Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

School Signage

Active

2027-004State & Local

Response Deadline09/10/2027, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

School District Five of Lexington and Richland Counties in South Carolina is soliciting competitive sealed proposals under solicitation number 2027-004 for the provision of interior and exterior signage across six school locations. The scope of work encompasses the full lifecycle of signage management, including the design, fabrication, delivery, and installation of new and replacement signs, as well as the removal and disposal of existing signage. This opportunity was posted on August 24, 2026, with a response deadline of September 10, 2027, at 3:00 PM. The project falls under NAICS code 339950 and is managed by the South Carolina SLED organization. Interested vendors are directed to coordinate with the primary point of contact at d5bids@lexrich5.org or utilize the official South Carolina procurement portal for further submission details.

General Info

Lexington and Richland School District seeks signage design, fabrication, and installation proposals by September 2027.

Agency

South Carolina → Lexington / Richland County School District Five

NAICS

339950 - Sign Manufacturing

Place of Performance

SC, USA

Set-Aside

NONE

Documents

1

Statement of Award for Solicitation 2022-025 Asbestos Abatement

award

Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedAug 24

Solicitation

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2027, 03:00:00 PM UTCin 11 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencySouth Carolina → Lexington / Richland County School District Five

Contacts1 person available

OfficeN/A

Organization / AgencySouth Carolina → Lexington / Richland County School District Five

Office AddressN/A

Contacts

D5bids

contact@example.gov

Full Description

Show more

School District Five of Lexington and Richland Counties is seeking competitive sealed proposals from qualified vendors to provide interior and exterior signage at six (6) school locations. Services may include design, fabrication, removal and disposal of existing signage, delivery, and installation of new and replacement signage in accordance with the requirements of this solicitation.

Similar Contracts

Same NAICS industry code

Vehicle Decals and Safety Tape Supply

City of Spokane

POSTED

DEADLINE

Traffic Signals

Solicitation # INF-2026-0426

The City of Houston is soliciting bids for the purchase of 50 McCain M17975 traffic signal backplates. These must be 4-section, 12-inch, louvered black aluminum units with a 5-inch border and standard mounting. All provided equipment must be new, unused, and of first quality. While the City prefers the specified model, bids for equal or superior products may be considered at the sole discretion of the City, provided the bidder includes a detailed explanation of any deviations. The selected vendor must deliver the fully assembled units to Traffic Operations at 2200 Patterson, Houston, TX 77007, within 10 calendar days of receiving the purchase order. Deliveries are required between 6:30 a.m. and 2:30 p.m., Monday through Friday, and must be shipped FOB Destination, Freight Pre-Paid. Each shipment must include a detailed delivery ticket, and the delivery vehicle must be capable of offloading the units. City personnel will have 10 business days to inspect the goods for defects or damage before final acceptance. Awarding will be based on the overall low net bid from a responsive and responsible bidder, though the City reserves the right to award by individual item or combination of items. Bidders must maintain their quoted pricing for at least 90 days. Payment is due 30 days after invoice approval or acceptance of goods. Compliance requirements include certifications against human trafficking, non-collusion, and various Texas Government Code anti-boycott mandates regarding Israel, energy companies, and firearm entities.

City of Houston

POSTED

DEADLINE

Manufacture and Supply of Minefield Marking Signs

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

ADA-Compliant Medical Exam Table SupplierThis subcontract agreement establishes a partnership to supply ADA-compliant medical exam tables for prime contractors working on City of Houston procurement projects. The supplier is responsible for manufacturing or sourcing tables that meet specific technical requirements, including an adjustable height range of 15.5 to 28.7 inches, a weight capacity of 396 lbs, and 45-degree stirrup rotation. All units must feature antimicrobial upholstery available in either Black or Midnight Express to ensure clinical standards and accessibility compliance. The supplier is required to deliver the medical exam tables fully assembled and tested on an FOB destination basis. This procurement falls under NAICS code 339950 and is specifically tailored to support infrastructure and healthcare projects within the City of Houston, Texas.

City of Houston

POSTED

DEADLINE

SIGN, MINEFIELD MARKING

Solicitation # SPE8E6-27-T-0165

Solicitation SPE8E6-27-T-0165 is a fixed-price request for quotations issued by the Defense Logistics Agency Distribution San Joaquin for the procurement of 1,965 minefield marking signs, identified by NSN 9905-01-066-9547. The contract requires delivery to Tracy, California, with a need ship date of September 30, 2026, and an original required delivery date of March 8, 2027. Delivery is established as FOB Origin under the First Destination Transportation program, with a delivery window of 81 days after order. Inspection and acceptance will occur at the destination. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, QAP EQ003, and the provision of a Certificate of Quality Compliance. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129 and MIL-STD-130N. The solicitation emphasizes compliance with the Buy American Act and the Berry Amendment, and it explicitly prohibits the use of additive manufacturing unless authorized. Payment will be processed electronically through the Wide Area WorkFlow system. Offerors are encouraged to submit quantity ranges via DIBBS and may be eligible for a price evaluation preference if they are SBA-certified HUBZone small business concerns.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Wayfinding Signage FabricationThis subcontract agreement with PIPE-Engineering involves the fabrication and delivery of 36 custom pedestrian and vehicular wayfinding signs for municipal projects within the City of Montgomery. All signage must be produced in strict accordance with the 2026 Edition of the Alabama Department of Transportation Standard Specifications for Construction, utilizing ALDOT-compliant materials to ensure necessary durability and visibility. The scope of work includes the full fabrication process and the final delivery of the completed signs directly to the designated project site. This opportunity is categorized under NAICS code 339950, with a response deadline set for November 17, 2026.

PIPE-Engineering

POSTED

DEADLINE

in about 1 month

BHSU Campus Wayfinding & Signage Project – Phase 1

Solicitation # 26RFP19977

Black Hills State University is soliciting proposals for the BHSU Campus Wayfinding and Signage Project Phase 1 to fabricate, furnish, deliver, and install a comprehensive campus signage system. The selected vendor will be responsible for providing all labor, materials, and equipment to produce 11 pedestrian signs, 24 building signs, 10 vehicular signs, and 25 Village Square signs and brackets, along with necessary mounting hardware. The project requires strict adherence to the 2026 Wayfinding Design System Guide and involves key deliverables such as shop drawings and material samples for university approval. Performance is expected to begin in October 2026, with substantial completion targeted by May 1, 2027. The procurement is a competitive negotiation process where the state will award the contract based on a comparative assessment of proposals to determine the best interest of the State of South Dakota. Vendors must provide a single, all-inclusive lump sum price and maintain significant insurance coverages, including 1,000,000 dollars each for Commercial General Liability, Professional Liability, and Business Automobile Liability. Proposals must be submitted in PDF format to Barb Mustard by October 22, 2026, and must include an executive summary, a detailed technical response, and a separate cost proposal. Mandatory certifications regarding non-discrimination, debarment, and prohibited foreign entities are required for all offerors.

South Dakota State Government

POSTED

DEADLINE

Two-Year Contract to Purchase Aluminum Sign

Solicitation # 212

The Jefferson Parish Government is soliciting bids for a two-year contract to supply aluminum sign blanks for the Traffic Engineering Division's East and West Banks. The materials will be used to fabricate traffic signage for parish roadways and must consist of various sizes, shapes, and thicknesses of flat sheets and blanks. All products must conform to ASTM Specification B-209-14, Alloy 5052-H38, and feature a chromate-type chemical conversion coating, such as Alodine No. 1200F, conforming to MIL-C-5541 or ASTM B-449. This coating must impart a golden coloration and resist a minimum of 168 hours of salt spray exposure. Strict fabrication standards apply, requiring sheared or die-cut edges with all radii and holes deburred; sawed edges are prohibited. Dimensional tolerances are set at plus or minus 1/32 inch, with squareness within 1/16 inch and flatness within 1/16 inch per foot. The contract will be awarded to the lowest responsive and responsible bidder. To be considered responsive, bidders must submit a notarized bid affidavit including campaign contribution disclosures and certifications regarding legal citizenship and workers compensation insurance per LA. R.S. 23:1726(B). Bidders must also provide a signed proposal from an authorized agent, supported by a corporate resolution or similar evidence of authority. The apparent low bidder is required to provide final insurance certificates complying with Jefferson Parish Resolutions No. 136353 or No. 141125 within ten calendar days of the bid opening. Required insurance includes Commercial General Liability and Comprehensive Automobile Liability naming the Parish of Jefferson as an additional insured, as well as Worker's Compensation and Builder's Risk insurance.

Jefferson Parish Government

POSTED

DEADLINE

Custom Sign Fabrication & Manufacturing

Operations & Regulatory Management

POSTED

DEADLINE

Solicitation # 26-8684

Solicitation 26-8684, issued by the Collier County Board of County Commissioners, seeks to establish a pool of pre-qualified contractors to provide comprehensive signage services. The scope of work includes the design, fabrication, manufacture, delivery, installation, repair, replacement, removal, and disposal of a wide array of interior and exterior signage, such as wayfinding, regulatory, monument, ADA-compliant, and LED electronic message displays. All work must strictly adhere to the County's approved Graphic Standards and branding guidelines to ensure visual consistency. The intended agreement term is two years, with three optional one-year renewals and a possible extension of up to 180 days. The County will award the solicitation to a pool of contractors, with individual projects up to 500,000 dollars assigned via Requests for Quotes. For projects exceeding 15,000 dollars, awards are based on the lowest-priced, responsive, and responsible contractor, while projects under 15,000 dollars follow a rotation process. Contractors must maintain valid insurance, provide a 5 percent proposal bond, and secure performance and payment bonds for projects over 200,000 dollars. Required qualifications include a State of Florida Certified General Contractor or Specialty Contractor License for Signs, E-Verify enrollment, and a valid Business Tax Receipt. Payments are governed by the Local Government Prompt Payment Act and are subject to appropriation by the Board of County Commissioners.

Operations & Regulatory Management

POSTED

DEADLINE

Digital Signage Hardware SupplierThis subcontract agreement establishes a partnership for the supply of digital signage hardware for prime contractors working on projects for the Southwick-Tolland-Granville Regional School District in Massachusetts. The scope of work includes the provision of LED display panels and a message center equipped with cloud or website-based programming interfaces. To ensure proper installation and design, the supplier is responsible for providing detailed equipment specifications and graphic representations of the completed signs. The supplier is tasked with the delivery of all necessary hardware and the provision of access to the required programming software. All equipment is covered by a standard 5-year warranty. This procurement opportunity is categorized under NAICS code 339950, with performance taking place at the district location on Powder Mill Road in Southwick.

STG - Southwick-Tolland-Granville Regional School District

POSTED

DEADLINE

Southwick Regional School Digital Sign Project

Solicitation # BD-27-1232-STG-STG-134051

The Southwick-Tolland-Granville Regional School District is soliciting quotes for the Southwick Regional School Digital Sign Project, located at 93 Feeding Hills Rd., Southwick, MA. The scope of work includes the removal and disposal of an existing 6 by 8 foot illuminated sign and the installation of a new two-sided 2 by 7.5 foot LED internally illuminated school sign and a 3 by 7.5 foot electronic double-face message center display with 10 mm resolution. The project requires connecting the new sign to existing electrical service, providing cloud or website-based programming capabilities, and including a standard 5-year warranty. The estimated total for the project is 35,000 dollars, and the contract will be awarded to the responsible, qualified vendor offering the lowest price that meets all specifications. To be deemed qualified, vendors must demonstrate experience with at least five comparable projects completed within the last three years and employ their own installation personnel. Mandatory submission requirements include a complete cost breakdown, a graphic representation of the finished sign, equipment specifications, a proposed completion timeline, and a description of programming support and training. Additionally, vendors must provide a 50 percent payment bond, a certificate of insurance including workers compensation, and proof of OSHA training for installation staff. All work is subject to prevailing wage laws and requires the execution of a Certificate of Non-Collusion and a Massachusetts Tax Compliance Certificate. Quotes must be submitted to Nicholas Bernier by October 23, 2026, at 3:00 PM.

STG - Southwick-Tolland-Granville Regional School District

POSTED

DEADLINE

More opportunities from South Carolina → Lexington / Richland County School District Five

Same awarding agency

Signage Installation & RemovalThis subcontract for the Lexington / Richland County School District Five in South Carolina involves the installation of new interior and exterior signage and the removal of existing signs across six different school locations. The scope of work includes mounting signs to walls and buildings, installing exterior poles, and utilizing ladders and lifts to complete the tasks. The contractor is responsible for delivering fully installed signage and ensuring the sites are cleared of all debris. The project falls under NAICS code 238990 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 10, 2027, at 3:00 PM. Further details regarding this opportunity can be accessed through the South Carolina Business Opportunities portal.

All Other Specialty Trade Contractors

POSTED

about 2 months ago

DEADLINE

Signage Fabrication (Manufacturing)This subcontract for Signage Fabrication involves the supply and manufacture of both interior and exterior physical signs for prime contractors working on projects for the Lexington / Richland County School District Five in South Carolina. The scope of work includes the production of signs using materials such as acrylic, aluminum, vinyl, and PVC, utilizing specialized equipment including CNC routers, large-format printers, and vinyl cutters. The contractor is responsible for the delivery of all completed signage to the designated project sites or the installation team. This opportunity falls under NAICS code 339950 and has a response deadline of September 10, 2027.

Sign Manufacturing

POSTED

about 2 months ago

DEADLINE

Signage Design & Graphic ServicesThis subcontract for Signage Design and Graphic Services involves providing creative and technical design for both interior and exterior school signage within the Lexington / Richland County School District Five in South Carolina. The selected provider will be responsible for developing visual layouts, ensuring branding alignment, and producing technical specifications for fabrication using professional graphic design software. The final deliverables include design proofs and production-ready artwork files to be used by prime contractors. The opportunity is categorized under NAICS code 541430 and was posted on August 24, 2026. Interested parties must submit their responses by the deadline of September 10, 2027, at 3:00 PM. Further details and submission guidelines can be accessed through the South Carolina Business Office portal.

Graphic Design Services

POSTED

about 2 months ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS