Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

SEPARATOR 1st/2nd

Awarded

SPMYM226P7988Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, solicitation number SPMYM226P7988, is a total small business set-aside issued by the Department of Defense through DLA Maritime - Puget Sound. The procurement is for four seawater-cooled high-pressure air compressors, specifically model WP5000, to be provided by Sauer Compressors USA, Inc. This acquisition is being conducted as a sole source procurement under FAR 13.106-1 (b) because the compressors are direct replacement parts for existing equipment. The performance of this contract is centered in Bremerton, Washington, with a required delivery date of June 3, 2026. The procurement falls under NAICS code 333912 and is managed by the office located in Bremerton, Washington. Naomi Larson serves as the primary point of contact for this action.

General Info

DoD sole source contract for four Sauer WP5000 air compressors delivered by June 2026.

Agency

Department Of Defense → DLA Maritime - Puget Sound

Contract Value

$233,368.08

NAICS

333912 - Air and Gas Compressor Manufacturing

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Awardee

SAUER COMPRESSORS USA, INC.

Award Issued Date

08/27/2026, 12:00:00 AM UTC

Documents

1

61115376 - Justification for Sole Source (Sauer Compressors USA)

justification-and-authorization

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedAug 27

Award Notice

AwardedAug 27

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Maritime - Puget Sound

Contacts1 person available

OfficeBREMERTON, WA, 98314-5000, USA

Organization / AgencyDepartment Of Defense → DLA Maritime - Puget Sound

Office AddressBREMERTON, WA, 98314-5000, USA

Contacts

NAOMI LARSON

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=540c5e46548c400b92b0d3ce043a2836

Similar Contracts

Same NAICS industry code

Inverter and Industrial Air Compressor IntegrationThis subcontract opportunity with the Department of Defense for W6QM Micc-Ft Drum involves the supply and installation of integrated power and pneumatic systems for vehicle projects. The scope of work requires the hardwiring of a 4,000W to 5,000W pure sine wave power inverter and the installation of a high-pressure industrial air system featuring a 150-175 PSI compressor, a 10-30 gallon receiver tank, a regulator, and a water separator. All installations must strictly adhere to established electrical safety standards for vehicle systems. The project is designated as a total Small Business Set Aside under NAICS code 333912. Interested parties must note the response deadline of October 28, 2026, with performance taking place in the 07806 zip code area. This contract focuses on delivering fully functional, integrated hardware solutions to support prime contractors on specialized military vehicle modifications.

W6QM Micc-Ft Drum

POSTED

about 6 hours ago

DEADLINE

43--FILTER ELEMENT,INTAKE

Solicitation # SPE7M127Q0098

DLA Weapons Support

POSTED

about 6 hours ago

DEADLINE

SCBA Compressor and Air Purification Equipment SupplierThis subcontract agreement involves the supply of a complete high-pressure breathing air compression and filtration system for fire department projects managed by the Wilcox County Board of Commissioners in Georgia. The scope of work requires the delivery of a four-stage, air-cooled, oil-lubricated compressor from brands such as Arctic, Bauer, or Mako, featuring a capacity of 6,000 PSI and 10 CFM. The equipment must include a Grade E purification system equipped with a carbon monoxide monitor and replaceable cartridges. Interested parties must respond by November 19, 2026, to provide these essential systems to the prime contractors overseeing the project.

Wilcox County Board of Commissioners

POSTED

DEADLINE

Wilcox County Board of Commissioners (SCBA Compressor and fill station RFP)

Solicitation # PE-77234-NONST-2027-000000012

The Wilcox County Board of Commissioners is soliciting proposals for the procurement, delivery, and installation of a complete Self Contained Breathing Apparatus (SCBA) Compressor and Fill Station for the Wilcox County Fire Department. The scope of work requires a four-stage, air-cooled, oil-lubricated compressor from manufacturers such as Arctic, Bauer, or Mako, featuring a minimum operating pressure of 6,000 PSI and a capacity of 10 CFM. The system must include a Grade E breathing air purification system with carbon monoxide monitoring, four ASME/DOT storage cylinders with a priority fill panel, and an enclosed containment fill station meeting current NFPA requirements, including a safety interlock. The selected vendor will be responsible for the full installation, system and leak testing, operational demonstrations, air quality certification, and on-site training for personnel. Proposals must be submitted in a sealed envelope labeled specifically as a sealed bid and delivered to the Commissioner's Office in Abbeville, Georgia, by 2:30 PM on November 19, 2026. Bidders must provide a GSICA Contractor affidavit, drug-free workplace certification, and equal opportunity employer certification, with minority and DBE contractors encouraged to apply. All pricing must be inclusive of shipping and remain valid for four months following the bid opening. Evaluation will be based on technical compliance and product quality, though alternate brands of equal or better quality may be proposed. The award may be issued to a single contractor or split among multiple vendors at the discretion of the Board of Commissioners.

Wilcox County Board of Commissioners

POSTED

DEADLINE

Portable Special-Purpose High-Purity Nitrogen Generation Systems

Solicitation # N4523A27RFI0801

The Puget Sound Naval Shipyard and Intermediate Maintenance Facility is conducting market research via Request for Information N4523A27RFI0801 to acquire portable, special-purpose high-purity nitrogen generation systems. The government is seeking a ruggedized, turn-key solution housed within a single ISO 668 Type 1C 20-foot heavy-duty intermodal shipping container that is weather-sealed and salt-air corrosion resistant. Technical requirements specify the system must produce nitrogen with oxygen purity levels below 50 ppm, deliver pressures up to 4,500 psig, and feature a dual-mode feed air architecture, a high-pack booster compressor, and an automated supply manifold. The system must be capable of 180 days of continuous operation without scheduled servicing and 7-day autonomous operation in an unmanned outdoor shipyard environment. The contemplated acquisition strategy is an Indefinite Delivery/Indefinite Quantity (IDIQ) contract utilizing streamlined commercial procedures under FAR Part 12 and FAR Part 15. The government intends to procure two initial First Article Test units for qualification and NRTL inspection, followed by up to ten production units ordered via firm-fixed-price delivery orders. The scope includes on-site turnkey delivery, commissioning, operational verification at the Bremerton, Washington facility, 24 months of spare consumable parts, and optional multi-year maintenance agreements. Source selection is expected to be based on Best Value with Tradeoffs or Lowest Price Technically Acceptable, evaluating technical capability, reliability, delivery schedules, and past performance.

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

43--FILTER ASSEMBLY,FLUID

Solicitation # SPE7LX27U0311

DLA Weapons Support

POSTED

DEADLINE

43--SEAL ASSEMBLY,SHAFT,SP

Solicitation # SPE7M127Q0084

DLA Weapons Support

POSTED

DEADLINE

Supply of Compressor Pistons (NSN 4310-12-332-1519)This subcontract involves the manufacture or procurement of two specialized compressor pistons, identified by NSN 4310-12-332-1519, to support prime contractors fulfilling DLA supply contracts. The project is managed under the Department of Defense through the DLA Weapons Support Maritime Supply Chain, falling under NAICS code 333912. Strict adherence to technical and regulatory standards is required, including RP001 DLA packaging requirements and C03 supply chain traceability documentation. Additionally, the provider must comply with DFARS 252.225-7059 and 252.225-7966 trade restrictions to ensure all legal and security mandates are met.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hydraulic Pump Supplier (NSN/Supply Code 4320-01-717-5856)This subcontract involves the manufacture or procurement of hydraulic pump model 4320-01-717-5856 to support prime contractors for the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys. The selected supplier is responsible for ensuring all units meet strict technical specifications through rigorous quality control and adhering to RP001 and MIL-STD-129 standards for packaging and labeling. To be eligible, the provider must maintain ITAR/EAR compliance and hold certification under the US/Canada Joint Certification Program. The primary deliverable is the physical pump, fully packaged and labeled according to the specified military standards. This opportunity falls under NAICS code 333912, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CYLINDER HEAD, COMPR

Solicitation # SPE7M4-27-T-0511

Solicitation SPE7M4-27-T-0511, issued by the DLA Weapons Support Fluid Handling Division, seeks quotes for five compressor cylinder heads, identified as NSN 4310010596086 and Curtiss-Wright Electro-Mechanical part number 220462F1. This is designated as a critical application item and must be produced in accordance with TDP Rev A Gen 1. The required delivery date is March 13, 2028, with a need ship date of October 20, 2026. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Technical and quality requirements are governed by RA001, and environmental safety standards include NAVSEA 5100-003D regarding the prohibition of intentionally added mercury. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

in about 23 hours

Solicitation # SPE7M1-27-T-0417

Solicitation SPE7M1-27-T-0417 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 10 breather units under NSN 4310-01-735-6148. The contract requires delivery within 156 days after order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. All supplies must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is categorized under NAICS 333912, and quotes must be submitted via the DLA Internet Bid Board System. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List, which takes precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, and the use of Class I ozone-depleting chemicals is strictly prohibited. Additionally, additive manufacturing is not authorized for these supplies unless specifically approved. Administrative requirements include the use of Wide Area Workflow for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, hazardous material labeling, and the Buy American Act.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 23 hours

PISTON, COMPRESSOR

Solicitation # SPE7M1-27-T-0273

Solicitation SPE7M1-27-T-0273, issued by the DLA Weapons Support Maritime Supply Chain, is a fixed-price procurement for four compressor pistons, identified by NSN 4310-01-017-0605. This is a restricted source item requiring engineering source approval by the government design control activity and is designated as a critical application item. The required delivery date is October 31, 2027, with a need ship date of December 1, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements found in the DLA Master List and prohibits the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment requests. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and various FAR sections governing changes, subcontracts, and the prohibition of certain internal confidentiality agreements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 23 hours

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

Inconel Welding Stud Manufacturing and SupplyThis small business set-aside subcontract through DLA Maritime - Puget Sound involves the manufacture and supply of Inconel welding studs for prime contractors. The studs must be produced according to ASTM-B446, UNS N06625 Grade 1 specifications in an HF annealed and pickled condition, with threads conforming to MIL-S-24149 Type V. Performance for this contract will take place in Bremerton, Washington. The supplier is required to strictly adhere to the Counterfeit Detection and Avoidance Program guidelines and provide comprehensive supply chain traceability documentation. Final deliverables include the physical welding studs accompanied by a complete traceability package to ensure material integrity and compliance with Department of Defense standards.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supplier of Brunson Part Number 5150This subcontract, issued by DLA Maritime - Puget Sound for the Department of Defense, requires the procurement and delivery of two units of Brunson Part Number 5150. The hardware is intended for prime contractors working on Department of the Navy projects located at the Puget Sound Naval Shipyard in Bremerton, Washington. The selected supplier must provide full supply chain traceability documentation, including NSN and CAGE codes, and ensure strict adherence to the Buy American Act and the Counterfeit Detection and Avoidance Program. This opportunity is designated as a total set-aside for small businesses under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

UNIVERSAL BRACKET

Solicitation # SPMYM227Q0128

Solicitation SPMYM227Q0128 is a total small business set-aside for the procurement of two universal brackets, specifically manufacturer Brunson part number 5150, for the DLA Maritime Puget Sound office. The requirement is for FOB Destination delivery to the Puget Sound Naval Shipyard in Bremerton, Washington, with a requested delivery date of March 15, 2027. Quotes must be submitted via email to Deborah Beierle by 12:00 PM on October 22, 2026. To be considered responsive, bidders must provide a signed and completed solicitation including contractor information, CAGE code, manufacturer details, and lead times. Award will be granted to the technically acceptable offeror that is most advantageous to the government, based on price and past performance as evaluated through PPIRS-SR. Technical acceptability requires meeting all specifications, and contractors must certify that materials are new and unused. Invoicing must be processed electronically through Wide Area Work Flow (WAWF). Compliance requirements include adherence to NIST SP 800-171 for non-COTS items, MIL-STD-129 and MIL-STD-130 for marking, and ASTM-D-3951 for commercial packing. All communications are governed by the Procurement Integrity Act.

Saw Blade and Handtool Manufacturing

POSTED

DEADLINE

Solicitation # SPMYM227Q0126

DLA Maritime Puget Sound is soliciting bids for a firm fixed-price supply contract for Inconel welding studs, specifically requesting 200 units of 3/8 inch studs with a 3 inch nominal length and additional 6 inch studs. The items must be manufactured from ASTM-B446, UNS N06625 Grade 1 material in an HF annealed and pickled condition, with threads conforming to MIL-S-24149 Type V. This procurement is a 100 percent small business set-aside under NAICS code 332722 and PSC 5307, utilizing commercial and simplified acquisition procedures per FAR Parts 12 and 13.5. The contract requires FOB Destination delivery to the Puget Sound Naval Shipyard in Bremerton, Washington, with a requested delivery date of October 23, 2026. Award will be granted to the responsible offeror deemed most advantageous based on technical merit and price. Submission requirements include a completed pricing list for each CLIN, a cage code, manufacturer information, and current SAM.gov registration. Contractors must adhere to ASTM-D-3951 for packaging and marking, use the DLA Vendor Shipment Module for shipping labels, and submit invoices electronically via Wide Area Workflow. If applicable, contractors must provide a current NIST SP 800-171 assessment unless the items are identified as Commercial Off The Shelf.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Supply of Industrial Grating UnitsThis subcontract, issued by DLA Maritime - Puget Sound for the Department of Defense, involves the manufacture and procurement of 300 industrial grating units. The selected provider must ensure all units meet specific technical specifications and National Stock Numbers, while delivering comprehensive supply chain traceability packages that include batch identification and CAGE codes. Performance will take place in Bremerton, Washington, under NAICS code 332323. The contract mandates strict adherence to Buy American regulations and the Counterfeit Detection and Avoidance Program standards to ensure material integrity. This opportunity is designated as a total Small Business Set Aside. The solicitation was posted on October 19, 2026, with a response deadline of October 21, 2026.

Ornamental and Architectural Metal Work Manufacturing

POSTED

DEADLINE

Supplier of Flexible Ducting (Flexaust)This subcontract, issued by DLA Maritime - Puget Sound for the Department of Defense, requires the supply of 50 units of Flexaust flexible ducting. The specific requirement is for part number CWC-W HI-TECH DURAVENT 2PN MODEL 111012000677, which must adhere to UL-94-V-0 standards. Performance for this contract will take place in Bremerton, Washington. The selected supplier must provide a comprehensive delivery package including the 50 duct units and full supply chain traceability documentation. Required deliverables include CAGE codes and inspection reports in accordance with CDAP guidelines. This opportunity is designated as a total set-aside for small businesses under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Solicitation # SPMYM227Q0115

Solicitation SPMYM227Q0115 is a request for proposal issued by DLA Maritime - Puget Sound for the procurement of 50 units of flexible ducting. The required items must meet UL-94-V-0 standards and are identified by Flexaust part number CWC-W or Hi-Tech Duravent part number 2PN, model number 111012000677. This acquisition is a total set-aside for small businesses under NAICS code 332999. Delivery is requested by November 23, 2026, with shipping terms set as FOB Destination to the Puget Sound Naval Shipyard in Bremerton, Washington. Award will be granted to the technically acceptable offeror that is most advantageous to the government, based on a combination of unit price and past performance as evaluated via the Supplier Performance Risk System. To be considered responsive, bidders must submit a signed and completed solicitation via email to Hollie Cruz by October 23, 2026, at 10 AM. Key requirements include the use of the DLA Vendor Shipment Module for MIL-STD-129 compliant shipping labels and electronic invoicing through Wide Area Work Flow. Additionally, contractors must comply with NIST SP 800-171 unless the items are identified as Commercial Off The Shelf, and must adhere to the Procurement Integrity Act during all communications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPMYM227Q0112

Solicitation SPMYM227Q0112 is a total small business set-aside for the procurement of pre-galvanized 5-diamond plank safety grating with 12 gauge welded standard carrier plates. The requirement consists of two line items: 100 units for item 0001 and 200 units for item 0002, both with a requested delivery date of November 30, 2026. The grating must meet specific dimensions of 2 inches in depth, 11-3/4 inches in width, and 48 inches in length, referencing part number R-52012. The estimated total award amount is 26,000 dollars, and the contract is a firm fixed price arrangement with shipping terms as FOB Contractor Destination. The award will be granted to the responsible offeror whose proposal is most advantageous to the government, considering both price and technical factors. Bids must be submitted by October 21, 2026, via email to Donna Todd at DLA Maritime - Puget Sound. To be deemed responsive, submissions must include a signed and completed solicitation, unit price line item pricing, and specific manufacturer details. Contractors must adhere to ASTM-D-3951 for packaging and marking, ensure all items are palletized, and use the DLA Vendor Shipment Module for shipping labels. Invoicing must be processed electronically through Wide Area Workflow. Additionally, awardees may be required to implement NIST SP 800-171 unless the items are identified as Commercial Off The Shelf.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Manufacture and Supply of Fire-Resistant Flexible DuctsThis subcontract, managed by DLA Maritime - Puget Sound for the Department of Defense, involves the manufacture and supply of specialized fire-resistant flexible ducts for prime contractors on US Navy procurement projects. The scope of work requires the production of 2-ply neoprene-coated polyester fabric hoses reinforced with spring steel wire helixes, available in diameters of 4, 5, 6, and 18 inches. Additionally, the contractor is responsible for applying fire-resistant markings via paint stenciling or ink printing in strict accordance with NSN specifications LLS053479, LLS054353, LLS040270, and LLS053476. The project is designated as a Total Small Business Set Aside under NAICS code 339113, with the place of performance located in Bremerton. Interested parties must adhere to the response deadline of October 23, 2026. The final deliverable consists of finished, marked flexible ducts that meet all specified military and technical requirements.

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

FLEXIBLE DUCT IDIQ

Solicitation # SPMYM227Q0101

DLA Maritime Puget Sound is soliciting a firm fixed price, indefinite delivery indefinite quantity contract for the procurement of flexible ducts to support the Puget Sound Naval Shipyard in Bremerton, Washington. This requirement is set aside 100% for small businesses, including women-owned and economically disadvantaged women-owned small businesses. The contract scope involves various flexible ducts, such as 2-ply neoprene-coated polyester fabric hoses with spring steel wire helixes, with a minimum guarantee of 5,000 dollars and a maximum ceiling of 5,000,000 dollars. Delivery is required as FOB Destination to the Puget Sound Naval Shipyard IMF, with a general delivery schedule of 365 calendar days from the date of award and performance periods extending through 2031. To be deemed responsive, offerors must provide comprehensive documentation, including CAGE codes, manufacturer specification sheets, and proof of UL94 V-0 flame retardant certification. Strict marking requirements apply, requiring ducts to be stenciled with specific fire resistant warnings in black or white characters at eight locations. Packaging must be palletized, and unique item identification must comply with ISO/IEC 16022 and MIL-STD-129/130 standards. Award will be based on the most advantageous offer, considering technical requirements, unit pricing, and past performance. Invoicing must be processed electronically via Wide Area Workflow.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS