Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Road Blading and Grading Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for routine grading and blading of unpaved forest roads using motor graders to maintain proper drainage, eliminate ruts, and ensure safe passage, with specific tasks including shaping road crowns and shoulders. The work is tied to the Hot Springs National Park location in Arkansas and is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA. The NAICS code 237310 confirms the scope aligns with highway and street construction services. The solicitation was posted on July 22, 2026, with responses due by August 10, 2026, and the contract is managed under the USDA Forest Service through the CSA East 2 office. All work must be performed at the designated place of performance, and the project is part of the Department of Agriculture’s infrastructure maintenance efforts in national forest areas.

General Info

Small business subcontract for forest road grading and blading in Hot Springs National Park, Arkansas, under USDA Forest Service.

Agency

Department Of Agriculture → Csa East 2 Usda-FsView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Hot Springs National Park, AR, 71901, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Agriculture → Csa East 2 Usda-Fs
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Agriculture → Csa East 2 Usda-Fs
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform routine grading of unpaved forest roads using motor graders to maintain drainage, remove ruts, and ensure safe通行. Includes shaping road crowns and shoulders.

Similar Contracts

Same NAICS industry code

NAICS: 237310
New
SLED
Fleet Fast EV Charging - ConstructionThe Port of Seattle’s Aviation Project Management Group is forecasting a construction contract for fleet fast electric vehicle (EV) charging infrastructure, targeting NAICS code 237310, which pertains to commercial and institutional building construction. The solicitation is scheduled to be released in July 2026, with no set-aside preferences indicated, and interested parties should prepare for a competitive procurement process. The project requires the installation and commissioning of high-speed EV charging systems specifically for fleet vehicles operating at Port facilities, with the work expected to occur at locations under the Port’s jurisdiction, though exact sites have not been specified yet. Primary point of contact for the opportunity is Angela Peterson, reachable via email or phone, with Katie Techa serving as the project manager for technical coordination. Although no formal solicitation number or detailed scope has been published, bidders should anticipate requirements related to electrical upgrades, site preparation, equipment procurement, compliance with safety and accessibility standards, and integration with the Port’s existing energy and fleet management systems. Prospective contractors are encouraged to monitor the official portal link for updates as the solicitation nears release, ensuring alignment with anticipated timelines and technical specifications.
Aviation Project Management Group

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 237310
New
SLED
Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will comprehensively upgrade the entry and exit drives along 19th Avenue West, the footprint of the existing Downie Building C-14, and surrounding parking areas. The project includes milling and overlaying deteriorated pavement, replacing and expanding stormwater infrastructure to divert runoff from the combined sewer system to dedicated storm lines, with water quality treatment integrated where qualifying pavement surfaces are replaced. The remaining slab of the C-14 building will be demolished and replaced with a mix of new parking spaces and green areas designed as pollinator habitats, potentially incorporating a stormwater treatment facility. A new irrigation system will support the landscaping, which extends to the median within the entry drive. Electric vehicle charging stations will be installed in the newly configured parking zone. Additional improvements include the installation of a protected two-way bike lane linking the terminal’s entrance to the existing West Wall bike path, enhanced pedestrian connections to the intersection of 21st Avenue West and W Emerson Place, and improved access to the King County Metro bus stop. Lighting will be upgraded throughout the new parking area and along the pedestrian and bicycle routes. Wayfinding signage will be added to guide foot and bicycle traffic. All work is scoped under NAICS code 237310 and managed by the Port of Seattle’s Waterfront Project Management team, with Mike Van Cleve and Terrence Moody serving as primary point of contact and project manager respectively.
Waterfront Project Management

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 237310
New
SLED
Asphalt Paving & Striping Portwide Unit Price 2026The contract encompasses a broad range of pavement and infrastructure maintenance activities to be conducted across multiple locations within the Seattle-Tacoma International Airport, Maritime Properties, and adjacent areas. Work includes new asphalt paving and patching, asphalt overlays with fabric, crack sealing, seal coating, profile grinding, disposal of grinding spoils, removal of existing striping, surface preparation for new markings, various stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, lifting and leveling of concrete sidewalks, and upgrades to road water drainage systems, which may require permitting. All tasks are to be performed under a unit price structure for fiscal year 2026, ensuring flexibility in scope based on actual site needs. The contract is managed by the Port of Seattle through its Port Construction Services division, with primary point of contact Heather Bowden and Project Manager Lesley Miles available for coordination. Work will occur across various Port-wide sites, requiring logistical planning and coordination with airport and maritime operations. The NAICS code 237310 confirms the focus on highway, street, and bridge construction services. No solicitation number has been assigned yet, and the contract is currently listed as a forecast, indicating it is a planning notice for future procurement rather than an active bid opportunity. All activities must comply with safety, environmental, and operational standards applicable to airport and maritime facilities.
Port Construction Services

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 237310
New
SLED
VARIOUS PAVING FY26The City of Ringgold is soliciting bids for various paving projects under solicitation number PE-62351-NONST-2026-000000026, with bids due by September 7, 2026. All bidders must be pre-qualified with the Georgia Department of Transportation and subcontractors must also be registered with GDOT. Proposals must be submitted in sealed, opaque envelopes clearly labeled with the company name and the words “Paving Bid,” and any deviation from this labeling will result in the bid being returned unopened. Bids must be typed or written in ink and delivered either by mail to P.O. Box 579, Ringgold, GA 30736, or in person to City Hall at 150 Tennessee St., Ringgold, GA. The award will not necessarily go to the lowest bidder; instead, the City will select the best responsible bidder based on quality of materials, conformity with specifications, suitability to requirements, bidder experience, and delivery terms. Contractors are required to provide all labor, equipment, and materials for the project, including full traffic control, and must submit performance and payment bonds upon contract execution. All contractors must maintain adequate workers’ compensation and general liability insurance and comply with the City’s drug-free workplace policy. The place of performance is within the State of Georgia, though specific job locations are not detailed. No FAR clauses or federal accounting identifiers are referenced, and the procurement operates under local municipal procedures only. No electronic submissions are accepted, and no contract value or detailed performance schedule is provided in the solicitation materials.
City of Ringgold

POSTED

about 13 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Agriculture → Csa East 2 Usda-Fs

Same awarding agency

NAICS: 237310
New
Federal
Road Maintenance for the Ouachita National ForestThe U.S. Department of Agriculture, through its Office of the Forest Service, is soliciting quotations for Road Maintenance Services within the Ouachita National Forest under solicitation number 12444026Q0146. This is a combined synopsis and solicitation issued pursuant to FAR Part 12 for commercial items, with no separate written solicitation to follow. The acquisition is a Total Small Business Set-Aside, exclusively reserved for small business concerns as defined by the North American Industry Classification System code 237310, which applies to Heavy and Civil Engineering Construction, and carries a size standard of $45 million in annual receipts. Only responsible small business entities may submit quotations, and all responses will be evaluated under this set-aside framework. The solicitation was posted on July 22, 2026, with quotations due by 9:00 PM Eastern Time on August 10, 2026. Performance of the work is required in and around Hot Springs National Park, Arkansas, with a zip code of 71901, and all contractual obligations will be managed by the CSA East 2 office located in Atlanta, Georgia. The primary point of contact for inquiries is Melody Flores, reachable via email at melody.flores@usda.gov or by phone at 606-371-5634. This opportunity is publicly accessible through the SAM.gov website, and interested vendors are encouraged to review all requirements and submit their quotations prior to the deadline to be considered for award.
Highway, Street, and Bridge Construction

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 811310
Federal
Gate Motor Replacement for Kisatchie National Forest, LAThe contract is for the replacement of the existing automatic slide gate operator and associated safety devices at the Kisatchie National Forest Supervisor’s Office in Pineville, Louisiana, under solicitation number 12444026Q0141 issued by the USDA Forest Service. The work encompasses full removal and disposal of the outdated system, installation of all new commercial-grade components including a gate operator, controller, photoelectric safety beam, safety edge, and UL-listed surge protective device, along with commissioning, testing, owner training, and full system certification. All materials must be new, defect-free, and sourced from the original equipment manufacturer with full traceability documented through a clear, auditable paper trail. The contractor must furnish both a manufacturer’s certificate of conformance and their own certificate of conformance, ensure system reliability through ten consecutive operating cycles, and provide a minimum one-year workmanship warranty alongside the manufacturer’s standard equipment warranty. Performance must be completed within thirty calendar days of the Notice to Proceed, with delivery terms designated as F.O.B. Origin, though offers are treated as F.O.B. Destination unless shipping costs are explicitly included and F.O.B. Origin is declared. This is a total small business set-aside as defined under FAR 19.5 and is restricted to small businesses with an active SAM.gov UEI number required for eligibility. The acquisition incorporates a comprehensive suite of FAR clauses including 52.212-4 for commercial services terms, 52.246-15 for certification of conformance, 52.232-29 through 52.232-36 for payment terms under commercial purchasing, and multiple security and compliance requirements including 52.240-92 and 52.240-93 for information systems safeguarding, 52.222-50 and 52.222-56 for combating trafficking in persons, and 52.225-1 and 52.225-2 for Buy American compliance. The contractor must also adhere to anti-discrimination laws, maintain ethical conduct, and be free from debarment or suspension. Offers must be submitted no later than August 2, 2026 at 9:00 a.m. ET, must include full pricing for all required line items, and must demonstrate the ability to meet performance schedules. Pricing must remain firm for 90 days
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

9 days ago

DEADLINE

in 10 days
View Details