Solenoid

The contract involves the procurement of eight electrical solenoids, identified by National Stock Number 5945-01-599-6163 and part number EOP2T07, specifically designed for use on Cutler Hammer/Eaton JD circuit breakers used in WLIC-75 and WLIC-160 systems. The solicitation, issued under number 70Z08526Q40130B00 by the Department of Homeland Security’s SFLC Procurement Branch 2, is a total small business set-aside under FAR 19.5, with a NAICS code of 335999. All items must be individually packaged per MIL-STD-2073-1E Method 10, using cushioned, appropriately sized ASTM-D5118 double-wall fiberboard boxes to prevent corrosion, deterioration, and physical damage during transit and storage. Each package must be marked in full compliance with MIL-STD-129R, including the NSN, item name, part number, quantity, condition code “COND-A,” contract number, and vendor name, with barcoding strictly adhering to ISO/IEC-16388-2007 using Code 39 symbology. Failure to meet packaging, marking, or barcoding standards will result in warehouse rejection and return of the shipment at the vendor’s expense. Deliveries are required F.O.B. Destination to the USCG Surface Forces Logistics Center at 2401 Hawkins Point Road, Building 88, Receiving Room, Baltimore, MD 21226, with the place of performance also cited as Curtis Bay, Maryland. Invoicing must be submitted electronically through the Invoicing and Payment Portal (IPP), and payments will be processed via Electronic Funds Transfer. The solicitation is open only to small businesses, with responses due by May 8, 2026, and key points of contact include Brady Myers, Carlos Diaz Garcia, and Daniel J. Nieves for logistical and technical inquiries. While standard FAR clauses on ethics, labor standards, equal opportunity, trafficking in persons, prompt payment, and commercial item requirements are incorporated, no pricing data is provided, and no evaluation factors or basis of award (e.g., LPTA or trade-off) are explicitly defined in the documentation. The supply is strictly limited to the specified part number with no substitutions permitted, and all