This Solicitation opportunity from Government of Canada was posted on March 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Standby Generator Services

Closed

BCRFP_2026-03International

Submission Closed03/31/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

1089 – Cafeteria freezer #1 & Cooler #4 Replacement

Solicitation # 26-137

This subcontracting opportunity for the Atterbury Job Corps Center in Edinburgh, Indiana, involves the full removal and replacement of Cafeteria Freezer #1 and Cooler #4. Freezer #1 requires replacement due to significant frame and door damage causing freeze-ups, while Cooler #4 must be replaced due to an inoperable unit, drainage backups, and a sagging ceiling. Additionally, the project includes correcting the exit door of the main Electrical Room to ensure compliance with NEC 2020 110.26.C (3) by installing panic hardware and ensuring the door opens toward the egress. The project is a single lump sum contract and is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must attend a mandatory site visit on September 3, 2026, and submit proposals by September 11, 2026. Award decisions will be based on best value rather than the lowest price. Requirements include a valid Indiana Contractor's License, compliance with the Davis-Bacon Act (WD # IN20260002), and adherence to EPA and OSHA regulations. Contractors must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. Deliverables include all necessary training, operating manuals, and keys, with a one-year guarantee of workmanship and manufacturer warranties. Proposals must include a detailed cost breakdown, a 90-day bid guarantee, and proof of specific automobile liability and workers' compensation insurance naming Adams & Associates, Inc. as an additional insured.

Adams & Associates, Inc.

POSTED

DEADLINE

Replace Ice-machine in café

Solicitation # 26-138

Adams & Associates, Inc. is soliciting a single lump sum contract for the full removal and replacement of a non-functional ice maker located in the cafeteria at the Atterbury Job Corps Center in Edinburgh, Indiana. The existing unit requires replacement due to a failed evaporator coil and other internal component failures. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. To be eligible for consideration, vendors must attend the mandatory site visit on September 3, 2026, at 3:00 PM, with final proposals due by September 11, 2026, at 3:00 PM. Award will be based on best value rather than the lowest price. Qualified contractors must hold a valid Indiana state contractor's license and provide proof of automobile liability and workers' compensation insurance, naming Adams and Associates, Inc. as an additional insured. The scope of work requires compliance with EPA and OSHA regulations, as well as Davis Bacon Act wage determinations. Deliverables include a sequenced construction schedule within 10 days of the Notice to Proceed, a one-year workmanship guarantee, and all relevant manufacturer warranties and maintenance manuals. Final payment is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of liens from all subcontractors.

Adams & Associates, Inc.

POSTED

DEADLINE

Preventive Maintenance & Emergency Repair Services

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Vehicle Management & Maintenance

POSTED

DEADLINE

EDG Maintenance & Technical Support (On-Call)

Puget Sound Naval Shipyard IMF

POSTED

DEADLINE

Fuel Tank Inspection, Test and Maintenance Service at Osan AB, Korea

Solicitation # W90VN626QA018

The Department of Defense is seeking a contractor to provide fuel tank inspection, test, and maintenance services at Osan Air Base in Korea. This solicitation, identified by number W90VN626QA018, falls under NAICS code 811310 and is being managed by the 0906 Aq Co Contracting Battalion. The solicitation was posted on September 3, 2026, with a response deadline of October 7, 2026. Interested parties should coordinate with the primary point of contact, Ik Chung Om, or the secondary contact, Nancy Segarra, for further details regarding the submission process.

0906 Aq Co Contracting Bat

POSTED

DEADLINE

Water Tanker/Pump Repair

Solicitation # FA930126Q0030

Solicitation FA930126Q0030 is a small business set-aside request for quote for the repair and replacement of a structurally degraded agent water tank assembly and associated components on a 2011 International 7400 Fire Department Water Tender (registration 11L00144). The vehicle, which features a 4,000-gallon Pro-Poly America tank, has suffered from leaks and structural sagging. The scope of work includes the complete removal of the failing assembly, installation of a new tank capable of supporting maximum load without bowing, system integration of all plumbing and valves, and full exterior restoration including specialized painting and coating to match Fire Department specifications. All work must be performed at the contractor's facility and must meet or exceed KME manufacturer specifications as well as NFPA 1901, NFPA 1911, ASTM D1998, and OSHA 29 CFR 1910 standards. The government will award the contract based on a comparative evaluation of technical capability, past performance, price, delivery, and warranty to determine the best overall value. Vendors must demonstrate proven experience servicing KME fire apparatus and possess the necessary tooling and diagnostic capabilities. The estimated period of performance is 240 days after receipt of order. Quote submissions are due by September 8, 2026, at 4:00 PM PST, though this deadline may be moved up to September 4 if no site visits are requested by August 24. All submitted quotes must remain valid for at least 30 days.

POSTED

DEADLINE

Kolene Salt Bath PM & ER

Solicitation # W911KF26QA058

The Kolene Salt Bath PM and ER contract, identified by solicitation number W911KF26QA058, is a presolicitation opportunity issued by the Department of Defense through the W6QK Acc Anad agency. The project focuses on the cleaning and maintenance of Kolene molten salt baths and is located in Anniston, Alabama. This opportunity is designated as a total small business set-aside under NAICS code 811310. Interested parties must submit their responses by the deadline of September 24, 2026. The primary point of contact for this requirement is Zena Johnson, with Heather Robinson serving as the secondary contact. All performance activities will take place at the specified facility in Anniston, Alabama.

POSTED

DEADLINE

J--Transformer Refurbishment

Solicitation # 89503326QWA000417

The Western Area Power Administration, under the Department of Energy's Western-Sierra Nevada Region, is seeking proposals for the refurbishment of the Corning KY3A Transformer. This solicitation, identified by number 89503326QWA000417, falls under NAICS code 811310 and is managed from the office located in Folsom, California. The primary objective of this notice is to extend the RFQ close date to September 14, 2026, at 10:00 PD. Interested parties must submit their responses by the final deadline of September 14, 2026, at 17:00. Andrew Mika serves as the primary point of contact for this procurement process.

Western-Sierra Nevada Region

POSTED

DEADLINE

Sources Sought - Cart Washer Maintenance Services for the Minneapolis VA Medical Center

Solicitation # 36C26327Q0016

The Department of Veterans Affairs, through Network Contract Office 23, is conducting market research via a sources sought notice for cart washer maintenance services at the Minneapolis VA Medical Center. This effort, identified by solicitation number 36C26327Q0016, seeks to identify capable service providers under NAICS code 811310 to perform maintenance as detailed in the provided Statement of Work. The opportunity is open for responses until September 16, 2026, and there is currently no specific set-aside designated for this requirement. Interested parties should direct inquiries to the primary point of contact, Alisha Milander, regarding the performance of these services in Minneapolis, Minnesota.

Network Contract Office 23 (36C263)

POSTED

DEADLINE

C-5 Aileron Spoiler Mixer Tension Regulator

Solicitation # 28-00018

This sources-sought notice, solicitation number 28-00018, concerns the repair and maintenance of the C-5 Aileron Spoiler Mixer Tension Regulator. The Department of Defense, specifically the AFSC PZAAB office at Robins AFB, Georgia, is seeking qualified sources capable of performing these repairs. Due to the specialized nature of the part, engineering source approval by the design control activity is mandatory to ensure quality standards are met. The requirement emphasizes that the approved sources possess unique engineering skills and technical data that are not economically available to the government. Any alternate source wishing to perform this work must qualify according to the procedures of the design control activity and receive approval from the AFLCMC/WLSEAB C-5 Galaxy Division. Responses are due by October 1, 2026.

POSTED

DEADLINE

PKB 90 MXG Air Compressor Audit

Solicitation # FA461326Q1054

The Department of the Air Force, through the 90th Contracting Squadron at F.E. Warren AFB, Wyoming, is seeking qualified small businesses to perform an audit of existing air compressor systems and associated lines to support a planned transition from 135 PSI to 200 PSI. This pre-solicitation notice initiates a Total Small Business Set-Aside under NAICS code 811310 with a $12.5 million size standard, and the contract is expected to be awarded as a Firm-Fixed-Price agreement using the Lowest-Price Technically Acceptable methodology. The audit must result in a comprehensive report identifying findings relevant to upgrades or replacements, with delivery required within 21 calendar days of contract award. All offerors must be registered in SAM.gov and comply with CMMC Level 1 requirements, submitting their Unique Identifier to verify compliance. The evaluation process will prioritize the three lowest-priced quotes if three or more are received, and the government reserves the right to award without discussions. Vendors must adhere to applicable ASME Code and OSHA standards, and proposals must include a valid quote demonstrating technical capability. The solicitation window opens with this notice and closes on July 30, 2026, with award anticipated in July 2026. Only small businesses are eligible to compete as this is a total set-aside, and no discussions will be held unless deemed necessary by the Government. Primary contact for questions is 1st Lt Shane Yurkus, with Donna Doss as the contracting officer. Prospective bidders are encouraged to review the Statement of Work and ensure full compliance with all technical, regulatory, and cybersecurity requirements prior to submission.

FA4613 90 Cons Pk

POSTED

about 11 hours ago

DEADLINE

in 9 days

AI Contract Overview

The City of Port Coquitlam is seeking proposals for Standby Generator Services through a formal solicitation process managed on the Bids&Tenders platform. Interested parties must register and submit all enquiries exclusively through this system, ensuring that communication remains centralized and secure. The City emphasizes that clarification or amendments to the request for proposals will be issued solely through written addenda posted on the Bids&Tenders site, which bidders must review and acknowledge as part of their submission. No questions should be posted on external forums such as the BC Bid site. The solicitation, identified as BCRFP_2026-03, was posted on March 10, 2026, and proposals are due by March 31, 2026, at 10:00 PM. The contracting authority can be contacted via the provided email for further assistance. The City is operating under federal jurisdiction with the Government of Canada as the overseeing agency. All updates, including any changes to bid closing dates, will be transparently communicated through the official bidding system to ensure fairness and clarity throughout the procurement process.

General Info

City of Port Coquitlam seeks standby generator proposals via Bids&Tenders, due March 31, 2026.

Agency

Government of Canada → City of Port Coquitlam

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMar 10

Solicitation

Response DeadlineMar 31

Deadline has passed

Submission Closed

03/31/2026, 10:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → City of Port Coquitlam

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → City of Port Coquitlam

Office AddressN/A

Contacts

Contracting Authority

contact@example.gov

Full Description

The City utilizes Bids&Tenders as the Bidding System for this RFP. To view and register for the opportunity, visit https://portcoquitlam.bidsandtenders.ca/ Enquiries:All enquiries related to this RFP are to be submitted through the Bids&Tenders Bidding System only: https://portcoquitlam.bidsandtenders.ca/ by clicking on the “Submit a Question” button for this specific bid opportunity. Bidders should not use the Discussion forum on the BC Bid site to submit questions.Addenda:Written addenda are the only means of verifying, clarifying, or otherwise changing any of the information contained in this RFP. The City will post addenda on the Bidding System. Once issued, all addenda will form part of the RFP. It is the Bidder's responsibility to ensure they have viewed all addenda prior to submission. Bidders will be required to acknowledge receipt of all addenda in their Bid submission.Any amendments to a bid closing date are captured by way of Addenda, and updated only on the Bids&Tenders bidding sit

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS