Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ROTOR, PUMP

Active
SPE7M4-26-T-326HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a pump rotor, identified by NSN 4320-01-233-2417 and part number F-19000, supplied by TEIKOKU USA INC., with a total quantity of four units required. The item is classified as a critical application component and is intended for use on Crane Co. Chem Pump Division Model GBU. All supplies must comply with strict DLA packaging requirements and technical standards, including adherence to MIL-STD-2073-1E for packaging and MIL-P-16789 for preservation, with Level A preservation mandated when ZZ preservation method is specified. Mercury or mercury-containing compounds are explicitly prohibited from intentional addition or direct contact with the hardware, except under defined exceptions such as functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specific chemical reagents approved by NAVSEA; portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The item must be labeled and marked in accordance with MIL-STD-129 with no special marking code applied. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occurring at destination, and the required delivery window is 165 days from solicitation, with a specified ship date of February 2, 2027, and original delivery due by March 15, 2027. The contract falls under a Women-Owned Small Business Set-Aside, issued under solicitation SPE7M4-26-T-326H, with procurement governed by the DLA Master List of Technical and Quality Requirements referenced on their official website, with revisions controlled by the solicitation or award date depending on acquisition size. The specified delivery and shipping address is the DLA Distribution San Joaquin facility in Tracy, CA, and transportation logistics follow DLAD Procurement Notes C19 and C20.

General Info

Four critical pump rotors for Crane Co. Chem Pump, DLA packaging, no mercury, delivery by March 15, 2027, Women-Owned Small Business Set-Aside.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

WOSB

Documents

(1)

RFQ SPE7M4-26-T-326H Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
Blake Tushar
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ROTOR,PUMP
ROTOR,PUMP.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
USED ON CRANE CO. CHEMPUMP DIV. MODEL NR. GBU.
CRITICAL APPLICATION ITEM
TEIKOKU USA INC. 99827 P/N F-19000 PIECE 2-0,9-0,9-5,13-0
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017775953 0001 EA 4.000
NSN/MATERIAL:4320012332417
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M4-26-T-326H
SECTION B
PR: 7017775953 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF FEDERAL SPECIFICATIONS MIL-P-16789 FOR PUMPS, CENTRIFUGAL." "WHEN ZZ IS THE METHOD OF PRESERVATION, USE LEVEL "A" PRESERVATION AS CITED IN THE COMMODITY SPECIFICATION."
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:02/02/2027 Original Required Delivery Date:03/15/2027
SPE7M4-26-T-326H NSN/Part Number: 4320-01-233-2417 Quantity: 4 EA Purchase Request: 7017775953QTY: 4 Delivery: 165 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333914
New
DIBBS
COUPLING, SHAFT, RETAINE
Solicitation # SPE7M1-26-T-268N
The contract pertains to the procurement of a coupling, shaft, retainer item identified by NSN 4320-01-183-1924 and part number 393479, supplied by General Electric Company and Eaton Aerospace, LLC, and classified as a commercial item and critical application component for use on the GE 100 engine. The item is subject to DLA Packaging Requirements for Procurement and must comply with ASTM D3951 unless superseded by more stringent technical or quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging and labeling must follow MIL-STD-129, and palletization must adhere to RP001 guidelines. The unit of issue is each (EA), with a fixed quantity of 15 units at a unit price of $15.00, totaling $225.00, and no variance is permitted in quantity. Delivery is mandated FOB origin with inspection and acceptance occurring at destination, and the item must be delivered within 165 days from the contract award, with a required ship date of February 2, 2027. The contract is issued under solicitation number SPE7M1-26-T-268N, posted on August 9, 2026, with responses due by August 20, 2026, under NAICS code 333914 and managed by the Department of Defense’s Maritime Supply Chain. Delivery is to be made to DLA Distribution Depot Oklahoma at Tinker AFB, and transportation logistics are governed by DLAD Proc Notes C19 and C20. The item is part of a GE PBL program, and all government identification must be removed from non-accepted supplies. The point of contact for the contract is Michael Reese, with email and phone provided for inquiries. The unit of issue and purchase unit are standardized per DLA’s official reference, and all terms align with DoD procurement protocols for simplified or large acquisitions as applicable.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
DIBBS
DEFLECTOR, DIRT AND
Solicitation # SPE7M1-26-T-268U
The contract pertains to the procurement of a single unit of a deflector component designated by NSN 4320-01-516-8267, with a delivery requirement of 20 days after order placement. It is issued under solicitation SPE7M1-26-T-268U by the Defense Logistics Agency through the Maritime Supply Chain organization, with Michael Reese listed as the primary point of contact. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and it incorporates specific obligations including configuration change management, removal of government identification from non-accepted supplies, and export control compliance under ITAR or EAR regulations. Technical data associated with this item is classified as export-controlled, requiring contractors to hold an approved US/Canada Joint Certification Program certification, complete mandatory training on handling DOD export-controlled data, and obtain formal authorization from the DLA to access such information. The solicitation mandates compliance with DLA packaging standards and cybersecurity requirements, including certification under CMMC Level 2 by any third-party assessment organization involved. The response deadline is August 20, 2026, and the North American Industry Classification System code is 333914, indicating classification under Other Fabricated Metal Product Manufacturing. The place of performance is listed as FPO with a ZIP code of 96632, and the acquisition is governed by federal procurement regulations applicable to Department of Defense contracts.
MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333914
New
Federal
PUMP, JP5 SERVICE
Solicitation # 70Z08026QAG169
The U.S. Coast Guard Surface Forces Logistics Center is seeking quotations for two exclusive Ingersoll-Dresser Pump Canada Inc. JP-5 service pumps, part number B8863317, specifically designed for use on 270-foot WMEC vessels. These pumps must deliver 50 GPM at 140 PSI, operate at 1200 RPM with clockwise rotation, and feature D1 external construction with 3-inch 125# FF flanges and mechanical seals on a 1.5-inch rotor. The pumps are to be delivered individually crated and labeled in accordance with SP-PP&M-001, and no substitute or non-OEM parts are permitted. The solicitation is sole source, as the Government believes only Ingersoll-Dresser or its authorized distributors can meet the exact technical requirements, and offerors must submit documentation verifying their status as an authorized distributor with a letter from the OEM confirming genuine parts supply. Quotations must be submitted by August 14, 2026, at 10:00 AM Eastern Time and are subject to simplified acquisition procedures under FAR Part 13, with award based on lowest price technically acceptable and a firm fixed price contract structure. All offerors must be registered in SAM.gov with a valid DUNS number and Tax Identification Number, and must complete and include FAR 52.212-3 representations and certifications. The solicitation incorporates multiple FAR and HSAR clauses including prohibitions on contracting with inverted domestic corporations, restrictions on subcontracting with debarred entities, Buy American Act requirements, prohibitions on child and convict labor, equal opportunity protections, and electronic fund transfer mandates. Additionally, CGAP 3042.302-90 applies to valuation and inventory control for spare parts. Responses must include the required disclosure regarding corporate inversion status under HSAR 3009.104-70 through 73 and any applicable waiver requests, with all documentation submitted in a single, complete package to ensure consideration.
Sflc Procurement Branch 1(00080)

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 333914
New
Federal
Centrifugal Pump Manufacturing and SupplyThe contract seeks the manufacture and delivery of a commercial-off-the-shelf centrifugal pump designed to meet stringent form, fit, and function specifications required for integration into military weapons systems. The pump must be procured as a ready-made solution without custom engineering, ensuring compatibility with existing military infrastructure and operational environments, with performance standards aligned to defense-grade reliability and durability expectations. The place of performance is designated as Piqua, Ohio, with the delivery and acceptance criteria tied to strict military technical compliance. The solicitation is issued as a subcontract under the Department of Defense, with the contracting office managed by SPRMM1 DLA Mechanicsburg, and is classified under NAICS code 333914 for pump and pumping equipment manufacturing. The opportunity was posted on August 7, 2026, with a response deadline of August 14, 2026, at 8:00 PM Eastern Time, creating a seven-day window for qualified suppliers to submit proposals. No set-aside provisions are specified, meaning the contract is open to all eligible entities regardless of business size or ownership status, and bidders must ensure the proposed pump fully satisfies the military’s functional and environmental requirements without modification.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333914
New
Federal
5 Year Indefinite Delivery, Indefinite Quantity Contract for Centrifugal Pump
Solicitation # SPRMM1-26-R-RA70
The U.S. Department of Defense, through DLA Weapons Support in Mechanicsburg, Pennsylvania, is seeking qualified sources to participate in a five-year indefinite delivery, indefinite quantity contract for the centrifugal pump with NSN 4320-014860356 and part number 082682MP. This item is classified as a commercial, nondevelopmental, off-the-shelf product under AMC Code Z, meaning it is available through commercial vendor catalogs, price lists, or technical manuals, and the acquisition is authorized for competitive bidding for a second or subsequent time. The solicitation number is SPRMM1-26-R-RA70, with responses due by August 14, 2026, and the primary point of contact is Giovanna Poppleton, reachable via email at giovanna.poppleton@dla.mil. The contract will be awarded under NAICS code 333914 and does not involve any set-aside provisions, opening the opportunity to all eligible vendors. Performance for this contract will be centered in Piqua, Ohio, with the awarding office located in Mechanicsburg, Pennsylvania. The notice is strictly informational and does not constitute a solicitation, commitment, or obligation by the U.S. government. No funds are available for respondents to prepare submissions, and all information provided in response to this notice is voluntary and will not be compensated. Interested parties should review the official SAM.gov listing linked in the contract data for the most accurate details, as this posting is intended solely to gather market intelligence and identify capable suppliers prior to any formal procurement action.
SPRMM1 DLA Mechanicsburg

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 333914
New
Federal
CPK-5 Two Stage Fire Pump
Solicitation # FA481426Q0037
The U.S. Department of Defense, through the Office of FA4814 6 Cons Pk in Tampa, Florida, is soliciting one Waterous CPK-5 Two-Stage Centrifugal Fire Pump under solicitation number FA481426Q0037, with a response deadline of August 13, 2026. The pump must deliver 320 GPM at 1,350 PSI and feature a ductile iron body with replaceable bronze wear rings and impellers, a self-adjusting mechanical shaft seal, and a 12-volt electrical system. The contract will be awarded as a Firm-Fixed-Price agreement with a one-year parts warranty, and only small businesses are eligible to submit offers under a Total Small Business Set Aside. The North American Industry Classification System code for this procurement is 333914, and all offerors must comply with detailed technical specifications, packaging guidelines, and brand-name justification requirements contained in the full solicitation package. Primary point of contact is Vincent R. Mata, with Ramon Jimenez as secondary contact, and all submissions must be directed through the official SAM.gov portal.
FA4814 6 Cons Pk

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 333914
New
Federal
DISPLAY UNIT, MULTI
Solicitation # N0010426QUC23
This contract solicitation, titled DISPLAY UNIT, MULTI, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks qualified contractors to repair a specific display unit under a firm-fixed-price, not-to-exceed or estimated pricing structure. All responses must be submitted electronically to derek.j.ford5.civ@us.navy.mil and must include detailed pricing, repair turnaround time, new unit cost, and a capacity throughput declaration. The repair must be completed within 180 days of the asset’s physical receipt at the contractor’s facility, as recorded in the Commercial Asset Visibility (CAV) system, with failure to meet this deadline triggering a per-unit, per-month price reduction up to a maximum agreed amount. Only authorized repair sources may be awarded, and the award will not be delayed to secure authorization for unapproved vendors. The contract mandates compliance with MIL-STD-130 for marking, IUID requirements per DFARS 252.211-7003, and MIL-STD-2073 for packaging, with all repairs adhering to manufacturer specifications and government-approved technical documentation. The CAGE code 44114 with reference number 8566235-3 governs the repaired item, and design changes require prior written approval from the Contracting Officer using established code classifications. The bidder must provide a detailed cost breakdown including profit rate, quote expiration date (at least 90 days), and identification of all relevant CAGE codes for award, inspection, shipping, and packaging locations. Any test and evaluation fees for items deemed beyond repair must be disclosed and cannot exceed a specified limit. The induction period expires 365 days after contract award, rendering any assets received after that date ineligible for repair without bilateral agreement. Contractors are required to maintain full inspection records for 365 days after final delivery and must comply with Buy American and cybersecurity maturity model requirements. The Government reserves the right to perform its own inspections and may terminate for default if repair deadlines are unmet without excusable cause. Only authorized distributors of the original manufacturer may submit offers, necessitating proof of authorization. All technical documents and drawings provided are subject to distribution statements under OPNAVINST 5510.1, and access to NOFORN or Official Use Only materials requires formal certification. The solicitation number is N0010426QUC23, with a response deadline of September 8, 2026
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333914
New
Federal
43--RESERVOIR,HYDRAULIC
Solicitation # SPRPA126QUB39
The contract solicits two hydraulic reservoirs identified by NSN 7R-4320-016887302-H5 and reference number 06650-04840-103, with delivery terms set at FOB origin. The part is subject to strict engineering source approval requirements, meaning it can only be procured from qualified sources that possess unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge critical to maintaining the part’s quality. The government cannot obtain the necessary technical data or manufacturing expertise from alternative sources at a reasonable cost, and the approved source retains exclusive data rights and technical knowledge essential to the part’s performance. Any alternative supplier must successfully qualify through a formal process established by the design control activity and approved by the responsible government engineering authority. This restriction ensures operational reliability and adherence to stringent military standards. The solicitation, numbered SPRPA126QUB39, is posted by the Department of Defense’s DLA Aviation office in Philadelphia, with responses due by September 8, 2026, and Maura Scanlon listed as the primary point of contact for inquiries.
Pa DLA Aviation At Philadelphia

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333914
New
International
Coupling,Shaft,Flexible; Pump Unit,Rotary; Pump,Rotary
Solicitation # W8482-264716/A
The Department of National Defence is soliciting offers for the procurement of three critical maritime components—Flexible Shaft Coupling, Rotary Pump Unit, and Rotary Pump—to support the Controllable Pitch Propeller systems on Halifax-class frigates, with deliveries required at CFB Halifax and CFB Esquimalt. The solicitation, identified by number W8482-264716/A and posted on July 17, 2026, with a response deadline of August 20, 2026, is governed by the Standard Terms and Conditions for Solicitation of Offers and Contracts from the Directorate of Maritime Procurement. Technical specifications, quantities, part numbers, and NSNs are detailed in the Annex Statement of Requirements, and offerors must provide full compliance with item-by-item delivery, packaging, and marking requirements, including adherence to Canadian Forces Packaging Specification D-LM-008-036/SF-000 or NATO TL8100-0100 standards depending on origin, with barcoding in compliance with D-LM-008-002/SF-001. All hazardous materials must be labeled and documented per the Transportation of Dangerous Goods Act and Hazardous Products Act, including bilingual Safety Data Sheets indicating NATO Stock Numbers, and contractors bear full liability for improper handling. Bidders proposing substitute or equivalent products must clearly identify brand, model, part number, and NCAGE. Submission must be structured into three sections: Technical Offer, Financial Offer, and Forms, with mandatory inclusion of the Annex Offeror Submission Details in both Excel and PDF formats (PDF prioritized in case of discrepancy), alongside the Offeror Submission Form and Declaration Form. Offers must be submitted to the Department of National Defence Bid Receiving Unit by the published deadline, and documentation may be provided in either English or French. Evaluation will be based on the Lowest Evaluated Price with Mandatory Technical Criteria—Multiple Items, with compliance assessed as a pass/fail gate; failure to meet any mandatory technical or solicitation requirement renders an offer non-compliant. Award may be made on an item-by-item basis with multiple contracts possible. Contractors must comply with International Sanctions, Anti-forced Labour provisions, Reciprocal Procurement rules, and the Code of Conduct for Procurement, with continuous adherence to all certifications required throughout the contract term. Invoicing requires detailed breakdowns of costs, quantities, unit prices, delivery methods, and tax registrations, submitted separately to the payment offices in
Department of National Defence

POSTED

3 days ago

DEADLINE

in 26 days
View Details
NAICS: 333914
New
Federal
43--PUMP UNIT,CENTRIFUG
Solicitation # SPE7M126T264B
The U.S. Department of Defense, through DLA Land and Maritime, is seeking to procure 149 units of the centrifugal pump unit with NSN 4320016925519 under solicitation SPE7M126T264B, which is a combined solicitation set aside exclusively for SBA-certified Women-Owned Small Businesses. The requirement is for delivery to DLA Distribution at location W1A8, with a mandatory delivery deadline of 168 days after award. The only approved source for this item is 44MG9 9044665A, and no technical specifications, plans, or drawings are available for release. All responsive and responsible offers must be submitted electronically via the SAM.gov portal by the closing date of August 17, 2026, and hard copies are not accepted. The solicitation is posted online only, and interested parties are directed to access it through the provided SAM.gov link or via the DIBBS website using the solicitation number. Questions must be directed to the designated point of contact via email, with detailed instructions provided in the solicitation’s Additional Information section. The North American Industry Classification System code for this procurement is 333914, and the contract office is located in Columbus, Ohio.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333914
New
Federal
43--PARTS KIT,HYDRAULIC
Solicitation # SPE7M426T308F
The contract solicitation seeks quotes for 14 units of NSN 4320009118338, a hydraulic parts kit, to be delivered to DLA Distribution San Diego within 168 days of award. The only approved source for this item is supplier 62983 914286, and all responsible vendors are invited to submit electronic quotes promptly. The solicitation, identified as SPE7M426T308F, is posted online with no hard copies available, and no technical specifications, plans, or drawings are provided to bidders. The response deadline is August 17, 2026, and quotes must be submitted electronically through the SAM.gov portal. The procurement falls under NAICS code 333914 and is managed by the Department of Defense through DLA Land and Maritime, based in Columbus, Ohio. Any questions must be directed via email to the listed point of contact, with additional details accessible through the solicitation’s official link.
DLA Land And Maritime

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 333914
New
Federal
PUMP,ROTARY
Solicitation # N0010426QJC08
This contract pertains to the repair of a PUMP, ROTARY under a firm-fixed-price arrangement, with a mandatory Repair Turnaround Time (RTAT) of 211 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The contractor must ensure all repairs comply with manufacturer specifications, technical drawings, and applicable military standards including MIL-STD-130 for marking and MIL-STD-2073 for packaging. The Government requires inspections and acceptance of all repaired items prior to final payment, and failure to meet the RTAT will trigger per-unit monthly price reductions up to a specified maximum, without limiting the Government’s right to terminate for default. Freight is FOB Origin, and the Navy handles all transportation under the CAV protocol. The contract mandates strict documentation of repair processes, quality records retained for 365 days after final delivery, and prohibits substitutions without prior written approval from the Contracting Officer. The contractor must be an authorized distributor of the original manufacturer and submit proof of authorization with their quote. Pricing must reflect historical data or be justified if outside norms, and the quote must include unit price, total price, RTAT, and a comparison to the cost and lead time of a new unit. An option exists to increase the quantity by up to 365 days after award, with deliveries continuing at original unit pricing unless otherwise agreed. The contract applies to small businesses registered under NAICS 333914 with no more than 750 employees and includes compliance with security prohibitions, Navy-specific workflow systems, and mandatory use of the WFP Mod Assist module managed by Alexander Craft. All deliverables require Government Source Inspection, and any asset deemed beyond repair may qualify for a negotiated test and evaluation fee not to exceed a set amount. Compliance with distribution statements, document access procedures, and Navy-established technical order requirements is mandatory, and all correspondence must be routed through designated Navy procurement channels.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 336412
New
DIBBS
SEAL, ENGINE STARTER
Solicitation # SPE7M4-26-T-326Z
This contract pertains to the procurement of 58 units of a SEAL, ENGINE STARTER with NSN 2995-00-939-8495, supplied by EATON AEROSPACE, LLC under part number 608593. The item is designated as a critical application and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Quality conformance is governed by TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS and QUALITY CONFORMANCE INSPECTION REQUIREMENTS, with inspection sampling mandates following MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. The contract enforces CMMC Level 2 cybersecurity requirements and mandates strict adherence to MIL-STD-129 for labeling and packaging, with palletization compliant with DLA packaging standards. Delivery is FOB origin with a 47-day lead time, and inspection and acceptance occur at the destination. The unit of issue is each (EA), priced at $58.00 per unit, with no variance allowed in quantity. All packaging must be marked and stored per specified protocols, and the items must be delivered to DLA Distribution Cherry Point in North Carolina by the required delivery date of February 19, 2027.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M4-26-T-327X
This contract pertains to the procurement of an O-RING with NSN 5331-00-194-1670, quantity of 1,283 units, under solicitation SPE7M4-26-T-327X, with a required delivery date of February 13, 2027, and a delivery window of 118 days. The item is classified as a critical application product with a non-extendable shelf life of 180 months and is subject to Qualified Products List (QPL) requirements, meaning the manufacturer must be pre-approved by the Performance Review Institute at the time of award. Technical and quality specifications are governed by referenced standards including SAE AS3209C and AMS7276J, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for specific exceptions like batteries or sensors explicitly authorized by NAVSEA, and portable devices containing mercury must have shock-proof design with secondary containment. Asbestos is completely banned per FED-STD-313. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling requiring the code 32 to indicate Type I shelf-life status. The product must be sealed in a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1, applicable to direct vendor delivery, foreign military sales, and stock shipments. All packaging and shipping must follow DLA Packaging Requirements and IP025 for hazardous materials, with no mercury permitted in any packaging materials. The item is to be delivered FOB origin to the designated receiving facility in Texarkana, TX, with a 0% variance allowed on quantity. Transportation and freight procedures are governed by DLAD PROC NOTES C19 and C20. The contract is governed by DLA’s master list of technical and quality requirements, with compliance controls tied to the solicitation issue date. The sole point of contact is Freddie Vazquez, with the purchase request number 7017437682 and unit price of $1,283.00 for the total contract value.
Other Fabricated Wire Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
TORQUE TOOL, SEA
Solicitation # SPE7M4-26-T-326C
The contract pertains to the procurement of two torque tools, identified by NSN 4921-01-605-4834, under solicitation SPE7M4-26-T-326C, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 20 days after award, with performance to occur in Keyport, Washington, 98345-7610. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) to meet the cybersecurity requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the Defense Logistics Agency. The North American Industry Classification System code is 332994, and the primary point of contact is Rory O’Reilly at DLA.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
PLUG, TUBE REPAIR
Solicitation # SPE7M4-26-T-327H
The contract specifies the procurement of 2,182 units of a laminated phenolic tube repair plug with a nominal size of 3/8 inch, all of which must comply with the salient characteristics and sections 3.4 through 3.7 of specification A-A-59949. Each unit must meet rigorous quality standards, and the supplier is required to provide a Certificate of Quality Compliance for every manufacturing lot, with each certificate prepared in accordance with the Supplemental Quality Assurance Provision. For deliveries subject to government inspection at source, the certificate must be available for review by the government representative upon material presentation, and compliance with COQC requirements enables the government to sign off on the WAWF receiving report provided the documentation is properly uploaded as an attachment to the Production CLIN in iRAPT. An electronic copy of each COQC must be submitted via the Attachment tab of the Receiving Report in the iRAPT system for government record retention. The item is identified by NSN 4730-00-289-0593 under solicitation SPE7M4-26-T-327H, issued by the Fluid Handling Division of the Department of Defense, with a delivery deadline of 165 days after award. The purchase request number is 7017775437, and the place of performance is New Cumberland, Pennsylvania, with a zip code of 17070-5002. All data required by the contract, including packaging and certification documentation, is to be included in the quoted price. The primary point of contact is Blake Tushar, reachable via email and phone, and the solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The NAICS code for this procurement is 332996, indicating it falls under other miscellaneous fabricated metal product manufacturing.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
LOCKNUT, TUBE FITTING
Solicitation # SPE7M4-26-T-327W
This contract specifies the procurement of a locknut for tube fittings made from corrosion-resistant steel (CRES) with passivation, sized for 0.312-inch nominal tubing, in compliance with SAE Aerospace standards AS4841 and AS5179D. The item is classified as a critical application component and must be sourced exclusively from manufacturers or assemblers listed on the Performance Review Institute’s Qualified Manufacturer List (QML) or Qualified Products List (QPL). All production and assembly must adhere to strict accreditation requirements, and material must not contain mercury or mercury compounds except under specific, limited exemptions for functional devices like sensors, batteries, or instruments. Ozone-depleting chemicals are strictly prohibited. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA’s packaging requirements. The NSN 4730007345774 is procured in two separate line items totaling 1,140 units, with delivery required within 18 days FOB origin. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. Delivery is split between two DLA depots—Tinker AFB and Robins AFB—with specific shipping addresses and required ship dates of September 8, 2026, and May 13, 2027, respectively. The solicitation number is SPE7M4-26-T-327W, and compliance with all referenced technical and quality requirements from the DLA Master List is mandatory.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 326122
New
DIBBS
COUPLING, TUBE
Solicitation # SPE7M3-26-T-8151
The contract is for the procurement of a coupling tube, part number DPL4514T10, manufactured by Designed Metal Connections Inc, identified by NSN 4730016464133, with a total quantity of six units. The item is designated as a critical application component and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must follow MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization adhering to RP001, and all items must be marked and labeled accordingly. The product is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and incorporates requirements for Covered Defense Information. Delivery must be made FOB origin within 44 days of contract award, with inspection and acceptance occurring at the destination. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and the unit of issue is each (EA), with a total contract value of $36.00. The solicitation, issued under contract number SPE7M3-26-T-8151, was posted on August 9, 2026, with a response deadline of August 20, 2026, and the original required delivery date is January 30, 2027. Point of contact is William Cain, with available support details provided.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
ELBOW, PIPE
Solicitation # SPE7M3-26-T-8116
The contract is for 63 units of a 70-30 copper-nickel elbow pipe with a 45-degree flow angle and 2-inch nominal pipe size featuring socket-weld ends, identified by NSN 4730-01-436-0893. The item is procured under solicitation SPE7M3-26-T-8116 with a firm delivery deadline of 144 days after order, and the procurement is managed by the Department of Defense’s Fluid Handling Division. The supplier must comply with DLA packaging requirements, ensuring all documentation and materials meet specified standards. Each shipment must be accompanied by a Certificate of Quality Compliance (COQC), with one copy provided per manufacturing lot if multiple lots are involved, and each certificate must adhere to the Supplemental Quality Assurance Provision. The supplier is required to make the COQC available to Government inspectors at the source for review during material acceptance and must upload electronic copies of all certificates to the iRAPT system via the Receiving Report’s Attachment tab for official records. Government representatives may finalize acceptance via WAWF only after verifying proper COQC compliance and proper documentation upload. The contract was posted with a response deadline of August 20, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with Judy Mojica listed as the primary point of contact for inquiries and coordination.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332919
New
DIBBS
SEAL, CONICAL, FLARED
Solicitation # SPE7M3-26-T-8148
The contract pertains to the procurement of 50 units of a conical flared seal, identified by NSN 4730-01-610-3433 and part number AS4824N02, manufactured in compliance with SAE AS4824B Revision B dated November 1, 2007. Delivery is required within 20 days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods defined, including intermediate container details and palletization per DLA requirements. The item is subject to strict prohibition of Class I ozone-depleting chemicals, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and verification levels for attributes are designated as VII, IV, and II for critical, major, and minor characteristics respectively. The contractor must comply with CMMC Level 2 self-assessment requirements and manage configuration changes through formal engineering change proposals. A certificate of conformance is authorized unless overridden by a quality assurance letter. The delivery address and marking instructions are specified for Hoogerheide, Netherlands, with freight handled by DNEM00. The contract is issued under full and open competition, and all technical and quality requirements referenced are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONMETAL
Solicitation # SPE7M4-26-T-327A
This contract pertains to the procurement of a nonmetallic hose assembly designated by NSN 4720-01-371-1331 and part numbers AAEA0600, FA2406EGG0633AA, and 23511467, to be supplied by Rolls-Royce Solutions America Inc and Danfoss Power Solutions II LLC. The delivery requirement is for 71 units, with a strict quantity variance of plus or minus zero percent, and delivery must be completed within 165 days from the contract date, FOB origin. Inspection and acceptance are to occur at the destination, and the items must be packaged in accordance with MIL-STD-2073-1E and marked per MIL-STD-129 without any special marking codes. The packaging and palletization must comply with DLA’s packaging requirements, using specified methods for preservation, wrapping, and unit containment as outlined in the contract’s packaging data. The contract is issued under solicitation SPE7M4-26-T-327A with a response deadline of August 20, 2026, and a posted date of August 9, 2026. The end delivery date is set for February 2, 2027, replacing the original required delivery date of January 7, 2027. The delivery destination is DLA Distribution Anniston at 7 Frankford Ave, Building 362, Anniston, AL 36201-4199, with transportation instructions governed by DLAD Proc Note C19 for general shipping and C20 for first destination handling. The unit of issue is each, priced at $71.00 per unit, totaling $5,041. The contract references technical and quality requirements from the DLA Master List, which apply based on solicitation and award timelines. The point of contact is Blake Tushar, and the NAICS code is 332999 for other miscellaneous fabricated metal product manufacturing.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, ENGINE FU
Solicitation # SPE7M4-26-T-327L
This contract is for the procurement of a Parts Kit, Engine Fuel, identified by NSN 2910-00-355-7669 and part number 5199734, with a quantity of 190 units. The item is classified as a critical application item and must be supplied by either Rolls-Royce Solutions America Inc or Federal-Mogul Corporation DBA, as specified. The contract mandates strict compliance with DLA packaging and preservation standards per MIL-STD-2073-1E, Appendix D, for kits, and requires marking consistent with MIL-STD-129 without special marking codes. Packaging must adhere to DLA’s procurement requirements including palletization guidelines, and all items must be delivered FOB origin with zero variance allowed in quantity. The delivery schedule allows 191 days from the contract award, with a required ship date of February 28, 2027, and an original delivery deadline of April 6, 2027. The destination for delivery is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation protocols follow DLA procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and requires compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment. Suppliers must address potential casting or forging needs by submitting a request to DLA if special tooling is required. The procurement is conducted under a total small business set-aside, with the solicitation number SPE7M4-26-T-327L, and the unit of issue is each (EA). The unit price is $190.00, resulting in a total contract value of $36,100. Inspections and acceptance occur at the destination, and the contracting office is the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact. All documentation and compliance obligations must align with the latest applicable versions of referenced standards in effect as of the solicitation or award date.
Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CONN ROD RH HND SD
Solicitation # SPE7M4-26-T-327T
The contract pertains to the procurement of a right-hand connecting rod for a handle-side application, identified by part number 803-6397269 and NSN 2040014549209, with a quantity of 16 units to be delivered FOB origin within 165 days. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, enforcing zero non-conformances for acceptance unless otherwise stated. Attributes are classified with verification levels or AQLs, and unspecified features are treated as major. The product must be free of ozone-depleting chemicals and must not contain or come into direct contact with mercury or mercury compounds except for specific exempted applications like batteries, instruments, or sensors as defined by NAVSEA; portable mercury-containing devices must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with unit packaging including preservative methods, no cushioning material, and defined container codes, while palletization follows DLA packaging guidelines. Marking is to be standard with no special codes applied, and delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California. The contract requires full and open competition with no set-aside, and pricing is fixed at $16.00 per unit for a total value of $256. The solicitation, issued under contract number SPE7M4-26-T-327T, was posted on August 9, 2026, with responses due by August 20, 2026, and the original required delivery date is February 10, 2027, with a need ship date of February 2, 2027.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
RESTRICTOR UNIT, FLU
Solicitation # SPE7M3-26-T-8147
The contract is for a single Restrictor Unit, Fluid Flow, with NSN/Part Number 4730-01-535-6415, under solicitation SPE7M3-26-T-8147, issued as a Total Small Business Set-Aside under NAICS code 333998. The item is subject to strict export control regulations under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is required, and only DLA contractors with approved U.S./Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and authorized access may receive the technical information. The contract mandates adherence to DLA packaging standards, removal of government identification from non-accepted supplies, and incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified as a third-party assessment organization and must deliver the item within 165 days of award to New Cumberland, Pennsylvania, with William Cain designated as the primary point of contact.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details