Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Roofing and Waterproofing

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the installation of a low-slope membrane roofing system along with associated flashings and waterproofing measures to ensure integrity at all penetrations and edges. This work is focused on creating a durable, watertight roof assembly and requires specialized techniques to properly seal joints, terminations, and through-penetrations to prevent water intrusion. The scope includes all necessary materials and labor to complete the roofing and waterproofing to meet applicable industry standards and performance requirements. The opportunity is posted as a subcontract under NAICS code 238160 and is open for responses until August 11, 2026. The contracting entity is the State of Utah, though no specific location or office address is provided for the project or point of contact. Interested parties must submit their proposals through the designated online portal by the stated deadline, with no set-aside designation indicated for small or disadvantaged businesses. All work is expected to be performed in compliance with the technical and contractual obligations outlined in the solicitation.

General Info

Install low-slope membrane roofing with waterproofing by August 11, 2026, for State of Utah.

Agency

NAICS

238160 - Roofing ContractorsView NAICS

Place of Performance

UT, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyUtah
ContactsNo contacts available
OfficeN/A
Organization / Agency
Utah
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of low-slope membrane roofing and flashings, including waterproofing of penetrations and edges.

Similar Contracts

Same NAICS industry code

NAICS: 238160
New
SLED
Pier 69 Third Floor Terrace RepairThe project involves the full demolition of the existing roof system on the third floor east terrace at Pier 69, including removal of pavers, drainage mat, and waterproof membrane. A new roof system will be installed using a pedestal system with thinner pavers designed to improve drainage performance and ensure long-term functionality. A critical component of the work is the construction and installation of a barrier wall around the structural steel beams that support the roof panels, aimed at preventing future corrosion and extending the lifespan of the underlying infrastructure. All materials, including planters and debris, will be removed and reinstalled using a crane due to the weight and scale of the elements involved. The work is being managed by the Port of Seattle through its Waterfront Project Management office, with Todd Rehm listed as the primary point of contact and Samuel Hansen as the project manager. The North American Industry Classification System code 238160 indicates this is a roofing contract, and while no solicitation number has been assigned yet, the forecast was posted on July 29, 2026. The location of the work is clearly defined as Pier 69, though specific city or state details are not provided in the data. All contractors bidding on this opportunity must be prepared to handle the technical demands of roof system replacement, corrosion protection, and crane-assisted material handling on an active waterfront site.
Waterfront Project Management

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 238160
New
SLED
McClure MS Roof Replacement, B27025
Solicitation # PE-63310-NONST-2027-000000218
The contract involves a full roof replacement at McClure Middle School in Georgia, requiring the complete removal of all existing granular surfaced modified bitumen membranes, insulation, flashings, and trim down to the structural metal deck. A new insulated modified bitumen roofing system will be installed, including deck boards, vapor barriers, insulation, tapered insulation and crickets where needed, cover boards, and multiple-ply modified bitumen roofing with full flashings. All sheet metal components such as coping, gutters, leaders, expansion joints, and associated flashings must be removed and replaced. Roof drains will be removed and replaced with new units including overflow drain bowls. Rooftop mechanical units will be disconnected, relocated to new curbs or rails, and reconnected to ensure a minimum 14-foot high base flashing above the finished roof surface. Roof hatches, access ladders, and all roof-to-roof ladders will be removed and replaced with crossover ship ladders as specified in the drawings. The scope covers all low-sloped roofing areas and must comply with all applicable building codes and standards. The solicitation number is PE-63310-NONST-2027-000000218, issued by the Cobb County Board of Education, with proposals due by September 1, 2026, and points of contact listed under Wendy Bell for inquiries.
Cobb County Board of Education

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238160
New
SLED
MIL DEPT - AASF Operations Flat Roof Replacement
Solicitation # 73999
Contractors are invited to submit bids for the replacement of the flat roof over the Flight Operations section at the Army Aviation Support Facility located at 141 Shamrock Road in South Burlington, Vermont. The scope of work requires full-depth reconstruction down to the decking, including installation of a new substrate, drain bodies, insulation, and a TPO membrane to ensure a durable, weatherproof system. The project is part of a broader effort to maintain facility integrity and operational readiness, with all work expected to meet high standards for performance and longevity in a demanding military environment. The solicitation is open under the state-level agency designation, with the Vermont Department of Economic Development serving as the overseeing entity. Bids must be submitted by September 4, 2026, at 6:00 AM Eastern Time, following the posting of the solicitation on July 29, 2026. The opportunity is identified by solicitation number 73999 and can be accessed via the Vermont Business Registry’s online portal. The primary point of contact for questions or additional information is Ryan Farina, reachable by phone at 802-735-4554 or via email at ryan.farina@partner.vermont.gov. There is no set-aside designation specified, and the NAICS code is not provided, but the project is classified under state and local government (SLED) procurement and is performed entirely in Vermont. All potential bidders are expected to thoroughly review the full solicitation documents for detailed technical specifications, compliance requirements, and submission guidelines.
Department of Economic Development

POSTED

1 day ago

DEADLINE

in about 1 month
View Details

More opportunities from Utah

Same awarding agency

NAICS: 332439
New
SLED
Steel Skid Design and ManufacturingThe contract seeks the design and fabrication of a structural steel skid specifically engineered to support a modular shelter, ensuring it meets exacting load ratings and dimensional constraints necessary for safe transportation and reliable field deployment. The skid must be robustly constructed to withstand the rigors of transport and variable environmental conditions while maintaining structural integrity under anticipated operational loads. All design elements must align with industry standards for heavy-duty steel fabrication, with attention to weld integrity, material grade specifications, and compliance with transportation regulations for mobility and handling. Submission is open under a subcontract classification with a response deadline of August 5, 2026, and the opportunity is categorized under NAICS code 332439, indicating a focus on other structural metal product manufacturing. The contract is administered by the state of Utah, with no specific agency or office details provided beyond the organizational name. Interested parties must respond through the designated BonfireHub portal, and all proposals must demonstrate proven capability in structural steel fabrication, adherence to technical specifications, and readiness for timely execution. There is no set-aside designation indicated, meaning the contract is open to all qualified contractors regardless of size or business type.
Other Metal Container Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 332311
New
SLED
Modular Radio Communications Shelter Design and FabricationThe contract calls for the design, engineering, and fabrication of a modular radio communications shelter that must be engineered for complete disassembly, efficient palletization, and secure shipping to enable field assembly by Utah National Guard personnel without any vendor support. The shelter must be constructed using standardized components and clear, self-explanatory assembly instructions to ensure operational readiness in austere environments where technical assistance is unavailable. All materials, fasteners, and structural elements must withstand harsh field conditions while maintaining signal integrity and environmental protection for critical communication equipment. The project is classified as a subcontract under NAICS code 332311 and is open for responses until August 5, 2026, with a submission deadline of 9:00 PM local time. The performance location is unspecified but will require the final assembled shelter to be deployed in Utah’s operational areas. The Utah agency, acting through its designated procurement channel, seeks a solution that prioritizes ruggedness, modularity, and ease of field assembly over convenience or cost savings. Bidders must demonstrate experience in military-grade enclosure design and logistics planning for remote deployment, ensuring that every component can be handled by non-specialist personnel using basic tools and following documented procedures.
Prefabricated Metal Building and Component Manufacturing

POSTED

2 days ago

DEADLINE

in 6 days
View Details