Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Specialized Materials Testing and Validation

Active

Federal

Response Deadline09/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Specialized Materials Testing and Validation subcontract, issued by the Department of Defense ASC Commodities Division, requires the performance of technical materials testing for prime contractors. The selected provider will conduct tests specified in the TDP, including metallurgy, stress testing, and dimensional verification, while ensuring all measurements and tolerances adhere to the DLA Master List of Technical and Quality Requirements. The contractor is responsible for recording actual results using specialized laboratory equipment and delivering formal test reports along with material and process certifications. This opportunity is categorized under NAICS code 541620, with the place of performance located in New Cumberland, Pennsylvania. The response deadline for this requirement is September 23, 2026.

General Info

DoD subcontract for materials testing and validation in Pennsylvania, due September 23, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-26-T-29VA.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PRODUCTION LOT TESTING

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 23

Submission deadline

Response Deadline

09/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical materials testing for prime contractors on ASC Commodities Division projects. Conducts tests specified in the TDP, measures tolerances, and records actual results using laboratory equipment for metallurgy, stress testing, or dimensional verification. Adheres to the DLA Master List of Technical and Quality Requirements. Delivers formal test reports and material/process certifications.

Similar Contracts

Same NAICS industry code

Environmental Consulting & TestingThis subcontract for Environmental Consulting and Testing involves providing environmental monitoring and hazardous material testing for prime contractors on US Air Force facility projects at Dyess AFB. The scope of work focuses on monitoring for asbestos and other hazardous substances during renovation and demolition activities in accordance with Specification Section 00 01 04, while ensuring strict pollution abatement and compliance with 49 U.S.C. section 5103. The selected provider will be responsible for delivering comprehensive environmental compliance reports and testing certifications. This opportunity falls under NAICS code 541620 and is managed by the Department of Defense agency FA4661 7 Cons Cd, with performance taking place in Dyess AFB, Texas.

FA4661 7 Cons Cd

POSTED

about 12 hours ago

DEADLINE

Environmental ServicesThis subcontract for Environmental Services supports prime contractors on projects for the Town of Granite Falls, North Carolina. The selected provider will be responsible for conducting environmental impact studies, regulatory compliance reviews, and environmental assessments using specialized sampling equipment and regulatory databases. Key deliverables include comprehensive environmental assessment reports, compliance audits, and detailed mitigation plans. To qualify for this engagement, personnel must hold Professional Geologist or Environmental Engineer licenses. The contract falls under NAICS code 541620 and was posted on September 15, 2026, with a response deadline of September 18, 2026.

Town of Granite Falls

POSTED

about 19 hours ago

DEADLINE

Update of the North Carolina Beach and Inlet Management Plan (BIMP)

Solicitation # Doc2398641904

The North Carolina Department of Environmental Quality is seeking a qualified contractor with expertise in coastal processes, inlets, and beach management to update the 2016 Beach and Inlet Management Plan. This comprehensive project focuses on managing the state's 19 active tidal inlets and 320 miles of oceanfront beaches. Interested parties must submit their responses by September 30, 2026, at 2:30 PM. The solicitation, identified by number Doc2398641904, is managed by primary point of contact Leroy Kodak and will be performed within the state of North Carolina.

Department of Environmental Quality

POSTED

about 19 hours ago

DEADLINE

R10 START VI: Superfund Technical Assessment & Response Team (START) VI

Solicitation # 68HE0726R0037

POSTED

about 20 hours ago

DEADLINE

On-Site Biological Construction MonitoringThis subcontract for UC Santa Cruz requires the provision of real-time biological monitoring for prime contractors working on facility projects. The selected provider must maintain an on-site presence throughout construction phases to ensure strict adherence to biological mitigation plans and the maintenance of no-work buffers. Qualified candidates must possess biological monitoring experience and current OSHA construction site safety certifications. The scope of work includes the delivery of detailed monitoring logs and compliance reports. This opportunity was posted on September 14, 2026, with a response deadline of October 9, 2026, under NAICS code 541620.

POSTED

DEADLINE

Special-Status Species Survey and Mitigation PlanningThis subcontract for UC Santa Cruz involves providing specialized biological surveys and mitigation planning for special-status plant and animal species on facility projects. The selected contractor will support prime contractors by performing pre-construction surveys, establishing no-work buffers, and developing comprehensive impact avoidance and mitigation plans. Success in this role requires expert knowledge of state and federal endangered species lists to ensure all activities comply with environmental regulations. The contractor is responsible for delivering detailed mitigation plans, buffer zone maps, and formal records of coordination with regulatory agencies. This opportunity is categorized under NAICS code 541620 and was posted on September 14, 2026, with a response deadline of October 9, 2026.

POSTED

DEADLINE

Biological Resource Assessment and Technical ReportingThis subcontract for Biological Resource Assessment and Technical Reporting involves performing field-based biological resource assessments for prime contractors on UC Santa Cruz facility projects. The selected provider will conduct site surveys to identify biological resources and prepare formal technical reports to ensure full compliance with CEQA as well as local, state, and federal regulations. The scope of work requires the use of specialized field survey equipment and GIS mapping tools to deliver comprehensive resource assessment documentation. This opportunity is categorized under NAICS code 541620 and is associated with the agency of UC Santa Cruz in California, with a response deadline of October 9, 2026.

POSTED

DEADLINE

RFQ - Biological Services for the Heller Student Housing Project

Solicitation # 4204BIO

The University of California, Santa Cruz Department of Physical Planning, Development and Operations is soliciting qualifications from biological consulting firms to provide environmental compliance support for the Heller Student Housing Project. Located on the former Family Student Housing site adjacent to Heller Drive, this major on-campus development requires services to ensure compliance with the California Environmental Quality Act and other local, state, and federal regulations. The scope of work includes field-based biological resource assessments, pre-construction surveys for special-status species, impact avoidance and mitigation planning, the preparation of technical reports, on-site construction monitoring, and the delivery of Worker Environmental Awareness Program training. The University intends to select up to three firms to provide these services on an as-needed basis under a Blanket Professional Services Agreement. The initial contract term is three years, with the possibility of two additional one-year extensions by mutual agreement. Interested firms must submit a Statement of Qualifications and related experience documentation using the University's standard forms via the UC Santa Cruz Online PlanRoom by 2:00 PM on October 9, 2026. Selection will be based on a review of qualifications and interviews with shortlisted firms.

POSTED

DEADLINE

PFAS Compliance Design & Consulting Services

Solicitation # 26-60

The Port of Vancouver USA is issuing a Request for Qualifications under solicitation number 26-60 to secure a highly qualified consultant for PFAS Compliance Design and Consulting Services. The primary objective is to evaluate, develop, and design a treatment system that ensures compliance with applicable PFAS Maximum Contaminant Levels. The selected consultant will provide expert guidance on feasible treatment options and support the project through final design and construction. This is a one-step unsealing process open for bidding with a clarification deadline of October 7, 2026, and a final due date of October 21, 2026. A single contract may be awarded to a firm that demonstrates significant experience in the required activities. All proposals must be submitted in USD and adhere to the specified timeline to be considered for this professional services agreement.

Port of Vancouver USA

POSTED

DEADLINE

in about 1 month

Airport Environmental Consulting ServicesThis subcontract for Airport Environmental Consulting Services supports the City of Sylvester by providing environmental assessments and compliance reviews for airport projects. The scope of work includes conducting noise studies, wetland delineations, environmental impact studies, and NEPA compliance reviews utilizing specialized sampling and analysis tools. The selected provider is responsible for delivering comprehensive environmental assessment reports and official compliance certifications. To qualify for this engagement, personnel must hold professional environmental certifications such as CEP or PE, in accordance with GDOT and federal aviation regulations. This opportunity falls under NAICS code 541620, with a response deadline of October 15, 2026.

City of Sylvester

POSTED

DEADLINE

Arboricultural Consulting & Quality AssuranceThe Arboricultural Consulting and Quality Assurance subcontract for the Mississippi Forestry Commission involves providing professional oversight and quality control for prime contractors on municipal projects. The selected provider is responsible for supervising planting activities to ensure mortality rates remain below 10 percent, conducting Spring inspections, and developing comprehensive municipal watering plans. Technical requirements include the use of GPS mapping tools to generate Project Planting Reports and the delivery of detailed GPS maps and watering plans. To qualify for this role, the contractor must hold a mandatory ISA-certified arborist certification. The solicitation was posted on September 14, 2026, with a response deadline of October 1, 2026.

MS FORESTRY COMMISSION

POSTED

DEADLINE

HazMat Packaging and Labeling ServicesThis subcontract for HazMat Packaging and Labeling Services supports DLA Land and Maritime supply chain projects by providing specialized handling of hazardous materials. The contractor is responsible for identifying hazardous components, generating and verifying Safety Data Sheets, and ensuring all labeling and shipment markings comply with 29 CFR 1910.1200 and MIL-STD-129 standards. The final deliverable consists of compliantly labeled shipping containers and a complete HazMat documentation package. The project is managed under the Department of Defense for the Land Supply Chain agency and will be performed in San Diego, California. Classified under NAICS code 541620, the opportunity was posted on September 14, 2026, with a response deadline of September 25, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Precision Thread Gauging and Inspection ServicesThe Precision Thread Gauging and Inspection Services subcontract, issued by the Department of Defense ASC Commodities Division, involves performing dimensional conformance testing and quality assurance inspections for prime contractors delivering DLA supply contracts. The scope of work focuses on inspecting Class 3A and 3B threads using System 22 of FED-STD-H28/20 and verifying inspection results according to MIL-STD-1916. The service provider is required to use calibrated thread gauges and measurement tools compliant with FED-STD-H28/20 to deliver detailed inspection reports and certifications of conformance. This project falls under NAICS code 541380 and is to be performed in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

Socket Head Cap Screw Supplier/ManufacturerThis subcontract opportunity with the Department of Defense ASC Commodities Division involves the manufacture and supply of socket head cap screws for prime contractors fulfilling DLA supply contracts. The supplier must ensure all screws conform to Class 3A and 3B thread specifications and adhere to strict quality standards, including dimensional conformance inspections per System 22 of FED-STD-H28/20 and identification marking according to MIL-STD-130N. Quality assurance must be conducted per MIL-STD-1916, with all finished products delivered alongside the necessary inspection certifications. The contract falls under NAICS code 332722 and specifies a place of performance in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, to the solicitation posted on September 15, 2026. The role requires the use of precision threading and gauging equipment to maintain the high technical standards required for these military-grade components.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Liquid Sight Indicators (NSN 014633075)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of three specialized liquid sight indicators identified by NSN 014633075 and FSC 6680. The provider is responsible for manufacturing or sourcing the hardware and must include all necessary Safety Data Sheets and Hazard Warning Labels for any hazardous materials. The items are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This requirement falls under NAICS code 332999 and is intended for prime contractors delivering DLA Aviation supply contracts.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Tee Head Bolts (NSN 5306011346566)This subcontract involves the supply of 21 specialized Tee Head Bolts, identified by NSN 5306011346566, for prime contractors working on ASC Commodities Division projects under the Department of Defense. The contractor is responsible for manufacturing or sourcing the bolts and ensuring they meet strict quality and marking standards, specifically adhering to MIL-STD-129 for marking and MIL-STD-1916 or ASQ H1331 for sampling. The agreement requires full compliance with the DLA Master List of Technical and Quality Requirements, including RQ011. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332722. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

DLA-Compliant Packaging and CratingThis subcontract with the Department of Defense ASC Commodities Division involves specialized packaging and labeling of hardware for prime contractors fulfilling DLA supply contracts. The service provider is responsible for packaging screw assemblies in accordance with RP001 standards, utilizing military-grade materials and moisture-barrier packaging to ensure compliance. Additionally, the contractor must apply all required military shipping labels and markings to prepare shipments for First Destination Transportation. The project is based in New Cumberland, Pennsylvania, under NAICS code 488510. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

Manufacture and Supply of Panel Screw Assemblies (NSN 5305010097364)This subcontract with the Department of Defense ASC Commodities Division involves the precision manufacture and supply of panel screw assemblies under NSN 5305010097364. The contractor is responsible for fabricating the components using industrial machining equipment and ensuring all items meet the DLA Master List of Technical and Quality Requirements as specified in RA001. Packaging must adhere to RP001 standards, with finished goods delivered FOB Origin from the performance location in New Cumberland. The contract falls under NAICS code 332722 and is designed to support prime contractors fulfilling DLA supply requirements.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Shoulder Washers (NSN 5310012091665)This subcontract through the ASC Commodities Division of the Department of Defense involves the supply of 358 shoulder washers conforming to NSN 5310012091665 specifications. The selected provider is responsible for manufacturing or sourcing the components and ensuring all items are packaged according to ASTM D3951 and marked and labeled in compliance with MIL-STD-129. The project falls under NAICS code 332722 and is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by September 23, 2026, to fulfill the requirements for the prime contractor on this DLA supply contract.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of NAS1189 Machine ScrewsThis subcontract through the Department of Defense ASC Commodities Division requires the supply of 89 aerospace-grade machine screws, specifically part number NAS1189E4P8LK. The contractor must ensure all products adhere to NAS1189 Revision 16 and NAS4002 Revision 12, with marking and packaging performed according to MIL-STD-129. The provider must maintain quality systems compliant with SAE AS9003 or ISO 9001 and ensure full DFARS Buy American compliance. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Open End WrenchesThis subcontract, issued by the ASC Commodities Division of the Department of Defense, requires the supply of 11 open end wrenches for prime contractors supporting DLA Aviation supply contracts. The provider must source or manufacture wrenches that match NSN 5120016001274 and strictly adhere to the DLA Master List of Technical and Quality Requirements to ensure all materials conform to the associated technical specifications. The opportunity was posted on September 15, 2026, with a response deadline of September 23, 2026. The contract falls under NAICS code 423830 and specifies New Cumberland, Pennsylvania, as the place of performance.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Supply of Continuous Thread Studs (NSN 5307006376463)This subcontract involves the manufacture or sourcing of 78 units of continuous thread studs, identified by NSN 5307006376463, to support prime contractors delivering for the ASC Commodities Division of the Department of Defense. The supplier must ensure all items comply with Commodity Specification IP056 regarding the prohibition of mercury. The contract requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, with palletization following RP001 standards. All 78 units are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California.

Glass Container Manufacturing

POSTED

about 7 hours ago

DEADLINE

Defense-Standard Packaging and Shipping ServicesThis subcontract for Defense-Standard Packaging and Shipping Services supports the ASC Commodities Division within the Department of Defense. The contractor is responsible for providing specialized military packaging and logistics for prime contractors, specifically involving the delivery of 368 properly packaged and palletized units to DLA Distribution Depot Hill. All work must be performed at Hill AFB and adhere to strict technical standards, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 for palletization. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 561910. Interested parties must respond by September 23, 2026, following the posting date of September 15, 2026.

Packaging and Labeling Services

POSTED

about 7 hours ago

DEADLINE

Supply of Self-Locking Blind Nuts (NAS1734-4L2P)This subcontract involves the supply of 368 self-locking blind nuts, specifically NAS1734-4L2P hardware, for prime contractors working on ASC Commodities Division projects under the Department of Defense. The contractor is responsible for manufacturing or sourcing the nuts in accordance with NAS1734 and TDP Rev D Gen 4, while ensuring all marking adheres to MIL-STD-130N and the DLA Master List of Technical and Quality Requirements for Critical Application Items. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332722, with the place of performance located at Hill AFB. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS