Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Miter Gate Motor Repair and Overhaul

Active

Federal

Response Deadline08/10/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines a full repair and overhaul of one Government-owned Miter Gate Motor, requiring complete inspection, disassembly, cleaning, repair, reassembly, and operational testing to restore the unit to like-new condition. All work must adhere strictly to original equipment manufacturer specifications, including bearing replacement, electrical and mechanical testing, and re-insulation of components. The effort encompasses both mechanical and electrical systems to ensure full functionality and longevity after servicing. This subcontract is a Total Small Business Set-Aside under the SBA, with the NAICS code 811310, and is issued by the Department of Transportation through the 6923G5 Great Lakes St Lawrence Swy Development Corporation. Performance is required at Massena, NY, 13662, with proposals due by August 10, 2026. The solicitation, posted on July 24, 2026, is intended exclusively for small businesses and mandates comprehensive technical execution to meet federal standards for equipment reliability and safety.

General Info

Repair and overhaul Miter Gate Motor to like-new condition per OEM specs, small business set-aside, Massena, NY, proposals due August 10, 2026.

Agency

Department Of Transportation → 6923G5 Great Lakes St Lawrence Swy Development CorporationView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

Massena, NY, 13662, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 06:00:00 PM UTCin 17 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 6923G5 Great Lakes St Lawrence Swy Development Corporation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Transportation → 6923G5 Great Lakes St Lawrence Swy Development Corporation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete inspection, disassembly, cleaning, repair, reassembly, and operational testing of one Government-owned Miter Gate Motor. Includes bearing replacement per OEM specs, electrical and mechanical testing, re-insulation, and return to like-new condition.

Similar Contracts

Same NAICS industry code

Small, Local, and DBE/MBE/WBE Supplier ParticipationHenry County Board of Commissioners is inviting certified small, disadvantaged, minority-, women-, and veteran-owned businesses to serve as subcontractors or suppliers in support of generator maintenance services under a subcontract opportunity. The solicitation is open to businesses certified under relevant disadvantaged business enterprise programs and aims to foster local economic participation through targeted subcontracting roles. The NAICS code 811310 specifies the scope of work centered on industrial and commercial equipment repair and maintenance, with performance expected to occur within Georgia. The posting date is July 24, 2026, and responses must be submitted by August 25, 2026, at 8:00 PM Eastern Time. While no specific set-aside designation is listed, the opportunity explicitly encourages participation from underrepresented business owners. Interested parties should access the full solicitation details via the provided state portal link before the deadline.

Henry County Board of Commissioners

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Generator Inspection and Maintenance ServicesHenry County Board of Commissioners is seeking a subcontractor to conduct biannual inspections and preventive maintenance on 31 generator units located across various county facilities. The generators include both diesel and natural gas-powered models, each with specific technical ratings that must be adhered to during servicing. The work requires qualified personnel capable of performing comprehensive maintenance procedures to ensure operational reliability and safety standards are consistently met. All tasks must be completed on a scheduled biannual basis across all designated sites. This procurement is classified under NAICS code 811310 for Miscellaneous Repair and Maintenance. The solicitation was posted on July 24, 2026, and responses are due by August 25, 2026, at 8:00 PM. The contract is structured as a subcontract and no set-asides have been designated. Performance of the services will occur at facilities within Henry County, Georgia, though exact locations are not specified. The full solicitation can be accessed via the provided state procurement portal link.

Henry County Board of Commissioners

POSTED

about 12 hours ago

DEADLINE

in about 1 month

RFP #27-03, Generator Services and Maintenance - Annual ContractHenry County is seeking qualified vendors to provide annual generator services and maintenance for generators located across various county buildings under a renewable one-year contract. The selected contractor must supply all necessary labor, materials, equipment, and services to ensure proper operation, scheduled maintenance, and timely repairs of the generators. Proposals must be submitted by 3:00 PM local time on August 25, 2026, and can be delivered in person, via mail or common carrier to the Purchasing Department at 140 Henry Parkway, McDonough, GA 30253, or electronically through the County’s eProcurement Portal. Emailed or faxed submissions will not be accepted. Once submitted, proposals cannot be withdrawn for sixty days except as permitted by law, and the County retains the right to reject any or all proposals without explanation or to waive minor technical discrepancies. The solicitation is managed by the Henry County Board of Commissioners, with primary contact information provided through Christina Dismuke at purchasing@henrycountyga.gov or 770-288-6027.

Henry County Board of Commissioners

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Repair & Parts for sheet ironer at Richmond SSLCThe contract solicitation titled Repair & Parts for sheet ironer at Richmond SSLC is issued by the Texas Health and Human Services Commission under solicitation number HHS0017554v3, posted on July 24, 2026, with a response deadline of August 7, 2026, at 4:30 PM CT. This solicitation is categorized as a SLED procurement, indicating it is directed toward state, local, or educational entities, and the work is to be performed in Texas, specifically at the Richmond SSLC facility. The scope involves the repair and provision of necessary parts for a sheet ironer, though specific technical requirements or part specifications are not detailed in the provided metadata. The primary point of contact for inquiries is Kimberly Andrews, reachable at 972-337-6254 or Kimberley.Andrews@hhs.texas.gov, and all submissions must be made through the Texas SmartBuy portal via the provided UI link. No set-aside status or NAICS code is listed, suggesting the opportunity is open to all qualified offerors without specific small business or socioeconomic preferences. Bidders are expected to respond by the stated deadline with proposals addressing the repair needs, parts supply, and associated service terms for the equipment at the designated location.

Health and Human Services Commission

POSTED

about 14 hours ago

DEADLINE

Repair and On-Call Service SupportThe contract requires provision of emergency repair services for dishwashing machines with a guaranteed response time of no more than 48 hours from the time of service request. All necessary parts, labor, and travel expenses are included in the scope of work, except for damages resulting from negligence by the Government. The services are to be performed at the designated location in Panama City, with the contractor responsible for ensuring timely and effective restoration of equipment functionality. This is a subcontract under the North American Industry Classification System code 811310, issued by the Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Jacksonville. Proposals must be submitted by the deadline of August 17, 2026, and the opportunity was posted on July 24, 2026, with no set-aside provisions specified.

Navsup Flt Logistics Ctr Jacksonville

POSTED

about 16 hours ago

DEADLINE

Preventative Maintenance ServicesPreventative maintenance services are required for a leased dishwashing machine, with all work to be performed in strict alignment with the manufacturer's guidelines to ensure optimal performance and longevity. Services must be scheduled strategically to avoid any interruption during peak meal periods, maintaining uninterrupted operations for the facility. The contract is classified as a subcontract under NAICS code 811310 and is issued by the Naval Supply Systems Command Fleet Logistics Center Jacksonville under the Department of Defense. The work is to be performed in Panama City, and responses are due by August 17, 2026, with the solicitation posted on July 24, 2026. All maintenance activities must prioritize operational continuity and compliance with technical specifications without impacting daily service delivery.

Navsup Flt Logistics Ctr Jacksonville

POSTED

about 16 hours ago

DEADLINE

Compressor and Air Dryer Equipment RepairThe contract titled Compressor and Air Dryer Equipment Repair is a subcontract under a Total Small Business Set-Aside, targeting qualified small businesses as defined by the SBA. It encompasses the mechanical servicing of industrial compressors and air dryers, including essential maintenance tasks such as oil changes, valve repairs, motor diagnostics, and replacement of critical components. Performance of the work is specified to occur in Newburgh, New York, with a ZIP code of 12550. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026, at 3:00 PM. The North American Industry Classification System code for this procurement is 811310, which corresponds to industrial and commercial machinery and equipment repair and maintenance. The contracting activity is affiliated with the Department of Defense under the W7NR Uspfo Activity Nyang 105 designation, though specific point of contact details are not provided. Interested parties must respond through the SAM.gov portal using the provided link.

W7NR Uspfo Activity Nyang 105

POSTED

about 16 hours ago

DEADLINE

Breathing Air System Preventative MaintenanceThe contract titled Breathing Air System Preventative Maintenance involves routine inspection, testing, servicing, and repair of high-pressure breathing air systems used in hazardous environments. Scope of work includes calibration of equipment, replacement of filters, and comprehensive leak testing to ensure operational safety and compliance with stringent environmental and health standards. All tasks must be performed with precision to maintain system integrity, particularly where air quality directly impacts personnel safety. This subcontract is issued under a Total Small Business Set-Aside designation, as defined by the SBA and FAR 19.5, and is classified under NAICS code 811310. It is solicited by the Department of Defense through the W7NR Uspfo Activity Nyang 105 office, with performance required at a location in Newburgh, New York, zip code 12550. The opportunity was posted on July 24, 2026, with a response deadline of August 7, 2026, at 3:00 PM. The contract is open exclusively to small business concerns and requires qualified vendors to meet technical and regulatory standards for critical life-support systems.

W7NR Uspfo Activity Nyang 105

POSTED

about 16 hours ago

DEADLINE

USMMA - UNDERGROUND STORAGE TANK (UST) MANHOLE COVER REMOVAL AND REPLACEMENTThis solicitation, numbered 6923G226Q000025, is a combined synopsis and request for quotation issued under FAR Part 12 for the one-time removal, legal disposal, and replacement of ten degraded steel manhole covers—five large and five small—at the U.S. Merchant Marine Academy campus in Kings Point, New York. The replacement covers must be fiberglass-reinforced polymer (FRP), traffic-rated, non-conductive, and non-corrosive, meeting AASHTO H-20 and EN 124 Class D400 standards to enhance safety, eliminate electrical hazards, and ensure long-term durability. The acquisition is strictly set aside for small business concerns under NAICS code 811310, with offers from non-small businesses automatically rejected. The award will be made on a lowest price technically acceptable (LPTA) basis, evaluating technical capability and past performance on an acceptable/unacceptable scale, with only technically acceptable offers considered for price comparison. All offerors must hold an active SAM.gov registration, provide their Unique Entity Identifier, and comply with the Service Contract Act wage determination SCA 2015-4157 REV 31. A site visit is scheduled for July 28, 2026, and all questions must be submitted by July 30, 2026, via email to the designated contracting officer. Quotations, including a signed SF-1449, technical approach limited to five pages, and supporting documentation, must be received by email no later than 2:30 p.m. ET on August 4, 2026. The work must adhere to OSHA standards, New York State labor laws, and environmental regulations, with no hazardous material abatement required. The contract includes mandatory clauses on ethics, whistleblower protections, cybersecurity, Buy American requirements, and prohibition of trafficking in persons. Payment will be processed via electronic funds transfer under SAM.gov, with accelerated payments encouraged for small business subcontractors. No packaging, marking, or freight terms are specified, and no contract options or extensions are contemplated.

6923G2 DOT Maritime Administration

POSTED

about 16 hours ago

DEADLINE

inspection for PUMP, CENTRIFUGALThe USCG Surface Force Logistics Center is soliciting quotes to open, inspect, report, and potentially overhaul or repair two centrifugal pumps, manufacturer Flowserve, part number 2K6X4V-13RV-CD4, under solicitation number 70Z08026QAG092. This is a commercial item acquisition governed by FAR Subpart 12.6, with no written solicitation issued; quotes must be submitted by 9 AM EDT on November 24, 2025, to Eric.I.Goldstein@uscg.mil. Vendors must be registered in SAM.gov and may not substitute parts or use proprietary data, as the government does not own the rights to drawings or specifications. The requirement is set aside for small businesses, including HUBZone and total small business set-asides, and offers must be all-or-nothing. Award will go to the lowest technically acceptable price, based on a total firm fixed price covering all labor, materials, overhead, profit, and G&A for the open/inspect phase and any subsequent repair work. All work must be delivered F.O.B. Destination to the USCG SFLC in Baltimore, MD, between 7:00 AM and 1:00 PM, Monday through Friday. Acceptance is contingent upon proper preservation, packaging, and marking, with non-compliance resulting in rejection and nonpayment. Payment must be submitted electronically via the Invoice Processing Platform (IPP), and contractors must comply with multiple FAR clauses including those on equal opportunity, labor standards, trafficking in persons, Buy American, electronic funds transfer, and federal supply chain security mandates. The repair phase is conditional upon government review of the initial inspection report and written approval by the Contracting Officer, who will determine a not-to-exceed amount based on negotiated rates and proposed labor hours. Contractors must also adhere to strict compliance and reporting requirements related to subcontracting, whistleblower protections, ethical conduct, and electronic record retention, and must provide an estimated repair schedule with their quote.

Sflc Procurement Branch 1(00080)

POSTED

about 16 hours ago

DEADLINE

Repair by Replacement of Existing Fuel Dispensing System at the Seafront Compound Gas StationThe U.S. Embassy Manila, under the Department of State, is soliciting quotations to replace the existing fuel dispensing system at the Seafront Compound Gas Station in Manila, Philippines, under RFQ No. 19RP3826Q0080. The scope includes the complete removal and proper disposal of the current system, including SmartFill components and associated electrical systems, followed by the installation of a new fuel dispensing system integrated with the SmartFill Gen3 ATG system. Key components such as the SFM2053 4G LTE Communications module, SDM2007 ATG Interface with RS-232 connectivity, and A1514 LTE 4G antenna must be supplied and installed. Work must comply with U.S. OSHA and local safety regulations, adhere to NFPA 30A vapor control standards, and meet NEC Class I, Divisions 1 & 2 requirements for hazardous areas. The contractor must submit a detailed safety plan, a written disposal plan for purged fuel and equipment, and a formal commissioning report demonstrating successful system integration. All proposals must include manufacturer authorization proving the offeror is an authorized representative in the Philippines; failure to provide this renders the offer non-responsive. The contract also incorporates a one-year warranty on all equipment and workmanship, with defective items required to be replaced within seven calendar days of receipt. Final acceptance requires submission of operations and maintenance manuals and completion of personnel training. The solicitation is governed by numerous Federal Acquisition Regulation clauses including 52.212-4 for commercial items, 52.222-41 and related labor standards clauses, 52.222-50 with Alternate I for combating trafficking in persons, 52.203-13 for contractor ethics, and Buy American provisions under 52.225-1 and 52.225-3. Offerors must complete and sign Standard Form SF-18, provide detailed technical specifications in an Excel file using only green-highlighted fields, and submit technical documentation including manufacturer brochures or photographs. The NAICS code 811310 applies, and the procurement is not designated for small business set-asides. All submissions must be in English, transmitted electronically to ManilaPurchasing@state.gov, and not exceed 10MB per file; larger submissions require multiple emails. SAM registration is strongly encouraged; non-registered offerors must complete

US Embassy Manila

POSTED

about 16 hours ago

DEADLINE

J041--Refrigeration Circuit Leak Testing and RepairThe contract titled J041–Refrigeration Circuit Leak Testing and Repair is a service solicitation issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 located in Hampton, Virginia. It is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSB) Set-Aside, ensuring eligibility is restricted to businesses owned and controlled by service-disabled veterans, in accordance with FAR 19.14. The North American Industry Classification System code 811310 indicates the scope pertains to appliance repair and maintenance, specifically targeting refrigeration systems. The solicitation was posted on July 24, 2026, with a firm response deadline of July 27, 2026, at 4:00 p.m. Eastern Time, requiring timely submission for consideration. The place of performance is not explicitly defined, suggesting work may occur at various VA facilities requiring refrigeration system maintenance. Stephen M Nassan, Contract Specialist, serves as the primary point of contact and can be reached via email at Stephen.Nassan@va.gov for inquiries or submission guidance.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 16 hours ago

DEADLINE

More opportunities from Department Of Transportation → 6923G5 Great Lakes St Lawrence Swy Development Corporation

Same awarding agency

Specialty Grease for Motor ApplicationsThe contract is for the supply of a high-temperature, electrically non-conductive specialty grease designed for use in 440 VAC industrial motors, ensuring compatibility with OEM specifications for optimal lubrication and extended service life. The product must meet rigorous performance standards to withstand demanding operational conditions while maintaining electrical insulation properties critical for motor integrity and safety. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 424690 indicating wholesale trade of industrial suppliers. The opportunity was posted on July 24, 2026, with responses due no later than August 10, 2026, at 6:00 PM. Performance is required at Massena, New York, with a zip code of 13662. The contracting agency is the Department of Transportation under the 6923G5 Great Lakes St Lawrence Swy Development Corporation, though no specific point of contact is listed. All bids must be submitted through the SAM.gov portal linked in the posting.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Bearing Supply for Industrial MotorsThe contract involves the supply of OEM-specified bearings for the repair of high-voltage industrial miter gate motors, requiring strict adherence to fit, tolerance, and durability standards essential for reliable operation in electro-mechanical gate systems. All bearings must be compatible with existing industrial motor designs and meet performance benchmarks to ensure longevity and safety under heavy-use conditions in demanding environments. The procurement is structured as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 332993 indicating it falls under Other Fabricated Metal Product Manufacturing. The solicitation was posted on July 24, 2026, with a firm response deadline of August 10, 2026, at 6:00 p.m. The place of performance is in Massena, New York, with a zip code of 13662, indicating the work is tied to infrastructure operated by the Department of Transportation under the 6923G5 Great Lakes St Lawrence Seaway Development Corporation. The contract is not open to large businesses and requires strict compliance with all technical and regulatory requirements tied to small business certification and performance obligations. All submissions must be made through the official SAM.gov portal linked in the contract details.

Ammunition (except Small Arms) Manufacturing

POSTED

about 16 hours ago

DEADLINE

Maintenance and Testing on Miter Gate MotorThis solicitation is a Request for Quote (RFQ) issued under FAR Part 12 for commercial services to perform maintenance and testing on a Government-owned Miter Gate Motor, with all work strictly adhering to the specifications outlined in Attachment A, the Statement of Work. The requirement is set aside exclusively for small businesses, classified under NAICS code 811310 with a size standard of $12.5 million in annual revenue, and all offerors must be registered and active in SAM.gov at the time of submission and award. The contract type is firm fixed price, with performance limited to a strict 20-calendar-day window following award. The vendor is responsible for picking up the motor from the GLS Receiving Warehouse at 251 Fregoe Road, Massena, NY, conducting all work at their own facility, and returning the completed motor to the same location. All inquiries must be submitted via email to chora.snyder@dot.gov no later than August 3, 2026, at 2:00 PM EST. Quotes must be emailed to the same address and received no later than August 10, 2026, at 2:00 PM EST. The solicitation incorporates provisions and clauses in effect under Federal Acquisition Circular FAC 2026-01 dated March 13, 2026, and is issued as a combined synopsis/solicitation with no separate written solicitation to follow. Pricing details are specified in Attachment B, the Pricing Sheet, and awards are contingent on the availability of funds. The contracting activity is managed by the Department of Transportation through the Great Lakes St. Lawrence Sea Way Development Corporation, with Chora Snyder serving as the primary point of contact.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 16 hours ago

DEADLINE

On-Site Reinstallation and Commissioning SupportThe contract provides for on-site technical support to reinstall, align, and commission rebuilt gearboxes into existing lock infrastructure located at Massena, NY, as part of broader maintenance and modernization efforts. This work is critical to ensuring the operational integrity and efficiency of the lock system, requiring specialized expertise in mechanical reassembly, precision alignment, and system commissioning under field conditions. The contract is classified as a subcontract under NAICS code 238990, indicating it falls within other specialty trade contracting services, and is being managed by the Department of Transportation under the Great Lakes St Lawrence Survey Development Corporation. Performance of the work is directed to a place of performance in New Castle, PA, with a ZIP code of 19720, suggesting administrative or logistical coordination is centered there even though the physical work occurs at the Massena site. The contract was posted on May 12, 2026, and does not include specific solicitation numbers or set-aside designations, implying it was issued outside a formal federal procurement process, likely through direct negotiation or as part of a larger prime contract. Despite the lack of detailed contact information, the scope clearly demands highly skilled technicians with proven experience in heavy industrial machinery and lock system infrastructure, supporting long-term asset reliability and operational continuity in a key inland waterway facility.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Specialized Packaging and Transport of Rebuilt GearboxesThe contract entails the specialized design, execution, and delivery of secure packaging, preservation, and transport solutions for rebuilt gearboxes to ensure they arrive at their destination in Massena, NY, free from damage, misalignment, or corrosion. The work requires strict adherence to protective standards throughout the entire logistics chain, including material selection, environmental controls, and handling procedures tailored to the sensitivity of the gearboxes. All packaging must be engineered to withstand transit stresses while maintaining precise component alignment and preventing exposure to humidity, contaminants, or shock that could compromise functionality. The contract is classified under NAICS code 484220, indicating a focus on freight transportation by truck, and is structured as a subcontract tied to the Department of Transportation under the 6923G5 Great Lakes St Lawrence Swy Development Corporation. Performance is required to originate from New Castle, PA, with a ZIP code of 19720, and the work must be completed in alignment with federal and industry-specific logistical specifications. The posting date of May 12, 2026, signals a forward-looking procurement timeline, suggesting advanced planning for future shipments, and underscores the need for vendors to demonstrate proven capabilities in handling high-value, precision machinery under stringent environmental and mechanical safeguards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Gearbox Testing and Performance ValidationThe contract titled Gearbox Testing and Performance Validation requires comprehensive post-rebuild performance evaluation of gearboxes through load, vibration, thermal, and operational testing to verify reliability and conformity to original system specifications. The work focuses on validating that rebuilt components meet or exceed the design thresholds under real-world operational conditions, ensuring long-term durability and safety within the intended application environment. All testing must be executed in alignment with established engineering standards and documented comprehensively to demonstrate compliance. This subcontract is associated with the NAICS code 541380, indicating engineering services, and is managed by the Department of Transportation under the 6923G5 Great Lakes St Lawrence Swy Development Corporation. Performance is to be delivered at a designated location in New Castle, Pennsylvania, with a zip code of 19720. The contract was posted on May 12, 2026, and while no solicitation number or set-aside details are provided, it remains a subcontract under federal procurement processes with strict expectations for technical accuracy and verification.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Machining and Component FabricationThe contract entails the precision fabrication of replacement gearbox components including gears, shafts, and housings, demanding high-accuracy CNC machining to meet stringent dimensional tolerances and performance standards. All components must be manufactured using certified materials with full traceability and documentation to ensure compliance with aerospace or industrial mechanical specifications, emphasizing quality control and material integrity throughout the production process. The work is scoped under a subcontract arrangement and falls under the NAICS code 332999 for other fabricated metal product manufacturing. Performance of the contract is required at a location in New Castle, Pennsylvania, with a zip code of 19720, and the entity responsible for awarding the contract is the Department of Transportation under the 6923G5 Great Lakes St Lawrence Swy Development Corporation. Although the solicitation number and point of contact are not provided, the posting date indicates the opportunity was made available in May 2026, and all submissions must align with the technical and regulatory requirements for critical mechanical components used in transportation infrastructure systems.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Miter Gate Gearbox Rebuild and ReassemblyThe contract entails the complete disassembly, inspection, refurbishment, and reassembly of two miter gate drive gearboxes to meet original equipment manufacturer specifications, ensuring seamless compatibility with the existing lock infrastructure. All work must be performed with precision to restore full operational functionality, adhering strictly to OEM standards for performance, durability, and safety. The project demands specialized expertise in heavy mechanical systems and requires thorough documentation of each step to verify compliance and traceability throughout the refurbishment process. The work is to be performed at a designated location in New Castle, Pennsylvania, with a zip code of 19720, and falls under the NAICS code 333612 for other commercial and service industry machinery manufacturing. The contract is identified as a subcontract under the Department of Transportation, administered by the Great Lakes St. Lawrence Seaway Development Corporation. The solicitation was posted on May 12, 2026, and all deliverables must align with the technical and logistical requirements of the lock system to ensure uninterrupted waterway operations.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

DEADLINE