Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on March 20, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Spindle Drive Overhaul

Awarded
N64498-19-Q-5065Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and submission portals through the official WMATA supplier link.
Washington Metropolitan Area Transit Authority

POSTED

about 4 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, tools, and new manufacturer-specified parts to diagnose and repair the clutch assembly and power take-off (PTO) system. Key technical requirements include disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as necessary. The project is complete once the Facility Maintenance Department verifies proper clutch engagement and PTO operation under load. This is a small business set-aside opportunity under NAICS code 811310, open to various SBA-certified categories including VOSB, SDVOSB, WOSB, and HUBZone businesses. Proposals must be submitted via email to Angie Mahoney by November 3, 2026, and must include a lump sum bid sheet, a completed supplier packet with a W-9 and self-certification form, and proof of insurance. Award will be based on best value, considering the contractor's qualifications, experience, and the itemized cost breakdown. The contract is subject to Federal Acquisition Regulation (FAR) clauses regarding the Buy American Act, combating trafficking in persons, and Service Contract Labor Standards per Wage Determination No. 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
**Certified SB/DVBE Only** IFPQ Boiler Inspection, Maintenance, Repair, Testing, and Reporting in Los Angeles County
Solicitation # 07A6539
The California Department of Transportation (Caltrans) is soliciting price quotes for an Invitation for Price Quote (IFPQ 07A6539) to provide comprehensive boiler inspection, maintenance, repair, testing, and reporting services at the District 7 Office facility in Los Angeles, California. The scope of work includes annual and quarterly preventative maintenance for three Unilux water tube boilers and six boiler pumps, ensuring compliance with manufacturer standards, ASME Code, OSHA requirements, and South Coast Air Quality Management District standards. This is a set-aside solicitation exclusively for certified Small Business (SB), Microbusiness (MB), or Disabled Veteran Business Enterprise (DVBE) entities. The contract will be awarded to the responsible bidder offering the lowest price quote who meets all specifications. Key operational requirements include a 48-hour response time for routine service requests and a strict prohibition on subcontracting any portion of the work. The contractor must adhere to State General Prevailing Wage Rates for Los Angeles County and provide a payment bond for any service request exceeding 25,000 dollars. Required submission documents include a Price Quote Proposal, Bidder Certification Sheet, Non-Collusion Declaration, and certifications for California Civil Rights Laws and the Darfur Contracting Act. Invoicing is conducted monthly in arrears and must be accompanied by certified payroll records and DVBE utilization reports. The agreement is subject to a budget contingency clause, meaning it is enforceable only if sufficient funds are provided by the California State Legislature or the United States Government.
California Department of Transportation

POSTED

about 5 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
Wheelchair Lift and Accessibility EquipmentThis subcontract focuses on the maintenance and repair of specialized accessibility equipment for special needs bus projects managed by the Clayton County Board of Education in Georgia. The scope of work involves the inspection, repair, and certification of wheelchair lift systems, specifically targeting hydraulic lift components and safety sensors to ensure all equipment is operational and safe. To qualify for this engagement, providers must hold OEM Industry Certification and strictly adhere to ADA compliance standards. The project is categorized under NAICS code 811310, with a response deadline set for December 3, 2026.
Clayton County Board of Education

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Extended Warranty Package Provision
Philadelphia Gas Works

POSTED

about 8 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
International
Chlorine Evaporator Maintenance and Inspection ServicesThis subcontract opportunity with the Ontario Clean Water Agency involves providing annual maintenance and detailed technical inspections of chlorine evaporators and related chlorinator services. The selected supplier will be responsible for utilizing specialized equipment to service evaporator units and must possess qualified status for the handling of hazardous materials. All work must culminate in the delivery of comprehensive annual maintenance and inspection reports. The project is based in Canada and falls under NAICS code 811310. Interested parties must submit their responses by the deadline of November 27, 2026. This contract is designed for suppliers capable of supporting prime contractors on OCWA projects through specialized technical expertise in chlorination systems.
Ontario Clean Water Agency

POSTED

about 9 hours ago

DEADLINE

in 29 days
NAICS: 811310
New
SLED
Air Compressor Preventive and Corrective Maintenance
City of Roseville

POSTED

about 10 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
RFP 07-135 Roseville Electric Utility – Air Compressor Maintenance
Solicitation # 07-135
The City of Roseville is soliciting proposals under RFP 07-135 for a consultant to provide comprehensive scheduled preventive and corrective maintenance for air compressors and auxiliary systems, including Ingersoll Rand equipment. The services will be performed at the Roseville Energy Park and Sunset Energy Center in California. The selected consultant will be responsible for providing all necessary labor, technical expertise, specialized tooling, and materials. This is a prevailing wage project with an initial contract duration of five years, estimated to commence in April or May. Proposals must be submitted by December 16, 2026, via email to the City Clerk or through physical delivery in a sealed container with the required Attachment H label. The award will be based on a formal evaluation panel process considering the firm's experience and qualifications (25 points), the proposed project plan (35 points), and cost (40 points), with potential interviews for top candidates. Requirements for the successful bidder include obtaining a City of Roseville business license, providing 100% faithful performance and labor and materials bonds, and maintaining specific insurance policies. Consultants must also disclose any conflicts of interest and adhere to the Levine Act regarding political contributions.
City of Roseville

POSTED

about 10 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Specialized Heat Exchanger Maintenance (Preventive & Corrective)
City of Roseville

POSTED

about 10 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Compressor Auxiliary Systems Maintenance
City of Roseville

POSTED

about 10 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Gas Packager Compressor Maintenance Services
City of Roseville

POSTED

about 10 hours ago

DEADLINE

in about 2 months
NAICS: 811310
New
SLED
Ariel Gas Compressor Maintenance Services
City of Roseville

POSTED

about 10 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

Contract award N6449819P5082, issued on March 20, 2019, by the Naval Surface Warfare Center Philadelphia Division of the Department of Defense, designates Fives Line Machines Inc. for a spindle drive overhaul project. The contract is valued at 137,098.00 dollars and falls under NAICS code 811310. The scope of work specifically covers the replacement of a spindle drive, the installation of a high-speed spindle, and various additional repairs intended for the Naval Foundry and Propeller Center. This procurement was managed by Contract Specialist James T. O'Sullivan and is associated with solicitation N64498-19-Q-5065, including Amendment 0001. The agreement includes a detailed schedule of supplies and services and a formal Statement of Work to guide the execution of the technical requirements.

General Info

Agency

Department Of Defense → Nswc Philadelphia Division

Contract Value

$137,098

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

PA, USA

Set-Aside

NONE

Awardee

FIVES LINE MACHINES INC

Award Issued Date

Documents

1

N6449819P5082 - Spindle Drive Replacement and Installation

PDF, High priority: read this firstaward
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Presolicitation

Type Changed

Presolicitation → Combined Synopsis

Notice updated

Response deadline changed from Feb 20, 2019 to Mar 8, 2019. The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Nswc Philadelphia Division
Contacts1 person available
OfficePHILADELPHIA, PA, 19112-1403, USA
Organization / AgencyDepartment Of Defense → Nswc Philadelphia Division
Office AddressPHILADELPHIA, PA, 19112-1403, USA
Contacts
James T. O'SullivanContract Specialist
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Amendment 0001 to solicitation N64498-19-Q-5065.

More opportunities from Department Of Defense → Nswc Philadelphia Division

Same awarding agency

NAICS: 331110
New
Federal
ERCuNiAl TIG Welding Wire SupplierThis small business set-aside subcontract through the Department of Defense and the NSWC Philadelphia Division involves the supply of ERCuNiAl TIG welding wires for prime contractors working on NAVSEA Naval Foundry and Propeller Center projects. The supplier is responsible for manufacturing and sourcing copper-nickel-aluminum alloy wire in 3/32 inch by 36 inch and 1/8 inch by 36 inch sizes, ensuring strict adherence to MIL-E-23765/3A specifications. The scope of work requires the delivery of 80 containers of MIL-SPEC welding wire along with comprehensive technical compliance documentation. Deliverables include Level C packaging and a full Certification Package as mandated by CDRL/DD Form 1423. The contract falls under NAICS code 331110 and is to be performed in the 19112 zip code area.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 333992
New
Federal
ERCuNiAl TIG Wire
Solicitation # N6449827Q0003
Solicitation N6449827Q0003 is a total small business set-aside for the Naval Surface Warfare Center Philadelphia Division to provide ERCuNiAl TIG wires to the Naval Foundry and Propeller Center. This firm-fixed price contract requires the delivery of 40 containers of 3/32 inch by 36 inch wire and 40 containers of 1/8 inch by 36 inch wire, both meeting MIL-E-23765/3A specifications with a length tolerance of 36 inches plus 0 to 1/2 inch. All items must be delivered to the destination in Philadelphia, Pennsylvania, on or before November 30, 2026. The contractor must adhere to Level C packaging standards and provide a certification package for each lot of wire per MIL-E-23765B, including chemical, mechanical, and non-destructive testing results. Award will be made to a single offeror based on technical acceptability and the ability to furnish all units of all items. Compliance requirements include SAM registration, CMMC cybersecurity standards, and adherence to the Buy American-Free Trade Agreements-Israeli Trade Act. Invoicing is to be processed electronically via Wide Area WorkFlow. Access to the facility for delivery requires five working days notice, valid vehicle registration and insurance, and two forms of government-issued identification.
Welding and Soldering Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541330
New
Federal
Amphibious/CVN Engineering and Ship Control Systems
Solicitation # N6449827R3103
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
Programmable Logic Controller (PLC) Parts
Solicitation # 26-SIMACQ-PD-51-0189
Engineering Services

POSTED

about 14 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334513
New
Federal
512_LCS DAU Panels IDIQ_FY27
Solicitation # N6449826R0542
Solicitation N6449826R0542 is a Firm Fixed Price Indefinite Delivery/Indefinite Quantity (IDIQ) contract issued by the Naval Surface Warfare Center Philadelphia Division for the production of Data Acquisition Units (DAU) supporting the LCS Independence Advanced Engineering Control System. The contract features a five-year ordering period with an estimated total value of 50 million dollars and a minimum order of 500 dollars. The scope includes the production and delivery of shipboard DAUs, requiring strict adherence to military standards for shock tests, mechanical vibrations, electromagnetic interference, and environmental engineering. Award selection is based on a subjective tradeoff process prioritizing technical capabilities, past performance, and total evaluated price, with a mandatory acceptable rating for small business participation. Contractors must implement a comprehensive quality management system adhering to ISO 9001:2015 and provide numerous deliverables, including acceptance test plans, reports, certificates of compliance, and technical data packages. Rigorous packaging and marking requirements are mandated per ASTM-D-3951-18 and MIL-STD-2073-1 to ensure equipment protection during transit to the Philadelphia destination. Administrative requirements include electronic invoicing via Wide Area Workflow and mandatory security training for personnel. The solicitation has undergone amendments to extend the response deadline to November 13, 2026, and requires proposals to be submitted in five specific volumes via the PIEE Solicitation Module and SAM.gov.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 14 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335999
New
Federal
Electrical Enclosure & Control System FabricationThis subcontract for Electrical Enclosure and Control System Fabrication supports the Naval Surface Warfare Center, Philadelphia Division. The scope of work involves the manufacture of specialized electrical enclosures and control valve assemblies for prime contractors, specifically fabricating MKIII REE, SEE, Mini-AU, AU, and various cooling, cleaning, and pulper control valves according to NAVSEA specifications. Performance of the contract takes place in Philadelphia. To ensure quality and security, the contractor must maintain ISO 9001:2015 certification and comply with NIST SP-800-171 and DFARS 252.246-7007 standards for supply chain traceability. The project falls under NAICS code 335999 and requires the final delivery of completed enclosures and valve assemblies.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333999
New
Federal
Solid Waste Shredder FabricationThis subcontract for Solid Waste Shredder Fabrication involves the production and testing of Mod I Metal and Glass Shredders as well as Mod I Plastics Waste Shredders. Working for prime contractors on projects for the Naval Surface Warfare Center, Philadelphia Division, the selected provider must manufacture units according to NAVSEA drawings of record for Top Level Assembly and Interface. The final deliverable consists of fully completed and tested shredder units. The project is managed under the Department of Defense and requires strict adherence to ISO 9001:2015 and NIST SP-800-171 compliance standards. Performance will take place in Philadelphia, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, for this effort categorized under NAICS code 333999.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333999
New
Federal
Pulper System Fabrication (Large & Small)This subcontract involves the fabrication and testing of Mod I Large and Small Pulper systems for prime contractors supporting the Naval Surface Warfare Center, Philadelphia Division. The selected provider is responsible for manufacturing these systems in strict accordance with NAVSEA drawings and conducting all necessary testing based on specified interface drawings to ensure full operational functionality before delivery. The project is managed under the Department of Defense and requires the contractor to maintain ISO 9001:2015 and NIST SP-800-171 compliance. Performance will take place in Philadelphia, with the primary objective being the delivery of completed and verified Pulper systems that meet all technical and security standards.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 333999
New
Federal
Plastics Waste Processing Equipment (PWP) FabricationThis subcontract involves the fabrication, production, and testing of Mod I and Mod II Plastics Waste Processors and Mod I CMU Assemblies for the Naval Surface Warfare Center, Philadelphia Division. The selected contractor is responsible for manufacturing equipment according to NAVSEA drawings of record and conducting rigorous testing as specified in the statement of work attachments to ensure the delivery of fully completed and tested units. Performance of this contract requires strict adherence to quality and security standards, including ISO 9001:2015, NIST SP-800-171, and DFARS 252.246-7007 compliance. The work will be performed in Philadelphia, Pennsylvania, under NAICS code 333999, supporting Department of Defense initiatives.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
Federal
Marine Electrical Installation & IntegrationThe Marine Electrical Installation and Integration subcontract involves the installation and integration of electronic and electrical systems for prime contractors supporting the Naval Surface Warfare Center Philadelphia Division. The scope of work covers both shipboard and shore-based platforms, with specific requirements for system integration, installation support, bonding and grounding verification, and the delivery of insulation resistance reporting. To execute this contract, the provider must utilize specialized electrical testing equipment and bonding and grounding tools. Personnel are required to hold Secret security clearances, OSHA 10-hour Maritime Shipyard certifications, and Electrical WAF/tag-out training. The final deliverables consist of fully certified systems and comprehensive insulation resistance reports.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423510
New
Federal
Specialized Marine Material Supply (Level I)This subcontract for Specialized Marine Material Supply (Level I) involves the procurement and delivery of high-criticality Level I materials, components, and raw stock, including aluminum, steel, and piping, for prime contractors working on Naval Surface Warfare Center Philadelphia Division vessels. The contractor is responsible for ensuring all supplied materials meet strict NAVSEA Level I quality standards and are delivered with full traceability and comprehensive inspection records. Key compliance requirements for this contract include the implementation of a NAVSEA Level I compliant program, the provision of Dimensional Inspection Records, and Mercury Free Certification. Operating under NAICS code 423510, the provider must guarantee that all materials are certified and meet the rigorous technical specifications required by the Department of Defense.
Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 541330
New
Federal
Marine CAD Design & Engineering ServicesThe Marine CAD Design and Engineering Services subcontract supports prime contractors on shipboard modifications for the Naval Surface Warfare Center Philadelphia Division. The scope of work includes design development, prototype engineering, technology insertion planning, and the creation of technical documentation and Integrated Logistics Support materials using marine-grade CAD software. To ensure compliance and security, the contractor must maintain ISO-9001 Quality Systems and hold a Secret clearance for handling classified designs. Key deliverables for this effort consist of technical drawings, prototype designs, and comprehensive ILS documentation under NAICS code 541330.
Engineering Services

POSTED

1 day ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
Preventive and Corrective Maintenance and Repair to Government-Owned Water Chillers
Solicitation # N4523A18R0213
Puget Sound Naval Shipyard IMF

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Closed
Federal
Baffles
Solicitation # N3904019QBaffles
Portsmouth Naval Shipyard Gf

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
seal assy shaft
Solicitation # 70z08019-q-af130
Sflc Procurement Branch 3(00040)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Federal
J--CARTRIDGE ASSEMBLY, IN REPAIR/MODIFICATION OF
Solicitation # N0010419PNC74
Navsup Weapon Systems Support Mech

POSTED

over 7 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Awarded
Federal
Graham Burke Engine Surveying
Solicitation # W912EQ19T0011
W07V Endist Memphis

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Federal
J--Annual Emergency Generator Maintenance
Solicitation # 36C25219Q0440
252-NETWORK Contract Office 12 (36C252)

POSTED

over 7 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Awarded
Federal
Spare Engine Overhaul
Solicitation # N32253-19-Q-0034
Pearl Harbor Naval Shipyard IMF

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
PEDESTAL PILLOW BLOCK
Solicitation # 70Z08519Q40175B00
Sflc Procurement Branch 3(00040)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Closed
Federal
WOOD GROUP PRATT & WHITNEY: FT4A Marine Gas Turbines Overhauls
Solicitation # 70Z08519S31931B00
Sflc Procurement Branch 3(00040)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Closed
Federal
Repair by Replacement Oily Water System, USCG Air Station San Francisco
Solicitation # 70Z0319QPQQ103
Base ALAMEDA(00031)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
ROLLER BEARING UNIT
Solicitation # 70Z08519Q40174B00
Sflc Procurement Branch 3(00040)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details
NAICS: 811310
Awarded
Federal
FLUID COOLER
Solicitation # 70Z08519Q40173B00
Sflc Procurement Branch 3(00040)

POSTED

over 7 years ago

CLOSED

over 7 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS