Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Transportation was posted on December 15, 2015. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Small Business and 8(a) Program Participation Support

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 8 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

This procurement opportunity is issued by the Department of Transportation through Franchise Acquisition Svcs for Small Business and 8(a) Program Participation Support. The initiative is specifically designed to allow 8(a) certified firms, Service-Disabled Veteran-Owned Small Businesses, and other small businesses to position themselves as either prime contractors or subcontractors for anticipated work under NAICS code 811310. Interested parties were required to submit their responses by January 13, 2016. The primary objective of this solicitation is to identify qualified small business partners to support program participation and leverage potential set-aside opportunities within the agency.

General Info

DOT seeks 8(a) and small business partners for program participation support services.

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

OK

Set-Aside

NONE

Documents

This scope was carved out of 23140.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MARKET SURVEY/REQUEST FOR INFORMATION: Airman Certificate Testing Services

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Transportation → 6973GH Franchise Acquisition Svcs
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Opportunity for 8(a), SDVOSB, and small businesses to position as primes or subcontractors in anticipated procurement with potential set-asides.

More opportunities from Department Of Transportation → 6973GH Franchise Acquisition Svcs

Same awarding agency

NAICS: 611512
New
Federal
Sources Sought for Douglas DC-3 Initial and Recurrent Pilot Training
Solicitation # 6973GH-27-R-DC3
The Federal Aviation Administration is conducting a market survey under solicitation 6973GH-27-R-DC3 to identify capable sources for commercial off the shelf initial and recurrent pilot qualification training for Douglas DC-3 aircraft. This training is intended for Flight Standards Service and Aircraft Certification Pilots and must be conducted using an FAA approved training program. The scope includes ground school and flight training via aircraft or full flight simulators to enable students to obtain unrestricted type ratings or pass pilot in command proficiency checks to Airline Transport Pilot standards. All training must comply with 14 CFR Parts 61, 121, 135, 141, and 142, as well as FAA Order 4040.9 and relevant Airman Certification Standards. Interested vendors must provide a capability statement including their SAM UEI number, years in business, past performance, the geographic area where training is provided, and their proposed strategy for the work. The primary NAICS code for this effort is 611512 for Flight Training. The contractor is responsible for providing all necessary aircraft, simulators, and materials, including the Pilot Operating Handbook, and must cover all operational costs such as fuel and landing fees. Performance will take place at the contractor facility, and payment is contingent upon the delivery of a Certificate of Completion to the Contracting Officer Representative. Responses to this survey are due by 5:00 p.m. CT on November 13, 2026.
Flight Training

POSTED

about 6 hours ago

DEADLINE

in about 1 year
View Details
NAICS: 541511
New
Federal
FOMS SOFTWARE DEVELOPMENT
Solicitation # 6973GH-27-R-FOMSSOFTWAREDEVELOPMENT
The Federal Aviation Administration (FAA) is seeking a single vendor to provide comprehensive agile software engineering, application modernization, maintenance, and system information security support for the Flight Operations Management System (FOMS). The scope of work covers two primary components: a native iOS mobile application for iPad devices to support flight crew productivity and a Java enterprise web application suite for managing flight scheduling, planning, dispatch, and various tracking and billing functions. The anticipated contract structure includes a one-year base period with up to four one-year option periods, with performance occurring onsite at the Mike Monroney Aeronautical Center in Oklahoma City, Oklahoma. Technical requirements emphasize expertise in native iOS development, Java enterprise web applications, and API integration with external operational systems. Vendors must demonstrate the ability to support federal cybersecurity Authority to Operate (ATO) processes in accordance with NIST 800-53 Rev 5 and agency-specific security baselines. Additionally, personnel must meet DOT Order 1600.1F security requirements and be clearable for FAA Personal Identity Verification (PIV) badging. This sources-sought notice falls under NAICS 541511 and requires interested parties to submit an expression of interest by November 6, 2026, detailing their business size, socio-economic status, and relevant past performance from the last five years.
Custom Computer Programming Services

POSTED

about 6 hours ago

DEADLINE

in 8 days
View Details
NAICS: 611519
New
Federal
INVESTIGATIVE INTERVIEWING TRAINING COURSE
Solicitation # 6973GH-26-R-00229
The Federal Aviation Administration is soliciting a requirements contract for an Investigative Interviewing training course designed for Airworthiness Inspectors and Engineers. The program focuses on the P.E.A.C.E. Model (Plan and Preparation, Engage and Explain, Account, Clarification and Challenge, Closure and Evaluation) to provide employees with ethical, non-coercive, and outcome-based interviewing tools. This training supports critical functions including Aviation Safety Hotline, Whistleblower, and Suspected Unapproved Parts investigations, as well as various quality system audits and enforcement investigations. The contract structure consists of a base year running from November 1, 2026, to October 31, 2027, with four subsequent option years extending through October 31, 2031. The government estimates a requirement of five classes per year, with each class limited to a maximum of 20 students and lasting approximately 40 hours. Training must be delivered via instructor-led sessions at a U.S.-based brick-and-mortar facility. The selected contractor is responsible for providing all course materials, including syllabi and reference books, and issuing PDF certificates of completion to attendees. Award will be made to a single offeror based on the Lowest Priced Technically Acceptable (LPTA) process, evaluating the training syllabus, facilities, and proposed schedule. Proposals must be submitted electronically and include separate volumes for technical factors and pricing. The contractor must adhere to strict security protocols regarding the protection of non-public and controlled unclassified information, and the training content must comply with the Consolidated Appropriations Act, ensuring it remains professional and free from religious or offensive material.
Other Technical and Trade Schools

POSTED

3 days ago

DEADLINE

in 8 days
View Details
NAICS: 237110
Federal
Mike Monroney Aeronautical Center (MMAC) Industrial Waste Water Treatment Plant Upgrades
Solicitation # 6973GH-27-R-00005
The Federal Aviation Administration is soliciting proposals for the Industrial Wastewater Treatment Plant (IWTP) and Collection System Upgrade at the Mike Monroney Aeronautical Center in Oklahoma City, Oklahoma. This total small business set-aside project, identified by solicitation number 6973GH-27-R-00005, has an estimated price range between $10,000,000 and $20,000,000. The primary scope of work involves the construction of a new IWTP building and processing equipment, with optional bids for the demolition of existing facilities and lift stations. The project must be completed within 730 calendar days from the notice to proceed, with performance beginning within 10 calendar days of that notice. Award will be determined using the Lowest Price, Technically Acceptable (LPTA) method. To be considered, offerors must attend a mandatory pre-proposal conference and site visit held on November 2, 2026. Technical acceptability is based on five factors: experience with multi-discipline construction projects over $5 million, satisfactory past performance ratings, qualified key personnel including a superintendent with seven years of experience, specific manufacturer and installer qualifications for wastewater equipment, and subcontractor experience in wastewater projects. Proposals are due by November 19, 2026, and must be submitted in two separate volumes covering contract documentation/pricing and technical factors. The contract is subject to the Davis-Bacon Act for prevailing wages and incorporates several Buy American Act clauses regarding construction materials and steel. Required security measures include the potential for employees to sign Non-Disclosure Agreements. Contractors must provide 100 percent performance and payment bonds and utilize the Delphi eInvoicing web-portal for all payment requests. Technical execution must adhere to strict industry standards, including ACI for concrete, AISC for structural steel, and ADA requirements for accessibility, while maintaining a comprehensive Environmental, Occupational Safety and Health Management System.
Water and Sewer Line and Related Structures Construction

POSTED

8 days ago

DEADLINE

in 21 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS