This Solicitation opportunity from Department Of Defense was posted on May 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

SCREW, MACHINE

Closed

SPE4A6-26-T-40T6Federal

Submission Closed05/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332112

New

Federal

53--BOLT,MACHINEThe contract is a procurement solicitation for 60 units of NSN 5306014566917 BOLT, MACHINE, intended for delivery to DLA Distribution location W1A8 within 171 days after order. The approved source for this item is identified as 16258 SLB487A4-18. This procurement is conducted as a Request for Quote (RFQ), with all quotes requiring electronic submission and consideration of any responsible source that submits timely responses. The solicitation does not provide specifications, plans, or drawings and is accessible only electronically through the provided link. This acquisition is designated as a Service-Disabled Veteran-Owned Small Business (SDVOSBC) set-aside under NAICS code 332112. The contract is managed by DLA Aviation, part of the Department of Defense, through its Richmond, VA office. Interested parties seeking further details or with inquiries should contact the listed buyer via email as indicated in the solicitation documents or use the online portal for access to the solicitation and submission of quotes. The deadline for submitting responses is June 24, 2026.

POSTED

DEADLINE

Supply of BETEK B43/3 Auger Drilling Bits (Alternative Source)The contract involves the procurement and delivery of 20 long tons of BETEK B43/3 auger drilling bits, which are designed to be compatible with C20 series blocks. These drilling bits are to be packaged in buckets containing 75 bits each. The opportunity is posted by Nashville Electric Service, located in Nashville, Tennessee, and is classified under the NAICS code 332112, which covers metal forging services. The solicitation was announced on June 12, 2026, with a response deadline set for June 18, 2026. This contract is issued as a subcontract opportunity, aimed at securing an alternative source for the specified auger drilling bits. Additional details and submissions can be accessed through the provided vendor portal link associated with Nashville Electric Service.

Nashville Electric Service

POSTED

DEADLINE

Supply of Kennametal C23 Auger Drilling BitsThe contract involves the procurement and delivery of 20 long tons of Kennametal C23 auger drilling bits, which are compatible with C20 series blocks. These bits are to be packaged in buckets of 75 pieces each, ensuring standardized packaging for ease of handling and distribution. The solicitation was posted on June 12, 2026, with a response deadline set for June 18, 2026. This subcontract falls under the NAICS code 332112, which pertains to metal cutting and forming machine tool manufacturing. The contracting agency is Nashville Electric Service located in Tennessee, with the place of performance specified as Nashville. The contract does not specify any set-aside type or organization type requirements. While specific contact details are not provided, interested vendors are directed to submit their bids through the official vendor portal. This procurement aims to support the agency’s operational needs by ensuring a reliable supply of drilling bits essential for its ongoing or upcoming drilling projects.

Nashville Electric Service

POSTED

DEADLINE

Precision Metal Stamping & Forming – Transitions and StilesThis subcontract, issued by the Department of Defense's Navsup Fleet Logistics Center Puget Sound, calls for the manufacture of transition pieces and stiles that require precision metal stamping, forming, and bending operations according to specific architectural drawings identified as P-1020 and P-1035. The contract emphasizes high-quality fabrication processes to meet detailed design specifications, ensuring components are produced with accuracy and consistency. It is designated as a Total Small Business Set-Aside under FAR 19.5, highlighting the intent to award to qualified small businesses. The solicitation, categorized under NAICS code 332112 for metal stamping, was posted on June 12, 2026, with responses due by June 18, 2026. While specific location details for performance are not provided, the contract’s scope involves specialized manufacturing services crucial to supporting military or government infrastructure projects. The opportunity is accessible via a federal contracting portal, allowing eligible small business subcontractors to submit proposals for this precision manufacturing work.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

59--SWITCH,PRESSUREThe contract involves the procurement of 44 units of a pressure switch, identified by NSN 5930014404986, to be delivered to the Defense Logistics Agency (DLA) Distribution San Joaquin within 168 days after order. The approved source for this item is specified as 19278 222-10NB31-2223495. The solicitation is an electronic Request for Quote (RFQ), and quotes must be submitted electronically; no hard copies or physical documents like specifications or drawings are provided. This procurement is open to all responsible sources, with all timely submissions guaranteed consideration. The solicitation, numbered SPE7M826T4792, was posted on June 11, 2026, with a response deadline of June 22, 2026. The procurement falls under the NAICS code 332112 and is managed by the DLA Land and Maritime office located in Columbus, Ohio. Questions about the solicitation are to be directed via email to the designated buyer as noted in the solicitation document or through the provided DIBBS website link. This combined type contract does not specify any set-aside type or restrictions, ensuring a broad opportunity for interested suppliers to participate.

DLA Land And Maritime

POSTED

6 days ago

DEADLINE

in 5 days

AI Contract Overview

This contract is for the procurement of 2,760 units of machine screws, identified by NSN 5305-00-033-4913, in accordance with the part number MS9316-06 and adhering to non-government standards AS9316 and SAE AS7454A. The screws are defined as commercial items and must be manufactured to the current revision of the applicable military or consensus standards. Quality and technical requirements referenced in the DLA Master List apply, including detailed packaging and marking protocols under MIL-STD-129 and ASTM D3951, with government identification removed from non-accepted supplies. Inspection and acceptance will occur at the destination, with sampling methodologies following MIL-STD-1916 or ASQ H1331 standards, focusing on criticality levels and zero tolerance for non-conformance unless otherwise specified. The contract delivery is FOB origin with a required delivery timeline of 69 days post-award, and a need-by ship date of July 20, 2026, with final delivery expected by February 2, 2028. All items will be packed and palletized per DLA packaging requirements to ensure compliance with shipping and handling protocols. The contract is issued by the Defense Logistics Agency’s ASC Commodities Division and the place of performance is Tinker Air Force Base, Oklahoma. The solicitation was posted on May 3, 2026, with a response deadline of May 11, 2026. The point of contact for this procurement is Hannah Shimer.

General Info

Procurement of 2,760 machine screws per military standards, delivery by February 2028, FOB origin.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332112 - Nonferrous Forging View NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-40T6.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 3

Solicitation

Response DeadlineMay 11

Deadline has passed

Submission Closed

05/11/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Hannah Shimer

contact@example.gov

Full Description

SCREW,MACHINE
SCREW, MACHINE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
WSDC 01F Special Project NSN.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
INCLUDE ZD050 OBJECT TEXT ID ST
CRITICAL APPLICATION ITEM
SPE4A6-26-T-40T6
SECTION B
IAW BASIC NON GOVT STD AS9316
REVISION NR A DTD 03/01/2004
PART PIECE NUMBER: P/N MS9316-06
IAW REFERENCE NON GOVT STD SAE AS7454A
REVISION NR A DTD 07/01/2009
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016476097 0001 EA 2,760.000
NSN/MATERIAL:5305000334913
DELIVERY (IN DAYS):0069
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:025
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
SPE4A6-26-T-40T6
SECTION B
PR: 7016476097 PRLI: 0001 CONT’D
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:07/20/2026 Original Required Delivery Date:02/02/2028
SPE4A6-26-T-40T6 NSN/Part Number: 5305-00-033-4913 Quantity: 2,760 EA Purchase Request: 7016476097QTY: 2760 Delivery: 69 days ADO