocols to protect the project environment. Managed under the Maryland Department of Planning, the contract requires the delivery of fully repaired structures accompanied by itemized invoices. The solicitation was posted on October 28, 2026, with a response deadline of November 16, 2026. The work falls under NAICS code 811310, focusing on providing essential support services to prime contractors overseeing these historical facility projects.

Department of Planning

POSTED

DEADLINE

ISO 14952 Level 300A Precision CleaningThis small business set-aside subcontract involves providing high-level technical cleaning services for prime contractors supporting the NASA Shared Services Center. The primary objective is the precision cleaning of filter components to meet ISO 14952 latest revision level 300A standards, ensuring that all parts are free of residue and particle contamination for use in space-flight environments. To achieve these rigorous specifications, the contractor must utilize cleanroom facilities or specialized chemical cleaning baths. All delivered components must be accompanied by ISO 14952 Level 300A certification. This opportunity falls under NAICS code 811310 and is specifically designated as a total small business set-aside.

NASA Shared Services Center

POSTED

DEADLINE

Emergency Generator and Automatic Transfer Switch (ATS) Maintenance ServicesThis subcontract for the Indian Health Service involves providing comprehensive maintenance services for emergency generators and automatic transfer switches at facilities in Lawton, Oklahoma. The scope of work includes performing preventive maintenance, operational testing, and corrective repairs to ensure emergency power supply systems remain fully functional. Key technical requirements include monthly inspections, oil changes, 30-minute building-load tests, and annual 4-hour load-bank tests, as well as updating ATS software and firmware to maintain NFPA 110 compliance. To qualify for this engagement, contractors must possess MTU/Detroit Diesel certification and have access to the necessary load-bank equipment. The primary objective is to deliver ready-to-run systems supported by detailed electronic maintenance reports. This opportunity is designated as a Buy Indian Set-Aside under NAICS code 811310, specifically for the Department of Health and Human Services.

Indian Health Service

POSTED

DEADLINE

Centrifugal Pump Repair & OverhaulThis subcontract involves the comprehensive repair and overhaul of a centrifugal pump unit supporting US Navy NAVSUP Weapon Systems Support projects. The scope of work includes the complete teardown, technical evaluation, and mechanical repair or modification of the unit in accordance with Cage Code 93232 and Reference Number RW-173417. Following repairs, the contractor is responsible for reassembly and functional testing conducted under TDP Version 005. The final deliverable is one fully operational pump unit that must successfully pass a Government Source Inspection. This project falls under NAICS code 811310 and is managed through the Department of Defense. Interested parties should note the response deadline of November 12, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Centrifugal Pump Overhaul and Repair ServicesThis subcontract for Centrifugal Pump Overhaul and Repair Services supports NAVSUP Weapon Systems Support Mechanical projects for the Department of Defense. The scope of work involves the complete teardown, evaluation, and mechanical repair of centrifugal pumps for prime contractors. Technicians are required to disassemble the pumps, assess internal components for corrosion and wear, and execute repairs in strict accordance with technical orders and drawings for CAGE 63857, Ref. No. LM 615. The project requires the use of precision machining tools and specialized pump testing rigs to ensure the delivery of a fully functional and repaired unit. Classified under NAICS code 811310, the opportunity was posted on October 28, 2026, with a response deadline of November 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Fire Hose Inspection and Hydrostatic TestingThis subcontract opportunity involves providing physical inspection and pressure testing services for fire hoses on US Navy vessel projects. The selected contractor will be responsible for inspecting, hydro testing, and certifying fire hoses using hydrostatic testing pumps and gauges to ensure full compliance with established fire hose testing standards. The primary deliverable for this engagement is the provision of official hydrostatic test certifications for all processed hoses. The project is managed under the Department of Defense through the Navsup Flt Logistics Ctr Norfolk and will be performed in Virginia Beach. Interested parties should note that the response deadline is November 2, 2026, at 3:00 PM. The work falls under NAICS code 811310 and is intended for prime contractors operating on Navy vessel projects.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

SCBA and Portable Fire Extinguisher InspectionThis subcontract involves providing specialized inspection, flow testing, and certification services for portable firefighting equipment on US Navy vessel projects. The scope of work includes the inspection and certification of portable fire extinguishers, as well as flow testing for Scott SCBA packs and their associated cylinders using dedicated flow testing equipment. The selected provider must possess the necessary technical qualifications to certify both the SCBA units and extinguishers and is responsible for delivering all required certification reports. The project is managed under the Department of Defense through the Navsup Fleet Logistics Center Norfolk and will be performed in Virginia Beach, Virginia. Classified under NAICS code 811310, the opportunity was posted on October 28, 2026, with a response deadline of November 2, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

about 7 hours ago

DEADLINE

in 5 days

AI Contract Overview

The contract is for scheduled preventive maintenance and emergency repairs of a mobile PET/CT system, ensuring ongoing operational reliability through OEM-standard calibration, diagnostics, and performance optimization. All work must adhere to original equipment manufacturer specifications to maintain system accuracy and regulatory compliance, with services covering both routine upkeep and urgent response to system failures. The contract is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside, specifically targeting qualified SDVOSB vendors to perform services at the designated performance location in Temple, Texas, 76504-7451. The solicitation was posted on July 24, 2026, with responses due by August 19, 2026, and is managed by the Department of Veterans Affairs through the 257-NETWORK Contract Office 17 under NAICS code 811310 for medical and dental equipment and supplies repair and maintenance.

General Info

Preventive and emergency maintenance for mobile PET/CT system in Temple, Texas, by SDVOSB vendor under VA contract.

Agency

Department Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Temple, TX, 76504-7451

Set-Aside

SDVOSBC

Documents

This scope was carved out of 36C25726Q0755.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

W065--CTX Mobile PET/CT Lease

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 24

subcontract

Response DeadlineAug 19

Deadline has passed

Submission Closed

08/19/2026, 03:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Veterans Affairs → 257-NETWORK Contract Office 17 (36C257)

Office AddressN/A

ContactsNo contact information available

Full Description

Scheduled preventive maintenance and emergency repairs for the mobile PET/CT system, including calibration, diagnostics, and performance optimization using OEM standards.