This Government Contract opportunity from California was posted on August 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Steel Pipe Fabrication and Welding

Closed

State & Local

Submission Closed08/31/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E8-26-T-5790

Defense Logistics Agency

POSTED

DEADLINE

TANK, FABRIC, COLLAPSIBL

Solicitation # SPE8ED-26-T-1484

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Aluminum Fish distribution tank

Solicitation # SRC0000042181

The Ohio Department of Natural Resources, through the Division of Wildlife at the Castalia State Fish Hatchery, is soliciting quotes for the procurement of one new custom aluminum fish distribution tank. The required hardware consists of a 96-inch long, 66-inch wide, and 40-inch tall tank featuring two equal compartments of approximately 385 gallons each. Technical specifications include 2-inch insulated closed-cell walls, floor, and ceiling, constructed with 3003-H14 smooth aluminum sheets and 6061-T6 aluminum extrusions. The tank must be equipped with four 12-volt Fresh-Flo TT aerators, an electrical switch box, an oxygen system with flowmeters and ceramic diffusers, and two 6-inch camlock discharges. A rough design mockup must be submitted to the ODNR for verification prior to the commencement of construction, and the final product must include a 5-year workmanship warranty. The contract will be awarded to the lowest responsive and responsible bidder based on the low lot total. The State will apply specific preferences for Buy American, Buy Ohio, and Veteran-Friendly Businesses in accordance with Ohio Administrative Code. Delivery is required no later than January 15, 2027, under FOB Destination terms. For contractors located within 100 driving miles of the Castalia facility, the ODNR will handle pickup; otherwise, the contractor is responsible for delivery. All submissions must be made electronically through the Ohio Buys portal. Standard state terms apply, including requirements for independent contractor status, compliance with equal employment opportunity laws, and adherence to offshore service restrictions. Payment is due within 30 calendar days of the receipt of a proper invoice, with electronic funds transfer being the preferred method.

Dnr750784 Castalia State Fish Hatchery Dnreri

POSTED

DEADLINE

CYLINDER, COMPRESSED GA

Solicitation # SPE4A6-26-T-37NQ

This solicitation, issued by the DLA Aviation ASC Commodities Division under number SPE4A6-26-T-37NQ, is a request for quotations for one compressed oxygen-nitrogen cylinder containing 40 cubic feet. The procurement is classified as a Commercial Off the Shelf (COTS) item with no shelf life requirement. The delivery is required to be made FOB Destination to a US Army unit in Hohenfels, Germany, with an original required delivery date of September 8, 2026. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS) by the deadline of October 6, 2026. The contract incorporates rigorous technical, quality, and safety standards. Quality assurance involves specific sampling methods such as MIL-STD-1916 or ASQ H1331, with strict acceptance criteria requiring zero non-conformances in sample lots. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements, and because the item involves hazardous materials, labeling must comply with the Hazard Communication Standard. Furthermore, the contract is subject to various federal regulations, including the Buy American Act, the Berry Amendment, and cybersecurity safeguarding requirements under DFARS. Contractors are required to use the Wide Area WorkFlow (WAWF) system for all electronic invoicing and receiving reports.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TANK, EXPANSION, CHILLED

Solicitation # SPE8E9-26-Q-0795

This solicitation, issued by DLA Troop Support Construction & Equipment MRO SVC on September 28, 2026, is a request for quotations for the procurement of one chilled water expansion tank, identified by NSN 5430-01-096-9196. The contract is a fixed-price acquisition with a required delivery of 60 days after award. Interested parties must submit their quotes through the DLA Internet Bid Board System (DIBBS) no later than October 5, 2026. While the solicitation is not a small business set-aside, it includes specific evaluation factors regarding the use of reconditioned or remanufactured supplies, requiring that any such material be new, unused, and meet all technical specifications. The procurement is subject to stringent technical, quality, and safety requirements. Technical standards are governed by the DLA Master List of Technical and Quality Requirements, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129. Specific prohibitions are in place regarding mercury-containing compounds to ensure they do not come into contact with furnished hardware, except for specific functional uses. Additionally, the technical data is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed required training to access such data. Compliance with the Buy American Act and various cybersecurity and labor standards, including equal opportunity and anti-trafficking provisions, is also mandatory. Invoicing and payment will be managed electronically through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

CYLINDER, COMPRESSED GA

Solicitation # SPE4A6-26-T-36NB

Solicitation SPE4A6-26-T-36NB is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 20 empty 50 lb refillable compressed gas cylinders, identified by NSN 8120-01-623-4014. The requirement specifies a delivery timeframe of 165 days after the order, with a need ship date of March 17, 2027, and an original required delivery date of June 13, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. Quality assurance will be managed via sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance under MIL-STD-105/ASQ Z1.4. Offerors must submit quotes through the DLA Internet Bid Board System (DIBBS) and comply with various federal regulations, including the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Payment and invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CYLINDER, COMPRESSED GA

Solicitation # SPE4A5-26-T-472X

Solicitation SPE4A5-26-T-472X is a total small business set-aside issued by DLA Aviation for the procurement of 93 drained and empty 45-minute 30-year compressed gas cylinders, identified as NSN 8120016995561 and Scott Technologies, Inc. part number 804722-31-D. This commercial off-the-shelf item is subject to a delivery lead time of 166 days, with a required delivery date of March 31, 2027, and a need ship date of March 17, 2027. Delivery is FOB Origin, with the destination and acceptance point located at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to quality and technical standards, including Compressed Gas Association TB-17-2000 for cylinder treatment and painting. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific acceptance quality levels for critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001, with additional requirements for DOT domestic shipments and UN international requirements for exports. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

CFA-686 Carbon-based Fuels Capability - CO2 Storage Vessel

Solicitation # INL-26-056

Battelle Energy Alliance, LLC, acting as the Management and Operating Contractor for the Department of Energy's Idaho National Laboratory, is seeking Expressions of Interest for the design, fabrication, testing, and inspection of the V-738 pressure vessel. This vessel is a 200 cubic foot, ASME BPVC Section VIII, Division 1 code U-stamped unit intended for gaseous CO2 service within the Central Facilities Area Carbon-based Fuels Capability. The horizontal vessel will be constructed from 304/304L stainless steel with a design pressure of 1,800 psig and a temperature range of -40 to 500 degrees Fahrenheit. It features a 36-inch inner diameter, seven nozzles, nine band heating elements, and Foamglas insulation with aluminum sheathing. The unit must be designed for static, seismic, and wind loading per IBC 2024, ASCE 7-10, and ACI 318-19 to withstand the high desert environment of Idaho. The procurement process begins with this Expression of Interest to identify qualified vendors, with selected firms invited to a subsequent Request for Proposal for a firm-fixed price contract. Qualified offerors must possess a current U-stamp certificate, demonstrate expertise in stainless steel welding with 100 percent radiography, and provide a comprehensive quality control system meeting ASME BPVC Section VIII Division 1 Mandatory Appendices 10 and 47. The total project duration is 28 weeks after receipt of order, encompassing design, fabrication, and delivery to the Idaho National Laboratory. Interested firms must submit a qualification package of no more than five pages to Chase Egbert by October 16, 2026, detailing their technical capabilities, inspection plans, and availability of experienced project and quality control management.

Battelle Energy Alliance–doe Cntr

POSTED

DEADLINE

ADAPTER, COMPRESSED GAS

Solicitation # SPE4A6-26-T-35RC

Solicitation SPE4A6-26-T-35RC is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 16 compressed gas cylinder valve adapters, identified as National Stock Number 8120007766443. These adapters are commercial off-the-shelf items designed for high pressure nitrogen gas valve connections. The procurement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332420. The required delivery date is March 28, 2027, with shipping terms set as FOB Origin and delivery to DLA Distribution Cherry Point, North Carolina. The contract mandates strict adherence to quality and safety standards, including the submission of approved Safety Data Sheets and OSHA Hazard Warning labels prior to award. Packaging and marking must comply with MIL-STD-129 and DOT requirements, while sampling will follow MIL-STD-1916 or ASQ H1331. Inspection and acceptance will occur at the destination. Key regulatory requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and cybersecurity protections under DFARS 252.204-7012. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Special Shaped Aluminum Structural Sections (PN LS7237)This subcontract involves the supply of 235 specialized aluminum structural sections, specifically part number PN LS7237, for prime contractors working on DLA Troop Support projects. The components must be manufactured using Aluminum Alloy 2024 / T-4, with required lengths between 10 to 12 feet and a weight of 0.020 LB/FT. The contract is managed by the Department of Defense through the agency at Warner Robins, with performance taking place at Robins Air Force Base. To be eligible, providers must ensure full compliance with DFARS 252.204-7012 and CMMC Level 2 standards. The response deadline for this opportunity is October 2, 2026.

POSTED

DEADLINE

1,000-Gal Stainless Steel Vacuum Tanks

Solicitation # 63-ARM1202926

North Carolina State University is soliciting quotes for two 1,000-gallon stainless steel vacuum tanks to be used in a laboratory Mach-7 Reflected Shock Tunnel for research purposes. The tanks must be constructed from 304 or 316 stainless steel for outdoor use and be rated for pressure between -14psi and +15psi. Technical specifications require a bottom drain port of at least 6 inches, at least two 1-inch NPT ports, and specific Raised Face Slip On flanges for size 10 and size 4 pipes at designated heights and orientations. All pressure vessels must comply with ASME standards, and the supplier is required to obtain drawing approval from the Principal Investigator prior to fabrication. Bids must be submitted via the Bonfire Public Portal by September 30, 2026, and must include data sheets, brochures, or descriptive literature. Evaluation is based on the most advantageous bid, with a price-matching preference available for North Carolina resident bidders who are within 5 percent or 10,000 dollars of the lowest nonresident quote. Payment terms are Net 30 days following the receipt of a correct invoice or acceptance of goods. The university reserves the right to perform inspections at the bidder's site to ensure equipment conforms to specifications before the contract award or during the contract term.

North Carolina State University

POSTED

DEADLINE

Hot Water Storage and Expansion Tank SupplyThis subcontract involves the procurement and delivery of commercial-grade domestic hot water storage tanks and expansion tanks for prime contractors working on Iowa Department of Administrative Services projects. The equipment must be delivered to the Newton Correctional Facility and strictly adhere to the specifications outlined in the Project Manual dated September 9, 2026. The solicitation was posted on September 11, 2026, with a response deadline of October 6, 2026. Classified under NAICS code 332420, the contract is managed by the state of Iowa and requires the supplier to ensure all specified equipment is delivered directly to the facility site.

Iowa

POSTED

19 days ago

DEADLINE

in 6 days

AI Contract Overview

The Board of Public Utilities Commissioners of the City of Long Beach is seeking a subcontractor for the fabrication of steel piping systems. The scope of work encompasses cutting, forming, welding, and joint preparation, with all processes required to adhere to AWWA C219/C227 and ASTM A36 standards. Additionally, the contractor must perform pressure testing and proof-of-design verification to ensure system integrity. This opportunity is categorized under NAICS code 332420 and will be performed in Long Beach, California. Interested parties must submit their responses by the deadline of August 31, 2026.

General Info

Subcontractor for steel piping fabrication in Long Beach, California, due August 31, 2026.

Agency

California → Board of Public Utilities Commissioners of the City of Long Beach

NAICS

332420 - Metal Tank (Heavy Gauge) Manufacturing

Place of Performance

Long Beach, CA, 90815, USA

Set-Aside

NONE

Documents

This scope was carved out of WD-07-26.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Rancho Los Alamitos Transmission Main Abandonment Project

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 15

subcontract

Response DeadlineAug 31

Deadline has passed

Submission Closed

08/31/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → Board of Public Utilities Commissioners of the City of Long Beach

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Board of Public Utilities Commissioners of the City of Long Beach

Office AddressN/A

ContactsNo contact information available

Full Description

Fabrication of steel piping systems including cutting, forming, welding, and joint preparation per AWWA C219/C227 and ASTM A36 standards. Includes pressure testing and proof-of-design verification.