This Sources Sought opportunity from Department Of The Interior was posted on July 9, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
The U.S. Department of the Interior, through the IBC Acq Svcs Directorate, is seeking information from capable small businesses to assist in the design and execution of repairs and modernization work on the Dalton Mountain Multi-use Range located at Fort Hood, Texas. This sources sought notice is not a solicitation for bids or proposals and does not obligate the government to award a contract; respondents participate voluntarily with no expectation of reimbursement. Interested parties must be active in the System of Award Management (SAM) and classified under NAICS code 236220 for commercial and institutional building construction, with a preference historically given to Service-Disabled Veteran Owned Small Businesses. Respondents are required to submit a capabilities statement demonstrating their ability to perform the full scope of work outlined in the draft Statement of Work, including both base and optional tasks, accompanied by proof of current SAM registration. The estimated total value of the project, inclusive of all base and optional tasks, is up to $15 million. All responses must be submitted via email to Kevin Woody at [email hidden] no later than July 16, 2026, at 4:00 PM EDT, and no inquiries regarding the notice will be answered. Supporting technical documentation, including exhibits detailing gate designs, existing range conditions, target systems, spare parts, environmental seeding requirements, mandatory shutdown times, firing positions, and photographic records, is available to inform responses. The solicitation number is DOIDFBO260067, and the notice was posted on July 9, 2026. No contract clauses, evaluation factors, delivery schedules, pricing details, inspection criteria, or administrative provisions are included in this notice.
General Info
U.S. Interior seeks SAM-registered small businesses for $15M range repairs at Fort Hood, Texas, due July 16, 2026.
HighAI Summary for EXHIBIT H - Portable H-SAT Specifications: This document, titled EXHIBIT H - Portable H-SAT Specifications, outlines the technical requirements for a Portable H-SAT system. Key specifications include a minimum load lift of 300 lbs, lift and lower times of 12 and 10 seconds respectively under 0 and 35 mph wind conditions, and a target arm weight of 400 lbs. The presentation requirement mandates that at least 90% of the target be exposed above the berm with no part of the lifting arm exposed for direct fire. The MESH network and power requirements sections emphasize similar exposure criteria. Operational metrics include 20 cycles per hour and 150 cycles without regenerating power supply per 24 hours, with a mean time between failures of 5000 cycles. The document appears to be a technical specification version 2.0.0.0.0.0.0.0.0.0.0.
PDF
PDF, High priority: read this first13 pages · specifications
HighAI Summary for Exhibit J - Moving Armor Target (MAT) - Aug 2017: This document, dated August 2017, provides detailed specifications and design guidance for the Moving Armor Target (MAT) used in U.S. Army training ranges. It covers the general description, civil engineering and siting requirements, drainage considerations, target clearance, configuration, wall height, angle of fire, wall design, berm criteria, and direction of fire. The MAT supports vehicle, dismounted, and aerial gunnery training with a standard track length of 350 meters. The document emphasizes proper emplacement design to ensure target functionality and protection of electrical equipment, including specific slope and clearance requirements. It serves as a technical reference for range designers and engineers to ensure compliance with training and safety standards.
PDF
PDF, High priority: read this firstspecifications
HighAI Summary for EXHIBIT K - Target Protection - July 2017: This document, dated July 2017, provides detailed specifications for target protection berms used in military training ranges. It outlines the required berm dimensions to protect target emplacements from various weapons, emphasizing that berm thickness, not walls, provides protection. The document includes design curves for berm thickness based on projectile type, soil compaction, and in-place soil density, covering calibers from 5.56 mm to 120 mm. It also discusses direction of fire considerations, maintenance cycles, and soil density standards. The purpose is to guide designers and range trainers in balancing berm thickness, maintenance, and protection effectiveness for different range types and weapon systems.
PDF
PDF, High priority: read this firstexhibit-spare-parts
HighAI Summary for EXHIBIT S - Target Spare Parts List: This document, titled EXHIBIT S - Target Spare Parts, provides a detailed list of spare parts including vendor names, part numbers, item descriptions, and quantities required. The parts range from power supplies, sensors, motors, circuit boards, cables, and various assemblies from multiple vendors such as Automationdirect.com, DigiKey, Galco Industrial, In Veris, SAAB, and others. The document appears to be an exhibit related to a contract or procurement, listing specific components needed for maintenance or production purposes. It is structured in tabular format across multiple pages, ensuring clarity in part identification and quantity needed.
PDF
PDF, High priority: read this firstsow
HighAI Summary for Fort Hood DMMU MAT8 Mover Wall Replacement SOW 23JUN26: This Statement of Work (SOW) dated 24 June 2026 outlines the project for repairing and modernizing the Dalton Mountain Multi-Use (DMMU) MAT8 Mover Wall at Fort Hood, Texas. The document details the scope including base bid and multiple optional tasks involving replacement of moving armor target timbers, installation of target equipment, and various construction and repair activities. It specifies contractor qualifications, proposal requirements including a rapid design-build plan, material procurement, construction schedule from November 23, 2026 to January 21, 2027, and government responsiveness. Applicable references and detailed preconstruction tasks are also included to ensure project readiness and compliance.
PDF
PDF, High priority: read this first13 pages · specifications
HighAI Summary for Stationary Armor Target (SAT) Emplacement Design Guidance - Aug 2017: This document provides detailed design guidance for the Stationary Armor Target (SAT) emplacement used in military training ranges. It covers general information, civil engineering and siting considerations, emplacement construction details including above-grade and below-grade options, drainage requirements, target clearance, configuration, wall height, angle of fire, and wall design. The document aims to ensure proper installation and protection of SAT targets and associated equipment, addressing issues such as drainage, unexploded ordnance, line-of-sight, and maintenance. It includes standard dimensions and design parameters to support various training scenarios and weapon systems, dated August 2017.
PDF
PDF, Low priorityexhibit
LowAI Summary for Exhibit BB - Modified Firing Position Fort Hood TX Revision 6: This document is Exhibit BB titled 'Modified Firing Position Fort Hood, Texas' Revision 6. It includes a cover sheet and index, project location details, firing position plan views and sections, and composite deck platform details across five sheets. The location is to be determined by award from specified ranges including Clear Creek Rifle Alpha and Bravo, Pilot Knob Rifle Alpha, Black Gap Rifle Charlie, and Qualification Training Range.
PDF
PDF, Low priorityother
LowAI Summary for Exhibit D - Gate Design: This document is titled 'Exhibit D - Gate Design'. It appears to be an exhibit related to gate design, but no further content or details are provided in the document content supplied.
PDF
PDF, Low priorityexhibit
LowAI Summary for Exhibit E - DMMU MAT System Locations and Existing Conditions: This document is Exhibit E titled 'DMMU MAT System locations and existing conditions.' It appears to provide information about the locations and existing conditions of the DMMU MAT System. The document content is minimal and does not include detailed technical specifications or solicitation information.
PDF
PDF, Low priorityother
LowAI Summary for EXHIBIT F - 1984 DMMU Asbuilts: The document titled 'EXHIBIT F - 1984 DMMU Asbuilts' appears to be a set of as-built drawings or related materials from 1984. The content is not readable or extractable from the provided data, indicating it may be a scanned or image-based PDF without text content. No specific procurement-related information, solicitation details, or contract data are available from the provided content.
PDF
PDF, Low priorityother
LowAI Summary for EXHIBIT F - 1984 DMMU Asbuilts: The document titled 'EXHIBIT F - 1984 DMMU Asbuilts' appears to be a set of as-built drawings or related exhibit materials from 1984. The content is not readable or extractable from the provided data, indicating it may be a scanned or image-based PDF without text content. No specific procurement or contract information is discernible.
PDF
PDF, Low priorityother
LowAI Summary for EXHIBIT G - Range Limit Marker Drawings: This document is titled EXHIBIT G and contains Range Limit Marker Drawings. No additional details or specifications are provided in the content. The document appears to be an exhibit related to a contract but lacks further context or technical information.
PDF
PDF, Low priorityother
LowAI Summary for Exhibit L - Portable Armored Target Protection: This document is titled 'Exhibit L - Portable Armored Target Protection.' No additional content or details are provided within the document, making it unreadable for further extraction of procurement-related information.
PDF
PDF, Low priority1 page · exhibit
LowAI Summary for Exhibit M - Mandatory Shutdown Times Schedule: This document, titled Exhibit M, outlines the mandatory shutdown hours for various dates spanning from March 2026 to February 2027. It specifies two daily shutdown periods for each date range, typically in the early morning and evening hours. The schedule provides precise times for each month, indicating when shutdowns are required to occur.
PDF
PDF, Low priority1 page · exhibit
LowAI Summary for Exhibit M - Species List for Range Seed: Exhibit M provides a detailed species list for range seed including grass and forb species with their respective seeding rates per acre. The document lists various native grass species such as Blackwell Switchgrass and Haskell Sideoats Grama, as well as forb species like Awnless Bush Sunflower and Purple Prairie Clover. It also includes supplier information for Turner Seed and Native American Seed Company, with contact details and a link to a Blackland Prairie Mix product. This exhibit supports procurement by specifying seed composition for range restoration or similar projects.
PDF
PDF, Low priorityexhibit
LowAI Summary for Exhibit P - DMMU Target Designation Reference TAB A - Moving Armored Targets: This document is Exhibit P, specifically TAB A, detailing the designation and condition of Moving Armored Targets (MATs) as of 2024. It includes a table listing current designations, 1985 designations, timber wall conditions, and the age of the targets built in 1984, noting that the timber walls are failing or falling.
PDF
PDF, Low priorityexhibit
LowAI Summary for Exhibit P - DMMU Target Designation Reference Tab B - Stationary Armored Targets: This document is Exhibit P, specifically Tab B, detailing the designation and electrical power information for Stationary Armored Targets (SATs). It includes a comprehensive table listing target numbers, original designations, electrical features such as mini power panels, handholes, and power sources. The document serves as a reference for the configuration and power supply details of various SATs used in the DMMU context.
PDF
PDF, Low priorityexhibit
LowAI Summary for Exhibit T - Water Point Installation Notes: This document appears to be an exhibit related to a water point installation, containing specific installation notes such as ladder height restrictions to prevent hazards, addition of AVN Balls towards JMMU, and removal of trees within a fenced area. The document provides safety and site preparation instructions but lacks detailed solicitation or contract information.
PDF
PDF, Low priorityexhibit
LowAI Summary for Exhibit V - Existing Conditions Photos Fort Hood TX: This document is Exhibit V titled 'Existing Conditions Photos' related to Fort Hood, TX. It appears to be a photographic exhibit associated with a contract or project, provided by PKRA and CCRA. The document contains images or references to existing conditions at the site but lacks detailed textual content or specifications.
This Sources Sought notice is issued by the government to acquire information regarding able and available contractors to perform design and execute repairs and modernization of the Dalton Mountain Multi-use (DMMU) Range on Fort Hood, TX. Contractors who choose to respond to this notice do so voluntarily with no expectation of reimbursement of any kind at any point. The government is looking for active System of Award Management (SAM) registered small businesses with the NAICS 236220 in their SAM profile. In the past, this work has been performed by Service-Disabled Veteran Owned Small Businesses (SDVOSB). Each respondent is asked to submit a capabilities statement reflective of their ability to do the work as outlined in the draft Statement of Work (SOW) attached to this notice, including all base and optional tasks, along with proof of their active SAM registration. The disclosure of magnitude for this project is between up to $15M, which includes all base and optional tasks. Responses to this notice are due no later than July 16, 2026 at 4:00PM (EDT) and shall be emailed to Kevin Woody at •••••@•••••.•••Sign up to see this detail. No questions will be answered regarding this notice.
Z2PZ REPAIR OR ALTERATION OF OTHER NON-BUILDING FACILIT
236220 Commercial and Institutional Building Construction $45
More opportunities from Department Of The Interior → Ibc Acq Svcs Directorate (00004)
