Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from California was posted on June 12, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Roofing System Installation

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 2 hours ago

DEADLINE

in 8 days

AI Contract Overview

Show more

The contract involves the installation of a low-slope membrane roofing system which includes the application of insulation, a vapor barrier, and flashing components. The work is to be performed as a subcontract under the High Speed Rail Authority of California, with the place of performance specified as Fresno. The contract is categorized under NAICS code 238160, indicating it falls within the roofing contractors industry. The solicitation for this roofing system installation was posted on June 12, 2026, and proposals are due by July 1, 2026. While specific details such as the solicitation number, office address, and point of contact are not provided, the contract opportunity is accessible via the California procurement portal. This project supports the construction efforts associated with the High Speed Rail initiative, highlighting the importance of quality roofing installation in infrastructure development.

General Info

Subcontract for Fresno low-slope roofing installation with insulation, vapor barrier, due July 1, 2026.

Place of Performance

Fresno, CA, USA

Set-Aside

NONE

Documents

This scope was carved out of HSR26-03.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

HSR26-03 - As-Needed Office Moving, Storage Services and Freestanding Modular Systems Furniture Reconfiguration

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyCalifornia → High Speed Rail Authority
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of low-slope membrane roofing system including insulation, vapor barrier, and flashing.

More opportunities from California → High Speed Rail Authority

Same awarding agency

NAICS: 541350
New
SLED
HSR26-26 Re-Bid #2 Fresno Building Inspection
Solicitation # 0000040755
The California High-Speed Rail Authority is seeking an experienced contractor for solicitation 0000040755 to provide comprehensive on-site building inspection services for the Fresno Office located at 1111 H Street, Fresno, CA. The scope of work requires a detailed evaluation of all major building systems, including plumbing, sewer, drainage, electrical, HVAC, roofing, building envelope, life-safety, and visible structural components. The selected contractor must assess these systems for condition, functionality, safety, regulatory compliance, and potential risks, applying current federal, state, and local building codes. Key deliverables include a comprehensive written inspection report with supporting photographs, a prioritized list of corrective actions, rough order-of-magnitude cost estimates for repairs, and participation in a formal review meeting. Bids are due by November 6, 2026, at 2:00 PM. To be eligible, bidders must possess a valid Class A or Class B license from the California Contractors State License Board. The contract will be awarded to the lowest responsive and responsible bidder, with a 3% to 5% incentive applied for Disabled Veteran Business Enterprise participation. Required submission documents include a bidder certification sheet, cost sheet, payee data record, and certifications regarding the Darfur Contracting Act and organizational conflicts of interest. Once awarded, the contractor must provide a draft report within ten business days of completing on-site work and a final report within five business days of receiving feedback. Invoices are to be submitted electronically on a monthly basis to the Authority's Financial Office in Sacramento.
Building Inspection Services

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 238910
SLED
Re-Bid HSR26-24 Clearance and Demolition Services at 16608 8th Avenue, Hanford, CA 93230
Solicitation # HSR26-24
The California High-Speed Rail Authority is soliciting bids for Right-of-Way clearance and demolition services at 16608 8th Avenue, Hanford, CA. The project involves the demolition and removal of a 1,390 square foot single family home and a 672 square foot garage. The scope of work includes the removal of all structures, foundations, and debris, as well as the testing and abatement of lead paint and both friable and non-friable asbestos. Additional requirements include capping sewer lines, site restoration through discing and backfilling, and the implementation of a Storm Water Pollution Prevention Plan or Water Pollution Control Program. The contract term is scheduled from December 1, 2026, through November 30, 2027, with a possible 12-month extension. Bidders must possess specific licenses and certifications, including Class A or Class B and C-21 licenses, C-22 or ASB certification, a C-57 well-drilling license, and a HAZ certificate for hazardous substance removal. Required submissions include a bid bond, and performance and payment bonds are mandatory if the bid exceeds 10,000 and 25,000 dollars, respectively. The award will be based on the lowest responsive and responsible bid, with preferences provided for certified Small Businesses, Microbusinesses, and Disabled Veteran Business Enterprises. All bids must be submitted in a sealed envelope, printed single-sided without binders, and delivered by October 28, 2026, at 3:00 PM.
Site Preparation Contractors

POSTED

18 days ago

DEADLINE

in 3 days
View Details
NAICS: 331420
SLED
HSR26-28 Invitation for Bids for Copper Conductors
Solicitation # HSR26-28
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-28 for the procurement of OCS Copper Conductors required for the First Construction Segment of its high-speed rail track. The scope of work involves supplying high-conductivity 150mm2 Copper Tin contact wire and 65mm2 Bz catenary messenger wire for the SNCF S220 OCS system. All materials must be Buy America compliant per 49 U.S.C. 22905 and adhere to specific international standards, including EN 50149, IEC 63190, EN 50182, and EN 50326. The contractor is responsible for the direct handoff of materials to the Authority's onsite contractor at railheads located in Kern and Fresno Counties. The contract will be awarded to the lowest responsible responsive bidder based on the total contract bid price for years one through three. Bids are due by November 13, 2026, at 12:00 PM PST and must include a bid bond equal to 10 percent of the total bid amount. Submission requirements are strict, requiring a hard copy bid form in a separately sealed envelope, along with a comprehensive bid package submitted both in hard copy and as a single searchable PDF. Bidders must also certify compliance with various state and federal requirements, including non-discrimination, lobbying, and small business goals, specifically targeting 25 percent for small businesses and 3 percent for disabled veteran business enterprises. Contract administration includes electronic monthly invoicing and a requirement for the contractor to submit a detailed delivery plan within 30 days of the Notice to Proceed. Quality assurance is managed through inspections at the place of production and final acceptance testing at the destination. Any products failing random sample reviews will result in a Non-Conformance Report requiring a root cause analysis and corrective action plan. All shipments must follow rigorous packaging and marking standards, including detailed packing sheets and suitable containers to ensure safe transport.
Copper Rolling, Drawing, Extruding, and Alloying

POSTED

20 days ago

DEADLINE

in 19 days
View Details
NAICS: 335929
SLED
HSR26-39 Invitation for Bids for Aluminum Conductors
Solicitation # HSR26-39
The California High-Speed Rail Authority has issued Invitation for Bids HSR26-39 for the procurement of Overhead Contact Systems (OCS) Aluminum Conductors to support the First Construction Segment of its high-speed rail track. The scope of work requires the manufacture and delivery of a complete portfolio of conductors based on the SNCF S220 OCS system, specifically 217,754 meters of Aluminum-Steel static/ground/earth wire (93.3mm2) and 214,334 meters of Aluminum-Steel auxiliary/feeder wire (288mm2). Materials must be delivered to railheads in Kern County (Wasco) and Fresno County, with the contractor providing a direct handoff to the Authority's onsite contractor. The contract will be awarded to the lowest responsible responsive bidder based on the total bid price. Bids are due by November 19, 2026, at 12:00 PM PST and must include a bid bond equal to 10 percent of the total bid amount. Submissions require a hard copy bid form in a separately sealed envelope, along with both hard copy and electronic versions of the remaining bid package. Key compliance requirements include strict adherence to Buy America standards per 49 U.S.C. 22905, various European (EN) standards for conductors, and ASNT certification for non-destructive testing personnel. Additionally, contractors must comply with the California Prompt Payment Act, which mandates payment of undisputed invoices within 45 days. Bidders must also provide certifications regarding small business status, DVBE/DBE participation, and disclosure of any organizational conflicts of interest or use of generative artificial intelligence.
Other Communication and Energy Wire Manufacturing

POSTED

20 days ago

DEADLINE

in 25 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS