Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Removal and Replacement of Wood Baffles

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the complete removal and installation of wood acoustic baffles at Building 1024 located at Tinker Air Force Base, encompassing all associated labor, specialized equipment, transportation, and rigorous quality control measures required within a Department of Defense facility. The work must be executed in compliance with stringent military standards and environmental protocols appropriate for an active defense installation. All tasks are to be performed by a small business as this is a Total Small Business Set-Aside under FAR 19.5, exclusively reserved for small business concerns. The NAICS code 238990 classifies the work under other specialty trade contractors, reflecting the specialized nature of acoustic system installation and renovation. The solicitation was posted on July 23, 2026, with a firm response deadline of August 14, 2026, at 7:00 p.m. The place of performance is specified as Coffeyville, Oklahoma, with a ZIP code of 73145, and the contracting office is identified as FA8137 AFSC PZIOC under the broader Department of Defense. The contract is structured as a subcontract, indicating it is likely part of a larger project managed by a prime contractor. All work must be completed with full attention to safety, security, and operational continuity within the sensitive military environment, and the selected vendor must demonstrate proven capability in delivering similar services in DoD facilities.

General Info

Small business to remove and install wood acoustic baffles at Tinker AFB under DoD standards, Deadline August 14, 2026.

Agency

Department Of Defense → FA8137 Afsc PziocView Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8137 Afsc Pzioc
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA8137 Afsc Pzioc
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Complete removal and installation of wood acoustic baffles at Building 1024, Tinker AFB, including labor, equipment, transportation, and quality control in a DoD facility environment.

Similar Contracts

Same NAICS industry code

NAICS: 238990
New
SLED
MBE/WBE-Certified Fencing Subcontractor (Strategic Partner)A MBE/WBE-certified firm is being sought to serve as a strategic subcontractor to perform fencing work or supply fencing materials in support of a prime contractor’s obligation to meet a 15% MBE/WBE participation requirement under the Rhode Island MPA. This subcontract is tied to state-funded infrastructure projects where the prime contractor must demonstrate compliance with minority and women-owned business engagement targets, and the selected firm will play a critical role in fulfilling that commitment. The work must adhere to applicable state standards and timelines, with performance expected to align with the broader project schedule governed by the Rhode Island Department of Transportation or related agency. The opportunity remains open for proposals until May 1, 2031, and is classified under NAICS code 238990 for other specialty trade contractors. The subcontract is not a direct state contract but a downstream obligation tied to state infrastructure initiatives, and all interested firms must be certified as MBE or WBE by designated state or federal agencies. The firm must be prepared to provide materials and labor or a combination of both, depending on project needs, while ensuring full compliance with reporting, documentation and certification requirements set forth by Rhode Island’s public procurement protocols. Participation will be evaluated based on capability, certification status, and alignment with the prime contractor’s compliance goals.
State of Rhode Island

POSTED

about 16 hours ago

DEADLINE

in almost 5 years
View Details

More opportunities from Department Of Defense → FA8137 Afsc Pzioc

Same awarding agency

NAICS: 237310
New
Federal
WWYK150185 - REPAIR ROADWAYS, PARKING AT MUNITIONS AREA & WWYK190230 - REPAIR ARNOLD AVE BETWEEN H AVE AND M AVEThis contract, solicitation number FA813726R0027, is a combined award for two distinct construction projects at Tinker Air Force Base, Oklahoma: WWYK150185 for the repair of roadways and parking lots near Buildings B3812 and B3804 including entrance expansion, and WWYK190230 for full-depth pavement replacement and mill-and-overlay of Arnold Avenue between H Avenue and M Avenue. The solicitation is restricted to Women-Owned Small Businesses (WOSB) under NAICS code 237310 and contemplates award of a Firm Fixed Price contract under the Lowest Price Technically Acceptable (LPTA) evaluation method. Proposals must demonstrate technical acceptability by satisfying all pass/fail Gates, including a low-risk approach, full compliance with the Statement of Work, and detailed methodologies showing how the contractor will meet capability, management, and scheduling subfactors such as on-site sole-source design and construction leadership, adherence to the mandatory 250-calendar-day performance period, and compliance with specific delivery schedule milestones including submittal reviews, airfield waivers, and outage requests. All proposals must include a detailed Electronic Cost Model Breakdown in an unlocked Microsoft Excel format with pricing segregated by CSI division or salient work features for each project individually, and must be submitted via email or a DoD SAFE link to the designated contracting points of contact by the revised deadline of August 6, 2026 at 2:00 PM CST. Attendance at the mandatory site visit on June 18, 2026, is required for eligibility, and all personnel without base access must arrange for badging through the designated point of contacts using a REAL ID-compliant credential. Contractors must comply with extensive administrative, safety, and security protocols including submission of performance and payment bonds, adherence to the Real ID Act, display of contractor badges on-site, and the establishment of a comprehensive Quality Control Plan with weekly reporting of inspections and corrective actions. Invoicing must be processed through Wide Area Workflow (WAWF), and all contract documents requiring signature must be submitted with electronic digital signatures in PDF format. Failure to meet any technical subfactor, submit required documentation, or comply with procedural requirements such as the mandatory site visit or cost model format may result in disqualification. The contract includes a liquidated damages clause of $237.96 per calendar day of delay, requires a minimum 1
Highway, Street, and Bridge Construction

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 237110
New
Federal
TAFB MACC-BOA | Formal RFP for WWYK240146 - Design & Implement Monitoring & Control System for IWCS, Bldg. 62516This solicitation, identified as FA813726R0039 for Project WWYK240146, is a Firm Fixed Price Request for Proposal exclusively open to current MACC-BOA holders for the design and implementation of a Monitoring & Control System for IWCS at Building 62516 on Tinker Air Force Base, Oklahoma. The contractor is responsible for furnishing all materials, labor, equipment, tools, transportation, testing, quality control, and incidentals required to complete the system, including site investigation to verify existing conditions and field-verify all government-provided data—such as floor plans, structural, mechanical, and electrical layouts, and underground utility locations—which are explicitly labeled as approximate. Any assemblies, frameworks, fixtures, or apparatus not clearly detailed in drawings or the Statement of Work must be identified and provided by the contractor to ensure a fully functional and operational system. Performance includes work in flight lines, hangars, and other restricted aircraft maintenance areas, mandating FOD awareness training per Tinker AFBI 21-100 for all personnel. Site visit attendance is mandatory for eligibility to submit a proposal, with RSVPs, including full Entry Authorization List (EAL) details for all attendees, due by May 22, 2026, and the site visit itself is scheduled for June 1, 2026. RFIs arising from the site visit are due by June 5, 2026, and all responses have been compiled and made available to respondents. Proposals are due by July 27, 2026, under a Lowest Priced Technically Acceptable selection process, requiring each submission to fully conform to the Instructions to Offerors, including a Technical Volume with a detailed Project Narrative and a fully supported Price Volume structured according to the CLIN format, with design pricing broken out by labor category, hours, and rates to comply with DFARS 236.606-70. All proposals must be submitted via email without password protection or compression and must include a signed Model Order. The solicitation includes a Total Small Business Set-Aside under NAICS code 237110 and is governed by a suite of FAR and DFARS clauses, including mandatory bid guarantees, performance and payment bonds, and rigorous technical acceptability gates where any single deficiency in a technical subfactor renders a proposal unawardable. Contractors must comply with all cybersecurity and security protocols,
Water and Sewer Line and Related Structures Construction

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 237990
New
Federal
WWYK250096 - Repair Stormwater Spill Gate 11 StructureThe solicitation FA813726R0032 for the Repair Stormwater Spill Gate 11 Structure at Tinker Air Force Base is a Women-Owned Small Business (WOSB) sole-source procurement under NAICS code 237990, requiring full-service construction capabilities to restore the concrete spill gate structure and reestablish stormwater flow via Soldier Creek outside the base perimeter. All proposers must attend a mandatory site visit and provide an Entry Access List if personnel require base entry, with proposals due no later than 2:00 PM CST on August 10, 2026. The contract follows a Lowest Price Technically Acceptable (LPTA) evaluation methodology, wherein proposals must be rated acceptable across all technical subfactors—capability and management, and schedule and planning—before cost is considered, and only the lowest-priced technically acceptable offer from at least two qualified respondents will be selected. Contractors must submit a detailed electronic cost model in unlocked Excel format, adhering to RS MEANS Facilities Construction Cost Book pricing for standard items, with local adjustments using Oklahoma City’s weighted cost index and verified vendor quotes for non-pre-priced items; pricing must be broken down by CSI division or salient work features, and cost loading must total 100 percent of the contract value with at least 10 percent retained until closeout. All work must comply with Tinker AFB-specific facility standards, UFC 1-200-02, applicable federal and state codes, and stringent safety requirements including Title 29 CFR Parts 1910 and 1926 and the USACE EM 385-1-1 manual. Technical submissions require a comprehensive narrative, team list, management structure, schedule with milestones for staging, airfield waivers, and outage requests, as well as full adherence to the Statement of Work and attached drawings, submittal register, RMDF, and wage determination. As-built drawings, record drawings, and ongoing quality control documentation with weekly inspection reports are mandatory, and all submissions must use digital signatures and follow prescribed electronic communication protocols. The contractor must maintain active SAM registration, represent size and socioeconomic status accurately, comply with Buy American requirements and subcontracting limitations, furnish required performance and payment bonds, and ensure all personnel have appropriate credentials and training, particularly for hazardous systems requiring NICET certification or OCC licensing. Performance must begin within 10 days of the Notice to Proceed and be completed within 270 calendar days
Other Heavy and Civil Engineering Construction

POSTED

2 days ago

DEADLINE

in 16 days
View Details
NAICS: 236220
New
Federal
Tinker AFB MAC BOA - WWYK240176 - Replace Industrial Waste Lift Stations 6N & 6S, B62501This solicitation is exclusively for Tinker Air Force Base MAC BOA holders and pertains to the complete replacement of Industrial Waste Lift Stations 6N and 6S at Building B62501 on Tinker AFB, Oklahoma. The project requires the contractor to provide full design and engineering services, along with all materials, labor, equipment, testing, quality control, and incidentals needed to demolish and install new lift stations while evaluating the feasibility of consolidating the two units into a single system and reusing or rehabilitating existing wet well structures with coating or liner systems. A mandatory site visit conducted on July 21, 2026, is a condition for eligibility to submit a proposal, and attendance was confirmed through a pre-solicitation RSVP process that required base access clearance details via an Entry Access List. All RFI submissions must be directed to SSgt Isaac Demmers by July 27, 2026, at 1400, and the final proposal deadline is August 31, 2026. The work must comply with Tinker AFB’s 2025 Electrical, Mechanical, and Fire Protection Standards, as well as applicable military and OSHA regulations, including adherence to MIL-STD-129R and MIL-STD-130N for marking and labeling, and AFI 90-821 and OSHA 1910.1200 for hazardous material handling. Contractors must follow the base’s safety protocols under EM 385-1-1, ensure key personnel are OSHA 30-Hour certified, enforce a drug-free workplace, and coordinate safety with subcontractors. Proposals must be submitted electronically via DoD SAFE using a strict naming convention, and all submissions must include design documentation, as-built records, and verification of compliance with base-specific technical criteria. The contracting office is FA8137 AFSC PZIOC, with primary contact Isaac Demmers and secondary support from Tamra Torres; the COR is Randall Floyd, though no contract type, estimated value, or award methodology is disclosed.
Commercial and Institutional Building Construction

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 236220
New
Federal
WWYK250063 - INSTALL REACT VII FACILITY, B9001, POST V19This solicitation for the installation of the React VII Facility at Building 9001 on Tinker Air Force Base is restricted exclusively to SBA-certified Women-Owned Small Businesses (WOSB) under NAICS code 236220 and is awarded on a Lowest Price Technically Acceptable (LPTA) basis. The project requires a sole-source responsibility for both design and construction, with performance to be completed within 240 calendar days after notice to proceed, beginning no later than 10 days after receipt of that notice. All proposals must demonstrate technical acceptability through a detailed work plan that addresses the Statement of Work, specifications, and mandatory compliance with Tinker AFB facility standards, environmental regulations, and security protocols. Offerors must submit a technical proposal including a project narrative and an electronic, unlocked cost model breakdown by CSI division or salient work features, alongside required certifications such as SSPC QP 8 and QS 1 for coating contractors and ICRI Tier 2 for concrete repair technicians. A mandatory site visit at the Northwest Parking Lot of Building 9001 on July 20, 2026, was required for eligibility, with attendance verified via signed sign-in sheets and follow-up visits offered due to RSVP issues. The contract imposes stringent compliance, administrative, and operational conditions: materials must be delivered in original manufacturer packaging, labeled per MIL-STD-129 and MIL-STD-130, and protected from environmental contaminants; all work must adhere to the National Electrical Code, NFPA 70E, and specific Tinker AFB standards for lead-based paint, PCB waste, and hazardous materials. Liquidated damages are set at $330.42 per calendar day of delay, and payment requests must be submitted through the Wide Area Workflow system with full SAM and WAWF registration. Security requirements include appointing a designated security representative, completing controlled area training, and adhering to strict entrance procedures. Bonding is mandatory, and all personnel must be physically present on-site during specialized work. Final acceptance requires the presence of the contractor’s superintendent and quality control personnel, the Contracting Officer’s Representative, and government representatives, with as-built drawings and O&M manuals due within two weeks after final testing. Proposals lacking complete technical submissions, failing to meet SAM Representations and Certifications, or missing mandatory elements will be deemed unacceptable and ineligible for award.
Commercial and Institutional Building Construction

POSTED

2 days ago

DEADLINE

in about 1 month
View Details