Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Relay Assembly Manufacturing & Supply

Active

Federal

Response Deadline09/03/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of nine units of a specific relay assembly, identified by part number L5503047-001 and National Stock Number 5945-01-607-7229HY, intended for use on the B-1 platform. The scope encompasses full production, including all necessary testing and quality assurance protocols to meet military specifications, with final delivery mandated to Tinker Air Force Base in Oklahoma. The work must be completed in accordance with defense standards, ensuring reliability and interoperability within the platform’s critical systems. This is a subcontract opportunity under the NAICS code 336413, which classifies it within the aerospace product and parts manufacturing sector. The solicitation was posted on August 3, 2026, with a response deadline of September 3, 2026, giving potential suppliers approximately one month to submit proposals. The contracting activity falls under the Department of Defense, specifically managed by the Defense Logistics Agency Aviation at Oklahoma City. While no set-aside provisions are specified, the procurement is exclusively for defense purposes and requires strict compliance with federal supply chain and quality control requirements.

General Info

Manufacture and supply nine L5503047-001 relay assemblies for B-1 platform, deliver to Tinker AFB by defense standards.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

OK

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineSep 3

Submission deadline

Response Deadline

09/03/2026, 04:59:00 AM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 9 units of relay assembly (P/N: L5503047-001, NSN: 5945-01-607-7229HY) for the B-1 platform, including production, testing, quality assurance, and delivery to Tinker AFB, OK.

Similar Contracts

Same NAICS industry code

SPACER ASSEMBLY, TAIL R

Solicitation # SPE8EF-26-Q-0157

The contract pertains to the procurement of 109 units of a spacer assembly for a tail rotor blade with NSN 1730-01-082-6504, issued under solicitation SPE8EF-26-Q-0157 by the Department of Defense through the Defense Logistics Agency. Delivery is required within 60 days of award, and responses must be submitted by August 13, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program certification, completion of DOD export-controlled data training, and prior authorization from DLA may access the restricted technical data. The contract also requires the seller to be certified by a CMMC Level 2 C3PAO to meet cybersecurity standards. All inquiries should be directed to Russell Keiser at russell.keiser@dla.mil.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 12 hours ago

DEADLINE

HARNESS, AIRCRAFT SAFET

Solicitation # SPE4A7-26-Q-0957

The contract specifies the procurement of a single aircraft safety shoulder harness with NSN 1680-00-555-2938 under purchase request 7017272193 for a quantity of 273 units, with delivery required within 497 days after award. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA-specific requirements, and all items must undergo inspection and acceptance at the point of origin. Non-accepted supplies must have all government identification removed, and each item must be physically marked in accordance with bare item marking standards. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled technical data, and formal DLA authorization may access such data. The solicitation number is SPE4A7-26-Q-0957, issued on August 3, 2026, with responses due by August 22, 2026, managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Grayson Andrews as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

SUPPORT, STRUCTURAL COM

Solicitation # SPE4A7-26-T-606Z

The contract pertains to the procurement of two support structural components for aircraft, identified by NSN 1560-00-795-8779, under solicitation SPE4A7-26-T-606Z, with a delivery deadline of 151 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards, source approval documentation, and inspection and acceptance procedures conducted at the point of origin. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, whether within the U.S. or abroad, and restricting access to contractors with approved JCP certification, completed DLA training, and formal authorization. Configuration changes require formal Engineering Change Proposal requests for any deviations or waivers. The item does not require Unique Identification per the Service customer’s request, though physical marking and removal of government identification from non-accepted supplies are mandated. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors, and covered defense information is subject to applicable DFARS provisions. Delivery is designated to Tinker AFB, Oklahoma, with primary point of contact provided for procurement inquiries.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

CARTRIDGE, RESPIRATO

Solicitation # SPE8E6-26-T-3961

This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.

Defense Logistics Agency

POSTED

about 12 hours ago

DEADLINE

SHAFT ASSEMBLY, MATC

Solicitation # SPE4A6-26-T-11LK

The contract pertains to the procurement of a single SHAFT ASSEMBLY, MATC with NSN 1650-01-047-1220, requiring delivery within 20 days of award. It is governed by a suite of stringent technical and quality protocols, including tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and mandates adherence to DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampled lots unless the contract states otherwise, and MIL-STD-105/ASQ Z1.4 may be used only for determining sample size, not acceptance criteria. All supplies must be free of government identification if not accepted, and the contract incorporates covered defense information requirements. The solicitation, issued under SPE4A6-26-T-11LK, targets NAICS code 336413 and is managed by the Department of Defense’s ASC Commodities Division, with inquiries directed to Jennifer Jacobs.

ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

MULTIPLEXER SUBASSE

Solicitation # SPE4A5-26-T-319Z

The contract pertains to the procurement of five units of a Multiplexer Subassembly, identified by part number 16E4004-809 and NSN 5895-01-426-4389, under solicitation SPE4A5-26-T-319Z. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Configuration control and engineering change management are enforced through RQ002 and RQ011, while physical identification of items must comply with RQ017. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001, with marking per MIL-STD-129 and no special markings required. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item has no shelf life restriction. Delivery is due in 411 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract requires strict adherence to quantity limits with no variance allowed. The prime contractor is Lockheed Martin Corporation, with other entities also listed as associated providers. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, under NAICS code 336413 for aerospace product and parts manufacturing.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

SHIELD, AIRCRAFT GRO

Solicitation # SPE8EF-26-Q-0158

The contract pertains to the procurement of 18 aircraft ground shields under NSN 1730-00-073-5654, with a delivery requirement of 60 days after award. It is issued under solicitation SPE8EF-26-Q-0158 as a total small business set-aside, with responses due by August 12, 2026. The solicitation incorporates technical and quality requirements from the DLA Master List, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location. Access to this controlled data is limited to contractors with approved U.S./Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal approval from DLA. Strict marking and identification protocols apply, including removal of government identification from non-accepted supplies and bare item marking. Packaging must meet DLA specifications, and all performance occurs within the United States under the Department of Defense. Point of contact for inquiries is Russell Keiser, reachable via the provided email and phone number.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 12 hours ago

DEADLINE

COVER, FUEL TANK

Solicitation # SPE4A5-26-T-319T

The contract pertains to the procurement of one fuel tank cover with part number 16B5504-809 and NSN 1560010522791 under solicitation SPE4A5-26-T-319T, issued by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 20 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the point of origin. Packaging must strictly comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking conforming to MIL-STD-129 and no special marking required. The contract incorporates DLA packaging requirements and mandates adherence to the DLA Master List of Technical and Quality Requirements identified by R or I numbers, with sampling procedures governed by MIL-STD-1916 or ASQ H1331, Table 1, using zero-defect acceptance unless otherwise specified. Attributes are assigned verification levels or AQLs based on criticality, and manufacturers may choose attribute or variable inspection under MIL-STD-1916. The supplier must also meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements. The item is procured as a single unit with no bidset available, and the contract enforces the removal of government identification from non-accepted supplies and requires physical identification of bare items.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

RETAINER, SPRING

Solicitation # SPE4A1-26-T-2511

The contract pertains to the procurement of four retainer springs with NSN 1650-01-046-2272 under solicitation SPE4A1-26-T-2511, with a delivery requirement of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Sampling is to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless directed otherwise. No data is currently available, and the alternate offeror must submit a complete data package including details for both the approved and alternate part. The solicitation is issued by the Department of Defense’s Aviation Supply Chain, with Allison Hugel as the primary point of contact, and responses are due by August 11, 2026.

AVIATION SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

SPIDER UNIT, ACTUATO

Solicitation # SPE4A7-26-T-607N

The contract pertains to the procurement of three Spider Unit Actuators under NSN 1650-00-740-1512, with a delivery requirement of 20 days after award. The solicitation number is SPE4A7-26-T-607N, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen listed as the primary point of contact. The offeror must comply with CMMC Level 2 Cybersecurity Self-Assessment requirements and provide complete data packages for both the approved part and any alternate part, with particular attention to physical identification and bare item marking standards. The response deadline is August 11, 2026, with the solicitation posted on August 3, 2026, and the NAICS code 336413 indicates the industrial classification covers aerospace product and parts manufacturing. The delivery place of performance and office address details are unspecified, but the contracting activity is based in the United States.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

SHAFT ASSEMBLY, OUTP

Solicitation # SPE4A1-26-Q-0099

The contract specifies the procurement of 662 units of a Shaft Assembly, Output, identified by NSN 2925-01-179-2648 and manufacturer part number 3501614-3 from Honeywell International Inc. The item is classified as a Commercial Item and a Critical Safety Item (CSI) with a critical application, requiring strict adherence to specified dimensional tolerances on the output shaft’s forward end design and torsion rod diameter. Quality assurance is governed by SAE AS9100 for both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin in accordance with MIL-STD-1916 or ASQ H1331, using zero-defect acceptance criteria unless otherwise stated. All items must be marked per MIL-STD-129 with lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers, and packaged in compliance with MIL-STD-2073-1E and DLA packaging requirements. The contract mandates compliance with DLA’s master list of technical and quality requirements, Cybersecurity Maturity Model Certification Level 2 self-assessment, and documentation for source approval, while explicitly stating that Item Unique Identification is not required per DFARS 252.211-7003. The procurement is under a Firm Fixed Price contract with no variance allowed in quantity, and delivery is due 247 days after the date of award. The delivery point is Origin, and the shipping destination is DLA Distribution Cherry Point, North Carolina. The item has no shelf life requirement and is subject to all applicable defense information and cybersecurity controls. The solicitation number is SPE4A1-26-Q-0099, posted on August 3, 2026, with responses due by August 10, 2026, issued by the Department of Defense’s Aviation Supply Chain under a federal acquisition framework. All waivers or deviations must be approved by the DSC Contracting Officer, and measuring and test equipment must meet specified standards. The unit of issue is each (EA), with pricing details to be filled in at award.

AVIATION SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-606U

This contract pertains to the procurement of two units of a commercial off-the-shelf (COTS) item identified by part number 600-00151 and NSN 1680-01-675-4175, supplied by SPECTRO SCIENTIFIC, INC. Delivery is required within 20 days of contract award, with FOB origin terms and zero tolerance for quantity variance. The item has a non-extendable shelf life of 15 months (Type I, Code J), and all packaging must comply with MIL-STD-2073-1E and DLA-specific packaging requirements, including marking per MIL-STD-129 with special code 32 indicating shelf-life status. Hazardous communication standards require approved Safety Data Sheets and OSHA-compliant labels, which must be reviewed by technical personnel and submitted to the DLA Aviation HMIRS office prior to award. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes must be verified at specified levels. Mercury or mercury compounds are strictly prohibited in preservation or packaging. The item must be shipped via traceable freight methods only, to the receiving officer at Naval Air Station Fallon, Nevada. The contract references technical and quality requirements from the DLA Master List and prohibits parcel post. The required delivery date is July 28, 2026, with the solicitation issued under SPE4A7-26-T-606U, and responses due by August 11, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Technical Data and Engineering SupportThis contract requires the provision of detailed engineering drawings, loft data, contour data, and comprehensive technical documentation to support manufacturing processes and the submission of a Supplemental Airworthiness Request. The work is classified as a subcontract under NAICS code 541330, indicating it pertains to engineering services, and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. All deliverables must meet precise technical standards to ensure regulatory compliance and seamless integration into production and certification workflows. The solicitation was posted on August 3, 2026, with a strict response deadline of August 11, 2026, at 4:59 AM, leaving a limited window for interested parties to submit proposals. Performance location details are not specified, suggesting the work may be conducted remotely or at the contractor’s facility, with deliverables transmitted electronically to the agency. The absence of set-aside information indicates the opportunity is open to all qualified contractors without preferential treatment based on business size or classification.

Engineering Services

POSTED

about 17 hours ago

DEADLINE

Quality Inspection and Non-Destructive Testing (NDT)The contract requires the performance of dimensional inspection, gaging, and non-destructive testing methods including X-ray, dye penetrant, and ultrasonic testing to ensure that components meet specified conformance standards. The work is classified under NAICS code 541380 and is structured as a subcontract under the Department of Defense, specifically managed by Ok DLA Aviation at Oklahoma City. The solicitation was posted on August 3, 2026, with a response deadline of August 11, 2026, at 4:59 a.m., leaving a limited window for potential vendors to submit proposals. No specific place of performance or set-aside designation is indicated, and details regarding point of contact or physical address are not provided in the solicitation data. The objective centers on verifying the integrity and accuracy of components through rigorous inspection and testing protocols critical to defense manufacturing compliance.

Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

Raw Material Supply (Metal Alloys or Forgings)The contract seeks the supply of certified alloy steel, aluminum, or titanium forgings to be used in the manufacturing of aerospace access components, targeting high-performance applications within the defense sector. The materials must meet strict quality and certification standards appropriate for aerospace use, ensuring structural integrity and compliance with industry specifications. The procurement is structured as a subcontract under NAICS code 331110, indicating a focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 3, 2026, with a firm response deadline of August 11, 2026, at 4:59 a.m. EST, leaving a limited window for qualified suppliers to submit proposals. There is no specified set-aside designation, meaning the opportunity is open to all eligible contractors regardless of size or certification status. The place of performance has not been detailed, suggesting delivery may be required to multiple or unspecified defense manufacturing sites under DoD oversight. Suppliers must be prepared to meet rigorous traceability, inspection, and documentation requirements for the certified metals to support aerospace certification and accountability processes.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 17 hours ago

DEADLINE

Heat Treating and Material ProcessingThis contract pertains to the application of advanced heat treating and material processing techniques including carburizing, nitriding, and hot isostatic pressing to improve the mechanical properties of components used in aerospace applications. The work is intended to enhance material strength, durability, and performance under extreme operational conditions typical in aviation and defense systems. The solicitation is categorized as a subcontract and falls under NAICS code 332813, specifically targeting industrial heat treating services aligned with defense manufacturing requirements. The opportunity was posted on August 3, 2026, with a strict response deadline of August 11, 2026, at 4:59 AM, indicating a compressed timeline for qualified vendors to submit proposals. The contracting activity is managed by the Department of Defense through the Ok DLA Aviation office located in Oklahoma City, with the place of performance not specified beyond the agency’s jurisdiction. All work must meet stringent aerospace standards as dictated by defense procurement protocols.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 17 hours ago

DEADLINE

Precision Machining of Access Hole FrameThe contract requires the manufacture of a precision-engineered metal alloy access hole frame designed to meet strict military specifications, with emphasis on tight dimensional tolerances and a high-standard surface finish. The component must be fabricated using materials and processes compliant with defense industry standards to ensure structural integrity and performance in demanding operational environments. The work is classified as a subcontract under NAICS code 332721, indicating specialized metal forging and stamping activities, and is issued by the Department of Defense through Ok DLA Aviation at Oklahoma City. Bidders must submit responses by August 11, 2026, at 4:59 AM, with no set-aside provisions specified for small or disadvantaged businesses. The place of performance and point of contact details are not provided, suggesting the location and direct liaison may be determined post-award or through direct communication with the contracting office. All proposals must demonstrate capability to deliver components that exceed standard industrial tolerances and adhere to unlisted military technical documents, requiring proven experience in defense-grade machining. The contract opportunity is accessible via the SAM.gov portal for qualified subcontractors seeking to participate in defense supply chain initiatives.

Precision Turned Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

Domestic Source Qualification & SAR Support ServicesThe contract is for Domestic Source Qualification & SAR Support Services, aimed at assisting suppliers in preparing and submitting Source Approval Request packages to qualify as approved sources for Air Force spare parts. This includes comprehensive support with SAR documentation requirements and submission through the DoD SAFE system, ensuring all procedural, technical, and regulatory standards are met for approval. The effort is critical to expanding the pool of qualified domestic suppliers capable of reliably supplying essential aerospace components to the Department of Defense. The opportunity is classified as a subcontract under NAICS code 541618 and is managed by the Department of Defense through the Ok DLA Aviation office based in Oklahoma City. While no solicitation number or set-aside details are provided, the response deadline is set for September 3, 2026, at 4:59 a.m. Eastern Time, and the posting date was August 3, 2026. The place of performance is unspecified, indicating flexibility, but the work must align with DoD aviation supply chain requirements in support of Air Force logistics. Participants must be prepared to navigate complex federal procurement protocols and demonstrate expertise in defense sourcing compliance.

Other Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

Technical Data & Reverse Engineering ServicesThe contract seeks technical data packages, engineering drawings, or reverse engineering services for a relay assembly to enable qualification and domestic production when no Engineering Data List is available. The work is critical for ensuring that the necessary technical documentation exists to support manufacturing within the United States, particularly in the absence of formal engineering records. Services must be delivered to meet qualification requirements and must produce accurate, usable technical data that can be integrated into production processes without reliance on existing documentation. This subcontract opportunity, classified under NAICS code 541330, is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation is open for responses until September 3, 2026, and requires contractors to possess the expertise to reverse engineer complex components and produce precise technical outputs. There is no set-aside specification, meaning all eligible entities may compete. The performance location is not specified, but the deliverables are essential for sustaining domestic production capabilities of mission-critical relay assemblies.

Engineering Services

POSTED

about 17 hours ago

DEADLINE

Clock, Panel_End_Item_Multi_NSN_6645000763050RK_PN_ABU11A

Solicitation # FD20302501835-02

The U.S. Air Force, through the 422nd Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources capable of manufacturing new spare parts for the Clock, Panel assembly identified by NSN 6645-00-076-3050RK and Part Number ABU11A. This effort is not a solicitation or a commitment to award a contract; no funds are available at this time, and the government is solely gathering information to evaluate the availability of capable vendors and assess whether the requirement can be competitively sourced or set aside for small businesses, including Small Disadvantaged Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses. The estimated quantity needed is 13 units, with no repair requirement, and the procurement is for new manufacture, which includes component sourcing, inspection, testing, packaging, shipping, and potential nonrecurring engineering costs. Interested parties must submit a Source Approval Request package via the DoD SAFE system to designated Air Force Sustainment Center contacts, following specific qualification requirements referenced through SAM.gov. Technical data may be limited, and vendors are expected to independently obtain necessary engineering information, including any required drawings, via the Tinker Engineering Public Sales Desk. Companies must provide detailed business information, including CAGE code, UEI, NAICS classification, and certifications, demonstrating their eligibility under the 1,250-employee size standard for NAICS code 336413. Responses are due by August 10, 2026, and must be submitted electronically; no oral submissions or direct inquiries to the originating office are permitted. All correspondence must be directed to the official workflow email provided, and participation in this market research effort requires selecting the “Add Me to Interested Vendors” option.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

RELAY ASSEMBLEY_5945-01-607-7229HY_L5503047-001_B-1

Solicitation # FD20302700058

The U.S. Air Force, through the 422nd SCMS Requirements Office at Tinker Air Force Base, is conducting market research to identify capable sources for the new manufacture of the Relay Assembly with NSN 5945-01-607-7229HY and P/N L5503047-001, intended for the B-1 platform. This effort is not a solicitation and no contract will be awarded based on responses; rather, the government seeks information to determine the optimal acquisition strategy, including whether the requirement can be competitively sourced or set aside for small businesses. Potential suppliers must demonstrate the ability to manufacture the item from raw components, perform inspection and testing, handle preservation and packaging, manage logistics and supply chain risks such as diminishing manufacturing sources, and address any nonrecurring engineering costs needed for qualification. The estimated requirement is for nine units. All interested parties, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, are encouraged to respond by selecting the “Add Me to Interested Vendors” option. Responses must be submitted via email to 422scms.workflow@us.af.mil by the deadline of September 3, 2026, Central Standard Time. The North American Industry Classification System code is 336413, with a size standard of 1,250 employees, and the federal stock class is 5945. No funds are currently available for this market research phase, and the government will use the gathered data solely to inform future procurement decisions, potentially fragmenting the requirement by airframe. The place of performance is Tinker Air Force Base, Oklahoma.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

VALVE, LINEAR, DIRECT_End_Item_F110_NSN_4810013260862PR_PN_1886-280

Solicitation # FD20302700080

The U.S. Air Force, through the 421st SCMS Requirements Office at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a linear direct valve, identified by part number 1886-280 and NSN 4810-01-326-0862PR, for use on the F110 platform. This is a Sources Sought notice under FAR Part 10, not a solicitation, and no contract award is anticipated based on this effort. The government seeks information from all potential suppliers, including small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, to evaluate the availability of capable vendors and determine whether the requirement can be awarded competitively or as a small business set-aside. Respondents must be able to manufacture the item from the ground up, including sourcing components, performing inspection and testing, packaging, shipping, and managing long-lead items and supply chain risks, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the federal stock class is 4810. The notice is open for responses until September 3, 2026, and submissions must be made through the “Add Me to Interested Vendors” button on the SAM.gov portal; responses sent via email or other means will not be considered. No funds are available for this market research initiative, and the government uses the information gathered solely to develop the best acquisition strategy for future procurement. The point of contact for inquiries is the 421st SCMS Supply Chain Management Squadron, reachable via workflow email at 421scms.requirements.workflow@us.af.mil. The place of performance is Tinker Air Force Base, Oklahoma, and all dates and times referenced are in Central Standard Time.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

CLAMP,COMBUSTION_End_Item_TF33_NSN_2840001690191RV_PN_622382

Solicitation # FD20302700088

The U.S. Air Force, through the 421st SCMS Requirements Office at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of the CLAMP, COMBUSTION part with NSN 2840-00-169-0191RV and P/N 622382, intended for use on the TF33 engine platform. This effort, identified under Notice ID FD2030-27-00088 and classified under NAICS code 336412, is a Sources Sought synopsis under FAR Part 10 and does not constitute a solicitation or a commitment to award a contract. The Government is seeking information from all potential suppliers, including small businesses, 8(a) firms, service-disabled veteran-owned businesses, HUBZone businesses, and women-owned small businesses, to assess market capability, determine if competition is feasible, and evaluate potential for a small business set-aside. The estimated requirement is 1,493 units, and potential contractors must be capable of full manufacturing, including component sourcing, inspection, testing, preservation, packaging, logistics, and managing supply chain challenges such as diminishing manufacturing sources and long-lead items. All responses must be submitted through the designated workflow email address, 421scms.requirements.workflow@us.af.mil, and interested vendors are required to select the “ADD ME TO INTERESTED VENDORS” button to participate. The deadline for responses is September 3, 2026, and performance, if a contract is later awarded, will be at Tinker AFB, Oklahoma. No funding is currently available, and the Government will use the gathered data solely to inform future acquisition strategy, including the possibility of breaking the requirement by airframe. Nonrecurring engineering costs associated with qualification as an approved source may be the responsibility of the supplier, and unit pricing will be established at the time of any eventual contract award. Responses are strictly for market research purposes and will not be treated as proposals or bids.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE

Frame, Access Hole _End_Item_B-2_NSN_1560014687510FW_PN_DAA3144A671-067

Solicitation # FD20302602419-SS

The U.S. Air Force, through the 424th Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research under FAR Part 10 to identify potential vendors for the new manufacture of a Frame, Access Hole component identified by NSN 1560-01-468-7510FW and Part Number DAA3144A671-067, intended for use on the B-2 platform. This action is not a solicitation, nor does it represent a commitment to award a contract or allocate funds; rather, it seeks to determine the availability of qualified sources to support future contracting decisions and assess the feasibility of a small business set-aside. Interested parties must respond by August 10, 2026, and are required to provide detailed business information including company structure, size status under NAICS code 336413, certification credentials such as 8(a), WOSB, SDVOSB, or HUBZone, unique entity ID, and ownership details. Vendors must be capable of end-to-end manufacturing including component procurement, inspection, testing, packaging, shipping, and managing supply chain risks like diminishing manufacturing sources and long-lead parts. Technical qualification requires submission of a Source Approval Request (SAR) package via DoD SAFE, following the Qualification Requirements referenced under MQR-PSD-1, and adherence to an Engineering Data List that may require separate requests via a standardized form to the Tinker Engineering Public Sales Desk. Responses must be submitted electronically to designated Air Force emails, and no inquiries should be directed to the originating office. The requirement calls for one unit in the initial estimated quantity, with no repair component involved. All technical data is either provided or must be independently acquired by the vendor, and nonrecurring engineering costs may be incurred to qualify as an approved supplier.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 17 hours ago

DEADLINE