Top

Road and Highway Paving

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

CAMP PENDLETON, CA, 92055-5554, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Grading, base preparation, and asphalt or concrete paving for roadways, shoulders, and intersections.

Similar Contracts

Same NAICS industry code

NAICS: 237310

New

DIBBS

Asphalt Paving and Site Surfacing

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Fleet Fast EV Charging - ConstructionThe Port of Seattle’s Aviation Project Management Group is forecasting a construction contract for fast EV charging infrastructure, aligned with NAICS code 237310 for Electrical and Other Wiring Installation. The solicitation is set to be released on July 31, 2026, and will focus on the installation of high-capacity electric vehicle charging systems to support fleet operations, likely targeting airport and ground service equipment. The project is expected to involve site preparation, electrical upgrades, and integration of charging hardware and software systems at unspecified locations within the Port’s aviation facilities. Key contacts for inquiries are Angela Peterson, the primary point of contact, and Katie Techa, the Project Manager, who can be reached via phone or email provided for further details. No set-aside provisions or eligibility restrictions are indicated at this time.

Aviation Project Management Group

POSTED

DEADLINE

Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will revitalize the entry and exit drives along 19th Ave W, along with the former Downie Building (C-14) footprint and surrounding parking areas. Existing pavement in deteriorated condition will be milled and resurfaced, while aging stormwater infrastructure will be fully replaced and expanded to divert runoff from combined sewer lines into dedicated storm drainage systems, with water quality treatment incorporated where qualifying pavement surfaces are replaced. The remaining concrete slab from Phase 1 will be demolished to make way for a blended layout of new parking spaces and native green space designed as a pollinator habitat, potentially housing a stormwater treatment facility. An irrigation system will be installed to support the new landscaping, which will also extend to the median along the entry drive. New electric vehicle charging stations will be integrated into the expanded parking area, and a protected two-way bike lane will be constructed to connect the terminal’s entry directly to the West Wall bike path, enhancing multi-modal accessibility. Pedestrian pathways will be upgraded to improve connectivity to the intersection of 21st Ave W and W Emerson Pl, as well as the adjacent King County Metro bus stop. Lighting will be enhanced throughout the newly configured parking and path areas, and comprehensive wayfinding systems will be implemented to guide pedestrians and cyclists through the redeveloped campus. The project is forecasted to be solicited under NAICS code 237310 by the Port of Seattle’s Waterfront Project Management office, with primary contact information provided for project inquiries and coordination.

Waterfront Project Management

POSTED

DEADLINE

Asphalt Paving & Striping Unit Price Portwide 2026The contract encompasses a broad range of pavement and infrastructure maintenance activities across multiple Port of Seattle locations including Seattle-Tacoma International Airport, Maritime Properties, and adjacent areas. Work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, haul and disposal of grinding spoils, removal of existing striping, surface preparation for new markings, various stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, sidewalk lifting and leveling, and drainage system enhancements. All work requires adherence to performance standards and may involve obtaining necessary permits for improvements to public infrastructure. This procurement is issued under the title Asphalt Paving & Striping Unit Price Portwide 2026 by the Port Construction Services division of the Port of Seattle. The solicitation is posted as a forecast with a NAICS code of 237310 indicating highway and street construction. Primary point of contact is Heather Bowden, with Lesley Miles serving as project manager; inquiries should be directed via their provided email addresses and phone numbers. The contract will be administered across numerous port-wide sites with performance expected to meet specified technical and safety requirements, though no specific location details are provided in the data. The forecast date of July 31, 2026, suggests this is a planning notice for future work, not an active solicitation.

Port Construction Services

POSTED

DEADLINE

LACSD Surface Water PFAS Removal Project No. 251, CA

Solicitation # lacsd-surface-water-pfas-removal-project-no-251-ca

The contract involves the design and construction of PFAS treatment facilities at the Bernina and Cedar Glen Water Treatment Plants in California, encompassing comprehensive civil, structural, mechanical, electrical, instrumentation, and process system upgrades to address groundwater contamination. The project is being managed by Pyramid Building & Engineering, Inc. under solicitation number lacsd-surface-water-pfas-removal-project-no-251-ca, with a response deadline of September 3, 2026, and is categorized under NAICS code 237310 for water transport construction. The initiative is designated for Disadvantaged Business Enterprises as defined by the Department of Transportation, prioritizing participation from qualified small and minority-owned firms. The primary point of contact for inquiries is John Garrison, reachable via email at estimating@pyramidbuilding.net or phone at 760-949-9005. All work is to be performed at the specified facility locations in California, with no additional office or headquarters address provided.

Pyramid Building & Engineering, Inc.

POSTED

DEADLINE

NCMT Berth 24-11 Structural Repair

Solicitation # ncmt-berth-24-11-structural-repair-0

The project involves the rehabilitation of the existing concrete marginal wharf at National City Marine Terminal Berth 24-11 in San Diego, California, along with the reinstallation of the shore power system, as detailed in the contract drawings and specifications. The scope encompasses a wide range of specialized tasks including demolition, asbestos and lead abatement, contaminated soil removal, concrete coring and saw cutting, underwater pile jacket installation, diving services, electrical and utility work, storm drain upgrades, and miscellaneous metal fabrication. Numerous subcontracted services are required to support the main effort, including environmental monitoring, LIDAR surveys, materials testing, timber disposal, and water utility coordination. The work is being executed under the auspices of the San Diego Unified Port District with Kiewit Infrastructure West Co. serving as the prime contractor, managing the solicitation and coordination of qualified subcontractors and suppliers. Bidders must comply with a strict set of eligibility criteria, including possession of a valid California Contractor’s License and current registration with the Department of Industrial Relations. All firms performing onsite work are required to be signatories to collective bargaining agreements with key trades—carpenters, laborers, cement masons, ironworkers, operating engineers, and teamsters—and must adhere to the project’s Project Labor Agreement. Additionally, responsible subcontractors and material contractors must provide bonding equal to 100% of their contract value, with Kiewit agreeing to reimburse bond premiums. Insurance requirements are mandatory and must meet acceptable standards. The contract actively seeks participation from Disadvantaged Business Enterprises, Disadvantaged Veteran Business Enterprises, Minority Business Enterprises, and Woman Business Enterprises, with certification documentation required from recognized authorities such as the SBA, DOT’s DBE program, or state and private certification bodies. All bids must be submitted via Kiewit’s BuildingConnected platform in response to an Invitation to Bid, with a hard deadline of August 6, 2026, at 2:00 p.m. Proposals are subject to pass/fail evaluation on licensure, DIR registration, insurance, and labor compliance; no weighted scoring system is outlined, and award will be made to responsive and responsible bidders meeting all mandatory requirements. Plans and specifications are available upon request at Kiewit’s office in Santa Fe Springs, California.

Kiewit Infrastructure West Co.

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, BLANCO CO, HOT-MIX COLD-LAID

Solicitation # 6496-52-001_0926

The Texas Department of Transportation has issued a maintenance contract for a hot-mix cold-laid asphalt project along U.S. Highway 281 in Blanco County, with an estimated cost of $2,782,000. This solicitation, identified by number 6496-52-001_0926, was posted on August 5, 2026, and responses are due by September 2, 2026. The work involves pavement maintenance using cold-laid hot-mix asphalt techniques, targeting routine infrastructure upkeep rather than new construction. The contract is classified under a SLED organizational type, indicating it is a state, local, or education entity initiative, and is administered through the Texas SmartBuy procurement portal. Primary contact for inquiries is available via the provided phone number, and performance of the contract will occur entirely within Texas, specifically along the designated highway segment in Blanco County.

Texas Department of Transportation

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, LA SALLE CO, DEBRIS REMOVAL

Solicitation # 6506-24-001_0926

The Texas Department of Transportation has issued a maintenance contract for debris removal along Interstate Highway 35 in La Salle County, with an estimated cost of $1,268,533.20. The solicitation, identified as 6506-24-001_0926, was posted on August 5, 2026, and bids are due by September 2, 2026, at 7:00 PM. This contract is classified as a state-level maintenance effort under the SLED category and is open to qualified contractors seeking to perform necessary debris clearance operations on the specified highway segment. All work will be performed within the State of Texas, and the primary point of contact for inquiries is available through the provided phone number. The contract is accessible through the Texas SmartBuy portal and does not specify a set-aside program or NAICS code, indicating it is open to general competition. There are no additional details provided regarding subcontracting requirements, performance timelines, or specific debris types, but the scope is focused exclusively on removal activities along IH-35 in La Salle County. Contractors are expected to comply with state transportation standards and safety protocols during execution, and all documentation and communications should be directed through the designated agency point of contact.

Texas Department of Transportation

POSTED

DEADLINE

STATE LET MAINTENANCE CONTRACT, WEBB CO, SEAL COAT

Solicitation # 6500-58-001_0926

The Texas Department of Transportation has issued a maintenance contract for a seal coat application on US Highway 83 in Webb County, with a total contract value of $6,683,574.77. The solicitation, identified by number 6500-58-001_0926, was posted on August 5, 2026, and responses are due by September 3, 2026. This is a state-led maintenance effort categorized under SLED government organization, and no specific set aside or NAICS code is designated. Work is to be performed along the specified highway segment in Texas, and all communications and inquiries should be directed to the primary point of contact listed with the provided phone number. The contract can be accessed and reviewed through the TX SmartBuy portal using the provided link.

Texas Department of Transportation

POSTED

DEADLINE

Bake Parkway Resurfacing Project - Phase 1 (26S01B), Phase 2 (27S01D) and Normandale Drive and Regency Lane Resurfacing Project

Solicitation # 26S01B & 27S01D

The City of Lake Forest is soliciting bids for multiple street improvement projects along Bake Parkway, Normandale Drive, and Regency Lane, aimed at rehabilitating aging pavement and enhancing overall roadway conditions. Phase 1 of the Bake Parkway project spans from South Pointe Drive to just north of Commercentre Drive, while Phase 2 continues from just south of Commercentre Drive to Rancho Parkway South, with additional work on Normandale Drive between El Toro Road and Osterman Road, and Regency Lane from Lake Forest Drive to Normandale Drive. The scope of work includes full-depth asphalt reconstruction, resurfacing, restoration of signage and striping, replacement of ADA-compliant curb ramps and sidewalks, construction of concrete bus pads, reconstruction of driveways, and adjustments to utility grades to accommodate new pavement elevations. All projects require comprehensive traffic control measures and public notifications to minimize disruption during construction. Bids must be submitted by September 4, 2026, and are being solicited under the designation 26S01B and 27S01D by the City’s Public Works Department in California. The contract is open to qualified contractors without a designated set-aside, and responses should be directed to Ravi Shah, Principal Engineer, at the City of Lake Forest, with John Meza, Management Analyst, serving as the secondary point of contact. All work is to be performed within the specified project limits in Lake Forest, and successful bidders are expected to deliver high-quality, code-compliant improvements that extend the service life of the transportation network while ensuring accessibility and safety for all users. Further information is available through the City’s procurement portal.

POSTED

DEADLINE

Paving and Asphalt Resurfacing

POSTED

DEADLINE

Z--TX-FWS SANTA ANA NWR-TRAIL REPAIRS

Solicitation # 140FGA26R0029

This solicitation, titled TX-FWS SANTA ANA NWR-TRAIL REPAIRS and identified by number 140FGA26R0029, is a sources-sought notice issued by the U.S. Fish and Wildlife Service under the Department of the Interior for market research purposes only, not a formal request for proposals. It seeks interest from small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 237310 for Highway, Street, and Bridge Construction. The intended work involves trail rehabilitation and new construction at the Santa Ana National Wildlife Refuge in Alamo, Texas, including the repair of 5,700 feet of existing granite surfacing and the installation of 550 feet of new granite surfacing with Tensar TriAx Geogrid stabilization, along with caliche surfacing on other segments. All work must meet strict dimensional standards—6 to 10 feet wide and 4 inches deep for granite or 10 inches for caliche after compaction—with a level, pothole-free finish. The contractor must provide all materials, equipment, personnel, transportation, and supervision without government furnished resources. The contract requires a comprehensive Quality Control Program to be submitted within 30 days of award, and the Government will conduct 100% daily inspections via the Contracting Officer’s Representative, Joe D’Arrigo, who is authorized to monitor performance, inspect work, issue technical interpretations, and coordinate site access but cannot alter contract terms. Key personnel, including a Contract Manager and alternate, must be designated in writing and available weekday business hours. Contractors must identify any organizational conflicts of interest and submit mitigation plans, ensure all documents and personnel are clearly marked as contractor products, and use safety cones and flagging tape to protect public safety. Compliance with socioeconomic representation is mandatory, requiring submission of UEI numbers and business type classifications including Small Business, SDB, WOSB, VOSB, SDVOSB, HUBZone, or 8(a). While pricing is structured as a task-by-route schedule detailing square footage for specific trail segments, no total contract value is provided. The notice’s response deadline has passed, and this is not a contract award action but a research tool to assess industry interest and capability for an anticipated future solicitation.

POSTED

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Same awarding agency

NAICS: 334210

New

DIBBS

SHELL, TELEPHONE BASE

Solicitation # SPE8EN-26-T-2782

The contract pertains to the procurement of 10 units of a SHELL, TELEPHONE BASE with NSN 5805-01-554-4324 and part number VCD7000-P000R from SYMBOL TECHNOLOGIES INC. DBA 64928, to be delivered FOB origin within 167 days of the contract award, with an original required delivery date of April 26, 2027. The unit price is $10.00 per unit, totaling $100.00, with no variance allowed in quantity. All items must be packaged in accordance with ASTM D3951, but must comply with higher precedence requirements from the DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling and RP001 for DLA packaging standards. Palletization must follow RP001, and the goods must be labeled with the specified Unit of Issue and Quantity per Unit Pack. The delivery destination is the DLA Distribution facility in New Cumberland, PA, with transportation handled per DLAD Proc Note C19 and C20. The contract incorporates critical cybersecurity and defense information protocols, including RD002 for Covered Defense Information and RD004 requiring a CMMC Level 2 Self-Assessment. RA001 confirms that all technical and quality requirements identified by R or I numbers from the DLA Master List are enforceable. The contractor must comply with RQ011, which mandates removal of government identification from non-accepted supplies. The solicitation number is SPE8EN-26-T-2782, issued under NAICS 334210 by the Department of Defense, with a response deadline of August 17, 2026, and the contract is subject to federal procurement regulations. The point of contact for inquiries is Jennifer Esworthy, reachable via phone or email provided.

Telephone Apparatus Manufacturing

POSTED

DEADLINE

INTERFACE UNIT, AUTOMAT

Solicitation # SPE8EN-26-T-2837

The contract is for the procurement of two Interface Units, Automatic Data Processing, identified by NSN 7025-01-629-6527 and part number 781630-01 from National Instruments Corp, under solicitation SPE8EN-26-T-2837. Delivery is required within 167 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination. The total contract value is $4.00, with a unit price of $2.00 per unit and no variance allowed in quantity. All items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must be packaged and labeled per MIL-STD-129 and RP001, including palletization standards. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional components like batteries, fluorescent lamps, or controlled instruments, which must include a second containment boundary as per NAVSEA 5100-003D. Packaging must adhere to DLA’s specified QUP and U/I, and goods must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The contract also includes restrictions on government identification removal from non-accepted supplies and applies to covered defense information. The required ship date is February 1, 2027, with the original delivery deadline set for September 18, 2026.

Computer Storage Device Manufacturing

POSTED

DEADLINE

CAMERA-RECORDING, VIDEO

Solicitation # SPE8EN-26-T-2783

This contract pertains to the procurement of camera-recording video equipment under solicitation SPE8EN-26-T-2783, issued by the Department of Defense through the Defense Logistics Agency. The item is identified as a commercial item with the NSN 5836016474212 and part number 960-000971 supplied by Logitech Inc. The contract specifies a quantity of 531 units to be delivered FOB origin within 167 days, with inspection and acceptance occurring at the destination location. All packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, including marking per MIL-STD-129 with no special markings required. The delivery destination is DLA Distribution Cherry Point in North Carolina, and transportation is governed by DLA procedural notes C19 and C20. The required delivery date is November 21, 2026, with a need ship date of February 1, 2027, and no quantity variance is permitted. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, with exceptions limited to functional uses in batteries, fluorescent lights, certain instruments, weapon systems, and chemical reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary as specified in NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are to be sourced from the DLA Master List of Technical and Quality Requirements, with revisions governed by the solicitation or award date depending on acquisition type. The item is further subject to Covered Defense Information provisions and the specified unit of issue is each (EA), priced at $531.00 per unit, totaling $280,961.00. All documentation and compliance with these contractual stipulations are mandatory for contract performance.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2849

The contract is for the procurement of 20 units of a photographic equipment case, identified by NSN 6760-01-491-2090 and vendor part number P/N 1450 from Pelican Products Inc. The item must be delivered within 20 days from the order date, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply strictly with ASTM D3951 while adhering to all higher-priority DLA Master List of Technical and Quality Requirements, including MIL-STD-129 labeling and RP001 palletization standards. The equipment does not involve ozone-depleting substances and must be shipped using the fastest traceable means, explicitly excluding parcel post. Shipping instructions designate a specific military freight address in Portsmouth, NH, with a RDD code of 777 and project identifier TP 2. The contract includes mandatory adherence to DLA’s technical and quality requirements referenced by R and I numbers, accessible via the official DLA website, and requires removal of government identification from non-accepted materials. The solicitation number is SPE8EN-26-T-2849, with a response deadline of August 17, 2026, and the issuing agency is the Department of Defense’s Construction & Equipment T & IFO EQ office, with Jennifer Esworthy listed as the primary point of contact.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2843

This contract specifies the procurement of 15 disk drive units under solicitation SPE8EN-26-T-2843, a total small business set-aside with NAICS code 334112, managed by the Department of Defense. The items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, with special ESD-sensitive handling requirements designated by marking code 39. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, or naval equipment, and any exempted mercury-containing devices must be shockproof with secondary containment per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with all units delivered FOB origin, inspected and accepted at destination, and shipped without variance in quantity. The required delivery date is November 30, 2026, with a contract-allowed delivery window of 167 days, and shipments must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract mandates compliance with DLA transport procedures C19 and C20 and requires suppliers to meet specific unit of issue guidelines. Approved vendors include Management Services Group, ATP Electronics, Smart Embedded Computing, and Arrow Electronics, each with designated part numbers. The point of contact for this solicitation is Jennifer Esworthy, and responses were due by August 17, 2026.

Computer Storage Device Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2791

The contract pertains to the procurement of three keyboard, data entry units with NSN 7025-01-607-1165 under solicitation SPE8EN-26-T-2791, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required FOB origin within 167 days of award, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E using specific methods including preservative treatment, packaging material code 00, and containment defined as D3 unit and intermediate containers, with marking mandated under MIL-STD-129 and no special markings required. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same location serving as the freight shipping address. A required ship date of February 1, 2027 is specified, with an original required delivery date of April 19, 2027. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific approved uses such as batteries, fluorescent lamps, sensors, or chemical reagents, with portable devices containing mercury requiring shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. Covered defense information requirements apply to specific part numbers, and all technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on acquisition size. The unit of issue is EA, with a unit price of $3.00, totaling $9.00, and all compliance must align with DoD procurement protocols including ANSI X12 unit conversions and transportation guidelines referenced in DLAD procedural notes C19 and C20.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2793

The contract is for a restricted-source display unit identified by NSN 7025-01-611-1943, with a quantity of two units required under purchase request 7017757158. The item must be manufactured to the original equipment manufacturer’s drawing specifications and can only be supplied by prequalified sources listed in the solicitation; offers based on parts from other manufacturers must include comprehensive technical data for evaluation per DLAI 3200.1. Compliance with all DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Configuration changes, deviation requests, and removal of government identification from non-accepted supplies are governed by specified procedures. Delivery is due within 167 days after award, with performance located in Tracy, California, 95304-5000. The solicitation, numbered SPE8EN-26-T-2793, was posted on August 5, 2026, and responses are due by August 17, 2026, under NAICS code 334118. Primary point of contact is Jennifer Esworthy, reachable via email and phone provided.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2838

This contract specifies the procurement of a commercial off the shelf disk drive unit with NSN 7025-01-669-6190 under solicitation SPE8EN-26-T-2838, requiring 14 units to be delivered FOB origin within 43 days of contract award, with a required ship date of August 15, 2026, and original delivery deadline of October 22, 2026. The unit of issue is each, priced at $14.00 per unit, with no variance allowed in quantity. All items must be packaged in accordance with ASTM D3951, but must comply with the higher precedence DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling and RP001 for packaging standards. Palletization must adhere to DLA packaging requirements. The item is identified as a COTS product and must be marked per MIL-STD-130N for U.S. military property identification. No technical data package is available from DLA Troop Support, and vendors must not submit SAR requests to them. Approved manufacturers include G-Technology Inc, Adorama Inc., and Western Digital Federal LLC, each with their respective part numbers. Inspection and acceptance occur at the destination. All deliveries must be shipped to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland PA 17070-5002, with transportation governed by DLAD Proc Notes C19 and C20. The contract mandates compliance with all applicable technical requirements referenced in the DLA Master List, including RC001, RD003, and RQ011. Covered defense information may apply, and government identification must be removed from non-accepted supplies. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, managed by the Department of Defense, under NAICS code 334610. Primary point of contact is Jennifer Esworthy at DLA, reachable via phone and email provided.

Manufacturing and Reproducing Magnetic and Optical Media

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2801

The contract solicits two disk drive units with NSN 7025-01-673-5553 under solicitation number SPE8EN-26-T-2801, with a response deadline of August 17, 2026, and a delivery requirement within 110 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. All supplies must comply with DLA packaging standards, and non-accepted items must have all government identification removed prior to return. The item involves export-controlled technical data subject to ITAR or EAR, requiring prior authorization for any disclosure to foreign persons, regardless of location, and strict adherence to DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and official DLA approval. Cybersecurity requirements mandate that any third-party assessment be conducted by a CMMC Level 2 certified C3PAO, and all contractors must comply with Covered Defense Information protocols. The place of performance is New Cumberland, Pennsylvania, with primary point of contact Jennifer Esworthy, and the NAICS code is 334112.

Computer Storage Device Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2799

The contract pertains to the procurement of an Interface Unit, Auto, with the NSN 7025-01-622-2737 and part number 1769-L33ER, supplied by ROCKWELL AUTOMATION, INC. A total quantity of 22 units is required at a unit price of $22.00, with a total contract value of $484.00. Delivery is to be made within 48 days from the order, FOB origin, with no variance permitted in quantity. Inspection and acceptance both occur at the destination, which is the DLA Distribution San Joaquin warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 with no special marking code required. Palletization follows DLA packaging requirements, and transportation instructions are governed by DLAD procedural notes C19 and C20. The item is subject to strict restrictions on mercury, prohibiting its intentional addition or direct contact with the hardware except in specified functional applications such as batteries, fluorescent lights, sensors, or weapons systems as defined by NAVSEA, with portable mercury-containing devices requiring shockproof design and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List, with the applicable revision determined by the acquisition size and timeline. The solicitation number is SPE8EN-26-T-2799, with a procurement request number of 7017757335, and the original required delivery date is November 22, 2026, though the needed ship date is July 31, 2025. Points of contact for inquiries are provided, and the contract is subject to potential application of covered defense information regulations.

Computer Storage Device Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2823

This contract specifies the procurement of 43 units of toner cartridges identified by NSN 7045-01-722-4106 and part number W1480X under solicitation SPE8EN-26-T-2823, with a required delivery within 39 days of the contract award. The supplier must comply with all technical and quality standards listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards such as ASTM D3951. Packaging must follow MIL-STD-129 for marking and labeling and adhere to DLA Packaging Requirements for Procurement, including palletization guidelines. The cartridges must not contain intentionally added mercury or mercury compounds except under specific exceptions for functional uses such as batteries, fluorescent lamps, sensors, or chemical reagents, and any portable devices containing mercury must be shockproof with a secondary containment barrier as per NAVSEA 5100-003D. All supplies must be delivered FOB origin to the designated DLA distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The quantity is fixed with zero variance allowance, and the unit price is set at $43.00 per unit. The original required delivery date is October 27, 2026, but the need ship date is August 10, 2026, indicating potential early shipping expectations. Transportation and shipping instructions are governed by DLAD procedural notes C19 and C20.

Blank Magnetic and Optical Recording Media Manufacturing

POSTED

DEADLINE

Solicitation # SPE8EN-26-T-2846

The contract is for the procurement of six Disk Drive Units identified by NSN 7025-01-728-7081 under solicitation SPE8EN-26-T-2846, with a requirement for delivery within 20 days after order. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with performance to be carried out at Newport, Rhode Island, 02841-1703. Technical and quality specifications referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, non-accepted supplies must have government identification removed, and source approval documentation is required. The contract also includes provisions for Covered Defense Information, indicating potential handling of sensitive data. The contracting activity falls under the Department of Defense with the office listed as Construction & Equipment T & IFO EQ and is primarily managed by Jennifer Esworthy, reachable via provided contact details.

Computer Storage Device Manufacturing

POSTED

31 minutes ago

DEADLINE

in 12 days

View Details