Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 5, 2022. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sole Source BPA to Red Six Solutions, LLC for UAS Pilot and Support; Base + One (1) Option Year

Closed
N61331-22-T-RH24Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 611512
New
Federal
Sources Sought for Douglas DC-3 Initial and Recurrent Pilot Training
Solicitation # 6973GH-27-R-DC3
The Federal Aviation Administration is conducting a market survey under solicitation 6973GH-27-R-DC3 to identify capable sources for commercial off the shelf initial and recurrent pilot qualification training for Douglas DC-3 aircraft. This training is intended for Flight Standards Service and Aircraft Certification Pilots and must be conducted using an FAA approved training program. The scope includes ground school and flight training via aircraft or full flight simulators to enable students to obtain unrestricted type ratings or pass pilot in command proficiency checks to Airline Transport Pilot standards. All training must comply with 14 CFR Parts 61, 121, 135, 141, and 142, as well as FAA Order 4040.9 and relevant Airman Certification Standards. Interested vendors must provide a capability statement including their SAM UEI number, years in business, past performance, the geographic area where training is provided, and their proposed strategy for the work. The primary NAICS code for this effort is 611512 for Flight Training. The contractor is responsible for providing all necessary aircraft, simulators, and materials, including the Pilot Operating Handbook, and must cover all operational costs such as fuel and landing fees. Performance will take place at the contractor facility, and payment is contingent upon the delivery of a Certificate of Completion to the Contracting Officer Representative. Responses to this survey are due by 5:00 p.m. CT on November 13, 2026.
6973GH Franchise Acquisition Svcs

POSTED

about 20 hours ago

DEADLINE

in about 1 year
NAICS: 611512
New
Federal
Spin and Spin Recovery Training
Solicitation # 6973GH-26-R-00243
The Federal Aviation Administration, through the Mike Monroney Aeronautical Center in Oklahoma City, is soliciting proposals for Spin and Spin Recovery Training (Course 21800090) for Aircraft Certification Flight Test Pilots and Flight Test Engineers. This is an Indefinite Delivery/Requirements contract featuring a one-year base period from December 27, 2026, to December 26, 2027, with four subsequent one-year option periods, for a total maximum duration of 66 months. Training must be conducted within the United States and consists of classes of four pilots, each receiving a minimum of four hours of ground school and two hours of aircraft flight training, with flight simulators provided if applicable. Award will be made to the Lowest-Priced Technically Acceptable (LPTA) offeror. To be deemed technically acceptable, offerors must provide a detailed training syllabus that complies with the Performance Work Statement and clearly identify specific turbine or piston-powered aircraft, as alternate aircraft will not be evaluated. Offerors must also provide proof of aircraft ownership or lease agreements. Technical and cost proposals are due electronically to Gilbert Park by 5:00 p.m. CST on November 27, 2026. Invoicing is managed through the Delphi eInvoicing web-portal and requires a Certificate of Training for each student to justify payment.
6973GH Franchise Acquisition Svcs

POSTED

about 20 hours ago

DEADLINE

in 29 days
NAICS: 611512
New
SLED
Pilot Certification and Training Services
Solicitation # IFB-060-3152603-CF
The County of Orange, through the Sheriff-Coroner agency, is soliciting competitive electronic bids for Pilot Certification and Training Services under solicitation number IFB-060-3152603-CF. The selected contractor must be an FAA-certified Part 61 and/or Part 141 flight school with at least ten years of business experience. The scope of work includes providing all classroom, airtime, ground, and simulator instruction, as well as all necessary course materials and examiner fees. Instructors must be CFIs and CFIIs with three to five years of experience. The contract is intended to run for three calendar years from the date of execution, with services performed at 4011 W. Commonwealth Ave. in Fullerton, California. Award will be granted to the lowest responsive and responsible bidder based on price, capability, past performance, and acceptance of the County's terms. Bidders must provide a valid UEI number, D-U-N-S number, and a SAM.gov confirmation dated within seven days of the bid deadline. Required documentation includes a certification regarding debarment, a W-9 form, and an active certificate from the California Secretary of State. The contract mandates compliance with various federal and state regulations, including the Clean Air Act for agreements exceeding 150,000 dollars, the Davis-Bacon Act, and the Americans with Disabilities Act. Payment will be made in arrears on a net thirty-day basis following written acceptance of services by the County.
Sheriff-Coroner

POSTED

1 day ago

DEADLINE

in about 1 month

General Info

NAICS

611512 - Flight Training

Place of Performance

Panama City Beach, FL, 32407, USA

Set-Aside

NONE

Documents

4

C12.+Clauses+-+Services.docx

DOCX

C12.+Redacted+SOW.pdf

PDF

C12.+Updated+Synopsis.pdf

PDF

C14.+Redacted+SSJ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Naval Surface Warfare Center
Contacts2 people available
OfficePANAMA CITY BEACH, FL, 32407-7001, USA
Office AddressPANAMA CITY BEACH, FL, 32407-7001, USA

Full Description

Show more
The Naval Surface Warfare Center Panama City Division, FL (NSWC PCD) intends to award a sole source BPA using simplified acquisition procedures to Red Six Solutions for UAS Piloting and Support. This procurement is sole source for the following reason: The sponsor for this effort, the Transportation Security Administration (TSA) is working in coordination with the Department of Homeland Security (DHS) to utilize Red Six Solutions for site and vulnerability assessments which will be utilized to develop an application for a Certificate of Authorization (COA) from the Federal Aviation Administration (FAA). The COA provides authorization for specific pilots to fly specific UAS in specific flight patterns. As Red Six Solutions develops the COA application and receives the authorization, they will have inherent awareness that other vendors will not have. Destination to the Naval Support Activity Panama City (NSA PC), Receiving Office Building 100, 100 Vernon Ave., Panama City, FL 32407. Small Business Size standard $30.0M, NAICS Code 611512. PSC is U009. Subj: SOLE SOURCE JUSTIFICATION MEMORANDUM FOR UAS PILOT AND SUPPORT BPA 1. Identification of the agency and the contracting activity, and specific identification of the document as a - Sole Source Justification. This is a sole source justification. Contracting activity is NSWC-PCD, Code 024, 110 Vernon Ave., Panama City, FL, 32407. 2. Nature and/or description of the action being approved. This action will award a firm fixed price Blanket Purchase Agreement to Red Six Solutions, LLC, 3 Vineberry Ct. Severna Park, MD 21146-1918 for the items described in Section 3. 3. A description of the supplies or services required to meet the agency's needs (including the estimated value). The Contractor shall provide one (1) Functional Expert, one (1) Senior Unmanned Aerial Systems (UAS) Pilot, and one (1) UAS Pilot to support upcoming UAS detection tests. The Contractor shall support test planning and test events in Miami, FL and/or Los Angeles, CA and shall provide the associated flight logs resulting from testing. This procurement will be for one (1) Base Year with one (1) Option Year if the Government requires additional testing. This acquisition will be conducted using simplified acquisition procedures with a total estimated value greater than $25,000 but not exceeding the simplified acquisition threshold of $250,000.00. The Government's minimum needs have been verified by the certifying technical and requirements personnel. This memo does not authorize acquisition for other requirements. This purchase will be funded with Department of Homeland Security Other Government funding. 4. Identification of the justification rationale and, if applicable, a demonstration of the proposed contractor's unique qualifications to provide the required supply or service. 10 U.S.C. 2304(c) - Only one responsible source and no other supplies or services will satisfy agency requirements, FAR 6.302-1. The sponsor for this effort, the Transportation Security Administration (TSA) is working in coordination with the Department of Homeland Security (DHS) to utilize Red Six Solutions for site and vulnerability assessments which will be utilized to develop an application for a Certificate of Authorization (COA) from the Federal Aviation Administration (FAA). The COA provides authorization for specific pilots to fly specific UAS in specific flight patterns. As Red Six Solutions develops the COA application and receives the authorization, they will have inherent awareness that other vendors will not have. Another vendor would need to perform a site and vulnerability assessments in order to obtain the relevant knowledge to provide the service requested, and their pilots and UAS would need to be listed in the COA application package. This makes the utilization of Red Six Solutions advantageous, saving the Government both time and money. As such, the government does not expect significant savings through competition and it is more advantageous to the Government to award on a sole source basis to the Red Six, LLC for the services listed in Section 3. 5. A determination by the ordering activity contracting officer that the order represents the best value consistent with FAR 13.106-1(b). The Contracting Officer has determined that the order represents the best value and results in the lowest overall cost alternative (considering price, special features, administrative costs, etc.) to meet the Government's needs. 6. A description of the market research conducted among schedule holders and the results or a statement of the reason market research was not conducted. For the reasons specified in paragraph 4 above, Red Six, LLC is the only source that can meet the Government's needs. This requirement will be be synopsized in the government point of entry sam.gov because it is estimated greater than $25,000.00. 7. Any other facts supporting the justification. None. 8. A statement of the actions, if any, the agency may take to remove or overcome any barriers that led to the restricted consideration before any subsequent acquisition for the supplies or services is made. As stated in paragraph 4 above, Red Six, LLC is the only source that can meet this requirement. SIGNATURE PAGE FOLLOWS Section F - Deliveries or performance F.O.B. 52.247-29 FOB Destination 52.247-34 FOB Origin Section G 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports (Dec 2018) 252.232-7006 Wide Area Workflow Payment Instructions Section I - Contract Clauses 52.203-12 Limitation on Payments to Influence Certain Federal Transactions (June 2020) 52.204-25 Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment (Nov 2021) 52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014) 52.209-6 Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment (Nov 2021) 52.212-4 Contract Terms and Conditions -- Commercial Items (Nov 2021) 52.212-5 Contract Terms and Conditions Required to Implement Statutes or Executive Orders -- Commercial Items (May 2022) Preselected: 52.203-19 Prohibition on Requiring Certain Internal Confidentiality Agreements or Statement (Jan 2017) 52.209-10 Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015) 52.233-3 Protest After Award (Aug 1996) 52.233-4 Applicable Law for Breach of Contract Claim (Oct 2004) Required: 52.222-50 Combatting Trafficking in Persons (Nov 2021) 52.223-18 Encouraging Contractor Policies to Ban Text Messaging While Driving (June 2020) 52.232-33 Payment by Electronic Funds Transfer--System for Award Management (Oct 2018) 52.232-39 Unenforceability of Unauthorized Obligations (Jun 2013) 52.232-40 Providing Accelerated Payments to Small Business Subcontractors (Nov 2021) 52.243-1 Changes Fixed-Price 52.246-4 Inspection of Services 252.203-7000 Requirements Relating to Compensation of Former DoD Officials (SEP 2011) 252.203-7002 Requirement to Inform Employees of Whistleblower Rights (Sep 2013) 252.204-7003 Control of Government Work Product (Apr 1992) 252.204-7009 Limitations on the Use or Disclosure of Third-Party Contractor Reported Cyber Incident Information (Oct 2016) 252.204-7012 Safeguarding Covered Defense Information and Cyber Incident Reporting (Dec 2019) 252.204-7015 Notice of Authorized Disclosure of Information by Litigation Support (May 2016) 252.204-7019 Notice of NIST SP 800-171 DoD Assessment Requirements (Mar 2022) 252.204-7020 NIST SP 800-171 DoD Assessment Requirements (Mar 2022) 252.225-7048 Export Controlled Items (Jun 2013) 252.232-7010 Levies on Contract Payments (Dec 2006) 252.232-7017 Accelerating Payments To Small Business Subcontractors'Prohibition On Fees And Consideration (Apr 2020) 252.247-7023 Transportation of Supplies by Sea (Feb 2019) 252.246-7007 Contractor Counterfeit Electronic Part Detection and Avoidance System (Aug 2016) 252.246-7008 Sources of Electronic Parts (May 2018) 252.215-7013 Supplies and Services Provided by Nontraditional Defense Contractors. (Jan 2018) 52.252-1 Solicitation Provisions Incorporated by Reference (Feb 1998) 52.252-2 Clauses Incorporated by Reference (Feb 1998) Section K - Representations 52.203-18 Prohibition on Contracting with Entities that Require Certain Internal Confidentiality Agreements or Statements--Representation (Jan 2017) 52.204-19 Incorporation by Reference of Representations and Certifications (Dec 2014) 52.204-24 Representation Regarding Certain Telecommunications and Video Surveillance Services or Equipment.(Oct 2020) 52.204-26 Covered Telecommunications Equipment or Services-Representation (Oct 2020) 52.209-11 Representation by Corporations Regarding Delinquent Tax Liability or a Felony Conviction (Feb 2016) 52.212-3 Alt 1 Offeror Representations and Certifications-Commercial Items (Mar 2020) 252.204-7008 Compliance with Safeguarding Covered Defense Information Controls (Oct 2016) Section L - Instructions Conditions and Notices to Bidders 52.212-1 Instructions to Offerors'Commercial Items (Nov 2021) 52.204-7 System for Award Management (Oct 2018) 52.204-13 System for Award Management Maintenance (Oct 2018) 52.204-22 Alternative Line Item Proposal (Jan 2017) 52.211-14 Notice of Priority Rating (apr 1008) 252.213-7000 Notice to Prospective Suppliers on Use of Supplier Performance Risk System in Past Performance Evaluations (Sep 2019) Section M - Evaluation Factors for Award 52.212-2 Evaluation Commercial Items FAR Part 13 Best value, SPRS ratings, price and delivery terms G-232-H005 SUPPLEMENTAL INSTRUCTIONS REGARDING INVOICING (NAVSEA) (JAN 2019) (a) For other than firm fixed priced contract line item numbers (CLINs), the Contractor agrees to segregate costs incurred under this contract/task order (TO), as applicable, at the lowest level of performance, either at the sub line item number (SLIN) or CLIN level, rather than at the total contract/TO level, and to submit invoices reflecting costs incurred at that level. Supporting documentation in Wide Area Workflow (WAWF) for invoices shall include summaries of work charged during the period covered as well as overall cumulative summaries by individual labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of other direct costs (ODCs), materials, and travel, by technical instruction (TI), SLIN, or CLIN level. For other than firm fixed price subcontracts, subcontractors are also required to provide labor categories, rates, and hours (both straight time and overtime) invoiced; as well as, a cost breakdown of ODCs, materials, and travel invoiced. Supporting documentation may be encrypted before submission to the prime contractor for WAWF invoice submittal. Subcontractors may email encryption code information directly to the Contracting Officer and Contracting Officer Representative (COR). Should the subcontractor lack encryption capability, the subcontractor may also email detailed supporting cost information directly to the Contracting Officer and COR; or other method as agreed to by the Contracting Officer. (b) Contractors submitting payment requests and receiving reports to WAWF using either Electronic Data Interchange (EDI) or Secure File Transfer Protocol (SFTP) shall separately send an email notification to the COR and Contracting Officer on the same date they submit the invoice in WAWF. No payments shall be due if the contractor does not provide the COR and Contracting Officer email notification as required herein. (End of Text) G-242-H001 GOVERNMENT CONTRACT ADMINISTRATION POINTS-OF-CONTACT AND RESPONSIBILITIES (NAVSEA) (OCT 2018) (a) The Government reserves the right to administratively substitute any of the points of contact listed below at any time. (b) The contracting officer is the only person authorized to change this contract or orders issued thereunder. The Contractor shall not comply with any order, direction or request of Government personnel - that would constitute a change - unless it is issued in writing and signed by the Contracting Officer or is pursuant to specific authority otherwise included as part of this contract. If, in the opinion of the contractor, an effort outside the existing scope of this contract is requested, the contractor shall promptly comply with the Notification of Changes clause of this contract. (c) The points of contact are as follows: (i) The Procuring Contracting Officer (PCO) is: See page 1, Block 24 (ii) The Contract Specialist is: Name: Ryan Hodges E-mail: contact@example.gov Phone: +1 (555) 000-0000 The Administrative Contracting Officer (ACO) is: Not Applicable (d) The Contracting Officer's Representative (COR) is the contracting officer's appointed representative for technical matters. The COR is not a contracting officer and does not have the authority to direct the accomplishment of effort which is beyond the scope of the contract or to otherwise change any contract requirements. An informational copy of the COR appointment letter, which provides a delineation of COR authority and responsibilities, will be provided upon award of this contract. The Contracting Officer's Representative (COR) is: Not Applicable (e) The Alternate Contracting Officer's Representative (ACOR) is responsible for COR responsibilities and functions in the event that the COR is unavailable due to leave, illness, or other official business. The ACOR is appointed by the contracting officer; a copy of the ACOR appointment will be provided upon award of this contract. The Alternate Contracting Officer's Representative (ACOR) is: Not Applicable (f) The Technical Point of Contact (TPOC) is the contracting officer's representative for technical matters when a COR is not appointed. The TPOC is responsible for technical issues of contract administration, such as providing all items of Government Furnished Information (GFI), Government Furnished Material (GFM) and Government Furnished Equipment (GFE) if specified in the contract as well as the inspection and acceptance of all contract deliverables. The Technical Point of Contact (TPOC) is: Name: Email: (g) The Alternate Technical Point of Contact (ATPOC) is responsible for TPOC responsibilities and functions in the event that the TPOC is unavailable due to leave, illness, or other official business. The Alternate Technical Point of Contact (ATPOC) is: Not Applicable (h) The Ombudsman will review complaints from the contractors and ensure that all contractors are afforded a fair opportunity to be considered, consistent with the procedures in the contract. The Ombudsman is: Not Applicable (i) The Authorized Ordering Person(s) for Per-Call Maintenance is responsible for issuing and maintaining records for any per-call orders for remedial maintenance placed under this contract. No per-call order shall be placed outside the scope of this contract and the cumulative total of all orders shall not be in excess of any not-to-exceed amount specified in the contract. Per-call orders shall not, in any way, modify any terms and conditions of the contract. (j) The Authorized Ordering Person(s) for Per-Call Maintenance is: Person(s) listed in (f) with approval from persons listed in ( c ) (i) and (ii). (k) The Contractor's point of contact for performance under this contract is: Name: E-mail: Address: See Block 9 Phone (End of Text) G-242-H002 HOURS OF OPERATION AND HOLIDAY SCHEDULE (NAVSEA) (JUL 2021) (a) The policy of this activity is to schedule periods of reduced operations or shutdown during holiday periods. Deliveries will not be accepted on Saturdays, Sundays or Holidays except as specifically requested by the [insert activity name]. All goods or services attempted to be delivered on a Saturday, Sunday or Holiday without specific instructions from the Contracting Officer or his duly appointed representative will be returned to the contractor at the contractor's expense with no cost or liability to the U.S. Government. (b) The federal Government observes public Holidays that have been established under 5 U.S.C. 6103. The actual date of observance for each of the holidays, for a specific calendar year, may be obtained from the OPM website at OPM.GOV or by using the following direct link: https://www.opm.gov/policy-data-oversight/pay-leave/federal-holidays/. (c) Delayed Opening, Early Dismissal and Closure of Government Facilities. When a Government facility has a delayed opening, is closed or Federal employees are dismissed early (due to severe weather, security threat, security exercise, or a facility related problem) that prevents personnel from working, onsite contractor personnel regularly assigned to work at that facility shall follow the same reporting and/or departure directions given to Government personnel. The contractor shall not direct charge to the contract for such time off, but shall follow parent company policies regarding taking leave (administrative or other). Non-essential contractor personnel, who are not required to remain at or report to the facility, shall follow their parent company policy regarding whether they should go/stay home or report to another company facility. Subsequent to an early dismissal, delayed opening, or during periods of inclement weather, onsite contractors should monitor the OPM website as well as radio and television announcements before departing for work to determine if the facility is closed or operating on a delayed arrival basis. (d) When Federal employees are excused from work due to a holiday or a special event (that is unrelated to severe weather, a security threat, or a facility related problem), on site contractors shall continue working established work hours or take leave in accordance with parent company policy. Those contractor employees who take leave shall not direct charge the non-working hours to the contract. Contractors are responsible for predetermining and disclosing their charging practices for early dismissal, delayed openings, or closings in accordance with the FAR, applicable cost accounting standards, and the company's established policy and procedures. Contractors shall follow their disclosed charging practices during the contract period of performance, and shall not follow any verbal directions to the contrary. The Contracting Officer will make the determination of cost allowability for time lost due to facility closure in accordance with FAR, applicable Cost Accounting Standards, and the Contractor's established accounting policy and procedures. (e) If you intend to visit the Contracts Office, it is advised that you call for an appointment at least 24 hours in advance. (f) The hours of operation are as follows: AREA FROM TO NSWC-PCD and/or NEDU 0700 1600* (g) All deliveries to the Receiving Officer, (See Delivery Schedule, Section F), shall be made Monday through Friday from 0700 to 1600 local time, unless otherwise specified. Deliveries will not be accepted after 1600. No deliveries will be accepted on federal government holidays. ***Note*** Trucks must gain access to the base prior to 1430. (End of text) G-242-W001 CONTRACT ADMINISTRATION FUNCTIONS (NAVSEA) (OCT 2018) (a) In accordance with FAR 42.302(a) all functions listed are delegated to the ACO except the following items to be retained by the PCO: ALL functions listed will be retained by the PCO. (b) In accordance with FAR 42.302(b), the following additional functions are delegated to the ACO: None (End of Text) L-204-H003 NOTIFICATION OF USE OF NAVY SUPPORT CONTRACTORS FOR OFFICIAL CONTRACT FILES (NAVSEA) (APR 2019) (a) NAVSEA may use a contractor to manage official contract files hereinafter referred to as "the support contractor", including the official file supporting this procurement. These official files may contain information that is considered a trade secret, proprietary, business sensitive or otherwise protected pursuant to law or regulation, hereinafter referred to as - protected information. File management services consist of any of the following: secretarial or clerical support; data entry; document reproduction, scanning, imaging, or destruction; operation, management, or maintenance of paper-based or electronic mail rooms, file rooms, or libraries; and supervision in connection with functions listed herein. (b) The cognizant Contracting Officer will ensure that any NAVSEA contract under which these file management services are acquired will contain a requirement that (1) The support contractor not disclose any information; (2) Individual employees are to be instructed by the support contractor regarding the sensitivity of the official contract files; (3) The support contractor performing these services be barred from providing any other supplies and/or services, or competing to do so, to NAVSEA for the period of performance of its contract and for an additional three years thereafter unless otherwise provided by law or regulation; and, (4) In addition to any other rights the offeror may have, it is a third party beneficiary who has the right of direct action against the support contractor, or any person to whom the support contractor has released or disclosed Protected Information, for the unauthorized duplication, release, or disclosure of such Protected Information. (c) Submission of a proposal will be considered as consent to NAVSEA's permitting access to any information, irrespective of restrictive markings or the nature of the information submitted, by its file management support contractor for the limited purpose of executing its file support contract responsibilities. (d) NAVSEA may, without further notice, enter into contracts with other contractors for these services. Offerors are free to enter into separate non-disclosure agreements with the file support contractor. Contact the Procuring Contracting Officer for contractor specifics. However, any such agreement will not be considered a prerequisite before information submitted is stored in the files or otherwise encumber the government. (End of Provision

More opportunities from Department Of Defense → Naval Surface Warfare Center

Same awarding agency

NAICS: 334513
New
Federal
Small Business Set Aside for Sierra Instruments Brand Mass Flow Controller per attachments
Solicitation # N61331-27-Q-KS02
The Naval Surface Warfare Center, Panama City Division, is soliciting quotes for a firm fixed price purchase order to acquire Sierra Instruments Series 100 Smart-Trak2 Mass Flow Controllers (Part number: C100L-DD-2-OV1-SV1-PV2-V1-S4). This procurement is a total Small Business Set-Aside under NAICS code 334513. The hardware is intended for integration with hyperbaric chamber systems to support the evaluation and certification of diver's life support equipment. All units must be delivered with certificates of conformance and standard calibration certificates, as only successfully calibrated articles are qualified for acceptance. Quotes must be submitted on company letterhead with full specifications, CAGE code, and lead time to Kaitlin Summerville by November 4, 2026, at 11:00 AM Central Time. Award will be based on the best value to the government, considering price, delivery, quality, and past performance, with a specific focus on the lowest price for the required brand name product. Delivery is to the Navy Experimental Diving Unit in Panama City, Florida, between 0900 and 1430 on weekdays. Invoicing must be processed through the Wide Area Workflow (WAWF) system with payment terms set at NET 30 days.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332710
New
Federal
Full and Open Opportunity for MK68 Spare and Repair Parts Fabrication IAW the attached NAVSEA Drawing, SOW, and ALL additional attachments. Provide your Cage Code on the Quote and Submit the Cost Breakdown Spreadsheet.
Solicitation # N61331-27-Q-JC03
The Naval Surface Warfare Center Panama City Division is soliciting bids for the acquisition and fabrication of spare and repair parts for the MK68 System under solicitation N61331-27-Q-JC03. The scope of work requires the contractor to provide all necessary materials, facilities, and personnel to fabricate and assemble specific components, including six Housing Control Underwater Mine EX 1 MOD 0 assemblies, four MK 68 MOD 1 Thermal Battery Connector Assemblies, and four end caps. All fabrication must strictly adhere to provided NAVSEA drawings and technical standards, including ASME and ASTM specifications. The period of performance extends from the date of award until 180 days thereafter, with final delivery required at the NSWC PCD facility in Panama City, Florida. Award will be based on the best value to the government, evaluating price, delivery, quality, and past performance via the Supplier Performance Risk System. Prospective vendors must submit a quote package that includes their CAGE code and a completed cost breakdown spreadsheet. Mandatory requirements include the ability to invoice through the Wide Area Workflow system and compliance with strict packaging and marking standards, such as MIL-STD-129 and MIL-STD-1686 for electrostatic discharge control. Security protocols are emphasized, requiring the protection of critical information and the destruction of unclassified limited documents to prevent unauthorized disclosure.
Machine Shops

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS