Situational Awareness, Boundary Enforcement and Response (SABER) Computing Hardware for Surface Ships

**4/6/2026 UPDATE: Updated posting, response timeframe, and POCs.

**3/24/26 UPDATE: The Government is working an update to this posting and will be extending the repsonse timeframe. Once the update is published, the Government may consider extending the response timeframe further. 

PURPOSE:

The Department of the Navy is hereby issuing a combined Request for Information (RFI) and sources sought notice on behalf of NAVSEA 03 and Naval Information Warfare Systems Command (NAVWAR) Program Executive Office (PEO) Command, Control, Communications, Computers and Intelligence (C4I) and Cybersecurity Program Office  (PMW 130). NAVSEA is requesting information from industry and is conducting market research to identify potential sources that possess the capability to accomplish potential future requirements for a potential hardware production contract for the Situational Awareness, Boundary Enforcement and Response (SABER) Mid-Tier Acquisition (MTA). 

The Government invites all interested potential sources, including small business concerns, to submit written information sufficient to demonstrate the respondent’s ability to fulfill the requirements and/or responses to the request for information.

DESCRIPTION:

The Navy intends to procure computing platforms from industry to host the software operating environment and other cybersecurity computer program applications, this equipment is the SABER Computing Hardware suite. The SABER Computing Hardware is required to be produced for four different types of SABER equipment suite units:

• Situational Awareness, Boundary Enforcement & Response (SABER) racks
• Boundary Defense Capability (BDC)/Distributed Packet Collector (DPC) Variant "A" units with built-in displays
• Boundary Defense Capability (BDC)/Distributed Packet Collector (DPC) Variant "B" units without built-in displays,
• Out of Band Network Switch (OOBNS) Units

The Government is seeking sources capable of providing up to 60 SABER equipment suite units over a five (5) year period.  This RFI covers the production of units after 2027.  The SABER system includes a single Grade B shock hardened electronic equipment rack and ancillary hardware that is installed in shipboard spaces to provide Defensive Cyber Operations capabilities for fleet assets.  This includes integration of commercial-off-the-shelf (COTS) electronics into a rack that meets shipboard requirements for mission essential equipment, engineering support and potential re-design or system hardware upgrades.  

INFORMATION SOUGHT:

Interested parties are free to submit any information which may assist the Navy in its market research. Companies without SABER experience are welcome to submit responses regarding analogous programs.

There is no page requirement/limit and a detailed proposal is not requested.  Submission in PDF format is required  Drawings sized to 8.5”x11” or 11”x17.”  All other documentation sized to 8.5”x11.”

Capability Statements

Interested parties should summarize their capabilities and to support the following activities and processes:

 i. Managing all design and production aspects of SABER equipment hardware production, in accordance with Attachment 1, draft SABER Technical Data Package (TDP). Companies without SABER experience are welcome to submit responses regarding analogous programs.

ii. Providing systems engineering to design, develop, test, qualify, produce, deliver and support display, videos, printers and related hardware.

 iii. Conducting formal design and test reviews in accordance with the PEO SHIPS/NAVSEA 03C Technical Requirements Manual (TRM).

iv. Implementing and maintaining a Configuration Management (CM) program.

v. Managing obsolescence to include a Diminishing Manufacturing Sources and Material Shortages (DMSMS) plan and metrics. Implementing and maintaining a Reliability, Maintainability and Quality Assurance (RMQA) program.

vi. Development, implementation, and maintenance of a Risk Management Plan to identify, evaluate, and mitigate program risks including technical, environmental, safety, cost, and schedule components

vii. Providing engineering support developing, producing and qualifying SABER components to meet Government provided unit specifications.

The Government may require engineering support in updating the TDP over the course of the contract. To that end, the response should address experience with defining, developing and updating the following:

i. Concept Design Document

ii. Developmental Design Drawings and Associated List

iii. Product and Line Replaceable Unit Drawings and Associated Lists

iv. Hardware Engineering Design Documents and Parts List

v. System, Power, and Environmental Requirements

vi. Interface Specifications and Requirements

vii. Interface Control Drawings

viii. Cable Block Diagrams

ix. Special Inspection Equipment Drawings and Associated Lists

x. Special Tooling Drawings and Associated Lists

xi. ILS Documentation

m. Timeline

Request for Information

Interested parties are encouraged to submit any information which may assist the Navy in its market research. Please provide the following information and technical data.

1. Cover page containing the following information:
   • Company name
   • Contractor and Government Entity (CAGE) code
   • Unique Entity Identifier (UEI) number
   • Mailing address and physical address (if different)
   • Business size status (based on applicable NAICS code )
   • Type of small business (if applicable)
   • Point(s) of contact name, title, phone number, fax number and email address.

2. Capability statement describing the contractor’s ability to perform the requirements specified in this notice. This should include information regarding the contractor’s previous experience with similar efforts within the previous five years, including building shipboard racks and equipment from a government provided TDP. To the extent practicable, provide contract numbers, contract values, and periods of performance for each contract referenced in the response to this notice.

3. Provide any other supporting documentation deemed necessary to explain your firm’s capabilities, requirements, or other comments on the contemplated procurement.

4. Provide data and/or information describing the ability to deliver against the proposed Government provided TDP and drawings.

5. Feedback on the Attachment 1, SABER TDP and associated alterations is desired. If there are alterations in the specification that will be very difficult and/or expensive to complete, please provide comments/explanation. 

6. Feedback on ability to deliver systems that comply to the relevant Navy standards or suggestions on alternative standards. Relevant standards include:

• MIL-S-901D Shock Tests H.I. (High Impact) Shipboard Machinery Equipment and Systems
• MIL-E-16400H Electronic, Interior Communications and Navigation Equipment – Naval Ship and Shore
• MIL-STD-810E Environmental Engineering Considerations and Laboratory Test Methods for Aerospace and Ground Equipment
• MIL-STD-167-1Mechanical Vibrations of Shipboard Equipment
• MIL-STD-108  Definitions of and Basic Requirements for Enclosures for Electronic Equipment
• MIL-I-45208    Quality Control Inspection, System Requirements
• AS9003           General Specifications for Inspection & Test Quality Systems

ACCESS TO CONTROLLED MATERIALS:

Certain SABER technical data will be marked Distribution Statement D. This level of access requires prospective offerors to hold a current certification through the Defense Logistics Agency Logistics Information Service's Joint Certification Program (JCP).

Before the Government will consider providing a party with Attachment 1, the SABER TDP, a party shall email the POCs and therein provide the company’s name and company’s CAGE Code. Upon Navy receipt of the party’s information, the Navy will perform a vetting of the company for operational security purposes and determine, at is own discretion, if it will or will not release Attachment 1 to the party. The Government will use the information provided to validate each prospective offeror's JCP certification. Upon successful validation, prospective offerors will be required to execute a terms of use agreement governing the authorized use and disposition of any controlled materials provided by the Government in connection with this notice. A fully executed terms of use agreement is required before the Government will grant access to any controlled materials.

If the Navy chooses to release Attachment 1, in accordance with the above process, the Navy will coordinate via email with the party and provide the party with Attachment 1 via electronic drop on Department of Defense (DoD) Secure Access File Exchange (SAFE).

Note: As a reminder, interested parties do not have to meet all requirements listed in this combined RFI and sources sought notice to submit a response.  All responses received will be reviewed by the Government.

NAVSEA may host an industry engagement event to present the Navy’s requirements and to solicit feedback from prospective offerors in prearranged breakout sessions. Should an industry day be held, a separate notice will be posted to provide further details regarding the industry engagement event once they are available.

Questions concerning this announcement and submissions should be emailed to Mr. Phil Turner at philip.h.turner3.civ@us.navy.mil, Ms. Bria Pender, at bria.c.pender.civ@us.navy.mil, Mr. Michael Peduto at michael.p.peduto2.civ@us.navy.mil. The response file shall be in PDF format, with file name including the Request for Information Number N00024-26-R-4141 and company name. NO QUESTIONS VIA TELEPHONE WILL BE ACCEPTED.

DISCLOSURE:

This is a Request for Information (RFI) and sources sought notice only.  This is not a request for proposal (RFP) and a formal solicitation is not available at this time. This notice does not constitute a commitment by the Government to issue an RFP, contract, or order.

This RFI is for informational planning purposes and it is not to be construed as a commitment by the Government for any actual procurement of materials, machinery, or services. This RFI does not commit the Government to contract for any supply or service. The Government will not pay for any effort expended or any material provided in response to this announcement. All costs associated with responding to this RFI are solely at the responding parties' expense.

This RFI is open to all U.S.-only interested parties. 

Respondents are solely responsible for properly marking and clearly identifying any proprietary information or trade secrets contained within their response. The Government will not be liable for, or suffer any consequential damages for any proprietary information not properly marked and clearly identified. Proprietary information received in response to this RFI will be safeguarded and handled in accordance with applicable Government regulations.

Responses to this notice are not offers and will not be accepted by the Government to form a binding contract or agreement. The Government will not be obligated to pursue any particular acquisition alternative because of this RFI. Responses to the RFI will not be returned. Not responding to this RFI does not preclude participation in any future solicitation, if one is issued. Specific responses to the approaches will not disqualify or have an impact on participation and evaluation on future solicitations.