Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Road and Highway Paving

Active

Federal

Response Deadline08/11/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Road and Highway Paving is a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, reserved exclusively for small businesses. It encompasses all aspects of road infrastructure construction, including grading, base preparation, and the installation of either asphalt or concrete paving for roadways, shoulders, and turn lanes. The work is designated for performance in Cherry Point, North Carolina, with a ZIP code of 28533. The solicitation was posted on July 23, 2026, and all responses are due by August 11, 2026, at 3:00 PM. The North American Industry Classification System code for this contract is 237310, which classifies it under Highway, Street, and Bridge Construction. The contracting entity is the Department of Defense under the command of the Commanding General, and no point of contact information is provided in the posted details. Participation is limited to small business concerns as defined by the Small Business Administration.

General Info

Small business subcontract for road paving in Cherry Point, NC, due August 11, 2026, under DoD.

Agency

Department Of Defense → Commanding GeneralView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Cherry Point, NC, 28533, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 03:00:00 PM UTCin 17 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Commanding General

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Commanding General

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Grading, base preparation, and asphalt or concrete paving for roadways, shoulders, and turn lanes.

Similar Contracts

Same NAICS industry code

Fleet Fast EV Charging - ConstructionThe Port of Seattle’s Aviation Project Management Group is forecasting a construction contract for fast EV charging infrastructure, targeting the development of a fleet electric vehicle charging system. The solicitation is categorized under NAICS code 237310, indicating it relates to highway, street, and bridge construction, suggesting the project involves the physical installation and integration of charging stations within transportation infrastructure. The posting date indicates this opportunity is anticipated to be released in 2026, with no specific solicitation number or set-aside details provided at this stage, but interested parties should prepare for potential full and open competition. The project’s place of performance and associated logistics are not yet defined, but it will be located within Port of Seattle operations, likely focusing on airport-related fleet vehicle support systems. Primary point of contact for inquiries is Angela Peterson, reachable via email and phone, serving as the Port Contact, while Katie Techa acts as the Project Manager, providing technical oversight. Both contacts can be reached through official Port of Seattle communication channels. No physical address or zip code is listed for the office or performance location, implying that further details regarding site specifics, scope, and submission requirements will be released with the formal solicitation in the future. Interested vendors should monitor the provided UI link for updates and official release of the full solicitation document when available.

Aviation Project Management Group

POSTED

about 2 hours ago

DEADLINE

Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will comprehensively upgrade the entry and exit drives along 19th Avenue West, including the demolition of the remaining concrete slab from the Downie Building (C-14) and the replacement of its footprint with a blend of new parking spaces and green areas designed as pollinator habitats, potentially incorporating a stormwater treatment feature. Existing pavement in degraded condition will be milled and overlaid, while the stormwater system will be fully replaced and expanded to divert runoff away from the combined sewer infrastructure into dedicated storm lines, with water quality treatment integrated where qualifying pavement surfaces are replaced. A new irrigation system will support the landscaped green spaces, and additional landscaping will be introduced along the modified median within the entry drive. Electric vehicle charging stations will be installed in the newly configured parking area, and protected two-way bike lanes will be constructed to connect the terminal’s entry directly to the existing West Wall bike path. Pedestrian access will be enhanced with improved connectivity to the intersection of 21st Avenue West and W Emerson Place, as well as the nearby King County Metro bus stop. Lighting will be upgraded throughout the new parking zones and pedestrian pathways, and comprehensive wayfinding signage will be implemented to guide both pedestrians and cyclists. The project is managed by the Port of Seattle through its Waterfront Project Management office, with primary contact information and project details publicly available under NAICS code 237310 and posted as a forecast on July 25, 2026.

Waterfront Project Management

POSTED

about 2 hours ago

DEADLINE

Asphalt Paving & Striping Portwide Unit Price 2026The contract covers a broad range of pavement and infrastructure maintenance activities to be conducted across multiple sites within the Seattle-Tacoma International Airport, Maritime Properties, and surrounding areas. Work includes new asphalt paving and patching, asphalt overlays with fabric, crack sealing, seal coating, profile grinding, removal and disposal of grinding spoils, stripping and repainting of road markings, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, sidewalk lifting and leveling, and upgrades to road drainage systems, some of which may require permitting. All tasks are intended to maintain and improve the integrity, safety, and appearance of port-wide pavement surfaces and adjacent infrastructure. This is a unit price forecast contract titled Asphalt Paving & Striping Portwide Unit Price 2026, issued by the Port of Seattle through its Port Construction Services division. The North American Industry Classification System code is 237310, indicating it falls under Highway, Street, and Bridge Construction. The contract is not yet solicited and remains a forecast for fiscal year 2026, with a posted date of July 25, 2026. Primary point of contact for inquiries is Heather Bowden, with Lesley Miles serving as Project Manager; both can be reached via the Port of Seattle’s official contact details. All work must be performed at designated port locations, and contractors are expected to comply with all applicable regulations and standards governing airport and maritime infrastructure maintenance.

Port Construction Services

POSTED

about 2 hours ago

DEADLINE

2026 Territorial Drive Widening - Phase 1 & 2The 2026 Territorial Drive Widening Phase 1 & 2 Project aims to enhance traffic operations, safety, and capacity along a major corridor in the City of North Battleford, Saskatchewan. Phase 1 focuses on widening the intersection of Territorial Drive and the adjacent Service Road to increase turning radii and pavement width, improving maneuverability for all vehicles, particularly large commercial trucks, transit buses, and emergency vehicles, while also including a pavement overlay on the southbound lanes to extend their service life. Phase 2 extends the widening efforts northbound from the Carlton Trail intersection to the Airport Road intersection, adding lane width to improve traffic flow and reduce congestion on this heavily used stretch of roadway. The project is being executed in two distinct phases to ensure systematic improvements across the corridor while minimizing long-term disruption. All qualified contractors are invited to submit bids to perform the work as the Prime Contractor, with proposals due to the City Clerk's Department by August 6, 2026, either by mail or email. Questions regarding the bid documents must be submitted by August 4, 2026. The solicitation is identified by number 20260724 and was posted on July 25, 2026, with the formal closing time set for 8:30 PM on the due date. Bids must be directed to the City Clerk’s Department at 1291-101st Street, PO Box 460, North Battleford, SK S9A 2Y6, or emailed to tenders@cityofnb.ca, with the City Clerk’s Department serving as the primary point of contact for all inquiries.

City of North Battleford

POSTED

about 6 hours ago

DEADLINE

HWY-OM-2027-47 Sign Replacement at Various Locations, OahuThe contract involves the replacement of highway signs across various locations on the Island of Oahu on an open-ended, as-needed basis, ensuring ongoing maintenance and compliance with signage standards. The work is not tied to a fixed schedule but responds to operational needs such as damage, obsolescence, or regulatory updates, requiring the contractor to remain responsive and flexible throughout the contract period. Issued under solicitation number B27000121 by the Hawaii Department of Transportation, this opportunity is open to qualified vendors with a response deadline of August 15, 2026. The project is classified under a state, local, or educational government agency type and is managed by the office in Hawaii with Alan Hilton as the primary point of contact, reachable at 808-587-1990 or alan.c.hilton@hawaii.gov. All work must be performed on Oahu, and interested parties can access further details through the provided state procurement portal.

Department of Transportation

POSTED

about 9 hours ago

DEADLINE

Concrete and Asphalt Crushing Services for Public WorksCherokee County Government in Georgia is seeking competitive sealed bids for Concrete and Asphalt Crushing Services to support Public Works operations. The solicitation, identified as PE-77123-NONST-2027-000000137, was posted on July 24, 2026, with a firm deadline for responses on August 25, 2026, at 3:00 PM. Services are expected to be performed within the state of Georgia, though specific locations are not detailed. The contract is open to all qualified bidders without a designated set-aside classification, and responses must be submitted in accordance with the County’s Purchasing Department requirements. All inquiries should be directed to Matthew Tully, the primary point of contact, reachable via email at mjtully@cherokeecountyga.gov or by phone at 678-493-6459. Additional information and official documentation can be accessed through the state procurement portal at the provided uiLink.

Cherokee County Government

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Monument Street Bridge Replacement Project NO.STP-7262-00(007)/109279-701000 Attached is Addendum Number 1, dated July 23, 2026 for the above referenced projectThe Monument Street Bridge Replacement Project, identified by NO.STP-7262-00(007)/109279-701000, is a public infrastructure initiative under the Mississippi Department of Transportation, solicited through the MPTAP agency. The solicitation, posted on July 24, 2026, requires responses by July 28, 2026, and includes Addendum Number 1 issued on July 23, 2026, which modifies or clarifies project requirements. The project is located in Mississippi and involves the full replacement of the existing Monument Street Bridge, likely addressing structural deficiencies, increasing capacity, or improving safety and compliance with current standards. No set-aside provisions are specified, and the work is open to qualified contractors without restrictions based on business size or category. All bids must respond to the updated terms in the addendum, and detailed information can be accessed via the official state contract portal.

POSTED

about 13 hours ago

DEADLINE

Separate sealed Bids will be received by the Montgomery County Board of Supervisors, for By-Pass (School) Road Overlay Project, Project No. 72-26, Montgomery County, Mississippi, until 8:30 A.M., Local Time, on Monday, August 31, 2026 , at MontgomeryMontgomery County in Mississippi is soliciting sealed bids for the By-Pass (School) Road Overlay Project, designated as Project No. 72-26, with all submissions due by 8:30 A.M. local time on Monday, August 31, 2026. The solicitation, issued under reference number 121-20260716135954 MCBS, was posted on July 24, 2026, and is managed by the Mississippi Department of Transportation through its agency MPTAP. Bids must be submitted in sealed envelopes to the Montgomery County Board of Supervisors at the designated location, and the project’s performance is limited to Montgomery County. This bid opportunity is intended for contractors qualified in roadway overlay work and is open to all eligible bidders without specified small business set-asides. Interested parties should access the official solicitation details via the provided online portal to review full technical specifications and requirements before the deadline.

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Sealed bids or electronic bids will be received by the Board of Supervisors of Lee County, Mississippi until 8:00 AM on the 17th day of August, 2026 and shortly thereafter publicly opened for the construction of 0.113 miles of BRIDGE AND APPROACHES on CRSealed or electronic bids are being solicited by the Board of Supervisors of Lee County, Mississippi for the construction of a 0.113-mile bridge and approaches on a county road, with all submissions due by 8:00 AM on August 17, 2026, followed by a public opening of bids shortly after. The solicitation, identified by number 78-20260724101508 BSLC, was posted on July 24, 2026, and is managed under the Mississippi Department of Transportation’s procurement system, with the work to be performed within Lee County in the state of Mississippi. Bidders must comply with the specified deadline and submission protocols to be considered, and no set-aside provisions or NAICS codes have been designated for this procurement, indicating open competition among qualified contractors.

POSTED

about 13 hours ago

DEADLINE

Separate sealed Bids will be received by the Montgomery County Board of Supervisors, for Fisher Road Full Depth Reclamation and Overlay Project, Project No. 74-26, Montgomery County, Mississippi, until 8:30 A.M., Local Time, on Monday, August 31, 2026Sealed bids are required for the Fisher Road Full Depth Reclamation and Overlay Project, designated as Project No. 74-26, located in Montgomery County, Mississippi. Bids must be submitted to the Montgomery County Board of Supervisors and received no later than 8:30 A.M. local time on Monday, August 31, 2026. The solicitation, issued under number 121-20260716140235 MCBS, was posted on July 24, 2026, and is managed by the Mississippi Department of Transportation’s Agency for Contract Management under the SLED classification. The work involves full depth reclamation followed by an overlay on Fisher Road, and all proposals must comply with the technical and procedural requirements outlined by the contracting authority. The project is anticipated to be executed entirely within Montgomery County, Mississippi, with no set-aside provisions specified. Interested parties should reference the official online portal for detailed specifications and submission guidelines.

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Sealed bids will be received by the Board of Supervisors of Jasper County in Bay Springs, Mississippi until 10:00 A.M., on Tuesday, September 8, 2026, and shortly thereafter publicly opened for the construction of 0.089 miles of BRIDGE & APPROACHES on tSealed bids are being solicited by the Board of Supervisors of Jasper County in Bay Springs, Mississippi for the construction of 0.089 miles of bridge and approaches, with bids due by 10:00 A.M. on Tuesday, September 8, 2026, and will be publicly opened immediately following the deadline. The solicitation, identified by number 169-20260715112018 BSJC, was posted on July 24, 2026, and is managed under the Mississippi Department of Transportation’s Program, with performance located entirely within the state of Mississippi. All submissions must be delivered to the designated location in Bay Springs, and no set-aside preferences or NAICS codes are specified. Bidders must ensure compliance with all terms outlined in the official solicitation, which can be accessed via the provided state government link.

POSTED

about 13 hours ago

DEADLINE

in about 2 months

The Board of Supervisors, Amite County, Mississippi, will receive bids for the construction of Bridge and Approaches along Robertson Road for a total project length of 0.312 miles, Federal Aid Project No. FLAP-0273-00(002)LPA/109369-701000 no later thanThe Board of Supervisors of Amite County, Mississippi, is soliciting bids for the construction of a bridge and approaches along Robertson Road, encompassing a total project length of 0.312 miles under Federal Aid Project No. FLAP-0273-00(002)LPA/109369-701000. The project is administered through the Mississippi Department of Transportation’s Federal Aid Program and is classified as a State, Local, and Education (SLED) procurement. Bids must be submitted no later than August 25, 2026, at 6:00 PM Central Time, with the solicitation officially posted on July 24, 2026. The work will involve the full construction of the bridge structure and associated road approaches, requiring compliance with all applicable federal and state transportation standards. Interested parties must review the official solicitation through the provided online portal to access detailed specifications, bid instructions, and evaluation criteria.

POSTED

about 13 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Commanding General

Same awarding agency

Logistics and Delivery Services (FOB Destination)The contract involves the transportation and final delivery of a mulcher attachment to Twenty-Nine Palms, California, under FOB Destination terms, meaning the supplier bears all costs and risks until the item is delivered to the specified location. This is a subcontract classified as a Total Small Business Set-Aside under the SBA program, ensuring only small businesses are eligible to compete. The North American Industry Classification System code 484220 indicates the scope relates to truck transportation of freight. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, at 4:00 PM, and is issued by the Department of Defense under the Commanding General. The place of performance is clearly defined as the zip code 92277 in Twentynine Palms, California, specifying the exact delivery point for the equipment. All responsibilities, including logistics planning, transit, and unloading, rest with the contractor until the mulcher attachment is successfully delivered and accepted at the destination.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

Coating and Corrosion Protection ApplicationThe contract titled Coating and Corrosion Protection Application is a small business set-aside solicitation under the NAICS code 332813, issued by the Department of Defense through the Commanding General. It seeks subcontractors to apply protective coatings including powder coat, epoxy, and thermal spray technologies to equipment and components exposed to harsh field conditions, with the primary goal of preventing rust and mitigating wear. The work is specifically performance-based and must be carried out at the designated location in Twentynine Palms, California, with a zip code of 92277. All interested parties must submit responses by the deadline of July 29, 2026, at 4:00 PM Eastern Time, and only small businesses certified under the SBA’s total small business set-aside program are eligible to bid. The solicitation was posted on July 24, 2026, and is intended to support defense operations by ensuring the longevity and reliability of critical assets under demanding environmental conditions.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 19 hours ago

DEADLINE

Steel Fabrication and Welding ServicesThe contract involves custom steel fabrication services for critical components including mulcher housings, cutting drums, and mounting frames, with an emphasis on precision welding to ensure compliance with high durability and performance standards required for heavy-duty operational environments. All work must adhere to strict quality and structural integrity benchmarks suitable for military-grade equipment usage. This is a total small business set-aside subcontract under NAICS code 332312, open exclusively to small businesses as defined by the SBA, and is managed by the Department of Defense under the Commanding General. The solicitation was posted on July 24, 2026, with a firm deadline for responses on July 29, 2026, at 4:00 PM. Performance will take place in Twentynine Palms, California, with zip code 92277, and the contract is intended to support defense-related equipment needs through specialized fabrication capabilities.

Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

Hydraulic System Integration and TestingThe contract pertains to the integration of a mulcher with hydraulic systems, requiring comprehensive flow compatibility testing, precise pressure calibration, and full performance validation to ensure operational reliability under field conditions. The work must be performed at Twentynine Palms, California, with all technical activities aligned to meet military-grade standards for equipment functionality and safety. The contractor is expected to demonstrate proven expertise in hydraulic system design and field testing, with deliverables focused on verified performance metrics and documented test results. This is a total small business set-aside under the SBA program, classified under NAICS code 332994, and structured as a subcontract within the Department of Defense acquisition framework. The opportunity was posted on July 24, 2026, with responses due by July 29, 2026, allowing a five-day window for qualified small businesses to submit proposals. The commanding general's office is managing the solicitation, and while no point of contact is listed, submissions must adhere strictly to the deadline and performance requirements outlined in the solicitation context. All work must comply with federal contracting regulations and be executed within the specified geographic location.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

Hydraulic Mulcher Attachment ManufacturingThe contract requires the fabrication and assembly of a heavy-duty mulcher attachment designed for forestry and land-clearing operations, with specific hydraulic integration requirements to ensure seamless compatibility with standard heavy equipment platforms. The component must be engineered for durability under extreme operational conditions, incorporating robust materials and precise hydraulic system interfaces to deliver consistent performance in austere environments. All manufacturing must adhere to military-grade standards for reliability, safety, and long-term field functionality. This is a total small business set-aside under the SBA program, classified under NAICS code 333111 for construction machinery manufacturing, and is issued as a subcontract by the Department of Defense under the Commanding General. The opportunity was posted on July 24, 2026, with responses due by July 29, 2026, and the work is to be performed at Twentynine Palms, California, 92277. The procurement is intended exclusively for small businesses, emphasizing localized industrial capacity and compliance with federal subcontracting guidelines for defense-related equipment.

Farm Machinery and Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

EMERGENCY MEALSThe Regional Contracting Office MCI-WEST is conducting market research through a Request for Information to identify qualified contractors capable of providing emergency meal services to fire departments at Marine Corps Base Camp Pendleton and Marine Corps Air Station Miramar. The requirement centers on the delivery of sack lunches, hot meals, water, electrolyte drinks, bags of ice, and refrigerated transport via 16-foot trucks, with delivery expected within four hours of order placement and a 15-minute response time. The work will be conducted under an Indefinite Delivery/Indefinite Quantity (IDIQ) contract, with one base year and four one-year options, and the North American Industry Classification System code is 311991 with a 500-employee size standard. This is a total small business set-aside under FAR 19.5, and respondents must confirm their eligibility under applicable socioeconomic categories such as 8(a), HUBZone, or SDVOSB status. All submissions must include the company’s DUNS number, CAGE code, a statement of socio-economic certification, confirmation of compliance with the Performance Work Statement, and proof of recent experience delivering similar emergency meals to first responders within the past three years, including contract numbers and values. Responses must be submitted electronically via email to gary.lane@usmc.mil no later than 11:00 AM PST on August 7, 2026, and are strictly for market research purposes—not constituting offers or binding proposals. The Government will not pay for submissions or notify respondents of evaluations. Meal specifications include heavy-duty paper sacks with color differentiation for vegetarian and regular meals, individual packaging of all snacks and condiments in factory-sealed packets, and strict labeling of preparation and consumption times. Packaging must use cardboard boxes holding exactly 10 meals, prohibit Styrofoam, and comply with FDA Title 21 CFR Part 110 for sanitary practices. Meals must be consumed within 24 hours of preparation unless otherwise authorized. Delivery tickets require two signed copies submitted within one business day, and the Government does not cover mileage costs. No formal pricing, contract clauses, evaluation factors, or payment details are included, as this RFI is solely for gathering industry capabilities to inform future procurement actions. Technical oversight and contracting officer roles remain TBD, with Gary Lane serving as the primary point of contact for submissions.

Perishable Prepared Food Manufacturing

POSTED

about 19 hours ago

DEADLINE

Mulcher AttachmentThe contract is for a mulcher attachment compatible with the 2026 John Deere MH60, solicited under number M0068126Q0058 with a posting date of July 24, 2026, and a response deadline of July 29, 2026. This solicitation is a total small business set-aside under the Small Business Administration, classified under NAICS code 333924, which pertains to other farm machinery and equipment manufacturing. The procuring entity is the Department of Defense, specifically the Office of the Commanding General, located at Camp Pendleton, California, with the primary point of contact being Gabriel Lopez and secondary contact Marcus Schnars, both reachable through marcusschnars@usmc.mil. The equipment is intended for delivery to the place of performance in Twentynine Palms, California, 92277, where it will support operational needs. The contract is accessible via the SAM.gov portal for interested small business vendors.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Structural Steel Fabrication and ErectionThe contract is for the fabrication and on-site assembly of structural steel components including frames, beams, columns, and connections, under a total small business set-aside designation. It is classified under NAICS code 332312 for structural metal fabrication and is specifically reserved for small businesses as defined by the SBA. The work will be performed at Cherry Point, North Carolina, with a response deadline of August 11, 2026, and the solicitation was posted on July 23, 2026. The contracting entity is the Department of Defense under the Commanding General, and the nature of the agreement is a subcontract. All work must comply with federal procurement regulations and be executed by a qualified small business concern meeting SBA standards.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ready-Mix Concrete SupplyThe contract pertains to the supply of ready-mix concrete for a project located in Cherry Point, North Carolina, with specific technical requirements including defined slump and strength parameters, as well as a strict delivery schedule to ensure timely progress on-site. The procurement is structured as a subcontract under a total small business set-aside designation, meaning only small businesses certified by the Small Business Administration are eligible to compete, in accordance with FAR 19.5. The North American Industry Classification System code 327320 identifies the work as concrete product manufacturing, reinforcing the focus on concrete production and delivery capabilities. The solicitation was posted on July 23, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense under the Commanding General, indicating this is a defense-related construction effort requiring precise material specifications and reliable logistics.

Ready-Mix Concrete Manufacturing

POSTED

DEADLINE

Heavy Haul and Equipment TransportThe contract is for the heavy haul and equipment transport of oversized construction equipment, materials, and components to and from the Cherry Point location with zip code 28533, under a subcontract arrangement. It is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small business concerns are eligible to compete, and it is classified under NAICS code 484220, which pertains to specialized freight trucking. The opportunity was posted on July 23, 2026, with a response deadline of August 11, 2026, at 3:00 PM. The contracting activity is managed by the Commanding General under the Department of Defense, and performance is required at the specified site in Cherry Point. All transportation services must adhere to the requirements for moving heavy and oversized loads, including compliance with safety, permitting, scheduling, and logistical standards necessary for defense-related operations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Environmental Compliance and MonitoringThe contract titled Environmental Compliance and Monitoring is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with a NAICS code of 541620 for environmental consulting services. It requires the contractor to perform stormwater management, erosion control inspections, and regulatory compliance reporting throughout the construction phase, ensuring adherence to environmental standards during project execution. All work must be carried out at the place of performance in Cherry Point, North Carolina, with a zip code of 28533, under the oversight of the Department of Defense through the Commanding General. The solicitation was posted on July 23, 2026, and proposals must be submitted by August 11, 2026, at 3:00 PM Eastern Time, with no designated point of contact provided in the posting. The contract is accessible via the SAM.gov platform for interested small business entities seeking to bid on this federal environmental compliance opportunity.

Environmental Consulting Services

POSTED

DEADLINE

Surveying and Site LayoutThe contract titled Surveying and Site Layout is a subcontract set aside entirely for small businesses under the SBA Total Small Business Set-Aside program, classified under NAICS code 541370 for surveying services. It requires the performance of topographic surveys, accurate boundary determination, and precise layout of structures and infrastructure elements, ensuring alignment with project design specifications. The work is to be performed at Cherry Point, North Carolina, with a response deadline of August 11, 2026, and the opportunity was posted on July 23, 2026. The contracting activity is under the Department of Defense, specifically the Commanding General, though no point of contact or detailed address information is provided. All work must comply with federal regulations governing small business set-asides, and qualified vendors must submit proposals by the stated deadline to be considered.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE