Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Steam Pipe Leak Repair and Maintenance

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Steam Pipe Leak Repair and Maintenance involves providing emergency repair services for steam supply systems at State University of New York Maritime facility projects. The selected contractor will be responsible for identifying and localizing leaks, performing cutting, fitting, and welding of steam-rated piping, and installing necessary leak seals, clamps, or replacement sections. To ensure the integrity of the work, the contractor must conduct pressure testing on all repaired sections to deliver a fully functional, leak-free system. Eligible bidders must be licensed Plumbing or Mechanical Contractors and employ certified welders to meet the technical requirements of the project. The work falls under NAICS code 238220 and is intended for prime contractors operating within the SUNY system.

General Info

Subcontract for emergency steam pipe leak repair and maintenance at SUNY Maritime facility.

Agency

State University of New York (SUNY)

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

NY, USA

Set-Aside

NONE

Documents

This scope was carved out of 2140466.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Emergency leak repair on steam supply system

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyState University of New York (SUNY)

ContactsNo contacts available

OfficeN/A

Organization / AgencyState University of New York (SUNY)

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs emergency leak repairs on steam supply systems for prime contractors on SUNY Maritime facility projects. Identifies and localizes leaks, cuts, fits, and welds steam-rated piping, and installs leak seals, clamps, or replacement pipe sections. Performs pressure testing of repaired sections. Requires licensed Plumbing or Mechanical Contractor and certified welders. Delivers a fully repaired, leak-free steam supply system.

Similar Contracts

Same NAICS industry code

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. The project also requires the installation of a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220, and inquiries can be directed to the primary point of contact, Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract under solicitation CBP#9772 to provide comprehensive HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work involves the cleaning of twelve AHUs and twenty-eight heating and cooling coils serving the Kilmer and Edison dormitories, as well as the cleaning of supply, return, and outside-air ductwork and associated air distribution components. The contractor is responsible for all labor, equipment, containment, waste handling, and the installation of necessary access panels. The estimated contract value ranges from $100,000 to $250,000, with a performance period of 90 consecutive business days following a written Notice to Proceed. Bids are due by November 17, 2026, and will be evaluated based on overall best value. Mandatory requirements for consideration include a physical site visit, a completed pricing schedule, and a bid bond guarantee of 20% for bids exceeding $25,000. Awarded contractors with bids over $25,000 must also provide performance and payment bonds from a surety with at least an A- rating. Compliance with Davis-Bacon prevailing wage determinations for Middlesex County is required. Additionally, subcontractors must provide a Unique Entity Identifier (UEI) and self-certify their business size and socioeconomic status per FAR 52.219-8, while first-tier subcontractors exceeding $45,000 must disclose debarment status per FAR 52.209-6. Final acceptance is contingent upon a Center inspection and the submission of all required operational documentation and warranties.

Edison Job Corps

POSTED

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the ED1 Building of the Sierra Nevada Job Corps Center in Reno, Nevada. The project scope is divided into four phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, and system testing and commissioning. The estimated price range for the project is between 0 and 25,000 dollars. Bids must be submitted using the MTC Bid for Lump Sum Contract form and include a detailed cost breakout on the bidder's letterhead. The deadline for submission is November 17, 2026, by 3:00 PM PST. Award will be based on overall best value, and a physical site visit is mandatory prior to bidding. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid, as well as performance and payment bonds from a surety with at least an A- rating, are required. Contractors must comply with EPA Section 608 regulations for refrigerant recovery and adhere to the specified wage determinations for Washoe County, Nevada. Required insurance includes general liability with a minimum limit of 1,000,000 dollars and worker's compensation with employer's liability limits of at least 500,000 dollars. Final payment is contingent upon a successful final inspection, submission of two sets of operation and maintenance manuals, and the provision of certified payroll reports and lien releases.

Sierra Nevada Job Corps Center

POSTED

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

Education and Training Resources is seeking quotes for a turnkey subcontracting project to replace multiple HVAC systems at the Montgomery Job Corps Center in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of eight new units across Buildings A, B, E, F, and G, with capacities ranging from 3.5 to 10 tons. Technical specifications require Energy Star systems, minimum EER ratings of 16 for certain units, 90 percent efficiency furnaces, and the use of R-454B refrigerant. All work must comply with the National Electrical Code, NFPA Standard No. 101, and OSHA regulations. The project requires a 5 to 10 year warranty on parts and a 2 year warranty on workmanship, with final payment contingent upon a signed punch list and performance verification via testing and balancing services. This is a small business set-aside opportunity open to VOSB, SDVOSB, WOSB, and HUBZone certified entities. Interested bidders must provide a current SAM.gov UEI number, active registration, Alabama business licenses, a W-9, and an FFATA form. Submissions must include a completed bid sheet with a detailed cost breakdown, a proposed performance schedule, and certificates of insurance. The Davis-Bacon Act applies, requiring prevailing wages and certified payroll. Bonding requirements are tiered based on project value, requiring a 100 percent payment bond for projects over 35,000 dollars and both performance and payment bonds for projects exceeding 150,000 dollars. Bids are due by November 27, 2026, at 12:00 PM CST.

Montgomery Job Corps Center

POSTED

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This contract involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the provision of electrical power, control interface connections, chilled water piping, and the final start-up of the equipment. The estimated magnitude of construction for this project is valued between 250,000 and 500,000 dollars, with primary NAICS codes including 238210, 238220, and 238290. Managed by PTSI Managed Services Inc., this solicitation is set aside for various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of November 18, 2026. Denise Buergey serves as the primary point of contact for this procurement effort.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project focuses on eliminating severe piping leaks and preventing air compressor short-cycling within Building CM (Men's Dormitory), Building CW (Women's Dormitory), and Building D (Recreation). The scope of work includes the demolition and legal disposal of existing failing compressors and distribution piping, the installation of a new code-approved piping network and properly sized air compressor, and comprehensive operational and leak testing. All work must adhere to NFPA 25 (2023 Edition) and other local, state, and national codes. The awarded contractor must complete all services within 30 consecutive business days following the written Notice to Proceed. Bids are due by December 1, 2026, and must be submitted via email. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. Evaluation is based on overall best value and bidder responsiveness. The contract is subject to prevailing wage requirements per the Davis-Bacon Act and various Federal Acquisition Regulation clauses, including those regarding whistleblower rights, security requirements, and debarment disclosures for first-tier subcontractors exceeding $45,000. Final payment is contingent upon the submission of certified payroll reports, a notice of final completion, and the delivery of operation and maintenance manuals.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four existing 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications using ProPress materials, electrical disconnections and reconnections, insulation, rigging, and the provision of temporary hot water arrangements to ensure the center remains operational. The estimated on-site construction duration is between two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State statutory insurance requirements, Davis-Bacon prevailing wage determinations, and strict center security and safety protocols, including a prohibition on fraternization with students. Required submission documents include a completed vendor questionnaire with UEI and NAICS code, a current W-9, New York State licenses, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the replacement of twenty failed ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building in New Mexico. The scope of work includes the removal of damaged units and the installation of Bosch 1-ton units, model RL012-HZC-LLEPAA-GGXXXWX7XXX1XXXXSBA or an equivalent. Additionally, the contractor must install smoke dampers with fusible links in all vents leading into the plenum and ensure all installed plenum materials are plenum rated. All work must comply with NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. The project is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission and approval of weekly certified payroll reports prior to invoice payment. Proposals exceeding $100,000.00 require 100% payment and performance bonding upon award. Submissions must include a safety and compliance plan, a detailed cost breakdown for labor and materials, equipment cut sheets, warranty information, and a proposed payment schedule. Proposals are due by November 7, 2026.

Career Systems Development Corporation

POSTED

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the integration of new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and possess an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 6, 2026.

Exeter Job Corps

POSTED

DEADLINE

WOJC – Buried Domestic Hot Water (DHW) Pipe Repair

Solicitation # wojc-buried-domestic-hot-water-dhw-pipe-repair-0

Education & Training Resources is seeking quotes for a subcontracting opportunity to repair buried domestic hot water piping at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work requires the contractor to provide all labor, materials, and equipment to excavate, remove, and repair compromised piping at two specific locations: behind Singletary Hall and on the east side of Harris Hall. Key technical requirements include digging trenches approximately 15 linear feet long and 8 feet deep, performing pipe repairs up to 4 inches in diameter, providing insulation, and backfilling the trenches. The project requires a one-year equipment and workmanship warranty, and final payment is contingent upon a signed punch list and project closeout. Interested bidders must submit their proposals by November 6, 2026, to Garrett Owens. A complete submission must include a detailed bid sheet with a cost breakdown, a proposed service schedule, Massachusetts licensing, certificates of insurance, and a W-9. Winning bidders must possess an active SAM.gov registration and a Unique Entity ID. This solicitation is open to various small business designations, including VOSB, SDVOSB, WOSB, and HUBZone. The contract is subject to federal regulations, including the Davis-Bacon Act or Service Contract Act for prevailing wages, and requires the submission of weekly certified payroll reports. Bonding requirements are tiered based on project value, with payment and performance bonds required for projects exceeding 35,000 dollars.

Westover Job Corps Center

POSTED

DEADLINE

DETROIT JCC-2026-41 – PLUMBING, HEATING, COOLING & ELECTRICAL

Solicitation # detroit-jcc-2026-41-plumbing-heating-cooling-electrical

Serrato Corporation is seeking a licensed contractor to provide ongoing plumbing, heating, cooling, and electrical services for the Detroit Job Corps located at 11801 Woodrow Wilson in Detroit, Michigan. This solicitation, identified as detroit-jcc-2026-41-plumbing-heating-cooling-electrical, falls under NAICS code 238220 and requires a provider capable of maintaining essential facility systems. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by the deadline of May 31, 2027. Primary coordination for this contract is managed by Toni Robinson.

Serrato Corporation

POSTED

DEADLINE

CBP6729 Cafeteria Dishwasher Replacement

Solicitation # CBP6729

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a commercial conveyor dishwasher at the San Diego Job Corps Center in Imperial Beach, California. The project involves the removal and disposal of an existing Stero STPCW-ER-20 system and the installation of a new commercial-grade system capable of supporting meal service for 600 people, three times daily. The estimated contract value ranges from 25,000 to 100,000 dollars. Bidders must conduct a mandatory physical site visit and submit their proposals by November 9, 2026. Award decisions will be based on overall best value and responsiveness. The contract is subject to strict federal regulations, including Construction Wage Rate Requirements (formerly Davis-Bacon Act), requiring the payment of prevailing wages and the submission of certified payroll reports. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Required submission documents include the MTC Bid for Lump Sum Contract form, a bid breakout, a W-9, and a supplier self-certification form. Additionally, contractors must possess a Unique Entity ID (UEI) for reporting purposes and comply with Buy American and security requirements. Payment is subject to a 10 percent retainage until substantial completion and final acceptance.

San Diego Job Corps Center

POSTED

DEADLINE

More opportunities from State University of New York (SUNY)

Same awarding agency

Automation System Software Support and IntegrationThe Automation System Software Support and Integration subcontract provides essential technical support for software interfaces on SUNY Upstate Medical University laboratory projects. The scope of work focuses on maintaining the connection between Power Express automation hardware and the Laboratory Information System through firmware updates, software patching, and the troubleshooting of data transmission errors. Additionally, the contractor is responsible for performing system backups and software-level diagnostics to ensure operational stability. Strict adherence to HIPAA compliance is required to protect patient data throughout the duration of the project. To verify performance and system integrity, the contractor must deliver detailed software update logs and integration validation reports. This engagement falls under NAICS code 541512 and supports prime contractors in delivering integrated laboratory automation solutions for the State University of New York.

Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

Laboratory Automation System Maintenance and InspectionThis subcontract for Laboratory Automation System Maintenance and Inspection involves providing specialized technical support for laboratory projects at SUNY Upstate Medical University. The scope of work focuses on the preventative maintenance, diagnostic inspection, and corrective repair of Power Express automation robotics. Key responsibilities include conducting scheduled calibrations, validating system performance, troubleshooting hardware failures, and replacing worn components utilizing proprietary diagnostic tools. To ensure compliance and quality, the contractor must hold OEM Certification for Power Express and strictly adhere to CLIA and CAP standards. Deliverables for this engagement include the submission of detailed inspection reports and comprehensive maintenance logs. The contract is categorized under NAICS code 811219 and is managed through the State University of New York system.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 15 hours ago

DEADLINE

Construction Cost EstimationThis subcontract opportunity with the State University of New York involves providing detailed construction cost estimating services for prime contractors working on facility projects at SUNY Binghamton. The selected provider will be responsible for analyzing design documents and utilizing specialized software, such as RSMeans, to deliver accurate cost projections at both the 30 percent and 75 percent document levels. Qualified candidates must hold a Certified Professional Estimator designation or possess equivalent professional experience. Interested parties should note that the solicitation was posted on November 2, 2026, with a response deadline of November 24, 2026. The project falls under NAICS code 541330 for engineering services.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Energy Consulting (Executive Order 22)This subcontract opportunity with the State University of New York involves providing specialized energy consulting services for prime contractors working on facility projects at SUNY Binghamton. The primary objective is to ensure all projects maintain strict compliance with New York State Executive Order 22. The selected consultant will utilize energy modeling software to analyze carbon reduction, energy efficiency, and overall sustainability requirements, ultimately delivering design recommendations and a formal energy compliance report. Qualified candidates should ideally possess a LEED AP or an equivalent sustainability certification to meet the technical demands of the role. Interested parties must submit their responses by November 24, 2026. This engagement falls under NAICS code 541620, focusing on environmental consulting to meet the state's rigorous sustainability mandates.

Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

Asbestos Building Material SurveyThis subcontract involves performing comprehensive asbestos-containing materials surveys for prime contractors working on facility projects at SUNY Binghamton. The scope of work focuses on 1980s-era buildings, requiring the sampling and testing of walls and building finishes through laboratory analysis and environmental sampling tools to ensure safe demolition practices. The final deliverable for these services is a detailed Asbestos Building Material Survey Report. To qualify for this engagement, personnel must hold a valid New York State Department of Health Asbestos Inspector Certification. The opportunity is categorized under NAICS code 541620 and is associated with the State University of New York. Interested parties should note the response deadline of November 24, 2026.

Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

Fire Protection & Sprinkler System DesignThis subcontract involves the professional design of fire sprinkler systems for facility projects at SUNY Binghamton. The selected contractor will be responsible for the layout, piping, and head placement for a 35,000 square foot space, ensuring all work adheres to university regulations, local fire codes, and NFPA standards. The final deliverables include comprehensive fire protection and sprinkler system design plans and specifications created using specialized fire protection design software. To qualify for this engagement, the contractor must employ a New York State Licensed Professional Engineer. The project falls under NAICS code 541330 and is managed through the State University of New York. Interested parties must submit their responses by the deadline of November 24, 2026.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Structural Engineering DesignThis subcontract for Structural Engineering Design involves providing structural analysis and design services for a level 3 alteration of a 35,000 square foot facility at SUNY Binghamton. The selected contractor will be responsible for developing structural drawings and specifications for new interior layouts, which include wall removals and modifications to buildings dating from the 1980s. All work must be performed using structural modeling software and must adhere strictly to New York State building codes. The project requires a New York State Licensed Professional Engineer to oversee the work and deliver final structural design documents, detailed calculations, and signed and sealed drawings. This opportunity is categorized under NAICS code 541330 and is associated with the State University of New York. Interested parties must respond by November 24, 2026.

Engineering Services

POSTED

about 15 hours ago

DEADLINE

Sports Lighting Fixture and Pole SupplyThis subcontract agreement involves the supply of specialized lighting infrastructure for facility projects at SUNY Oneonta. The scope of work includes providing LED sports-grade luminaires, galvanized steel lighting poles, and associated control panels and timers. The supplier is responsible for delivering all specified hardware to the project site while ensuring all equipment adheres to university and state energy and lighting standards. The contract is managed under the State University of New York system with a response deadline of December 1, 2026. Classified under NAICS code 335121, the agreement focuses on the procurement of high-performance lighting components to be utilized by prime contractors on campus improvements.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 15 hours ago

DEADLINE

Lighting Pole FoundationsThis subcontract for Lighting Pole Foundations involves the installation of concrete foundations and footings for prime contractors at State University of New York Oneonta facility projects. The scope of work includes performing excavation for pole footings, installing reinforcement steel and anchor bolts, and the pouring and finishing of ready-mix concrete to deliver cured foundations capable of supporting specified lighting poles. The project falls under NAICS code 238110 and was posted on November 2, 2026, with a response deadline of December 1, 2026. All work is to be performed for the State University of New York system.

Poured Concrete Foundation and Structure Contractors

POSTED

about 15 hours ago

DEADLINE

Track and Field Lighting InstallationThis subcontract for the State University of New York involves the installation and wiring of lighting upgrade systems for track and field facilities at SUNY Oneonta. The selected contractor will work under prime contractors to install lighting fixtures and poles, run electrical conduit and wiring, and connect all systems to power sources. The scope of work concludes with the comprehensive testing and commissioning of the system to ensure it is fully operational. Qualified bidders must possess a New York State Electrical License to perform this work under NAICS code 238210. The solicitation was posted on November 2, 2026, with a response deadline of December 1, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 15 hours ago

DEADLINE

Specialized Equipment TransportThis subcontract for Specialized Equipment Transport involves the logistics and delivery of 36 industrial fan coil units for projects at the State University of New York at Buffalo. The selected contractor is responsible for the complete transport process, including the loading, hauling, and unloading of the HVAC equipment from the manufacturer to the final designated university location in Buffalo, New York. To qualify for this engagement, the provider must maintain standard commercial freight insurance and all necessary transport licenses. The project falls under NAICS code 484220, with a response deadline set for November 24, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

Supply of Vertical Fan Coil UnitsThis subcontract agreement involves the supply and delivery of 36 vertical fan coil units for facility projects at the State University of New York at Buffalo, specifically for delivery to Clemens Hall. The scope of work requires the manufacture or sourcing of 12 Size 4 units and 24 Size 3 units, all of which must feature a floor-exposed design with a top outlet, front inlet, 3-row cooling coils, 2 kW electric heat, and 277V single-phase motors. The provider is responsible for delivering completed units and providing all necessary technical specifications and cut sheets to ensure equivalency. The contract is categorized under NAICS code 333413 and is managed through the State University of New York system.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS