This Government Contract opportunity from Michigan was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Specialty Paper and Envelope Supply for Secure Mailers

Closed

State & Local

Submission Closed07/17/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 322220

New

DIBBS

Waterproof/Greaseproof Packaging ProviderThis subcontract opportunity is for a provider to deliver specialized packaging services for prime contractors supporting the Department of Defense, specifically under the DLA Weapons Support Land Supplier Opns Vehicle Spt. The scope of work involves the packaging and sealing of 30 individual units of seals using medium duty, waterproof, greaseproof, and opaque bags. To prevent moisture ingress and contamination in accordance with Section C requirements, the provider must utilize industrial vacuum or heat sealing equipment. The project will be performed in Patuxent River, Virginia, under NAICS code 322220. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0326

Solicitation SPE8E5-27-T-0326 is a request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 391 rolls of luminous tape under NSN 9390014626814. The items are specified as 1 inch by 50 yards per roll, with 3M Company and Jessup Manufacturing Company identified as potential sources. The contract is a HUBZone set-aside and requires delivery within 36 days of award, with a need ship date of August 7, 2026, and an original required delivery date of January 6, 2027. Shipping is designated as FOB Origin, with the final destination being DLA Distribution San Diego. The procurement is subject to strict quality and safety standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and shelf-life labeling. Hazardous material identification must comply with 29 CFR 1910.1200, and the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the supplies. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses regarding sustainable products, cyber incident reporting, and the Buy American Act. Quotations must be submitted by November 9, 2026.

POSTED

DEADLINE

Custom Die-Cut Protective Packaging for Shock AbsorbersThis subcontract opportunity is for the provision of custom-engineered die-cut cushioning and containers to support the DLA Weapons Support Maritime Supply Chain. The primary objective is to produce snug-fitting cushioning designed to immobilize shock absorbers and protect product rods from damage during transport. The contractor is responsible for delivering high-burst-strength unit containers and custom inserts that strictly adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards. The project is designated as a Total Small Business Set-Aside under NAICS code 322220 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 5, 2026, to be considered for this specialized packaging requirement.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Pressure Seal V-Fold Mailer

Solicitation # 041115-27-0002

The U.S. Census Bureau National Processing Center is soliciting quotes for a firm-fixed-price delivery order of 1,336 cartons of Pressure Seal Paper to support secure, envelope-free mailings for various survey and correspondence programs, including the American Community Survey and Annual Building Permits Survey. The required materials must be 8.5 by 11-inch, sub-28 lb. white paper stock in a V-fold, duplex pressure-seal format. Technical specifications require the paper to be Seal-MOCR compatible with one-color printing using customer-specified ink, no block-out pattern, and a specific adhesive pattern. Packaging must consist of 2,000 sheets per carton, with a maximum of 108,000 sheets per pallet and a maximum allowable overrun of 10 percent. This procurement is a total small business set-aside, and award will be based on a best-value determination where price and delivery timeline are considered equally important. Quotes will first be evaluated for technical acceptability on a pass/fail basis. Delivery is required at the Census Bureau facility in Charlestown, Indiana, with the government seeking the earliest possible delivery date. Interested offerors must submit their technical and price quotations via email by November 4, 2026, at 2:00 PM EST. Payments will be processed electronically through the Invoice Processing Platform System via Electronic Funds Transfer.

Department Of Commerce Census

POSTED

DEADLINE

Solicitation # 92100-eRFQ-002119-2027

Solicitation 92100-eRFQ-002119-2027 is a request for quote issued by Georgia Correctional Industries to establish an Open Agency contract for the procurement of Patty Paper Rolls. The contract begins on the date of award and includes four optional one-year renewals at the sole discretion of the state entity. Bidders must submit electronic responses in PDF format via the GA@WORK marketplace by November 2, 2026. All line item pricing must include delivery costs, and there is no guaranteed volume or commitment of funds. To be considered for award, bidders must strictly adhere to submission guidelines, specifically avoiding the use of shorthand such as comply, yes, ok, or checkmarks on the detailed specification sheet. Required documentation includes supplier demographics regarding small, minority, and women-owned business status, as well as certification of Georgia residency and scrutinized company status per O.C.G.A. Section 50-5-84. Offerors must also agree to the State of Georgia Contract terms and conditions without any edits or exceptions.

Georgia Correctional Industries Administration

POSTED

DEADLINE

Medical-Grade Foil Packaging SupplierThis subcontract involves the supply of specialized medical-grade perforated foil packaging for prime contractors serving the Department of Defense, specifically the DLA Troop Support Medical Supply Chain. The scope of work focuses on manufacturing perforated foil pouches tailored for twin-pack chest seal configurations, ensuring that the packaging maintains strict sterility and a shelf life of 60 months. All deliverables must adhere to MIL-STD-129 packaging and marking standards to ensure regulatory compliance. The performance of this contract is centered in Lansing, Michigan, under NAICS code 322220.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supplier of Pressure Sensitive Adhesive TapeThis subcontract involves the supply of pressure sensitive adhesive tape to prime contractors supporting Department of Defense supply contracts through the Construction and Equipment T & IFO EQ agency. The selected supplier is responsible for manufacturing or sourcing tape that meets strict government specifications, ensuring all materials comply with ASTM D3951 and that packaging and marking adhere to MIL-STD-129. Additionally, the provider must submit source approval request documentation per RC001 and maintain full compliance with the Buy American Act and DFARS 252.204-7016. The contract falls under NAICS code 322220 and specifies the place of performance in Decatur, Illinois. Interested parties must note the response deadline of November 5, 2026, for this procurement effort. The primary objective is the consistent delivery of high-specification adhesive tape that meets all regulatory and military standards for government use.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

TAPE, PRESSURE SENSITIV

Solicitation # SPE8EN-27-T-0207

Solicitation SPE8EN-27-T-0207 is a request for quotations issued by the Defense Logistics Agency for the procurement of pressure sensitive adhesive tape, identified by NSN 7510014670683. The requirement is for two rolls, with each roll consisting of 36 yards. The material is classified as a Type I Code H item with a non-extendable shelf life of 12 months. Reference part numbers include Telephonics Corp P/N T235A195 and Robert McKeown Company, Inc. P/N Kapton K250. The delivery is required within 5 days after receipt of order, with an original required delivery date of October 22, 2026. Shipping is FOB Origin, and the destination for inspection and acceptance is the Illinois Army National Guard AASF 1 in Decatur, Illinois. The contract incorporates several technical and quality requirements from the DLA Master List, including RP001 for packaging and RC001 for source approval request documentation. Packaging must comply with MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous materials, while hazardous materials must follow TQ requirement IP025 and the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation is not a small business set-aside and falls under NAICS code 322220. It also includes various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0346

Solicitation SPE8E6-27-T-0346 is a procurement request for 18 units of a label identified by NSN 7690-01-379-7375. The items are to be delivered FOB Origin to the DLA Distribution Disp New Cumberland Facility in Pennsylvania, with a required delivery date of December 13, 2026, and a need ship date of May 4, 2026. The procurement specifies a delivery window of 26 days after receipt of order. Technical compliance requires adherence to Basic Drawing NR 53711 and specific reference specifications, including a non-extendable 24-month shelf life for Type I Code M items. The contract mandates strict adherence to military standards for packaging and marking, specifically MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Cybersecurity and information security are prioritized through the inclusion of CMMC Level 2 requirements and DFARS 252.204-7012 for safeguarding covered defense information. While this is not a small business set-aside, a price evaluation preference is available for certified HUBZone small businesses. Notably, the government will not evaluate or award to offers utilizing additive manufacturing processes. Invoicing and payment must be processed electronically via the Wide Area Workflow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Non-Metallic Hose Assemblies (NSN 4720014699259)This subcontract involves the manufacture or procurement of 42,000 non-metallic hose assemblies meeting NSN 4720014699259 specifications for the DLA Weapons Support Fluid Handling Division. The selected provider must ensure all units are packaged according to RP001 standards and that hazardous materials are labeled in compliance with 29 CFR 1910.1200. Key operational requirements include maintaining CMMC Level 2 certification and coordinating First Destination Transportation. The work will be performed in New Cumberland, Pennsylvania, under NAICS code 322220, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Portable Collapsible Literature Rack SupplierThis subcontract agreement establishes a supplier for portable, foldable aluminum magazine racks to support prime contractors working on projects for the Citizens Police Oversight Commission in Philadelphia. The required equipment consists of collapsible literature racks featuring six pockets designed for 8.5 by 11 inch paper, a total height of 59 inches, and a compatible carrying bag. All supplied materials must meet or exceed the specified quality and performance standards. The opportunity was posted on October 19, 2026, with a response deadline of November 4, 2026. Falling under NAICS code 322220, the contract focuses on the delivery of these specialized storage solutions to ensure efficient literature distribution for agency operations.

Citizens Police Oversight Commission (cpoc)

POSTED

DEADLINE

Supply of MIL-SPEC Waterproof/Greaseproof PackagingThis subcontract opportunity is for the supply of specialized packaging materials to support prime contractors working on DLA Weapons Support Land Supply Chain projects. The scope of work involves the bulk delivery of medium duty, waterproof, greaseproof, and opaque bags that strictly adhere to MIL-DTL-117, Type II, Class C, Style 1 specifications. Additionally, the provider must supply palletization materials in accordance with RP001 and ensure all packaging data complies with MIL-STD-2073-1E. Managed by the Department of Defense, this requirement is designated as a Total Small Business Set-Aside under NAICS code 322220. Interested parties must submit their responses by October 30, 2026. The contract focuses on maintaining rigorous military specifications to ensure the protection and preservation of land supply chain assets.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

13 days ago

DEADLINE

in 2 days

AI Contract Overview

The contract seeks the supply of custom printable paper and pre-cut envelopes designed specifically for secure image seal mailers, featuring tamper-evident or pressure-sensitive sealing mechanisms to ensure integrity and security during transit. These materials must meet precise technical specifications to enable reliable sealing and visual verification of unauthorized access, making them suitable for sensitive document handling. The work is classified under NAICS code 322220, which pertains to paper product manufacturing, indicating a focus on specialized paper goods rather than standard commercial printing. This subcontract opportunity was posted on July 16, 2026, with a tight response deadline of July 17, 2026, requiring immediate submission from qualified vendors. The contracting entity is DTMB, specifically under the Michigan agency, though no additional location or point of contact details are provided. The procurement does not specify a set-aside classification, suggesting it is open to any eligible subcontractor regardless of size or demographic status. All performance and delivery must align with the secure mailer requirements, and interested parties must access the opportunity through the provided Michigan government portal to submit proposals before the short window closes.