Rotating Files

SALES TAX EXEMPTION: The Contractor is hereby advised that the United States Government and Agencies thereof are exempt from State and Local Government tax by virtue of Article 6 of the United States Constitution. No exemption certificate is required. - 1.0 INTRODUCTION The Naval Surface Warfare Center (NSWC), Corona Division, Contracts Department, Code 02, requires rotating file cabinets to be purchased and installed in their file room (Room 106B) with all the accessories, auxiliary equipment, space design, labor, management, supervision, material, tools, transportation, unloading of material at the project site, and incidental related work supplies and services necessary to provide fully functioning storage systems for information and materials management complete and ready for use. - 2.0 BACKGROUND Building 523 has a requirement to purchase and install rotating file cabinets. In order to meet this requirements, labor, management, material, tools, transportation, and etc. items are required to meet requirement. 3.0 SPECIFICATIONS 3.1 Location/Delivery: Work shall take place in building 523, room 106B, at the Naval Surface Warfare Center, Corona Division, 1999 4th Street, Norco, CA 92860. 3.2 Term of the Contract/ Completion and Acceptance: - a. Commence work/procurement of material/equipment 5 days after the date the vendor receives notice of award, - b. Prosecute and complete the entire acquisition, delivery and installation no later than 90 calendar days after award. - c. The time slated for completion shall include receipt and acceptance by the Government. Note that there is a 2 week Base Access time for all employees to gain access on the base. This must be incorporated into the lead times for installation. 3.3 Design Assistance: Contractor shall provide development of appropriate solutions for space and productivity. Design layout shall be submitted for approval. The layout provided is for estimate purposes only and shows items which are Not In Contract (NIC), such as existing file cabinets. 3.4 Installation and Service: Provide service and expert installations by trained technicians with factory trained experience. 3.5 Warranty: All of the system equipment and related parts shall carry a five year warranty against defects in material or workmanship. This warranty shall cover the standard terms and conditions. 3.6 Product Description: Design per attached drawing all required parts to make a complete and usable unit. Parts list below is based on past contract and other items may be required, such as bolts to secure to floor or wall, that are not listed in below required parts. Contractor shall have a full and complete understanding as well as design of how required product functions. Minimal requirement includes install one (1) 7-plus starter and three (3) add-on rotary filing cabinet systems with closure at both ends. Storage cabinets shall be designed to accommodate approximately 1680 linear filing inches. Color shall be selected from Neutral Cast color chart. The bottom five (5) shelves on all drawers shall be roll out shelves and the top two (2) shall be fixed with all required accessories. All file cabinets shall also be equipped with a pull-out reference shelve. In addition there shall be a minimum of one magnetic divider per shelf (7 on each side, 2 sides, 4 cabinets and 10 additional to be placed where required). File system shall be lockable (8 locks). A table, approximate size 3' long x 18" wide, with one (1) black ergonomic chairs shall be placed in room to allow for viewing of files and a computer. Placement of table in relation to file cabinets will be noted to meet ABA accessibility requirements, see drawing for additional information. Qty Brand Part Description 1 KI/Spacesaver 7 Tier Plus Size Starter Letter Size, Empty 3 KI/Spacesaver 7 Tier Plus Size Add-On Letter Size, Empty 40 KI/Spacesaver Roll Out Drawers (5 per cabinet, 2 sides, 4 cabinets) 80 KI/Spacesaver End Support for Roll out Drawer (5/cabinet, 2 sides, 2/ Drawer, 4 cabinets) 66 KI/Spacesaver Standard Magnetic Divider (7 shelves, 2 sides, 4 cabinets, 10 extra) 16 KI/Spacesaver Slotted Adjustable Shelf (2/cabinet, 2 sides, 4 cabinets) 8 KI/Spacesaver Roll out Reference Shelf (1/Cabinet, 2 sides, 4 cabinets) 2 KI/Spacesaver End Strip for final cabinets 19 KI/Spacesaver Letter Size Drawer Divider Pkg 3 (7 shelves, 2 sides, 4 cabinets & 3 package) 1 KI/Spacesaver Table per dimensions 1 KI/Spacesaver Ergonomic Chair 1 KI/Spacesaver Space Design, Site Prep, Set-up, Install, Delivery Vendor must include catalogue or brochure with images of items requested. Must be Brand Name or equal. 4.0 REQUIRED DELIVERY DATE: 90 Days after award. 5.0 SHIPPING ADDRESS: NSWC Corona Division Attn: Building 523 1999 Fourth Street Norco, CA 92860 252.232-7006 WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JUN 2012) (a) Definitions. As used in this clause-- Department of Defense Activity Address Code (DoDAAC) is a six position code that uniquely identifies a unit, activity, or organization. Document type means the type of payment request or receiving report available for creation in Wide Area WorkFlow (WAWF). Local processing office (LPO) is the office responsible for payment certification when payment certification is done external to the entitlement system. (b) Electronic invoicing. The WAWF system is the method to electronically process vendor payment requests and receiving reports, as authorized by DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports. (c) WAWF access. To access WAWF, the Contractor shall-- (1) Have a designated electronic business point of contact in the Central Contractor Registration at https://www.acquisition.gov; and (2) Be registered to use WAWF at https://wawf.eb.mil/ following the step-by-step procedures for self-registration available at this Web site. (d) WAWF training. The Contractor should follow the training instructions of the WAWF Web-Based Training Course and use the Practice Training Site before submitting payment requests through WAWF. Both can be accessed by selecting the "Web Based Training" link on the WAWF home page at https://wawf.eb.mil/. (e) WAWF methods of document submission. Document submissions may be via Web entry, Electronic Data Interchange, or File Transfer Protocol. (f) WAWF payment instructions. The Contractor must use the following information when submitting payment requests and receiving reports in WAWF for this contract/order: (1) Document type. The Contractor shall use the following document type(s). Invoice and Receiving Report (Combo) - this is an invoice and receiving report (DD250) created at the same time. Note: If a "Combo" document type is identified but not supportable by the Contractor's business systems, an "Invoice" (stand-alone) and "Receiving Report" (stand-alone) document type may be used instead.) (2) Inspection/acceptance location. The Contractor shall select the following inspection/acceptance location(s) in WAWF, as specified by the contracting officer. Inspection Location: Destination Acceptance Location: Destination (3) Document routing. The Contractor shall use the information in the Routing Data Table below only to fill in applicable fields in WAWF when creating payment requests and receiving reports in the system. Routing Data Table -------------------------------------------------------------------------------------------- Field Name in WAWF Data to be entered in WAWF -------------------------------------------------------------------------------------------- Contract Number TBD Delivery Order Number TBD CAGE Code TBD Pay Official DoDAAC N62827 Issue By DoDAAC N64267 Admin DoDAAC N64267 Inspect By DoDAAC N/A Ship To Code N64267 Ship From Code N/A Mark For Code N/A Service Approver (DoDAAC) N/A Service Acceptor (DoDAAC) N/A Accept at Other DoDAAC N/A LPO DoDAAC N/A DCAA Auditor DoDAAC N/A Other DoDAAC(s) N/A -------------------------------------------------------------------------------------------- (4) Payment request and supporting documentation. The Contractor shall ensure a payment request includes appropriate contract line item and subline item descriptions of the work performed or supplies delivered, unit price/cost per unit, fee (if applicable), and all relevant back-up documentation, as defined in DFARS Appendix F, (e.g. timesheets) in support of each payment request. (5) WAWF email notifications. The Contractor shall enter the email address identified below in the "Send Additional Email Notifications" field of WAWF once a document is submitted in the system. Send Additional Email Notification To: (WAWF Id Acceptor) TBD (Alternate WAWF Id Acceptor) contact@example.gov (g) The contractor shall submit invoices/cost vouchers for payment per contract terms and the government shall process invoices/cost vouchers for payment per contract terms. Contractors approved by DCAA for direct billing will submit cost vouchers directly to DFAS via WAWF. Final voucher submission will be approved by the ACO. ((h) If you have any questions regarding WAWF, please contact the WAWF helpdesk at the above +1 (555) 000-0000 or the NAVSEA WAWF point of contact Margaret Morgan at +1 (555) 000-0000 or contact@example.gov. (End of clause) 52.204-19, Incorporation by Reference of Representations and Certifications (Dec 2014). 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Dec 2014). 52.222-50, Combatting Trafficking in Persons (Mar 2015). 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (Aug 2011). 52.232-40, Providing Accelerated Payments to Small Business Subcontractors (Dec 2013). 52.232-39, Unenforceability of Unauthorized Obligations (Jun 2013). 52.233-3, Protest After Award (Aug 1996). 52.233-4, Applicable Law for Breach of Contract Claim (Oct 2004). 252.203-7000, Requirements Relating to Compensation of Former DoD Officials (Sep 2011). 252.203-7002, Requirement to Inform Employees of Whistleblower Rights (Sep 2013). 252.204-7003, Control of Government Work Product (Apr 1992). 252.204-7012, Safeguarding of Unclassified Controlled Technical Information. (Nov 2013). 252.204-7015, Disclosure of Information to Litigation Support Contractors (Feb 2014). 252.225-7048, Export Controlled Items (Jun 2013). 252.232-7010, Levies on Contract Payments (Dec 2006). This clause is REQUIRED in all solicitations and contracts other than those for micropurchases. 252.247-7023, Transportation of Supplies by Sea (Apr 2014). This clause is REQUIRED in all solicitations and contracts, including solicitations and contracts using FAR part 12 procedures for the acquisition of commercial items, except those for direct purchase of ocean transportation services. 1 INSTRUCTIONS TO OFFERORS--COMMERCIAL ITEMS (JULY 2013) (a) North American Industry Classification System (NAICS) code and small business size standard. The NAICS code and small business size standard for this acquisition appear in Block 10 of the solicitation cover sheet (SF 1449). However, the small business size standard for a concern which submits an offer in its own name, but which proposes to furnish an item which it did not itself manufacture, is 500 employees. (b) Submission of offers. Submit signed and dated offers to the office specified in this solicitation at or before the exact time specified in this solicitation. Offers may be submitted on the SF 1449, letterhead stationery, or as otherwise specified in the solicitation. As a minimum, offers must show-- (1) The solicitation number; (2) The time specified in the solicitation for receipt of offers; (3) The name, address, and telephone number of the offeror; (4) A technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation. This may include product literature, or other documents, if necessary; (5) Terms of any express warranty; (6) Price and any discount terms; (7) "Remit to" address, if different than mailing address; (8) A completed copy of the representations and certifications at FAR 52.212-3 (see FAR 52.212-3(b) for those representations and certifications that the offeror shall complete electronically); (9) Acknowledgment of Solicitation Amendments; (10) Past performance information, when included as an evaluation factor, to include recent and relevant contracts for the same or similar items and other references (including contract numbers, points of contact with telephone numbers and other relevant information); and (11) If the offer is not submitted on the SF 1449, include a statement specifying the extent of agreement with all terms, conditions, and provisions included in the solicitation. Offers that fail to furnish required representations or information, or reject the terms and conditions of the solicitation may be excluded from consideration. (c) Period for acceptance of offers. The offeror agrees to hold the prices in its offer firm for 30 calendar days from the date specified for receipt of offers, unless another time period is specified in an addendum to the solicitation. (d) Product samples. When required by the solicitation, product samples shall be submitted at or prior to the time specified for receipt of offers. Unless otherwise specified in this solicitation, these samples shall be submitted at no expense to the Government, and returned at the sender's request and expense, unless they are destroyed during preaward testing. (e) Multiple offers. Offerors are encouraged to submit multiple offers presenting alternative terms and conditions or commercial items for satisfying the requirements of this solicitation. Each offer submitted will be evaluated separately. (f) Late submissions, modifications, revisions, and withdrawals of offers: (1) Offerors are responsible for submitting offers, and any modifications, revisions, or withdrawals, so as to reach the Government office designated in the solicitation by the time specified in the solicitation. If no time is specified in the solicitation, the time for receipt is 4:30 p.m., local time, for the designated Government office on the date that offers or revisions are due. (2)(i) Any offer, modification, revision, or withdrawal of an offer received at the Government office designated in the solicitation after the exact time specified for receipt of offers is "late" and will not be considered unless it is received before award is made, the Contracting Officer determines that accepting the late offer would not unduly delay the acquisition; and-- (A) If it was transmitted through an electronic commerce method authorized by the solicitation, it was received at the initial point of entry to the Government infrastructure not later than 5:00 p.m. one working day prior to the date specified for receipt of offers; or (B) There is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government's control prior to the time set for receipt of offers; or (C) If this solicitation is a request for proposals, it was the only proposal received. (ii) However, a late modification of an otherwise successful offer, that makes its terms more favorable to the Government, will be considered at any time it is received and may be accepted. (3) Acceptable evidence to establish the time of receipt at the Government installation includes the time/date stamp of that installation on the offer wrapper, other documentary evidence of receipt maintained by the installation, or oral testimony or statements of Government personnel. (4) If an emergency or unanticipated event interrupts normal Government processes so that offers cannot be received at the Government office designated for receipt of offers by the exact time specified in the solicitation, and urgent Government requirements preclude amendment of the solicitation or other notice of an extension of the closing date, the time specified for receipt of offers will be deemed to be extended to the same time of day specified in the solicitation on the first work day on which normal Government processes resume. (5) Offers may be withdrawn by written notice received at any time before the exact time set for receipt of offers. Oral offers in response to oral solicitations may be withdrawn orally. If the solicitation authorizes facsimile offers, offers may be withdrawn via facsimile received at any time before the exact time set for receipt of offers, subject to the conditions specified in the solicitation concerning facsimile offers. An offer may be withdrawn in person by an offeror or its authorized representative if, before the exact time set for receipt of offers, the identity of the person requesting withdrawal is established and the person signs a receipt for the offer. (g) Contract award (not applicable to Invitation for Bids). The Government intends to evaluate offers and award a contract without discussions with offerors. Therefore, the offeror's initial offer should contain the offeror's best terms from a price and technical standpoint. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. The Government may reject any or all offers if such action is in the public interest; accept other than the lowest offer; and waive informalities and minor irregularities in offers received. (h) Multiple awards. The Government may accept any item or group of items of an offer, unless the offeror qualifies the offer by specific limitations. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered, unless the offeror specifies otherwise in the offer. (i) Availability of requirements documents cited in the solicitation. (1)(i) The GSA Index of Federal Specifications, Standards and Commercial Item Descriptions, FPMR Part 101-29, and copies of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained for a fee by submitting a request to--GSA Federal Supply Service Specifications Section, Suite 8100, 470 East L'Enfant Plaza, SW, Washington, DC 20407, Telephone +1 (555) 000-0000, Facsimile +1 (555) 000-0000. (ii) If the General Services Administration, Department of Agriculture, or Department of Veterans Affairs issued this solicitation, a single copy of specifications, standards, and commercial item descriptions cited in this solicitation may be obtained free of charge by submitting a request to the addressee in paragraph (i)(1)(i) of this provision. Additional copies will be issued for a fee. (2) Most unclassified Defense specifications and standards may be downloaded from the following ASSIST websites: (i) ASSIST (http://assist.daps.dla.mil). (ii) Quick Search (http://assist.daps.dla.mil/quicksearch). (iii) ASSISTdocs.com (http://assistdocs.com). (3) Documents not available from ASSIST may be ordered from the Department of Defense Single Stock Point (DoDSSP) by-- (i) Using the ASSIST Shopping Wizard (http://assist.daps.dla.mil/wizard); (ii) Phoning the DoDSSP Customer Service Desk +1 (555) 000-0000, Mon-Fri, 0730 to 1600 EST; or (iii) Ordering from DoDSSP, Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094, Telephone +1 (555) 000-0000/2179, Facsimile +1 (555) 000-0000. (4) Nongovernment (voluntary) standards must be obtained from the organization responsible for their preparation, publication, or maintenance. (j) Data Universal Numbering System (DUNS) Number. (Applies to all offers exceeding $3,000, and offers of $3,000 or less if the solicitation requires the Contractor to be registered in the System for Award Management (SAM) database. The offeror shall enter, in the block with its name and address on the cover page of its offer, the annotation "DUNS" or "DUNS +4" followed by the DUNS or DUNS +4 number that identifies the offeror's name and address. The DUNS +4 is the DUNS number plus a 4-character suffix that may be assigned at the discretion of the offeror to establish additional SAM records for identifying alternative Electronic Funds Transfer (EFT) accounts (see FAR Subpart 32.11) for the same concern. If the offeror does not have a DUNS number, it should contact Dun and Bradstreet directly to obtain one. An offeror within the United States may contact Dun and Bradstreet by calling +1 (555) 000-0000 or via the internet at http://fedgov.dnb.com/webform. An offeror located outside the United States must contact the local Dun and Bradstreet office for a DUNS number. The offeror should indicate that it is an offeror for a Government contract when contacting the local Dun and Bradstreet office. (k) System for Award Management. Unless exempted by an addendum to this solicitation, by submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database prior to award, during performance and through final payment of any contract resulting from this solicitation. If the Offeror does not become registered in the SAM database in the time prescribed by the Contracting Officer, the Contracting Officer will proceed to award to the next otherwise successful registered Offeror. Offerors may obtain information on registration and annual confirmation requirements via the SAM database accessed through https://www.acquisition.gov. (l) Debriefing. If a post-award debriefing is given to requesting offerors, the Government shall disclose the following information, if applicable: (1) The agency's evaluation of the significant weak or deficient factors in the debriefed offeror's offer. (2) The overall evaluated cost or price and technical rating of the successful and the debriefed offeror and past performance information on the debriefed offeror. (3) The overall ranking of all offerors, when any ranking was developed by the agency during source selection. (4) A summary of the rationale for award; (5) For acquisitions of commercial items, the make and model of the item to be delivered by the successful offeror. (6) Reasonable responses to relevant questions posed by the debriefed offeror as to whether source-selection procedures set forth in the solicitation, applicable regulations, and other applicable authorities were followed by the agency. 52.212-2 EVALUATION--COMMERCIAL ITEMS (JAN 1999) (a) The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers: Factor (1) Technical capability of the item offered to meet the Government requirement; Factor (2) Past Performance; and Evaluated Price. Technical Capability and Past Performance will be rated as Acceptable or Unacceptable. Award will be made to the lowest price technically acceptable offer. (b) Options. The Government will evaluate offers for award purposes by adding the total price for all options to the total price for the basic requirement. The Government may determine that an offer is unacceptable if the option prices are significantly unbalanced. Evaluation of options shall not obligate the Government to exercise the option(s). (c) A written notice of award or acceptance of an offer, mailed or otherwise furnished to the successful offeror within the time for acceptance specified in the offer, shall result in a binding contract without further action by either party. Before the offer's specified expiration time, the Government may accept an offer (or part of an offer), whether or not there are negotiations after its receipt, unless a written notice of withdrawal is received before award. (End of provision) BASIS OF AWARD ALL UNITS OF ALL ITEMS WILL BE AWARDED TO ONE OFFEROR. OFFERS, THEREFORE, MUST BE ON THE BASIS OF FURNISHING ALL UNITS OF ALL ITEMS.