Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

SEALING COMPOUND

Open
SPE8ES-27-T-0339Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE8ES-27-T-0339 is a procurement issued by the Defense Logistics Agency for the supply of three kits of sealing compound, identified by NSN 8030-01-600-2619. The product is a two-part kit, with each kit consisting of a 1-pint (12 fl oz) volume, and is classified as a critical application item. The material has a non-extendable shelf life of nine months and is designated as hazardous, requiring the submission of a Safety Data Sheet prior to award. Delivery is required within 20 days to the U.S. Naval Air Station Sigonella in Italy, with the original required delivery date set for November 16, 2026. The contract specifies destination inspection and acceptance, utilizing a zero-based sampling plan in accordance with MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including specific requirements for hazardous materials and shelf-life marking. Administratively, the contractor must use the Wide Area WorkFlow system for invoicing and payment. The procurement incorporates various FAR and DFARS clauses covering cybersecurity reporting, the Buy American Act, and prohibitions on covered defense telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

General Info

DLA procurement for three hazardous sealing compound kits delivered to Italy by 2026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

325520 - Adhesive Manufacturing

Place of Performance

PSC 812 BOX 0037, FPO, AE, 09627-0001, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

Read the document

Due in 8 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 8 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → Defense Logistics Agency
Office AddressUSA
Contacts
Stephen Ockenhouse
Sign up to see this detail

Full Description

Show more
SEALING COMPOUND
SEALING COMPOUND
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information.
U/I = KT
SIZE: 1 PINT KIT (12 FL oz)
TWO PARTS KIT.
RS009: Shelf-life requirement RS001 for a TYPE I (CODE G) item with a shelf life of 9 months (non-extendable) applies to this item.
SPE8ES-27-T-0339
SECTION B
CRITICAL APPLICATION ITEM
PRC DESOTO INTERNATIONAL INC 85570 P/N PR-1772
PRC-DESOTO INTERNATIONAL, INC. 5HCF1 P/N PR-1772
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019109063 0001 KT 3.000
NSN/MATERIAL:8030016002619
DELIVERY (IN DAYS):0020
DELIVER FOB: DESTINATION
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:HM CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:33 -33 Type II, shelf life
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
N67022
ASD SIGONELLA
OIC, AVIATION SUPPORT DET SIGONELLA
PSC 812 BOX 0037
FPO AE 09627-0001
US
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
N67022
SPE8ES-27-T-0339
SECTION B
PR: 7019109063 PRLI: 0001 CONT’D
U.S. NAVAL AIR STATION SIGONELLA
DLA WAREHOUSE-BLDG 452 NAS 2
STRADA STATALE 417 CATANIA/GELA
SIGONELLA 95040
IT
M/F: (TCN) N670226314FL71
RDD: 777
PROJ: AO5 TP 2
SUPP ADD: Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A41 DIST: A9B ADV: FC: UB
Need Ship Date:00/00/0000 Original Required Delivery Date:11/16/2026
SPE8ES-27-T-0339 NSN/Part Number: 8030-01-600-2619 Quantity: 3 KT Purchase Request: 7019109063QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 325520
New
DIBBS
Supply of Specialized Adhesive (NSN 8040-01-621-9702)This subcontract involves the supply of specialized adhesive materials meeting NSN 8040-01-621-9702 specifications to support prime contractors for Defense Logistics Agency Troop Support Construction and Equipment supply contracts. The scope of work requires the delivery of the physical adhesive along with corresponding Safety Data Sheets compliant with 29 CFR 1910.1200(g) and Federal Standard No. 313. All materials must be delivered using DLA-compliant packaging in accordance with RP001. The contract is managed under NAICS code 325520 for the Department of Defense and is performed at Cherry Point, zip code 28533-5000. The solicitation was posted on November 15, 2026, with a response deadline of November 23, 2026.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
Turnlock Fastener Assembly SupplierThis subcontract involves the supply of Turnlock Fastener Assemblies, specifically part number NSN 7019148706, to prime contractors supporting DLA supply contracts. The scope of work requires the delivery of two units, which must be packaged and marked in strict accordance with military specifications MIL-STD-2073-1E, RP001, and MIL-STD-129. The contract is issued under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. Interested parties should note the posting date of November 15, 2026, and the response deadline of November 23, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0347
Solicitation SPE8ES-27-T-0347 is a federal procurement issued by the Defense Logistics Agency for the supply of red adhesive, NSN 8040-01-621-9702, in 250 mL containers. The requirement is for one unit with a non-extendable shelf life of 12 months, requiring storage between 46-70°F. Delivery is specified as FOB Destination to the DLA Aviation Hazmat Center at MCAS Cherry Point, North Carolina, with a required delivery window of 20 days. As the item is classified as hazardous material, the supplier must submit Safety Data Sheets and Hazard Communication Standard labels for review and approval prior to award in accordance with 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically utilizing special marking code 32 for shelf-life items. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, the Buy American Act, and the use of the Wide Area Workflow system for electronic invoicing and payment.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE4A5-27-T-2822
Solicitation SPE4A5-27-T-2822, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of six cartridges of a thermally conductive, electrically insulating silicone adhesive (NSN 8040-01-334-7599). This material is designed for use as an adhesive, sealant, or potting compound on electronic circuit boards and has a non-extendable shelf life of six months. The item must be stored at temperatures between 60 and 80 degrees Fahrenheit, as indicated by Storage Code D. Delivery is required within 20 days after order, with the original required delivery date set for November 5, 2026, shipped FOB Destination to Grand Forks AFB, North Dakota. The contract mandates strict adherence to quality and safety standards, requiring the submission and technical approval of a Safety Data Sheet and OSHA Hazard Warning Label prior to award. Packaging must be the original manufacturer's unit packaging, as repackaging is prohibited, and must comply with MIL-STD-2073-1E and RP001. Marking must follow MIL-STD-129, including the lot or batch number and special marking code 32. Inspection and acceptance will occur at the destination per FAR 52.246-1. Invoicing and payment shall be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
Supply of Anaerobic Adhesive (Fibersure)This subcontract involves the supply of Fibersure anaerobic adhesive, identified by NSN 6099-01-563857-1, to support prime contractors delivering on DLA supply contracts. The work is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain, with the place of performance located in Fort Hood, Texas. The contractor is responsible for ensuring all materials are properly marked according to MIL-STD-129 and palletized in strict compliance with RP001 DLA Packaging Requirements for Procurement. The scope of work concludes with the delivery of the correctly processed and packaged adhesive material.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
Bevel Gear Forging and ToolingThis subcontract for Bevel Gear Forging and Tooling, issued by the Department of Defense under DLA Weapons Support LSO Combat Vehicles and Armament, involves the design and manufacture of custom forging dies and tooling to produce gear blanks. The selected contractor will perform forging processes on raw materials according to specific technical drawings to support prime contractors. Deliverables include the finished forged gear blanks along with all necessary material certifications. The opportunity is set aside for Service-Disabled Veteran-Owned Small Businesses and requires performance in New Cumberland. To be eligible, contractors must maintain ISO 9001:2015 certification and hold active ITAR/EAR registrations. Additionally, strict compliance with the Buy American Act and the Berry Amendment is mandatory for this project.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 325520
New
DIBBS
Supply of Sealing Compound P/N PR-1772This subcontract involves the supply of proprietary sealing compound kits, specifically Part Number PR-1772 Type II Class B-1, to support Defense Logistics Agency supply contracts. Sourced from Desoto International Inc., the agreement requires the delivery of two kits to Pt Mugu, California, on a FOB Destination basis. The contract emphasizes strict quality and safety standards, requiring full supply chain traceability and a minimum shelf life of nine months upon delivery. Compliance is mandatory with the Hazard Communication Standard 29 CFR 1910.1200 and sampling protocols defined by MIL-STD-1916 or ASQ H1331. Operating under NAICS code 325520, this procurement is managed through the Department of Defense to ensure the delivery of critical materials to the NAWC facility in Pt Mugu.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
Sealing Compound Supply (NSN 8030008237953)This subcontract involves the supply of one specialized sealing compound kit for prime contractors working on Defense Logistics Agency Troop Support projects. The material must strictly adhere to NSN 8030008237953 specifications, with a total kit volume ranging between 128 and 512 fluid ounces. To ensure safety and regulatory compliance, the provider must include Safety Data Sheets consistent with 29 C.F.R. 1910.1200. Logistical requirements mandate that packaging be performed according to MIL-STD-2073-1E, marking follow MIL-STD-129, and palletization meet RP001 standards. The contract falls under NAICS code 325520 and specifies a place of performance in FPO 96306-1204. Interested parties must respond by November 18, 2026.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
Supply of Thermally Conductive Silicone AdhesiveThis subcontract involves the supply of thermally conductive and electrically insulating silicone adhesive to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The requirement is for three 12-ounce cartridges of genuine Parker-Hannifin part number 65-01-1641-0000, identified by NSN 8040-01-334-7599. The materials must be maintained under Storage Code D at temperatures between 60 and 80 degrees Fahrenheit. Deliveries are to be made FOB Destination to San Diego, California. All items must be packaged in original manufacturer units in accordance with MIL-STD-129 and must include the necessary SDS and OSHA labeling. The opportunity was posted on November 12, 2026, with a response deadline of November 20, 2026, under NAICS code 325520.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
Silver-Filled Conductive Epoxy SupplierThis subcontract involves the supply of silver-filled conductive epoxy adhesive kits to prime contractors supporting the Defense Logistics Agency. The supplier is responsible for manufacturing epoxy resin and hardener that adheres to Federal Specification MMM-A-1931, Type II, ensuring a volume resistivity of 0.003 ohms/cm. Quality control must be strictly maintained using multimeters that conform to MIL-STD-202 Method 303. The scope of work requires the delivery of 11 kits, with materials packaged into syringes and accompanied by mixing cups. All delivered products must have a minimum of 85% shelf life remaining. Performance for this contract is centered at Hill AFB, falling under NAICS code 325520 for the Department of Defense.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
Supply of Specialized Adhesive (NSN 8040012685916)This subcontract through the Defense Logistics Agency involves the supply of 12 kits of specialized adhesive, identified by NSN 8040012685916, to support prime contractors for DLA Troop Support Construction and Equipment contracts. The materials are to be delivered FOB Destination to Marine Aviation Logistics Sq 26 in Jacksonville. The contractor must adhere to strict technical and safety standards, including packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129. Because the adhesive is classified as hazardous material, the provider must follow RP001 and IP025 guidelines, maintain a storage temperature at or below 77 degrees Fahrenheit, and submit a Safety Data Sheet in accordance with 29 C.F.R. 1910.1200.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-27-T-0331
This procurement is for the supply of silver-filled, conductive epoxy adhesive conforming to Federal Specification MMM-A-1931, Type II, with a required volume resistivity of 0.003 ohms/cm. The contract specifies the delivery of kits containing 2.5 grams of epoxy resin and hardener packaged in syringes with mixing cups. Technical compliance requires volume resistivity measurements to be performed in triplicate using specific equipment, including multimeters conforming to MIL-STD-202 Method 303. The items are Type II shelf-life products with a 6-month lifespan, requiring a minimum of 85% shelf life remaining upon receipt. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with materials stored between 60 and 80 degrees Fahrenheit. Depending on the kit volume, packaging options include E6 boxes, D3 or 4G boxes for hazardous materials, or heat-shrink and blister pack methods. As the material is hazardous, suppliers must provide Safety Data Sheets and Hazard Communication Standard labels per 29 CFR 1910.1200. Delivery is required within five days to Hill Air Force Base, Utah. The contract incorporates various FAR and DFARS clauses, including requirements for basic safeguarding of covered contractor information systems and prohibitions on certain covered defense telecommunications equipment.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 339999
New
DIBBS
Identification Marker Manufacturing and SupplyThis subcontract involves the manufacturing and supply of identification markers under NSN 7690-01-675-6387 for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected provider is responsible for sourcing or producing markers that strictly adhere to NSN specifications and ensuring all items are marked according to MIL-STD-129 standards. A critical requirement of the contract is the management of shelf-life for TYPE I CODE H items, which must maintain a minimum shelf life of 12 months upon delivery. The project falls under NAICS code 339999 and requires the coordination of shipping via traceable methods to the designated place of performance in FPO 96694-7100. Interested parties must respond by November 27, 2026, to fulfill the delivery requirements for these specialized identification markers.
All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335110
New
DIBBS
Headlight Unit SupplierThis subcontract involves the supply of headlight units identified by NSN 6220-01-738-5428 for prime contractors working on Defense Logistics Agency Troop Support projects. The selected supplier is responsible for delivering one headlight unit that meets all technical specifications, with performance taking place at Fort Stewart. The contractor must adhere to strict compliance standards, including packaging requirements per RP001 and the removal of government identification from non-accepted supplies as per RQ011. Additionally, the supplier is required to provide all necessary documentation for the Source Approval Request. The opportunity is categorized under NAICS code 335110 and was posted on November 15, 2026, with a response deadline of November 27, 2026.
Electric Lamp Bulb and Part Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
Supply of PULLTHROUGH SMALL A (NSN 1005-0162-8846-8)This subcontract involves the supply of four units of PULLTHROUGH SMALL A hardware, identified by NSN 1005-0162-8846-8, for prime contractors working with the Defense Logistics Agency. The provider is responsible for manufacturing or sourcing the items in strict accordance with the DLA Master List Technical and Quality Requirement RA001. Compliance with federal standards is mandatory, specifically adhering to MIL-STD-129 for all shipment marking and packaging, as well as DFARS 252.225-7001 Buy American standards. The contract falls under NAICS code 332510 and specifies a place of performance in FPO 09581.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332911
New
DIBBS
Check Valve SupplierThis subcontract opportunity is for a supplier to provide three specialized check valves to the Defense Logistics Agency at a government facility in Fort Eustis. The selected provider must manufacture or source valves that strictly adhere to DLA technical data specifications and ensure all components are of domestic origin. Eligible candidates must maintain an active SAM registration, including a valid UEI and CAGE code. Compliance with FAR 52.222-50 and DFARS 252.204-7016 is mandatory. Interested parties must submit their responses by November 27, 2026.
Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488510
New
DIBBS
International Heavy Equipment Transport (USA to Japan)This subcontract, issued by the Defense Logistics Agency under a Total Small Business Set-Aside, involves the international transport of a shearing machine from its point of origin in the United States to the Sagami Storage Facility in Japan. The scope of work encompasses comprehensive logistics services, including inland transport, ocean freight, and the management of all necessary customs documentation. Due to the nature of the cargo, the contractor must utilize heavy-lift shipping containers or flat-rack equipment to ensure safe delivery to the Sagamihara destination. Compliance is a critical component of this agreement, as the contractor must adhere to U.S.-flag vessel requirements and follow DFARS 252.225-7048 regulations regarding the transport of export-controlled items. The opportunity is categorized under NAICS code 488510, with a response deadline set for November 27, 2026.
Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488991
New
DIBBS
Military-Grade Packaging and CratingThis subcontract opportunity with the Defense Logistics Agency involves the specialized packaging and securing of a shearing machine intended for international transit to Japan. The selected contractor will be responsible for utilizing industrial crating materials to ensure the equipment is securely packaged and labeled for overseas shipment, strictly adhering to MIL-STD-2073-1E and RP001 standards. Additionally, the contractor must apply all necessary hazard warning labels in compliance with DFARS 252.223-7001. This procurement is designated as a Total Small Business Set-Aside under NAICS code 488991. Interested parties must submit their responses by November 27, 2026. The primary objective of the contract is to provide prime contractors on DLA supply contracts with a fully secured and compliant unit ready for international delivery.
Packing and Crating

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333517
New
DIBBS
Shearing Machine SupplyThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, requires the manufacture or sourcing of one shearing machine identified by NSN 3445-01-566-2866. The selected provider must ensure the equipment meets all technical specifications associated with the national stock number and strictly adheres to DFARS 252.223-7008, which prohibits the use of hexavalent chromium. The scope of work includes the final delivery of the completed machine to the designated destination. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 333517. Interested parties must submit their responses by the deadline of November 27, 2026. This procurement is intended to support prime contractors fulfilling DLA supply contracts.
Machine Tool Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
DIBBS
First Article Test (FAT) PerformanceThis subcontract opportunity, posted by the Defense Logistics Agency under the Department of Defense, involves performing First Article Testing for prime contractors on supply contracts. The selected provider will execute specific test protocols to validate that manufactured space heaters adhere to Technical Data Package and Quality Assurance Plan standards. Using specialized testing facilities, the contractor will verify product performance and safety, ultimately delivering a certification report confirming that the items meet all required specifications. The project is designated as a Total Small Business Set-Aside under NAICS code 541330, with the place of performance located in Augusta, Maine. Interested parties must respond by November 27, 2026. This effort ensures that critical heating equipment meets rigorous military standards before full-scale production and delivery.
Engineering Services

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Space Heater Supply (NSN 4520014318927)This subcontract involves the manufacture and supply of two specialized space heaters, identified by NSN 4520014318927, for prime contractors supporting the Defense Logistics Agency. The production must strictly adhere to TDP Rev A Gen 1 specifications and comply with quality assurance requirements QAP 13873, QAP-EQ003, and QAP 14153. Additionally, all items must be packaged according to ASTM D3951 and marked and labeled in accordance with MIL-STD-129. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910, with performance taking place in Augusta. Interested parties must respond by November 27, 2026, to fulfill the requirements of the Department of Defense.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 483211
New
DIBBS
U.S.-Flag Ocean and Inland Freight TransportThis subcontract for the Defense Logistics Agency involves the transport of commodities from the port of loading to the port of final discharge for prime contractors. The scope of work requires the coordination of both ocean and inland freight utilizing U.S.-flag vessels to ensure delivery to the final destination. The contractor is responsible for reporting critical shipment data, including carrier names, cubic feet, and gross weight. The performance of these services is centered in Fort Wainwright, Alaska. Interested parties should note that the response deadline for this opportunity is November 27, 2026. The contract falls under NAICS code 483211, focusing on specialized freight transport services to support Department of Defense supply chains.
Inland Water Freight Transportation

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Military Shipment Marking and LabelingThis subcontract for Military Shipment Marking and Labeling involves providing specialized marking services for commodities intended for prime contractors under Defense Logistics Agency supply contracts. The primary objective is to apply labels and markings to shipping containers and pallets to ensure full traceability and storage compliance, strictly adhering to MIL-STD-129 labeling systems. The work will be performed at Fort Wainwright, Alaska, under NAICS code 561910. Interested parties must submit their responses by November 27, 2026, for this Department of Defense requirement.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
DLA Compliant Packaging and PalletizationThis subcontract for the Defense Logistics Agency involves the palletization and packaging of commodities for prime contractors. The selected provider must utilize industrial palletization equipment and DLA-standard materials to ensure all shipments are prepared strictly in accordance with RP001 packaging requirements for procurement. The final deliverable is a palletized shipment that is fully ready for transport. The work is to be performed at Fort Wainwright, Alaska, under NAICS code 561910. Interested parties should note that the response deadline for this opportunity is November 27, 2026.
Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

in 12 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE4A5-27-T-3096
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 325520
New
DIBBS
SEALING COMPOUND
Solicitation # SPE8ES-27-T-0328
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access
Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS