Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Sensor Technology & Physical Wave Measurement Systems

Active

Federal

Response Deadline11/06/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity with the Naval Surface Warfare Center Carderock Division involves the supply and integration of physical wave measurement sensors and hardware technologies. The selected provider will be responsible for designing and modifying hardware to integrate various sensor technologies into an open-architecture system for prime contractors. The primary deliverables include fully integrated sensor hardware and physical measurement systems. Interested parties must hold Joint Certification Program certification via DD Form 2345 to be eligible. The project falls under NAICS code 334511 and is managed by the Department of Defense. The response deadline for this requirement is November 6, 2026.

General Info

Supply and integrate wave measurement sensors for NSWC Carderock by November 6, 2026.

Agency

Department Of Defense → Nswc Carderock

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

MD

Set-Aside

NONE

Documents

This scope was carved out of N00167-26-RFPREQ-CD-80-0198.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PRE-SOLICITATION NOTICE: Environmental and Ship Motion Forecasting Follow-On (ESMF FO)

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 6

Submission deadline

Response Deadline

11/06/2026, 02:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Nswc Carderock

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Nswc Carderock

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and integrates physical wave measurement sensors and hardware technologies for prime contractors on Naval Surface Warfare Center Carderock Division (NSWCCD) projects. Integrates diverse physical wave measurements and sensor technologies into an open-architecture system via hardware design and modification. Requires Joint Certification Program (JCP) certification via DD Form 2345. Delivers integrated sensor hardware and physical measurement systems.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A5-27-T-1023

Solicitation SPE4A5-27-T-1023 is a fixed-price request for the procurement of two shaft assemblies, identified by NSN 6610010736458 and Moog Inc. part number 77611032-1. This equipment is designated as a critical application item. The contract is issued by the DLA Weapons Support ASC Supplier Oper OEM Division, with a required delivery date of May 18, 2027, and a delivery timeline of 166 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict quality and technical standards, including sampling methods per MIL-STD-1916 or ASQ H1331 and packaging requirements according to ASTM D3951 and MIL-STD-129. Key compliance mandates include CMMC Level 2 self-assessment, NIST SP 800-171 standards, and the safeguarding of covered defense information. Additionally, the contract incorporates various FAR and DFARS clauses regarding the Buy American Act, Berry Amendment, and the prohibition of trafficking in persons. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 19 hours ago

DEADLINE

SEXTANT, MARINE

Solicitation # SPE4A6-27-R-0030

This solicitation, number SPE4A6-27-R-0030, is issued by DLA Aviation for the procurement of 208 Marine Sextants under NSN 6605-012533442, intended for use on Ohio Class SSN Trident ships. The contract is strictly set aside for Service-Disabled Veteran-Owned Small Businesses, with the solicitation expected to issue around October 21, 2026, and close on November 20, 2026. Delivery is required within 78 days after receipt of order, with inspection occurring at the origin and shipping terms set as FOB Destination. Award decisions will be based on a combination of price, past performance, and other evaluation factors. The successful offeror must provide detailed design and material drawings in accordance with specific contract specifications and must be DoD certified to access unclassified restricted data via DD Form 2345. Higher-level contract quality requirements apply, and the government is not utilizing commercial item acquisition policies for this requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

TOOL, CARBON MONOXIDE

Solicitation # SPE7M1-27-U-0377

Solicitation SPE7M1-27-U-0377 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of Carbon Monoxide Tools, identified by NSN 6665016449252. This procurement is a Total Small Business Set-Aside and may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual requirement is 72 units, with a guaranteed minimum quantity of 10 units and an expected average of two orders per year. Deliveries are to be made to various CONUS and OCONUS DLA Depots, with inspection and acceptance occurring at the destination. Quotes must be submitted electronically via the DLA Internet Bid Board System by October 21, 2026. Offerors are encouraged to provide quantity ranges due to demand volatility. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with specific requirements for hazardous materials labeling under the Hazard Communication Standard. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment, compliance with DFARS 252.204-7012 for safeguarding covered defense information, and adherence to the Buy American Act and Berry Amendment.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

FILTER, ULTRAVIOLET LIG

Solicitation # SPE7M1-27-U-0422

Solicitation SPE7M1-27-U-0422 is a total small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for ultraviolet light filters, identified by NSN 6665015492575. This procurement may result in a unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual quantity is 358 units, with a guaranteed minimum quantity of 53 units and a minimum delivery order quantity of 179 units. Quotes must be submitted electronically via DIBBS by October 21, 2026. The contract requires delivery within 89 days after order, with inspection and acceptance occurring at the destination. Supplies must adhere to reference drawing 51298 39111535. Packaging must comply with MIL-STD-129 and RP001, with specific standards for hazardous materials per TQ requirement IP025 and the Hazard Communication Standard. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity assessment requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

TRANSMITTER, POSITION

Solicitation # SPE4A7-27-T-1166

Solicitation SPE4A7-27-T-1166 is a fixed-price procurement issued by the DLA Weapons Support ASC for the acquisition of three position transmitters (NSN 6610006789887). The requirement is designated as a critical application item and a Performance Review Institute (PRI) QML or QPL item, meaning it must be produced by an accredited manufacturer or assembled by an accredited distributor listed on the applicable Qualified Manufacturer List or Qualified Products List. Technical and quality standards are governed by the DLA Master List, with specific requirements for the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. The contract specifies a delivery window of 166 days, with a need ship date of April 6, 2027, and a final required delivery date of April 26, 2028. Delivery is FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001. Inspection and acceptance will occur at the point of origin. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF), a CMMC Level 2 self-assessment, and strict adherence to the Buy American Act and Berry Amendment. All quotes must be submitted through the DIBBS portal.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

DIAPHRAGM AND TUBE

Solicitation # SPE4A7-27-T-0569

Solicitation SPE4A7-27-T-0569 is a federal procurement issued by the Defense Logistics Agency (DLA) for the supply of four units of a diaphragm and tube, identified by NSN 6610007153208 and Elbit America part number 40192300030. This item is designated as a critical application item. The required delivery date is March 21, 2027, with a need ship date of April 6, 2027. Delivery is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances when using MIL-STD-105/ASQ Z1.4. Key regulatory requirements include a CMMC Level 2 self-assessment, compliance with the Buy American Act and Berry Amendment, and the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing. The procurement falls under NAICS code 334511 and incorporates various DFARS and FAR clauses regarding cybersecurity, hazardous material labeling, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 19 hours ago

DEADLINE

TRAP, WATER, ANESTHESIA

Solicitation # SPE2DS-27-T-0848

Solicitation SPE2DS-27-T-0848 is a fixed-price procurement issued by the DLA Troop Support Medical Supply Chain for four packages of anesthesia monitor water traps, identified by NSN 6515-01-586-5431. These disposable plastic traps feature two hydrophobic microporous PFE membranes with a 0.2 micrometer pore size, designed to be impermeable to bacteria, germs, and condensed water for use with anesthetic agent monitor NSN 6515-01-502-2117. The items must have a shelf life of 152 months, with no more than 22 months elapsed from the date of manufacture to the date of government delivery. Delivery is required within 20 days ADO to the USS George H W Bush CVN 77 in FPO AE 09513, with FOB and inspection/acceptance points set to destination. Compliance requires adherence to the DLA Master List of Technical and Quality Requirements (RA001) and DLA packaging requirements (RP001). Packaging must follow ASTM D3951, and marking must comply with Medical Marking Standard No.1, which supersedes MIL-STD-129. Offerors must provide source and part number details and are subject to the Buy American Act and Berry Amendment restrictions. Technical acceptability depends on the submission of Safety Data Sheets for hazardous materials and the exclusion of additive manufacturing processes. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

CASE, RADIAC SET

Solicitation # SPE7M1-27-U-0914

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

TESTER, CALIBRATION, THE

Solicitation # SPE2DS-27-T-0717

Solicitation SPE2DS-27-T-0717 is a request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of one Calibration Tester 9600 Plus Thermoscan Tympanic, specifically designed for use with SureTemp thermometers. The item is identified by NSN 6515-01-558-5573 and falls under NAICS code 334511. The required delivery date is October 19, 2026, with a delivery timeframe of 20 days after the order. Shipping is designated as FOB Destination, with delivery locations specified in Japan and the United States. The contractor must adhere to strict technical and quality standards, including Item Unique Identification in accordance with MIL-STD-130 and DFARS 252.211-7003. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation also incorporates various federal regulations, including the Buy American Act, the Berry Amendment, and specific DFARS clauses regarding cybersecurity and the prohibition of certain telecommunications equipment.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

SIGHT GLASS, DETECTO

Solicitation # SPE7M1-27-T-1270

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

PROBE, SAMPLING, GAS IND

Solicitation # SPE7M1-27-U-0629

The DLA Weapons Support Maritime Supply Chain is soliciting quotes for the procurement of Gas Indicator Sampling Probes, NSN 6665016909106, with the approved source identified as Honeywell Analytics Inc. Part Number GA-PROB1-1. This procurement is issued as a Request for Quotation (RFQ) and may result in a unilateral Indefinite Delivery Contract (IDC) with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual quantity is 62 units, with a guaranteed minimum of 9 units. This opportunity is set aside for the Women-Owned Small Business (WOSB) program, and eligible vendors must be certified by the Small Business Administration or an approved third-party certifier. Deliveries are to be made to various CONUS and OCONUS DLA Depots, with a required delivery timeline of 55 days after receipt of order and a total performance period of one year from award. All items must be packaged and marked according to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 standards. Inspection and acceptance will occur at the destination. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. Quotes must be submitted electronically via DIBBS by October 21, 2026, and must comply with the Buy American Act, the Berry Amendment, and specific cybersecurity requirements under DFARS 252.204-7012.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

CASE, ELECTRONIC COMMUN

Solicitation # SPE7M1-27-U-0639

Solicitation SPE7M1-27-U-0639 is a total small business set-aside request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of electronic communications equipment cases, identified by NSN 5895015865649. This effort may result in an automated unilateral Indefinite Delivery Contract with a one-year term and a maximum aggregate value of 350,000.00 dollars. The estimated annual quantity is 121 units, with a guaranteed minimum of 18 units. Delivery is required to various CONUS and OCONUS DLA Depots, and quotes must be submitted electronically via the DIBBS portal by October 21, 2026. The contractor must adhere to strict technical and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. A critical requirement is compliance with MIL-PRF-23199E to ensure a mercury-free environment, preventing corrosion of sensitive metals used in submarine systems and reactor plants. All shipments must follow RP001 DLA packaging requirements and IRPOD standards. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for all invoicing and payment requests. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and cybersecurity standards such as DFARS 252.204-7012 and CMMC Level 2. Notably, the government will not evaluate or award contracts to offers involving items produced via additive manufacturing.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

More opportunities from Department Of Defense → Nswc Carderock

Same awarding agency

Specialized Operator Training & SustainmentThis subcontract opportunity with the Naval Surface Warfare Center Carderock Division involves providing specialized operator training and continuous sustainment services for the ESMF system. The selected provider will be responsible for developing comprehensive training curricula and delivering instruction to operators through the use of technical manuals and simulators. Key deliverables include the provision of fully trained operators and the submission of detailed sustainment reports. Prospective bidders must hold Joint Certification Program certification via DD Form 2345 to be eligible. The project falls under NAICS code 611519 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 6, 2026.

Other Technical and Trade Schools

POSTED

DEADLINE

Physical Fabrication & Shipboard InstallationThis subcontract opportunity with the Department of Defense for the Naval Surface Warfare Center Carderock Division involves the physical fabrication of system components and the installation of hardware on ships. The scope of work includes fabricating system housings and mounts, performing shipboard installations, and conducting necessary system testing to deliver fully operational hardware for prime contractors. Interested parties must hold Joint Certification Program certification via DD Form 2345 to be eligible. The project falls under NAICS code 332999, with a response deadline set for November 6, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

UI/UX & Decision-Support Interface DevelopmentThis subcontract opportunity with the Department of Defense for the Naval Surface Warfare Center Carderock Division focuses on the design and development of an operator guidance and decision-support interface. The selected contractor will be responsible for software design and modifications to create a cohesive system that allows operators to effectively interact with predictive models and sensor data. The primary deliverable is a fully functional operator decision-support interface software. Interested parties must hold Joint Certification Program certification via DD Form 2345 to be eligible. The project falls under NAICS code 541511, with a response deadline set for November 6, 2026.

Custom Computer Programming Services

POSTED

DEADLINE

Predictive Modeling & Algorithmic DevelopmentThis subcontract opportunity with the Naval Surface Warfare Center Carderock Division focuses on the development and maturation of predictive models and algorithms designed for ship motion forecasting. The selected contractor will utilize high-performance computing to create these models and algorithms, ensuring they are integrated into a cohesive operator guidance interface. The final deliverables for this project include validated predictive models and algorithmic software modules. Interested parties must hold Joint Certification Program certification via DD Form 2345 to be eligible. The project falls under NAICS code 541715 and is managed under the Department of Defense. Responses are due by November 6, 2026, at 2:00 PM.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

PRE-SOLICITATION NOTICE: Environmental and Ship Motion Forecasting Follow-On (ESMF FO)

Solicitation # N00167-26-RFPREQ-CD-80-0198

The Naval Surface Warfare Center Carderock Division is issuing a pre-solicitation notice for the Environmental and Ship Motion Forecasting Follow-On contract, anticipated under solicitation number N0016726R1009 on or after November 06, 2026. This procurement is intended as a single-award Indefinite Delivery/Indefinite Quantity contract utilizing Cost-Plus-Fixed-Fee pricing with a five-year ordering period. The primary objective is to sustain, improve, and expand the U.S. Navy's ship motion forecasting capabilities to enhance operational safety and efficiency by predicting windows for personnel and material movements. The scope of work encompasses the full systems engineering lifecycle, including hardware and software design, physical fabrication, proof-of-concept prototyping, shipboard installation, system testing, continuous sustainment, and specialized operator training. The effort focuses on developing a flexible, open-architecture system that integrates physical wave measurements, predictive models, algorithms, and sensor technologies into a cohesive decision-support interface for operators. To access controlled attachments with Distribution Statement D limitations upon the formal solicitation release, prospective offerors must maintain an active registration in SAM.gov and a verified certification with the Joint Certification Program via an approved DD Form 2345. All solicitation activities will be conducted through the Procurement Integrated Enterprise Environment solicitation module.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Weapons Effect Solicitation

Solicitation # N0016727R3103

Solicitation N0016727R3103 is a request for scientific and technical services to support the Naval Surface Warfare Center, Carderock Division, specifically within the Survivability and Weapons Effects Division. The contractor will provide experts in underwater explosions (UNDEX) and air explosions (AIREX) to develop and utilize specialized software codes. Key objectives include simulating underwater shock and air blast environments, analyzing the response of Navy platforms to various weapon attacks, supporting live fire test and evaluation programs, and solving finite element models for elastic-plastic responses. This opportunity is restricted exclusively to SEAPORT-NxG MAC holders, and all proposals must be submitted via the PIEE Solicitation Module. The award is based on a best-value trade-off where the technical factor is more important than the cost proposal. Technical evaluation focuses on the approach, management, personnel qualifications, and software process improvement initiatives, while past performance is evaluated as acceptable or unacceptable. Key personnel requirements are stringent, requiring a Final Secret security clearance and specific certifications such as IAT Level II or IASAE Level I for software developers. Senior Engineers must have 10 years of experience in explosive test operations, and Computer Scientists must have 8 years of experience with specific languages including Python, C++, C, and Fortran. The anticipated award date is July 6, 2027, with a requirement for the prime contractor to subcontract at least 20 percent of the total estimated task order value to small business concerns.

Engineering Services

POSTED

DEADLINE

in about 1 month

RFP for Advanced Signatures Technologies (AST)

Solicitation # N0016726R3104

The Department of the Navy, Naval Surface Warfare Center, Carderock Division (NSWCCD), is soliciting Advanced Signatures Technologies (AST) Support Services under the SeaPort-NxG Multiple Award Contract. This total small-business set-aside requirement focuses on the integration of emerging software technologies, including big data processing, cloud computing, and predictive data analytics, to support naval signatures tactical guidance, training, and synthetic simulation for NAVSEA, DoN, and DoD sponsors. The scope includes developing software capabilities for systems afloat and ashore, utilizing agile software development, DevSecOps, and geospatial information systems to support anti-submarine warfare operators. The contract is structured as a five-year period of performance, consisting of a one-year base period and four one-year option periods. Pricing is based on Cost-Plus-Fixed-Fee (CPFF) for labor hours and Cost No Fee for other direct costs. The government will utilize a best-value trade-off source selection process, evaluating proposals based on technical approach, past performance, and cost, with technical merit being the most important factor. Due to the nature of the work, all proposed personnel must be U.S. citizens with Secret clearances, and the contractor must adhere to strict security standards, including the National Industrial Security Program and specific Cyberspace Workforce certification requirements. Proposals must be submitted exclusively through the PIEE Solicitation Module by SeaPort-NxG MAC holders.

Engineering Services

POSTED

DEADLINE

Earthwork & Site PreparationThis subcontract for Earthwork and Site Preparation supports prime contractors on facility projects for the Department of Defense at the NSWC Carderock Division. The scope of work involves comprehensive site clearing, grading, and excavation, specifically focusing on site preparation for a storage pad and the execution of utility trenching. All operations must be performed using heavy machinery, such as graders and excavators, and must strictly adhere to UFGS Division 31 standards to ensure the site is properly graded and ready for concrete pouring. The project is categorized under NAICS code 238910 and is located in zip code 20817. Interested parties should note that the solicitation was posted on October 19, 2026, with a response deadline set for November 18, 2026.

Site Preparation Contractors

POSTED

DEADLINE

HVAC & VentilationThis subcontract opportunity with the Department of Defense for the NSWC Carderock Division involves the installation of heating, ventilation, and air conditioning systems. The scope of work includes the installation of HVAC units, ductwork, and ventilation fans designed to maintain temperature control and manage the venting of hazardous gases to ensure a climate-controlled storage environment. Qualified contractors must possess HVAC certification and strictly adhere to UFGS Division 23 standards. The project is categorized under NAICS code 238220, with a response deadline set for November 18, 2026. Performance will take place in the 20817 zip code area.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical & Electronic SecurityThis subcontract for the NSWC Carderock Division involves the installation of electrical wiring and electronic security systems for prime contractors. The scope of work includes the installation of power systems, electrical panels, and comprehensive safety and security infrastructure, such as cameras and sensors, to deliver a fully energized and secure facility. Qualified providers must hold a Master Electrician license and ensure all work adheres to UFGS Division 26 and 28 standards. The project falls under NAICS code 238210 and is managed under the Department of Defense. Responses are due by November 18, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Fire Suppression SystemsThis subcontract opportunity with the Department of Defense at the NSWC Carderock Division involves the installation of specialized fire suppression systems designed specifically for lithium-ion battery hazards. The selected contractor will be responsible for implementing systems that utilize extinguishing agents suitable for lithium-ion fires to ensure a fully operational safety solution. All work must be performed in strict adherence to UFGS Division 21 standards. Qualified bidders must possess a valid fire protection license to be eligible for this project. The solicitation was posted on October 19, 2026, with a response deadline of November 18, 2026. The project falls under NAICS code 238220 and will be performed at the facility located in zip code 20817.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Perimeter Security Fencing & GatesThis subcontract opportunity with the Department of Defense for the NSWC Carderock Division involves the installation of security fencing and access control gates. The selected contractor will be responsible for delivering a fully enclosed secure perimeter using security grade fencing and industrial gates, ensuring all work adheres to UFGS Division 32 standards. The project is categorized under NAICS code 238990 and will be performed in the 20817 zip code area. Interested parties must submit their responses by the deadline of November 18, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS