Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Solicitation opportunity from Government of Canada was posted on March 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Renovations to Government of Canada Building in Gander, NL

Closed
M1000-6-4853International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 236220
New
SLED
Checkpoint Security Grill Replacement - DBBThe contract seeks a contractor to deliver comprehensive design, permitting, and construction services for replacing the Checkpoint 5 security grill at the Port of Seattle. The scope encompasses a full lifecycle approach beginning with site assessment and continuing through the preparation of design drawings and specifications that comply with TSA CRPG Section 3-5 standards. The contractor must submit all documentation for regulatory review and secure necessary permits, followed by the safe removal and proper disposal of the existing grill. New system fabrication and installation are required, with seamless integration into existing structural, electrical, and security badge access systems. All work must be conducted with strict attention to operational continuity, minimizing disruption to airport security functions. Coordination with multiple stakeholders is mandatory to ensure compliance with federal, state, and local regulations while maintaining the integrity of the airport’s security posture. The procurement is classified under NAICS code 236220 for commercial and institutional building construction and is managed by the Aviation Project Management Group under the Port of Seattle. Primary contact for inquiries is Yanet Maldonado, with Collette Deardorff serving as the project manager. The opportunity was posted on July 26, 2026, and the contract is structured under a design-bid-build delivery method. All work must be performed at the port’s facility, with no specified set-aside provisions. Contractors are expected to engage proactively with project representatives to align on timeline, quality, and compliance requirements throughout all phases of the project.
Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

N/A
NAICS: 236220
New
SLED
Rental Car Facility (RCF) Customer Service Building (CSB) Re-DemisingThe Port of Seattle’s Aviation Project Management Group is preparing to revise the base building infrastructure of the Rental Car Facility Customer Service Building to support a new Concession Agreement and enable tenant construction commencing June 1, 2027. The scope includes updating wayfinding signage to reflect new tenant locations, constructing a new break room and flex space for transit operations, renovating existing restrooms in the Customer Service Building, replacing outdated car wash equipment in the Quick Turn Around areas, installing new expansion joints on the 5th Floor plaza areas, and performing structural repairs to address cracking and repair post-tensioned cables. These upgrades are designed to modernize facility functionality and ensure compliance with future operational demands under the upcoming concession arrangement. All work is centered on the Customer Service Building within the Rental Car Facility, with the Port of Seattle acting as the contracting authority. The solicitation is currently forecasted, with no formal solicitation number assigned yet, and the NAICS code 236220 indicates commercial and institutional building construction. Primary point of contact is Angela Peterson, with Julia Ruzon serving as Project Manager. Interested parties should monitor the official Port of Seattle portal for formal solicitation release, as this project represents a significant capital improvement initiative aimed at enhancing tenant experience and long-term facility integrity.
Aviation Project Management Group

POSTED

about 6 hours ago

DEADLINE

N/A
NAICS: 236220
New
Federal
RFQ 19KU2026Q0013 - AEWA Door & Tile Installation Upgrade projectThe RFQ 19KU2026Q0013 seeks qualified contractors to perform the AEWA Door & Tile Installation Upgrade project at the U.S. Embassy in Kuwait under a fixed-price contract award, with selection based on the lowest technically acceptable bid. A mandatory site visit is scheduled for August 5, 2026, at 09:30 AM Kuwait time, and failure to conduct a thorough on-site assessment prior to submission renders the contractor fully responsible for any errors, omissions, or cost miscalculations in the proposal, including the Bill of Materials and Bill of Quantities. All quotations must be submitted electronically by August 16, 2026, at 10:00 AM Kuwait local time, with emails titled correctly to ensure proper processing. Proposals must include the completed SF-1442 form, pricing in Section A, all required representations and certifications in Section L, and supporting documentation from Attachment A and other applicable sections. Offerors must either hold an active SAM registration and provide their Unique Entity Identifier or, if not registered, complete FAR 52.204-90, with the requirement to update this annually if option periods are exercised. Questions must be submitted by August 8, 2026, at 10:00 AM Kuwait time; no inquiries will be accepted after this deadline. The project falls under NAICS code 236220 and is administered by the U.S. Department of State through the Embassy in Kuwait, with no set-aside provisions applied.
US Embassy Kuwait

POSTED

about 12 hours ago

DEADLINE

in 20 days
NAICS: 236220
New
Federal
Z2DA--FY27 NRM | 557-23-104 | Replace Boiler Plant Steam Boilers | Construction (VA-27-00003633)The Department of Veterans Affairs, through Network Contracting Office 07, is conducting market research for the replacement of three steam boilers at Building 27 of the Carl Vinson VA Medical Center in Dublin, Georgia. This project, classified under NAICS code 236220 with a magnitude between $20 million and $50 million, will require a contractor to manage and execute the full scope of construction work including hazardous material abatement, demolition of existing systems, installation of new boilers, piping, fuel tanks, emergency generators, and related site work—all in accordance with design drawings and specifications provided by an independent Architect-Engineer. The work must comply with all federal, state, and local regulations, and wage determinations for Laurens County, Georgia will apply. The project is anticipated to be awarded as a firm-fixed-price contract following a competitive process, either through an RFP under FAR Part 15 or an IFB under FAR Part 14, with the final procurement method to be determined after market research. The performance period is set at 730 days from the Notice to Proceed, and the contract is planned to be set aside exclusively for Service-Disabled Veteran Owned Small Businesses. Interested contractors must submit a capabilities statement no longer than four single-spaced pages in a single PDF under 4MB, including company details, UEI, size certification under NAICS 236220, bonding capacity sufficient for the project value, and evidence of past performance on at least three comparable medical facility construction projects completed within the last seven years. Submissions must include specific project names, owners, contact information, dollar values, start and completion dates, and a description of technical expertise and key personnel relevant to the scope. Responses must be emailed as a properly formatted PDF by August 7, 2026, at 3:00 PM EST to the designated VA contacts with the correct subject line reference. No bids or proposals are being solicited at this time; this is purely a market research effort, and respondents should not expect evaluation feedback, reimbursement, or a solicitation unless posted on SAM.gov in the first quarter of FY27. Hard copies and phone inquiries are not accepted, and compliance with submission guidelines is mandatory for consideration.
247-NETWORK Contract Office 7 (36C247)

POSTED

1 day ago

DEADLINE

in 12 days

General Info

Agency

Government of Canada → Royal Canadian Mounted PoliceView Agency

NAICS

236220 - Commercial and Institutional Building ConstructionView NAICS

Place of Performance

Newfoundland and Labrador, CAN

Set-Aside

NONE

Documents

(4)

Invitation to Tender M1000-6-4853 Renovations to Government of Canada Building in Gander, NL

PDF51 pagesitb

Solicitation Amendment M1000-6-4853 Renovations to Government of Canada Building in Gander, NL

PDF2 pagesamendment

Invitation to Tender M1000-6-4853 Renovations Government Building Gander

PDF57 pagesitb

Solicitation Amendment M1000-6-4853 MOD 001 - Renovations in a Government of Canada Building in Gander

PDF2 pagesamendment

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Solicitation

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Royal Canadian Mounted Police
Contacts1 person available
OfficeN/A
Organization / Agency
Government of Canada → Royal Canadian Mounted Police
View Agency Profile
Office AddressN/A
Contacts
Sandra BremnerContracting Authority

Full Description

Show more
The Royal Canadian Mounted Police (RCMP) intends to retain a Contractor to provide construction services for interior renovations to a Government of Canada building located in Gander, NL. The Contractor must complete the Work within 10 months from the date of contract award. This is a two-phase selection process. Bidders responding to this Invitation to Tender are to submit a bid in two phases. Please see attached Invitation to Tender document for details. Policy on Reciprocal Procurement: This solicitation of bids is open only to Canadian suppliers The successful Bidder's personnel, as well as any subcontractor and its personnel, who are required to perform any part of the Work pursuant to the subsequent contract must meet the mandatory security requirements as indicated in the attached Invitation to Tender document. There will be a Phase Two site visit. The date, time and location for the Phase Two site visit will be identified during Phase Two. Basis of selection: Phase One Qualifications – will be opened privately. Requirements will be evaluated on a pass or fail basis. Failure to meet any or all of the Phase One mandatory requirement(s) will render the Phase One bid non-responsive and no further consideration will be given to the Phase One bid. The responsive Phase One Bidders will be advised of their competitive standing, sent the Phase Two documentation, and have the opportunity to decide whether or not to continue their participation by submitting a Phase Two bid. Phase Two Price - Submittals will be evaluated against the Phase Two mandatory requirements. Failure to comply with any or all of the Phase Two mandatory requirement(s) will render the Phase Two bid non-responsive and no further consideration will be given to the Phase Two bid. The responsive Phase Two bid with the lowest price will be recommended for contract award. Tenders must be submitted by email to: atl_bid_receiving@rcmp-grc.gc.ca Refer to the attached tender documents to obtain further information. Canada retains the right to negotiate with any supplier on any procurement. Documents may be submitted in either official language of Canada. Canada will make available Notices of Proposed Procurement (NPP), bid solicitations and related documents for download through the Government Electronic Tendering Service (GETS) at https://canadabuys.canada.ca/en/tender-opportunities . Canada is not responsible and will not assume any liabilities whatsoever for the information found on websites of third parties. In the event an NPP, bid solicitation or related documentation would be amended, Canada will not be sending notifications. Canada will post all amendments, including significant enquiries received and their replies, using GETS. It is the sole responsibility of the Bidder to regularly consult GETS for the most up-to-date information. Canada will not be liable for any oversight on the Bidder's part nor for notification services offered by a third party. The RCMP has adopted the Ineligibility and Suspension Policy administered by Public Services and Procurement Canada. As a result, the supplier integrity and compliance provisions are being applied in RCMP contracting activities as outlined in this solicitation. Indigenous Procurement: The federal Indigenous Business Directory (IBD) is an online resource for all levels of government and the private sector to identify Indigenous business capacity. Having a business profile in the IBD will increase your company’s visibility and may provide additional business. A profile in the IBD can also allow you to compete for federal government contracts that are set-aside for Indigenous businesses through the Procurement Strategy for Indigenous Businesses. For more information and to review eligibility criteria and register, visit: www.canada.ca/indigenousbusinessdirectory.

More opportunities from Government of Canada → Royal Canadian Mounted Police

Same awarding agency

NAICS: 339910
New
International
Design, Production and Supply of Royal Canadian Mounted Police Challenge CoinsThe Royal Canadian Mounted Police (RCMP) is seeking to establish up to two Regional Individual Standing Offers for the design, production, and supply of customized challenge coins to recognize personnel, policing partners, and civilians who support Federal Policing operations. The standing offer period is one year with an option to extend for two additional one-year periods, and all deliveries must be completed within 45 calendar days of a call-up issuance. Only Canadian suppliers or suppliers from applicable trading partners are eligible to respond, and proposals must be submitted electronically by the stated deadline to the designated RCMP bid email address. Offers are evaluated solely on the lowest price among compliant submissions, with mandatory pass/fail criteria requiring at least two documented projects within the last two years involving custom challenge coin production of 100 or more units per order, and a verifiable quality control process that includes inspection procedures and a commitment to replace defective coins at no cost. All coins must adhere to strict physical specifications, including a circular format, RCMP crest on the reverse that cannot be altered, specific diameter and weight thresholds for small (42–46mm, minimum 35g) and large (47–51mm, minimum 46g) sizes, and must be supplied with a transparent acrylic sleeve. Enamel work must be evenly filled with no bleeding, plating must be free of peeling or bubbling, and edges must be smooth and consistent. The RCMP retains full ownership of all designs, source files, and intellectual property, and the contractor is prohibited from reproducing or reselling the coins without explicit authorization. All packaging must conform to the Government of Canada’s Green Procurement Policy, requiring materials to be reusable, returnable, or recyclable, with contractors responsible for ensuring local recycling access at delivery locations and confirming recyclability or reusability with the contracting authority. Coins must be delivered DDP Sunderland, B.C. under Incoterms 2020, with pricing structured in tiers based on quantity ordered—50–200, 201–350, and 351+ units—for both small and large sizes, with additional cost options for petal edge, diamond edge, bronze or copper plating, hard enamel, 3D designs, and design hours. Invoices must use firm unit prices in Canadian dollars, include separate line items for each pricing component, and be submitted electronically to both the Technical and Contracting Authorities. Contractors must certify compliance with the Ineligibility and Suspension Policy, confirm they
Jewelry and Silverware Manufacturing

POSTED

2 days ago

DEADLINE

in 11 days
View Details
NAICS: 517111
New
International
Cable Television services for RCMP in St. John’s NLThe Royal Canadian Mounted Police is seeking cable television services for seventy outlets at its B Division Headquarters located at 100 East White Hills Road in St. John’s, Newfoundland and Labrador, under a five-year contract term. This solicitation, identified by number 202700376, is open exclusively to Canadian suppliers and suppliers from applicable trading partners, and requires bids to be submitted electronically in three separate PDF sections—technical, financial, and certifications—with a total email size not exceeding five megabytes. Zip files and web links are prohibited, and all documentation must be submitted to ATL_Bid_Receiving@rcmp-grc.gc.ca by the deadline of August 25, 2026. The work involves supplying, installing, configuring, testing, and activating equipment for all 70 cable outlets, including set-top boxes, remote controls, cabling, and connectors, while ensuring compatibility with standard commercial televisions and supporting closed captioning without requiring individual consumer accounts. Services must include 24/7 remote technical support via phone or online, with on-site response within two business days if remote resolution fails. All equipment and services must be fully operational by September 1, 2026, and maintained through August 31, 2031. Bidders must meet mandatory technical criteria, including proof of delivery via cable, fiber, or satellite, and provide certifications regarding independent bid determination, integrity, eligibility, and compliance with Canadian procurement rules. The contract mandates adherence to Annex A (Statement of Work), Annex C (Security Requirements Checklist and Guide), and Annex D (Non-Disclosure Agreement), with security clearances required for personnel accessing sensitive areas or information. The contractor must submit invoices monthly in accordance with the Basis of Payment annex, including separate line items for each payment component, with payment contingent upon verified delivery, acceptance by the Technical Authority, and full compliance with contract terms. No insurance is specifically required, but the contractor bears full responsibility for all travel and installation costs. Only the lowest-priced responsive bid that satisfies all mandatory technical requirements will be recommended for award, with no negotiation beyond price unless authorized by the Contracting Authority, Rosalee Parsons. The agreement is governed under the Standard Acquisition Clauses and Conditions Manual, the General Conditions for Services (Medium Complexity), and the Integrity Regime administered by Public Services and Procurement Canada. Bidders must also provide their Procurement Business Number and are encouraged to register in the Indigenous Business Directory to access potential set-aside opportunities.
Wired Telecommunications Carriers

POSTED

3 days ago

DEADLINE

in 30 days
View Details
NAICS: 238220
New
International
Metering Project – Government of Canada Buildings – Regina, SaskatchewanThis contract pertains to Phase One of a two-phase procurement initiative by the Royal Canadian Mounted Police on behalf of the Government of Canada for the installation of steam, water, and electric meters in various government buildings located in Regina, Saskatchewan. The work encompasses all labor, materials, and shipping necessary to complete the installations in strict accordance with the specified technical drawings and documentation. Only Canadian contractors are eligible to participate, with bids from non-Canadian entities automatically rejected under the Policy on Reciprocal Procurement. Bidders must first meet mandatory qualification requirements outlined in the Request for Qualifications to proceed to Phase Two, where financial proposals will be solicited. Pre-qualified bidders remain eligible for 60 days from notification of qualification or contract award, whichever occurs first. The contract award will be granted to the lowest-priced compliant bid, following a Lowest-Priced Technically Acceptable selection process. All submissions must be sent via email to a designated government address, and bidders are solely responsible for monitoring the Government Electronic Tendering Service for any amendments or updates, as no notifications will be issued. Bids may be submitted in either English or French, Canada’s official languages. The contract imposes stringent insurance requirements, mandating coverage such as Commercial General Liability with limits of at least $5 million per occurrence and $10 million aggregate, Builder’s Risk insurance aligned with IBC Forms 4042 and 4047, Pollution Liability of $1 million per incident, Marine Liability with P&I coverage and waiver of subrogation, and Aviation Liability of $5 million per incident. Canada must be named as an additional insured with a waiver of subrogation and a minimum 30-day notice of cancellation clause. The project is subject to the Ineligibility and Suspension Policy administered by Public Services and Procurement Canada, which enforces supplier integrity and compliance standards. While no specific contract value, delivery schedule, or FOB terms are provided, performance is confined to Regina, Saskatchewan, and acceptance inspections will occur at the place of work. Bidders are encouraged to register in the Indigenous Business Directory to access potential set-aside opportunities under the Procurement Strategy for Indigenous Businesses. No unique entity identifier, size status, or socioeconomic certifications are required for submission, and no key personnel or organizational conflict of interest provisions are explicitly detailed.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

4 days ago

DEADLINE

in 11 days
View Details