This Government Contract opportunity from California was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Secure Installation of MicroSD Cards

Closed

State & Local

Submission Closed07/21/2026, 01:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325520

New

DIBBS

Supplier of Specialized Adhesive (NSN 8040-01-663-3917)

Defense Logistics Agency

POSTED

DEADLINE

Supplier of Adhesive-Coated Plastic Sheets (NSN 9330016077801)

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2756

This solicitation, issued by the Defense Logistics Agency under the Department of Defense, is for the procurement of adhesive identified by NSN 8040-01-337-4339. The requirement is for a quantity of four bottles, with each bottle containing 8 ounces. The contract is designated as fully competitive and follows specific military and federal specifications, with a required delivery timeframe of 20 days after receipt of order. The agreement mandates strict adherence to DLA packaging and quality requirements, including specific protocols for bare item marking and the removal of government identification from non-accepted supplies. Because the material is classified as hazardous, the supplier must comply with the Hazard Communication Standard by submitting Safety Data Sheets and compliant labels for review and approval prior to the award. Additionally, the supplier is required to ensure all employees are trained on the current safety data and labeling requirements.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2764

This contract is a solicitation from the Defense Logistics Agency for the procurement of 20 kits of sealing compound, identified by NSN 8030-01-672-2868. The product consists of a black Part A and a white Part B that mix to form a gray compound. It is subject to a non-extendable shelf life of nine months and must be delivered to the Helicopter Maritime Strike Squadron 60 in Jacksonville, Florida, within 20 days. The supplier must adhere to strict hazardous material guidelines, including the submission of Safety Data Sheets and compliant labeling per OSHA and 29 C.F.R. 1910.1200 standards. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with specific requirements for hazardous materials shipping. All shipments must be sent via traceable means, and the contract prohibits the use of parcel post.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2765

Solicitation SPE8ES-26-T-2765 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one pint of adhesive primer, identified by NSN 8040-01-713-9570. The requirement is for delivery to Boise, Idaho, with a required delivery date of September 14, 2026. The procurement is subject to strict hazardous material guidelines, requiring storage below 90 degrees Fahrenheit and compliance with the Hazard Communication Standard for labeling. Packaging and marking must adhere to MIL-STD-129, RP001, and IP025 standards. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification and authorization from the DLA to access export-controlled technical data subject to ITAR or EAR regulations. The contract incorporates CMMC Level 2 certification requirements and mandates the use of the Wide Area Workflow system for electronic invoicing and receiving. Evaluation preferences are provided for HUBZone Small Business Concerns, and the government will not consider offers utilizing additive manufacturing. The solicitation is governed by the Buy American Act and the Berry Amendment, with inspection and acceptance occurring at the destination.

Defense Logistics Agency

POSTED

DEADLINE

GASKET FORMING COMPOUN

Solicitation # SPE4A0-26-T-4787

Solicitation SPE4A0-26-T-4787 is a fixed-price request for quotations issued by DLA Aviation for the procurement of Gasket Forming Compound, identified by NSN 8030-01-517-1616. The requirement is for one tube containing 250 milliliters, with acceptable part numbers from Loctite Corp (2087069) or W.W. Grainger, Inc. (4KM17). This commercial off-the-shelf item is classified as Type I (Code H) with a non-extendable shelf life of 12 months and must be stored in unopened containers between 46 and 70 degrees Fahrenheit. Delivery is required within 5 days after receipt of order to the destination at Fort Knox, Kentucky, with an original required delivery date of September 10, 2026. The contract mandates strict adherence to hazardous materials standards, requiring the submission and approval of Safety Data Sheets and OSHA hazard warning labels by technical personnel prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while sampling and inspection will follow MIL-STD-1916 or ASQ H1331. The procurement incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and requires compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity and telecommunications restrictions. All quotes must be submitted via the DIBBS system by September 18, 2026, and final invoicing must be processed through the Wide Area WorkFlow system.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2766

Solicitation SPE8ES-26-T-2766 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of four units of yellow adhesive, identified by NSN 8040-01-663-3917. The item is classified as a Type 2 (Code 4) product with an extendable 12-month shelf life. Delivery is required within five days of award to Tyndall AFB, Florida, with an original required delivery date of September 14, 2026. Inspection and acceptance will occur at the destination. Due to the hazardous nature of the material, suppliers must submit Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to award to avoid being deemed ineligible. Packaging and marking must strictly adhere to MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements (RP001 and IP025). The contract incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and requires the use of the Wide Area WorkFlow (WAWF) system for invoicing. Additionally, the procurement is subject to the Buy American Act, the Berry Amendment, and DFARS cybersecurity reporting requirements for covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

Flooring Adhesive Supplier

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2742

This contract is for the procurement of one 1.75 ounce bottle of adhesive hardener, identified by NSN 8040-01-440-5474, for delivery to Vandenberg SFB, California. The item must be delivered within 20 days and requires a minimum of 85 percent remaining shelf life upon receipt, with a total non-extendable shelf life of 12 months. Storage must be maintained between 46 and 70 degrees Fahrenheit to prevent adverse effects on product properties. The supplier must comply with strict hazardous material regulations, including the submission of Safety Data Sheets and labels consistent with OSHA and 29 C.F.R. 1910.1200 standards. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements. Shipping must be conducted via traceable means, and the contract specifies a required delivery date of September 9, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2749

This solicitation, issued by the Defense Logistics Agency under solicitation number SPE8ES-26-T-2749, is for the procurement of one pint of adhesive primer, identified by NSN 8040-01-713-9570. The contract requires delivery within five days after the order is placed and is performed at Fort Knox. The procurement falls under NAICS code 325520 and is managed by the Department of Defense. The contract includes stringent security and compliance mandates, specifically requiring CMMC Level 2 certification from a third-party assessment organization. It is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, the supplier must adhere to DLA master lists for technical and quality requirements, follow specific packaging standards, and ensure proper physical identification and marking of items.

Defense Logistics Agency

POSTED

DEADLINE

CORROSION RESISTANT CO

Solicitation # SPE8ES-26-T-2744

This contract is for the procurement of a chemically treated aluminum corrosion resistant coating, specifically a premixed liquid in an applicator pen format. The product is defined as Type II, containing no hexavalent chromium, and Class 3 for low electrical resistance. It is supplied in boxes of 12 pens and is classified as a critical application item. The item has a 12-month shelf life, and deliveries must ensure that at least 85 percent of this shelf life remains upon receipt by the government. The supplier must adhere to strict quality and safety standards, including MIL-STD-129 for labeling and the Hazard Communication Standard for the submission of Safety Data Sheets and compliant labeling. Packaging must follow DLA requirements and be delivered FOB Destination to Fort Campbell, Kentucky. The contract specifies a delivery window of 10 days after order and requires compliance with Qualified Products Lists or Qualified Manufacturers Lists.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-26-T-2746

This contract is for the procurement of six units of resin epoxy, identified by NSN 8040-01-674-3901 and part number 1039604. The agreement specifies a non-extendable shelf life of 12 months and requires storage temperatures between 0 and 68 degrees Fahrenheit. Delivery is set for 20 days after order, with the destination being the USS George H W Bush CVN 77. The supplier must adhere to strict hazardous material guidelines, including the submission of Safety Data Sheets and labels compliant with OSHA and 29 C.F.R. 1910.1200. Packaging and marking must follow MIL-STD-129 and DLA packaging requirements. Technical and quality standards are governed by the DLA Master List, and the contract includes specific requirements for the removal of government identification from non-accepted supplies.

Defense Logistics Agency

POSTED

4 days ago

DEADLINE

in 2 days

AI Contract Overview

The contract requires the installation of 512GB MicroSDXC storage cards into modified gaming consoles, with the explicit instruction to permanently seal the cards using epoxy to ensure they cannot be removed, replaced, or tampered with under any circumstances. This work is intended to create a hardened, secure storage solution that eliminates any possibility of data extraction or hardware modification after installation. The task involves precise technical execution to integrate the storage media into the console hardware without compromising functionality or durability, while maintaining the integrity of the sealed unit. The contract is classified as a subcontract under NAICS code 325520, pertaining to the manufacturing of other chemical products, indicating the work likely involves proprietary or specialized modification processes. It was posted on July 9, 2026, with a response deadline of July 21, 2026, and is issued by the California Department of Corrections & Rehabilitation, suggesting the modified consoles are intended for use in a secure correctional environment. The place of performance and point of contact details are unspecified, but the procurement is conducted through California’s eProcurement system, indicating state-level oversight and compliance requirements.