Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Shielding Gasket Manufacturing and Supply

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture and supply of two units of an electronic shielding gasket identified by NSN 5999-01-724-0774 and part number AG736000-37, with all work required to meet the technical and quality standards established by the Defense Logistics Agency. The product must be produced in full compliance with Department of Defense specifications to ensure performance and reliability in critical applications. The opportunity is structured as a subcontract under the NAICS code 334419, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026, with the contract managed by the Active Devices Division under the Department of Defense. All bidders must adhere to the submission requirements and deadlines outlined in the official solicitation accessible via the provided DIBBS link.

General Info

Manufacture and supply two shielding gaskets to DOD specs in New Cumberland, PA, by July 30, 2026.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of two units of electronic shielding gasket (NSN 5999-01-724-0774, part number AG736000-37) compliant with DLA technical and quality standards.

Similar Contracts

Same NAICS industry code

Wiring Harness Manufacturing and AssemblyThe contract involves the manufacture and assembly of 2,060 military-specification electrical wiring harnesses identified by NSN 6150-01-248-2549, requiring full traceability throughout production and compliance with strict packaging standards. All units must be delivered to locations within the continental United States as directed by order, ensuring timely and precise fulfillment of military logistics needs. The work is classified as a subcontract under NAICS code 334419, with the Defense Logistics Agency acting on behalf of the Department of Defense to oversee procurement. The solicitation was posted on July 20, 2026, and performance will be coordinated through the established DLA contracting framework using the referenced award number SPE4A626D5714.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Microcircuit Manufacturing and Supply (NSN 5962-01-281-4172)The contract entails the manufacture and delivery of seven qualified linear microcircuits identified by NSN 5962-01-281-4172 and designated as RD004, all of which must adhere to stringent military specifications ensuring performance, reliability, and environmental resilience. Each unit requires full traceability throughout the production lifecycle, from raw materials to final assembly, to guarantee authenticity and compliance with defense standards. In addition to hardware specifications, the supplier must implement and maintain CMMC Level 2 cybersecurity controls to safeguard controlled unclassified information during manufacturing, handling, and communication, ensuring alignment with Department of Defense cybersecurity requirements. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 334419 for other semiconductor and related device manufacturing. The contract is not subject to a specific set-aside designation and does not specify a place of performance or point of contact. The solicitation was posted on July 20, 2026, and the award reference is identified as SPE7M126P8879. Compliance with all technical, quality, and cybersecurity provisions is mandatory, and failure to meet these obligations could result in rejection of delivery or contract termination. The supplier is expected to demonstrate proven capability in defense electronics manufacturing and secure supply chain practices.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Rotary Switch Supply (Commercial Off-the-Shelf Item)The contract involves the supply of 11 units of a commercial off-the-shelf rotary switch identified by NSN 5930011333696, a component that meets military specifications despite being commercially available. The item is classified under NAICS code 334419, indicating its alignment with electronic component manufacturing, and is being procured as a subcontract under the Department of Defense via the Defense Logistics Agency. Although the solicitation number is not provided and no specific place of performance or point of contact is listed, the contract was posted on July 20, 2026, signaling its placement in the future procurement timeline. The absence of set-aside classification suggests the contract is open to any qualified commercial supplier without restrictions based on business size or status. The electronic component will support defense systems requiring reliable, specification-compliant rotary switches sourced from the commercial market.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

LIGHT, INDICATORThe contract pertains to the procurement of six LIGHT, INDICATOR units with NSN 6210-01-316-4583 and part number 70902-41838-101, supplied by DUCOMMUN LABARGE TECHNOLOGIES, INC. The units are priced at $6.00 each, totaling $36.00, with delivery required within 20 days under FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must strictly adhere to MIL-STD-2073-1E standards with specific preservation, wrapping, and unit containment requirements. Marking of the shipment must comply with MIL-STD-129, with no special marking codes applied, and palletization must meet DLA packaging guidelines. The delivery destination is the 2nd Supply Depot in Busan, South Korea, with the freight forwarder and transportation details governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and the acquisition falls under the Defense Logistics Agency, with the solicitation number SPE8E7-26-T-3264. Covered Defense Information may apply, and documentation for source approval must be submitted in accordance with RC001. The required delivery date is June 17, 2026, and the contract is subject to DLA’s unit of issue standards and oversight for government use, with designated administrative codes for distribution and advancement.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

SWITCH, PUSHThe item is a PUSH SWITCH with NSN 5930-01-316-7681, quantity of 23 units, under purchase request 7017436985, with a delivery schedule of 157 days ADO. This item is classified as non-CAI and non-CSI and is subject to strict export control regulations under either ITAR or EAR, meaning any transfer of associated technical data to foreign persons—even within the United States—requires prior authorization from the Department of State or Department of Commerce. The technical data is governed by DFARS 252.225-7048, and access is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and are formally approved by DLA to access such information. The solicitation number is SPE7M2-26-T-5696, posted on July 20, 2026, with responses due by July 31, 2026, under NAICS code 334419. The contracting office is the Department of Defense’s Nuclear Reactor Program, with performance taking place in San Diego, California, and primary point of contact being Alisha Blanton.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

SWITCH ASSEMBLYThe contract pertains to the procurement of a SWITCH ASSEMBLY with NSN 5930-01-605-5090 and part number 159400G1, under solicitation SPE7M2-26-T-5695, issued by the Department of Defense’s Nuclear Reactor Program. Ten units are required, to be delivered FOB origin within 144 days of contract award, with no tolerance for quantity variance. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-28786 for preservation, all in alignment with the latest revisions. Packaging must be palletized per RP001 and labeled with the specified pack code U, with all markings and procedures meeting federal standards. Strict prohibitions apply to the intentional addition of mercury or mercury-containing compounds in or contacting the switch assembly, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents explicitly authorized by NAVSEA. Any portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions tied to the solicitation issue date. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and the delivery must be completed no later than December 23, 2026, despite an original required delivery date of September 1, 2027. The unit of issue is each, priced at $10.00 per unit, with total contract value of $100.00.

NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

SWITCH, PUSHThe contract pertains to the procurement of 14 units of a PUSH SWITCH with NSN 5930-01-226-8184 under solicitation SPE7M8-26-T-5454, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 157 days after award, with a response deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. The acquisition falls under NAICS code 334419 and is subject to DLA Packaging Requirements for Procurement, which reference technical and quality standards from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary compliant with NAVSEA 5100-003D. The offeror must submit a complete data package for both the primary and alternate parts, as no existing data is available for this item. Performance is designated for New Cumberland, PA, with Dondiego Boler listed as the primary point of contact for inquiries.

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

LEAD, ELECTRICALThis contract is for a single unit of Lead, Electrical, identified by Part Number 868001113 and NSN 6150-12-359-5761, issued under solicitation SPE4A0-26-T-3971 by the Department of Defense through DLA. The item is classified as a critical application and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the specified URL. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking required. The supply must be delivered FOB origin within five days of the contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Sampling follows MIL-STD-1916 or equivalent zero-based inspection methods, with acceptance criteria of zero non-conformances unless otherwise specified. The item must be shipped via traceable freight, not parcel post, to the receiving point at Fort Carson, Colorado. Documentation for source approval is required, and any government identification must be removed from non-accepted supplies. The contract mandates compliance with DLA packaging and identification standards, including palletization and intermediate container requirements. The required delivery date is July 13, 2026, and the point of contact is Danita Davis from DLA.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

WIRING HARNESSThe contract pertains to the procurement of a wiring harness identified by NSN 6150-01-618-3328 and part number 3911818, with a quantity of 13 units to be delivered FOB origin within 275 days from the contract date, targeting a required delivery date of April 22, 2027. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required, and must be palletized according to DLA guidelines. The material has no shelf life restriction and is subject to sampling procedures in accordance with MIL-STD-1916 or ASQ H1331 Table 1, where critical, major, and minor attributes must be verified at levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively; unspecifed attributes are considered major. Acceptance criteria require zero non-conformances in the sample lot unless otherwise stated in the contract. Inspection and acceptance occur at the destination, and the unit price is $13.00 per EA for a total price of $169.00. The delivery address is DLA Distribution Red River, Building 499, Texarkana TX 75507-5000, and all transportation details adhere to DLAD Proc Notes C19 and C20. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the relevant revision controlled by the solicitation issue date for simplified acquisitions. The contract is issued under SPE7L5-26-T-4338 and classified under NAICS code 334419, with procurement information and contact details provided by Bradley Evans at the Department of Defense.

LAND SUPPLIER OPNS ENGINES

POSTED

about 18 hours ago

DEADLINE

SWITCH, SENSITIVEThe contract pertains to the procurement of a SWITCH, SENSITIVE with NSN 5930011968357, quantity of 529 units, under solicitation SPE7M8-26-T-5240, with a delivery schedule of 168 days ADO and FOB ORIGIN terms. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for non-hazardous goods and TQ Requirement IP025 for hazardous materials as defined by FED-STD-313. All packaging and labeling must adhere to MIL-STD-129, including barcoding, with palletization following RP001 guidelines. Sampling methods require zero non-conformance acceptance per MIL-STD-1916 or ASQ Z1.4, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are classified as major. The contract includes mandatory FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards, electronic invoicing via WAWF, export control, prohibitions on hexavalent chromium and covered Chinese military company items, and safeguarding covered defense information. Contractor compliance with the DFARS 252.204-7012 clause on cyber incident reporting and NIST SP 800-171 assessment requirements is enforced. The solicitation requires submission via DIBBS by the July 20, 2026 deadline and mandates a Valid Unique Entity ID and CAGE code. Payment processing is governed by WAWF with no alternative invoicing methods permitted. The contract does not specify pricing for this solicitation but references historical prices for context, and no option quantities or extended pricing are provided. Evaluation factors and award basis are not explicitly defined, though compliance with technical and quality requirements appears decisive. The clause 252.223-7001 requires hazardous material labeling per OSHA’s Hazard Communication Standard unless precluded by other federal statutes, with pre-award submission of labels and MSDS required. No key personnel

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

SWITCH, TOGGLEThe contract pertains to the procurement of a SWITCH, TOGGLE with NSN 5930-01-170-2136 and part number LE452-0005-2007, sourced from approved suppliers including Honeywell International Inc., BAE Systems Controls Inc., Safran Power USA LLC, and The Boeing Company. Five units are required at a unit price of $5.00, totaling $25.00, with delivery mandated FOB origin within 155 days of the contract award. All packaging must conform to DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must comply with MIL-STD-129 for marking and labeling. If the item is classified as hazardous per FED-STD-313, packaging must adhere to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable. Palletization is required under RP001: DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination, with no tolerance for quantity variance. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the original required delivery date of November 3, 2026, and a needed ship date of December 23, 2026. Transportation instructions are governed by DLAD Proc Note C19 for freight and C20 for first destination. The solicitation number is SPE7M8-26-T-5353, issued under NAICS 334419 by the Department of Defense’s Electrical Devices Division, with responses due by July 20, 2026, and the primary point of contact is Dondiego Boler.

ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

BAR, LIFTINGThe contract pertains to the procurement of one unit of a BAR, LIFTING item with NSN 4933-00-495-6861 and part number 116C3827, issued under solicitation SPE4A0-26-T-3965 by the Department of Defense through DLA. Delivery is required within five days of award, FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001 DLA Packaging Requirements. The supply is destined for USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 under vessel shipment protocols, with transportation governed by DLAD Proc Notes C19 and C20. The contract incorporates technical and quality standards identified by R or I numbers from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical attributes are verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and bare item marking must comply with RQ017. The supplier must remove all government identification from non-accepted supplies per RQ011, and the item must be delivered by July 10, 2026.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

WAWF Invoicing and Payment Processing ServicesThe contract requires the submission of electronic invoices and receiving reports through the Wide Area WorkFlow system in strict adherence to DFARS 252.232-7006, utilizing either the Invoice 2in1 format or the standard electronic formats prescribed by the Department of Defense. All submissions must be accurately structured and timely delivered to ensure compliance and proper payment processing. The work is scoped under a subcontract and is assigned the NAICS code 541512, indicating a focus on computer systems design and related services. Performance is tied to the location of New Cumberland with ZIP code 17070-5002, and the contracting activity falls under the Active Devices Division of the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and participation is conducted via the DIBBS portal using the provided solicitation number.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Military Packaging, Marking, and Shipping Compliance ServicesThe contract requires comprehensive packaging, preservation, and marking services fully aligned with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring military-grade compliance for all handled items. Specifically, dry preservation method 10 must be applied to protect equipment from environmental degradation, while unit packaging under Pack Code U ensures items are individually prepared for efficient handling and distribution. All packages must be marked using DoDAAC-based routing protocols to guarantee accurate tracking and delivery through defense logistics networks. The work is tied to a subcontract under the ACTIVE DEVICES DIVISION of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, ZIP 17070-5002. The North American Industry Classification System code 493190 indicates the service falls under Other Support Activities for Transportation, emphasizing logistics and handling specialization rather than manufacturing. Proposals must be submitted by August 4, 2026, with the solicitation open since July 20, 2026, and no set-aside provisions specified for small business or other categories.

Other Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Military-Grade Electrical Connector Body, ReceptacleThe contract requires the manufacture of 18 units of a military-spec electrical connector body, receptacle, identified by Part No. A-A-55463-06 and NSN 5935-01-323-6812, fully compliant with A-A-55463A Revision A, Generation 4, and DLA RA001 specifications. The work must be performed to exacting military standards ensuring reliability and performance under operational conditions, with the finished products destined for use in defense applications. The NAICS code 334417 indicates this falls under the category of Electronic Component and Product Manufacturing, emphasizing precision fabrication and adherence to technical and quality control requirements. The solicitation is classified as a subcontract and was posted on July 20, 2026, with responses due by August 4, 2026. Performance is to occur at the facility located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contract is managed by the Active Devices Division under the Department of Defense, which oversees procurement for critical military electronics components. The precise location of performance and the strict compliance requirements indicate that the contractor must have the necessary certifications and capabilities to meet defense-grade production and inspection standards. The contract will be administered through the DLA DIBBS system using the referenced solicitation number SPE7M526Q0741.

Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

Inspection and Quality Assurance Services (MIL-STD-1916 Compliance)The contract requires the execution of final inspection services for capacitors under strict quality standards, specifically employing MIL-STD-1916 or ASQ H1331 sampling plans to ensure zero non-conformances and full compliance with accepted quality levels for critical, major, and minor defects. The work must be performed to exacting military and industry benchmarks, emphasizing the absolute absence of defects in every inspected unit, making precision and rigorous quality control paramount. The inspection process is non-negotiable in its requirements, leaving no room for tolerance in adherence to the specified standards. The contract is a subcontract under the Department of Defense’s Active Devices Division, with performance expected at a designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. Issued under NAICS code 541330 for Engineering Services, the opportunity is open for response until July 31, 2026, with posting dated July 20, 2026. All submissions must meet the demanding compliance criteria without deviation, and bidders must be fully prepared to deliver flawless inspection outcomes aligned with defense-quality expectations.

Engineering Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract requires the preparation and submission of hazard warning labels and Material Safety Data Sheets (MSDS) that fully comply with OSHA 29 CFR 1910.1200 and DFARS 252.223-7001 regulations. This subcontract is focused on ensuring accurate, up-to-date, and legally compliant documentation for hazardous materials used or handled by the Department of Defense. All deliverables must align with federal safety standards to support proper hazard communication, worker protection, and supply chain accountability within defense operations. The work is to be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under the NAICS code 541620, which corresponds to scientific and technical consulting services. The contracting activity is under the Active Devices Division of the Department of Defense, indicating this effort supports specialized defense systems requiring strict adherence to hazardous materials management protocols. Subcontractors must be prepared to meet detailed regulatory requirements without deviation and ensure their documentation is traceable, standardized, and immediately accessible for audit or inspection purposes.

Environmental Consulting Services

POSTED

about 18 hours ago

DEADLINE

Specialized Packaging and Preservation Services for Military ElectronicsThe contract requires specialized packaging and preservation services for military electronic components, adhering strictly to MIL-STD-2073-1E standards for environmental protection and long-term storage. Services include thorough cleaning, drying, vacuum sealing, and precise labeling with MIL-STD-129-compliant barcoding, specifically for QUP:001 components. All work must ensure components remain protected against moisture, corrosion, and physical damage during transit and extended storage. The contract is structured as a subcontract under the Department of Defense’s Active Devices Division, with performance required at the location in New Cumberland, Pennsylvania, ZIP 17070-5002. It falls under NAICS code 339999 for other miscellaneous manufacturing and has a response deadline of July 31, 2026. The solicitation is open for qualified vendors to submit proposals through the DIBBS platform, with no set-aside designation specified, indicating it is open to all eligible contractors.

All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Fixed Micro Capacitors (MIL-DTL-39028 Compliant)The contract requires the manufacture of 72 fixed micro capacitors fully compliant with MIL-DTL-39028 specifications, encompassing all stages from sourcing raw materials and assembly to rigorous testing, proper packaging, and accurate marking for traceability and compliance. The work must be completed in accordance with military standards, ensuring performance, reliability, and environmental resilience under operational conditions expected in defense applications. All deliverables must meet stringent quality control benchmarks and documentation requirements to validate conformance throughout the production lifecycle. The contract is issued as a subcontract under the NAICS code 334416 for electronic component manufacturing, with performance scheduled to occur at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, indicating a narrow twelve-day window for proposal submission. The contracting activity falls under the Department of Defense through its Active Devices Division, signifying this is part of a critical defense supply chain requiring adherence to federal procurement protocols and readiness for inspection and audit. Delivery timelines and compliance verification are central to fulfilling contractual obligations successfully.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 18 hours ago

DEADLINE

ESD/EMI-Sensitive Packaging & PreservationThe contract requires the supply of ESD and EMI protective packaging for electronic components, with strict adherence to MIL-STD-2073-1E and MIL-PRF-81705 standards to ensure proper preservation and protection against electrostatic discharge and electromagnetic interference. The packaging must meet all technical and performance requirements outlined in these military specifications to safeguard sensitive electronics during storage, transportation, and handling. This subcontract is targeted for performance at the Columbus location with ZIP code 43213 and is classified under NAICS code 322291, indicating packaging and container manufacturing activities. The solicitation was posted on July 20, 2026, with a response deadline set for July 31, 2026, leaving a limited window for interested parties to submit proposals. The contracting activity falls under the Active Devices Division of the Department of Defense, and the opportunity is open for bidding through the DIBBS platform. No specific set-aside classification is indicated, and while no point of contact details are provided, all submissions must be directed through the official UI link to ensure proper processing and compliance with procurement protocols.

Sanitary Paper Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

Traceability & Documentation ManagementThe contract requires the preparation and submission of detailed traceability documentation and reports in strict alignment with DLA-specified naming conventions, with all deliverables submitted through the WAWF system. This subcontract is part of a broader effort to ensure end-to-end supply chain accountability and regulatory compliance, specifically for items associated with the Department of Defense’s Active Devices Division. The performance location is designated as Columbus, Ohio, with a zip code of 43213, indicating the physical or operational focus of the work. The solicitation opened on July 20, 2026, and responses are due by July 31, 2026, with the NAICS code 541611 classifying the work under Management Consulting Services, suggesting the need for process-driven administrative and documentation oversight rather than direct manufacturing. All activities must adhere precisely to DLA protocols to ensure timely acceptance and avoid contractual noncompliance.

Administrative Management and General Management Consulting Services

POSTED

about 18 hours ago

DEADLINE

Cybersecurity & CUI Safeguarding ServicesThe contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect Controlled Unclassified Information within contractor information systems. This effort is critical for ensuring the confidentiality, integrity, and availability of CUI handled by the subcontractor, with full compliance expected throughout the performance period. The work is tied to a subcontract under the Department of Defense’s Active Devices Division, and performance must occur at the designated location in Columbus, Ohio, with a zip code of 43213. The solicitation, identified under NAICS code 541512 for Computer Systems Design Services, was posted on July 20, 2026, with a firm response deadline of July 31, 2026. The contract type is specifically designated as a subcontract, indicating integration into a larger prime contract structure. Compliance with NIST SP 800-171 is not optional; it forms the core technical requirement, mandating the fulfillment of all 110 security controls across areas such as access control, audit, configuration management, and incident response. Contractors must demonstrate proven capability to deploy, monitor, and sustain these controls within their information systems to meet federal security standards.

Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation and ongoing maintenance of Safety Data Sheets and hazardous material labels that meet strict regulatory standards under OSHA 29 CFR 1910.1200 and Federal Standard No. 313, ensuring full compliance with federal hazardous communication requirements. All deliverables must be accurate, up to date, and properly formatted to support safe handling, storage, and disposal of hazardous materials within the Department of Defense supply chain. The work is classified as a subcontract under NAICS code 541690 and is tied to performance at a designated location in Columbus, Ohio, with a zip code of 43213. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, with the contracting activity managed by the Active Devices Division of the Department of Defense.

Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

Microcircuit Supply – Digital ComponentsThe contract involves the supply of three defense-grade digital microcircuits identified by NSN 5962012334079, ensuring full compliance with military-grade ESD and EMI-safe packaging requirements as well as stringent preservation standards for long-term operational integrity. These components are critical to mission-critical defense systems and must meet exacting military specifications for reliability under extreme environmental and electromagnetic conditions. The work is to be performed at a designated location in Columbus, Ohio, with delivery and compliance deadlines aligned to the contract’s timeline. This subcontract was posted on July 20, 2026, with a response deadline of July 31, 2026, under the NAICS code 334418 for semiconductor and related device manufacturing. The contracting entity is the Active Devices Division within the Department of Defense, and the procurement is managed through the DLA BSM platform. All submissions must adhere to military supply chain protocols, including traceability, packaging integrity, and documentation standards, without the use of set-asides or specific small business designations. The requirement is time-sensitive and demands precise fulfillment to support ongoing Defense Department operations.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE