Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RING, TURBINE STATOR

Active
SPE4A1-26-Q-0112Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 87 units of a turbine stator ring identified by NSN 2840-01-487-5388 and part number 5078T15G01 from General Electric Company, issued under solicitation SPE4A1-26-Q-0112 with a firm delivery deadline of 240 days after award. All items must comply with DLA’s packaging requirements labeled RP001 and be packed per MIL-STD-2073-1E using prescribed methods including preservation method 41, wrap material 00, and unit container E5, with marking strictly following MIL-STD-129 without special markings. Sampling for inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification level VII with an AQL of 0.1. The item is designated as a critical application, and any configuration changes require an engineering change proposal. The contract enforces CMMC Level 2 self-assessment for cybersecurity compliance and mandates removal of government identification from non-accepted supplies. Delivery is FOB origin to DLA Distribution in San Diego, with inspection and acceptance occurring at destination. The unit of issue is each, with no tolerance for quantity variance, and transportation aligns with DLA procedural notes C19 and C20. The solicitation was posted on August 5, 2026, with responses due the following day, and the material is needed for delivery by March 14, 2026, under a federal procurement administered by the Department of Defense’s Aviation Supply Chain.

General Info

Procure 87 turbine stator rings by March 14, 2026, per strict military packaging and inspection standards.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A1-26-Q-0112.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → AVIATION SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Angelina Dunlap
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL RING,LABYRINTH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
-
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
CRITICAL APPLICATION ITEM
GENERAL ELECTRIC COMPANY 99207 P/N 5078T15G01
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A1-26-Q-0112
SECTION B
SUPPLY/SERVICE: 2840-01-487-5388 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 2840-01-487-5388 87.000 EA $ _______________ $ ______________ RING,TURBINE STATOR
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 240 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C UNIT CONT:E5 OPI:M INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO 3581 CUMMINGS ROAD BLDG 3581 SAN DIEGO CA 92136-3581 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO 3581 CUMMINGS ROAD BLDG 3581 SAN DIEGO CA 92136-3581 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7014487454 0001 N/A N/A N/A 03/14/2026

SPE4A1-26-Q-0112 NSN/Part Number: 2840-01-487-5388 Quantity: 87 EA Purchase Request: 7014487454QTY: 87 Delivery: 240 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
PARTS KIT, PUMP OVER
Solicitation # SPE4A7-26-T-617Z
This contract specifies the procurement of a parts kit for pump overhaul with fuel control, identified by NSN 2915-00-939-9536 and part number 60-371B901A from Hydro-Aire Aerospace Corp. The requirement is for exactly ten units with no variance allowed, to be delivered FOB origin within 117 days, with a required ship date of December 9, 2026 and an original delivery deadline of September 23, 2027. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific mandates such as the inclusion of two retaining rings MS16627-1112 per kit, a correction to a recurring supplier error. Inspection and acceptance occur at origin using zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical attributes requiring a 0.1 AQL. The supplier must also meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and adhere to standardized packaging per MIL-STD-129 and ASTM D3951, with palletization following DLA packaging guidelines. The technical data package is proprietary or insufficient for competitive procurement, classifying the item as critical with no approved specification, and all documentation must satisfy source approval requirements including SAR submission. The delivery destination is the DLA Distribution Depot Oklahoma at Tinker Air Force Base, with transportation governed by DLAD procedural notes. The contract enforces strict labeling, identification, and marking compliance including removal of government identification from non-accepted supplies, and all measuring and test equipment must be calibrated and documented. The unit of issue is each, priced at $10.00 for a total value of $100.00, and the solicitation was issued under contract number SPE4A7-26-T-617Z with a response deadline in August 2026. The purchaser is the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with Aaron Miles designated as the primary point of contact. The contract supersedes any conflicting standards, and all requirements, including those marked with R or I numbers, are binding and must be traced to the current DLA Master List revision effective on the solicitation issue date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
COVER, SUPPORT ASSEM
Solicitation # SPE8EF-26-Q-0168
The contract specifies the procurement of 25 units of a cover support assembly with dimensions of 9.60 inches in length and 7.20 inches in width, designed for use on the Model 4000 trailer, identified by NSN 1740-00-885-4698 and part number P/N 101719-77 or P/N 101719-79. The supplier must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, with all items palletized accordingly and shipped in compliance with DLA procedures. The contract requires firm fixed pricing with zero variance in quantity, and delivery is due within 60 days after award, with FOB origin and inspection and acceptance occurring at destination. Covered defense information applies, and the contractor must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. All supplies must be marked and labeled to prevent government identification on non-accepted items, and shipments must be sent to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with transportation and freight details governed by DLAD procedural notes. The solicitation was issued under contract number SPE8EF-26-Q-0168 with a response deadline in August 2026 and a required delivery date of September 30, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
BEARING,SLEEVE,LINE
Solicitation # SPE4A626Q1284
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on manufacturers capable of producing the sleeve bearing with NSN 3110-01-341-6408, previously sourced from KATO ENGINEERING INC. with part number 012-63499-54. This request is purely for market research and does not constitute a solicitation, proposal, or binding commitment from the government. Respondents are asked to identify any sources that can manufacture the item, including the manufacturer’s location by city and state or country, and to provide contact information if available. All submissions must be sent to Matthew Diefes at matthew.diefes@dla.mil or via phone at 804-718-8776, with responses due by August 12, 2026. Participation is entirely voluntary, and no contract award is guaranteed based on the information received. The solicitation is categorized as a sources-sought notice under NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing, and carries no set-aside preferences. It is posted under solicitation number SPE4A6326Q1284 with a primary point of contact at DLA Aviation’s office in Richmond, Virginia, and a secondary contact available for follow-up. The place of performance is also listed in Richmond, Virginia. The notice explicitly states that responses are not offers and the government has no obligation to proceed with procurement as a result of the information gathered. Interested parties are encouraged to submit details by the deadline to assist in identifying potential suppliers for future procurement planning.
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
GOVERNOR, PUMP, PRESS_End_Item_TF33_NSN_2915015571122RV_PN_5225-1181
Solicitation # FD20302700090
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of the Governor, Pump, Press with Part Number 5225-1181 and National Stock Number 2915-01-5571122RV, intended for use on the TF33 engine platform. This initiative, issued under Notice ID FD2030-27-00090, is not a solicitation or a commitment to award a contract, and no funds are currently available for this effort. The government is seeking information from potential suppliers capable of full-scale production, including component procurement, inspection, testing, preservation, packaging, and shipping, as well as management of long-lead items, diminishing manufacturing sources, and nonrecurring engineering costs necessary to qualify as an approved source. The estimated requirement is for 37 units, and the industry classification is NAICS 336412 with a size standard of 1,500 employees. All business sizes and categories—including Small Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses—are encouraged to respond. Responses must be submitted via the designated “Add Me to Interested Vendors” button by the deadline of August 6, 2026, 4:59 a.m. Central Standard Time. The point of contact for inquiries is the 421st SCMS Requirements Workflow email, and the place of performance is Tinker AFB, OK 73145. This market research aims to evaluate competition viability and determine if the requirement can be set aside for small business participation, but no contract will result from this notice alone.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 336412
New
Federal
NSN 2915-01-313-4615, BYPASS INDICATOR, WSDC: 26F
Solicitation # SPE4A726R0755_SourceSought
The Department of Defense, through DLA Aviation, is conducting market research to identify qualified suppliers capable of manufacturing the bypass indicator identified by NSN 2915-01-313-4615 and part number TD221MF0DCY5. This effort is not a solicitation and no contract award will result from this request. The government seeks capability statements from organizations that can perform the full scope of new manufacture including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of material shortages. The NAICS code 336412 applies, and the requirement spans a five-year base period with no options. Currently, Pall Aeropower Corp is the approved source, and any other vendor must submit a Source Approval Request to be considered. Responses must include organizational details, capability documentation, and information on subcontracting or teaming arrangements, with no financial liability assumed by the government for submission costs. All submissions are due by August 10, 2026, and must be emailed to TATJANA.KLEMMER@DLA.MIL. The government will use responses to determine whether to set aside the eventual contract for small businesses or pursue full and open competition, potentially making multiple awards. The DLA does not hold complete technical data on the part, further emphasizing the importer for suppliers to demonstrate technical and operational competency. No telephone inquiries will be accepted, and no feedback or evaluations will be provided on submissions. Interested parties should note that the place of performance is undetermined and final unit pricing will be established at contract award time. Questions regarding this market research should be directed to TATJANA.VAUGHAN@DLA.MIL.
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
Frame, Access Hole _End_Item_B-2_NSN_1560014687510FW_PN_DAA3144A671-067
Solicitation # FD20302602419-SS
The U.S. Air Force, through the 424th Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research under FAR Part 10 to identify potential sources for the new manufacture of a Frame, Access Hole with NSN 1560-01-468-7510FW and part number DAA3144A671-067, intended for use on the B-2 platform. This is not a solicitation or a commitment to award a contract; no funds are currently available, and no contractual obligation will result from responses. The effort aims to assess industry capability, determine if the requirement can be competed, and evaluate potential for a small business set-aside, with interest in all business sizes including small, small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses. Respondents must provide comprehensive business information, including CAGE code, UEI, size certification under NAICS code 336413, and ownership details, and must be prepared to meet rigorous qualification standards for sourcing and manufacturing. Potential sources must be capable of full new manufacture including component procurement, inspection, testing, packaging, and shipping, and may be required to assume nonrecurring engineering costs to become an approved supplier. Technical data is not provided by the government, and responders must independently acquire or demonstrate access to necessary engineering drawings and specifications through the designated Public Sales Desk. Compliance with Manufacturing Qualification Requirements (MQR), as referenced under MQR-PSD-1, is mandatory and includes submission of a Source Approval Request (SAR) package via DoD SAFE, accompanied by a certified Company Profile, SIP certifications for critical processes, Master Tooling certifications, and a signed Technical Data Rights Certification using Appendix E wording. Responses must include documentation of NADCAP, OEM, or DoD audit certifications where applicable and adhere to submission protocols strictly through designated email channels. All submissions are due by August 11, 2026, and must be submitted electronically with no oral responses permitted. The government will use this input solely for acquisition strategy development and planning purposes.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
FUEL CONTROL MAIN_End_Item_J85_NSN_2915012575403OK_PN_6001T8G09A
Solicitation # FD20302700144
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Fuel Control Main component with part number 6001T8G09A and NSN 2915012575403OK, intended for use on the J85 platform. This effort is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award or funding is intended at this stage. The government seeks information from all types of businesses, including small businesses, service-disabled veteran-owned firms, women-owned businesses, 8(a) certified entities, and HUBZone participants, to assess competitive potential and determine if a small business set-aside is feasible. The requirement involves full new manufacture, including component procurement, inspection, testing, packaging, shipping, supply chain management, and addressing diminishing manufacturing sources and material shortages, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. Manufacturing qualification requires submission of a Source Approval Request package through the DoD SAFE system, accompanied by technical data compliance, including adherence to the Manufacturing Qualification Requirements (MQR-PSD-1) referenced publicly on SAM.gov and any applicable Engineering Data List. Technical drawings, if referenced on the EDL, must be requested through the designated Tinker Engineering Public Sales Desk. Companies responding must provide detailed business information including CAGE code, UEI, NAICS classification, size status, ownership structure, and certifications to support market research objectives. Responses must be submitted by September 3, 2026, and all submissions must be in writing, with no oral responses accepted. The estimated spares requirement is anticipated to be fulfilled by December 27, 2027, though the exact solicitation schedule remains undetermined until market research concludes.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336412
New
Federal
Roller Bearing_End_Item_J85_NSN_3110006185880OK_PN_327B430P1
Solicitation # FD20302700167
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of roller bearings with part number 327B430P1 and NSN 3110-00-618-5880, intended for use on the J85 platform. This is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on responses. The government seeks information from all potential vendors, including small businesses, disadvantaged businesses, service-disabled veteran-owned firms, HUBZone businesses, and women-owned small businesses, to determine if the requirement can be competed or set aside for small businesses. The estimated need is for 177 units, and potential suppliers must demonstrate capability to handle full manufacturing, inspection, testing, packaging, logistics planning, supply chain management, and address diminishing manufacturing sources and material shortages, including any associated nonrecurring engineering costs. Responses are due by August 10, 2026, and must be submitted through the designated workflow email address. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the place of performance is Tinker AFB, Oklahoma. The Department of the Air Force, under the Air Force Sustainment Center, is leveraging this effort to evaluate the industrial base and refine its acquisition strategy for future sourcing. No funds are currently available for this market research phase, and submissions will be used solely to inform future procurement decisions. Participation requires selecting the “Add Me to Interested Vendors” button on the posting.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC96
The contract solicitation is for 648 newly manufactured turbine rotor blades, NSN 0R-2840-016995266-B8, under emergency acquisition authorities with a waived synopsis due to urgency. All items must be newly manufactured with no acceptance of refurbished, remanufactured, or repaired components. Only government-approved sources are eligible for award, and any distributor must submit an authorized distributor letter on the approved source’s letterhead at time of proposal submission. The part is classified as flight critical and has an unstable design, with known performance issues and anticipated configurational changes that will render the current version obsolete. Due to these technical uncertainties and critical safety implications, Government source approval is mandatory prior to contract award, and only previously approved sources have been solicited. New sources must submit comprehensive documentation per NAVSUP WSS Source Approval Brochures for spares or repair, and failure to provide complete data will render an offer ineligible. The requirement is being handled under FAR 6.302-1 as a sole-source action due to limited competition eligibility. Proposals are due by September 21, 2026, and must be submitted to the designated point of contact; failure to meet source approval requirements may still allow award based on Fleet support needs if timely approval cannot be secured.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--BLADE,COMPRESSOR,AI
Solicitation # SPRPA126QYC98
This solicitation is for 16 newly manufactured compressor blades designated as NSN 0R-2840-017141020-B8 under emergency acquisition authority, with delivery terms FOB origin. The procurement is strictly limited to approved government sources due to the critical safety nature of the item, which is flight critical and requires engineering source approval to ensure continued performance and quality. Refurbished, remanufactured, or repaired components are expressly prohibited, and only suppliers previously vetted and approved by the Government may submit bids. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is subject to DFARS Clause 252.209-7010 for Critical Safety Items and DLAD Clause 46.292 for product verification testing at the source. The Government retains exclusive access to proprietary technical data, manufacturing knowledge, and design control capabilities essential to the part’s integrity, which are not commercially available and cannot be replicated without the approved source’s expertise. Non-approved sources must submit comprehensive documentation per the NAVSUP Weapon Systems Support Source Approval Brochures—either for spares or repair—detailing experience with identical or similar items, and failure to provide this information will render proposals ineligible. Proposals must be received by September 21, 2026, and submission does not guarantee competition, as this procurement operates under FAR 6.302-1 as a sole-source action due to urgency and technical limitations. The contracting office is the Department of Defense’s DLA Aviation at Philadelphia, with Brett Duffey as the primary point of contact.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC97
The contract solicitation pertains to the procurement of 586 newly manufactured turbine rotor blades, identified by NSN 0R-2840-017141155-B8 and reference number 5144T23P02, to be delivered FOB origin. This is a single-source acquisition under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition, with only previously government-approved sources being solicited. Refurbished, remanufactured, or repaired parts are strictly prohibited, and all offers must be for brand-new components. Offerors not currently approved sources must submit complete documentation per NAVSUP WSS Source Approval Brochures to demonstrate manufacturing capability, including technical data on similar items or proof of prior approval under review. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at time of proposal submission. The acquisition is being conducted under emergency flexibility authority, waiving the standard synopsis requirement due to urgency. Government inspection and acceptance will occur at the manufacturer’s facility under DLAD clause 46.292, and the contract incorporates DFARS clauses 252.209-7010 for Critical Safety Item identification and potentially 252.242-7005 regarding contractor business systems. The point of contact for all submissions is Brett N. Duffey of the Defense Logistics Agency Aviation in Philadelphia, with proposals due by September 21, 2026. Any proposals lacking the required source approval documentation or failing to confirm prior submission of such data will be deemed technically unacceptable and ineligible for award. While the solicitation allows any responsible source to respond within 45 days, the government reserves full discretion to proceed without competition based on fleet support needs and timelines, and responses will be evaluated solely to determine if competitive procurement is feasible. No award will be delayed if source approval cannot be finalized in time to meet operational demands.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
DIBBS
Manufacture and Supply of Aircraft Escape Slide (NSN: 4240-01-075-6640)The contract requires the full manufacturing, testing, and delivery of seven aircraft escape slides identified by NSN 4240-01-075-6640, aligned with all applicable military specifications and quality assurance standards. Each unit must meet rigorous traceability requirements to ensure component integrity and compliance throughout the production lifecycle, with full documentation maintained for verification and audit purposes. The work is subcontracted under the Department of Defense via the Depot Oklahoma office, and the manufacturing must adhere to NAICS code 336412, which pertains to aircraft parts and equipment manufacturing. Proposals must be submitted by August 10, 2026, with the solicitation posted on August 4, 2026, and all delivered units are expected to satisfy federal defense supply chain protocols. The place of performance is not explicitly defined, but the contract implies operations will support U.S. military logistics, and the end product must be fully functional, safety-certified, and ready for immediate integration into aircraft systems. The subcontract nature indicates the prime contractor will oversee compliance, but the supplier is directly accountable for meeting all technical, quality, and delivery obligations without deviation.
DEPOT OKLAHOMA

POSTED

1 day ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

NAICS: 335131
New
DIBBS
INDICATOR, LIGHT
Solicitation # SPE4A1-26-T-2517
The contract pertains to the procurement of two Indicator, Light units identified by NSN 6210-00-462-1047 and Lockheed Martin part number 4L97503-143B, with a total quantity of two units to be delivered in 170 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking specifications, and DLA packaging guidelines. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. Configuration changes require formal engineering change proposals or variance requests, and the supplier must manage cybersecurity compliance via CMMC Level 2 self-assessment. Physical identification of the item must follow RQ017 requirements, and government identification must be removed from non-accepted supplies. Deliveries are to be made to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with no variance allowed in quantity. The contract includes strict packaging and marking instructions including a fragile designation and specific internal and external container codes, and transportation instructions are governed by DLA procedural notes. The solicitation was issued on August 5, 2026, with a response deadline of August 13, 2026, under NAICS code 335131, and is managed by the Department of Defense’s Aviation Supply Chain.
Residential Electric Lighting Fixture Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A1-26-T-2515
The contract pertains to Production Lot Testing for six units identified by NSN 0001S00000062 under solicitation SPE4A1-26-T-2515, with a total small business set-aside and a NAICS code of 336413. The contractor is required to conduct and document production lot tests in accordance with the technical data package, preparing a Production Lot Test Report labeled with the specific contract and lot numbers. This report must be presented to the Quality Assurance Representative for review and accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving reports, a copy of the contract or order, all relevant test reports displaying actual results and tolerances, material and process certifications, inspection method sheets, and duly marked manufacturing drawings that restrict public disclosure and limit government use as necessary. The delivery schedule mandates completion within 341 days from award, and all documentation must be included with every shipment of PLT reports. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense’s Aviation Supply Chain through the office located in New Cumberland, Pennsylvania, with Allison Hugel as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334610
New
DIBBS
DISK DRIVE UNIT
Solicitation # SPE4A1-26-T-2516
The contract is for the procurement of 31 Disk Drive Units with NSN/Part Number 7025-01-674-6149 under solicitation SPE4A1-26-T-2516, issued by the Department of Defense’s Aviation Supply Chain through the Defense Logistics Agency. The delivery schedule requires fulfillment within 171 days after award, with performance taking place in New Cumberland, Pennsylvania. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Documentation for source approval must be submitted as part of the offer, and all packaging must comply with DLA standards. Inspection and acceptance occur at the origin, and government identification must be removed from any non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons both inside and outside the U.S., and requires prior authorization from the Department of State or Commerce. Access to controlled data is limited to contractors with approved U.S./Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The solicitation opens on August 4, 2026, with responses due by August 12, 2026, and the NAICS code is 334610 for computer and peripheral equipment manufacturing.
Manufacturing and Reproducing Magnetic and Optical Media

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332996
New
DIBBS
MANIFOLD, HYDRAULIC
Solicitation # SPE4A1-26-T-2513
The contract specifies the procurement of a hydraulic manifold, a critical component for aircraft hydraulic vacuum deicing systems, manufactured from Alcoa forging No. 51564 made of 2014 aluminum alloy and heat treated to 2014-16, conforming to Lockheed Martin drawing 351483. This is a restricted-source item requiring formal government engineering approval, and it is designated as a critical application item with stringent quality and security controls. The item must comply with multiple technical and quality requirements from the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 Cybersecurity Self-Assessment, covered defense information protocols, and physical identification marking per RQ017. Zero-defect sampling is mandated using MIL-STD-1916 or ASQ standards, with acceptance criteria of zero non-conformances unless otherwise specified, and attributes are classified with verification levels VII, IV, and II for critical, major, and minor features respectively. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials require prior government approval. The item shall be packaged per ASTM D3951, with all packaging and labeling conforming to MIL-STD-129 and palletization as outlined in DLA Packaging Requirements RP001, with precedence given to DLA requirements over ASTM standards. The unit of issue is one each, with no tolerance for quantity variance, and delivery is FOB origin, inspected and accepted at destination. The required delivery date is 171 days after award, with a need ship date of January 31, 2027 and original required delivery date of September 29, 2027. Packaging and shipping details direct delivery to DLA Distribution Depot Hill in Hill AFB, Utah, with specific freight shipping instructions and transportation procedures referenced. Contract data identifies the solicitation as SPE4A1-26-T-2513, with a primary point of contact at DLA Aviation Supply Chain, and the item is classified under NAICS code 332996 for other fabricated metal product manufacturing.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332911
New
DIBBS
VALVE, ELECTRO HYDRA
Solicitation # SPE4A1-26-Q-0111
A solicitation has been issued for 69 electro-hydraulic valves with the NSN 4810-00-488-4186 under contract number SPE4A1-26-Q-0111, with a required delivery timeline of 260 days after award. The item must be physically identified and marked in accordance with bare item marking requirements, ensuring proper traceability and compliance. The request originates from the Department of Defense’s Aviation Supply Chain via the Defense Logistics Agency, with Angelina Dunlap listed as the primary point of contact for inquiries. The solicitation was posted on August 4, 2026, and responses are due by August 11, 2026, classified under NAICS code 332911 for other miscellaneous fabricated metal product manufacturing. Performance location is unspecified, but the contracting entity operates federally within the United States.
Industrial Valve Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A1-26-T-2514
This contract specifies the procurement of a special-purpose electrical cable assembly under solicitation SPE4A1-26-T-2514, with a quantity of two units identified by NSN 6150-01-292-2742 and part number 717720625-009. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with compliance determined by the revision in effect on the solicitation issue date or award date depending on acquisition size. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling, with palletization adhering to DLA packaging standards, and technical data references indicate no bidset is available from DLA. Delivery is due in 171 days FOB origin, with inspection and acceptance occurring at the destination, and no variance is permitted in quantity. The unit of issue is each, with a total contract value based on a unit price for two units. The supplier must comply with CMMC Level 2 self-assessment requirements and implement configuration change management via engineering change proposals for any deviations or waivers. The deliverables must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, using approved transportation protocols under DLAD Proc Note C19 and C20, with an original required delivery date of February 5, 2028, and a need ship date of January 31, 2027. The contract is administered by the Department of Defense’s Aviation Supply Chain office, with primary point of contact Allison Hugel.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Compliance SupportThe contract seeks administrative support to ensure compliance with Federal Acquisition Regulation clauses related to small business subcontracting representation and the implementation of accelerated payments to small business subcontractors. The work involves providing guidance and operational assistance to uphold reporting obligations, verify subcontractor eligibility, and facilitate timely financial disbursements in accordance with federal mandates. This support is critical for maintaining regulatory adherence and fostering equitable participation by small businesses within the supply chain. Performance of the services is centered in Tracy, California, with the procurement categorized under NAICS code 541611 for management consulting services. The solicitation is posted under the Department of Defense’s Aviation Supply Chain initiative, and responses are due by August 11, 2026. While no specific set-aside designation is indicated, the focus on small business compliance underscores the intent to prioritize and empower small business subcontractors across Defense-related operations. The contract will require detailed records management, coordination with subcontractors, and alignment with evolving federal procurement standards to ensure full compliance and payment efficiency.
Administrative Management and General Management Consulting Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Freight / Transportation ServicesThe contract specifies the transportation of finished grommets from origin to destination, with strict compliance required for ocean shipments using U.S.-flag vessels or timely processing of any applicable waivers. It falls under the NAICS code 484220, indicating it pertains to truck transportation of freight, although it encompasses both domestic and international logistics. The place of performance is identified as Tracy, California, with a zip code of 95304-5000, suggesting that while shipments may begin or end elsewhere, operational oversight and key delivery points are centered in this location. The contract is classified as a subcontract and was posted on August 3, 2026, with a response deadline of August 11, 2026, indicating a narrow window for bids and submissions. The contracting entity is the Aviation Supply Chain under the Department of Defense, emphasizing the defense-related nature of the logistics involved and the critical need for adherence to regulatory and security standards throughout the supply chain.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Packaging and Labeling Services for Defense LogisticsThe contract requires comprehensive packaging and labeling services for nonmetallic grommets in strict compliance with MIL-STD-2073-1E standards, ensuring all hazardous materials are clearly marked with appropriate warnings and unitized for FOB origin shipment. All packaging must meet military specifications for durability, protection during transit, and proper identification, with special attention to hazard communication to safeguard handling personnel and ensure regulatory adherence. The work is designated as a subcontract under NAICS code 561910, indicating it falls under other support services for transportation, and is part of a Defense Logistics initiative managed by the Aviation Supply Chain under the Department of Defense. The offer deadline for responses is August 11, 2026, with the solicitation posted on August 3, 2026, and performance tied to the specified place of performance in Tracy, California, with a ZIP code of 95304-5000. The contract is not subject to any set-aside provisions and is accessible through the DIBBS portal for interested parties. No point of contact information is provided, suggesting inquiries must be directed through the official solicitation channel at the linked DIBBS webpage. All deliverables must conform to the referenced military standard without deviation, emphasizing precision in labeling, unitization, and compliance with DoD logistics protocols.
Packaging and Labeling Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339999
New
DIBBS
Nonmetallic Grommet Manufacturing and AssemblyThe contract seeks a subcontractor to manufacture nonmetallic grommets compliant with military specifications, covering the full production cycle from material sourcing and molding to finishing and rigorous quality control processes. All components must meet exacting defense standards, ensuring durability, precision, and reliability under demanding operational conditions. Performance is required at a designated location in Tracy, California, with the zip code 95304-5000 designated as the place of performance. The solicitation, classified under NAICS code 339999 for other miscellaneous manufacturing, is issued by the Department of Defense through its Aviation Supply Chain office and is structured as a subcontract opportunity. Responses must be submitted by August 11, 2026, with the request posted on August 3, 2026, providing a limited window for interested parties to prepare compliant proposals. The contract emphasizes adherence to military-grade requirements throughout all stages of production, with no set-aside designation specified, making it open to qualified suppliers regardless of business size or ownership structure.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
Manufacture and Supply of Stud Assemblies with Turnlock FastenersThe contract requires the manufacture, quality control, packaging, and delivery of stud assemblies incorporating turnlock fasteners, all to meet rigorous military standards for labeling, preservation, and hazardous materials handling. The work must ensure full compliance with defense specifications throughout every phase of production, from initial fabrication to final inspection and shipment. The place of performance is designated as Tracy, California, with the zip code 95304-5000, indicating the physical location where deliverables must be prepared and rendered. This is a subcontract under the NAICS code 332510, classified under the Aviation Supply Chain within the Department of Defense, and the response deadline is August 11, 2026. The solicitation is open for qualified subcontractors capable of meeting high-volume, precision manufacturing demands with strict adherence to military-grade quality and safety protocols. All components must be properly documented, preserved against corrosion and environmental degradation, and labeled in accordance with federal defense regulations. The offeror must possess the technical and logistical capability to ensure end-to-end compliance, with delivery timelines aligned to mission-critical aviation supply chain requirements.
Hardware Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Conformance CertificationThe contract requires comprehensive final inspection and testing of components to ensure dimensional accuracy meeting Class 3A and 3B thread specifications, strict adherence to material compliance standards, and full alignment with established quality systems. All deliverables must be verified through rigorous inspection protocols and supported by a Certificate of Conformance issued in accordance with either MIL-STD-1916 or ASQ Z1.4 standards, ensuring traceability and regulatory alignment. The work is to be performed at the designated location in New Cumberland, Pennsylvania, with zip code 17070-5002, under the oversight of the Department of Defense’s Aviation Supply Chain office. This is a subcontract opportunity classified under NAICS code 541330 and was posted on August 3, 2026, with a response deadline of August 11, 2026. The solicitation is open for competitive bidding through the DIBBS platform, and all participants must provide documented evidence of their ability to meet the technical, material, and quality assurance requirements outlined. No set-aside designation has been specified, and the contract is expected to involve high-precision manufacturing scrutiny with full compliance obligations tied to defense industry standards.
Engineering Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details