Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Storage Unit Supply and Integration

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 337127
New
Federal
Electrostatic Discharge (ESD) compliant laboratory benches and chairs
Solicitation # 80NSSC26941644Q
Solicitation 80NSSC26941644Q is a firm-fixed-price, small business set-aside procurement issued by the NASA Shared Services Center for the acquisition of brand-name Treston Electrostatic Discharge (ESD) compliant laboratory furniture. The requirement consists of 14 ESD lab benches featuring 6-inch double drawer assemblies, 15 AMP electrical channels, instrument shelves with a 500lb capacity, and LED undershelf lighting, along with 14 Integra ESD upholstered chairs with a minimum weight capacity of 300lb. All items must be delivered FOB Destination to NASA GSFC Code 524 in Greenbelt, Maryland, where final inspection and acceptance will be conducted by the NASA Point of Contact to ensure all specifications are met and items are free of defects. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. To be considered for award, offerors must be registered in the System for Award Management (SAM) and provide both proof of pricing from the manufacturer and official authorization from the original equipment manufacturer to resell the specified Treston items. Quotes must be submitted by September 9, 2026, and must remain valid for 30 days. The procurement includes specific federal requirements regarding duty-free entry marking for foreign suppliers and mandates that the contractor obtain all necessary export licenses for the performance of the contract.
NASA Shared Services Center

POSTED

about 14 hours ago

DEADLINE

in 1 day
NAICS: 337127
New
Federal
Laboratory Furniture for NTSB High-Bay Facility
Solicitation # 9531BM26Q0028
The National Transportation Safety Board's Office of Research and Engineering is soliciting quotes under RFQ 9531BM26Q0028 for the procurement of laboratory furniture to support instruments, component disassembly, and photographic documentation at the NTSB High-Bay Facility in Upper Marlboro, Maryland. This is a 100% total small business set-aside under NAICS code 337127. The requirement includes various items such as exam workbenches, packaging workbenches, photo tables, mobile exam tables, stereoscope tables, and a mobile laptop station. Key technical specifications require black epoxy worksurfaces, a minimum load capacity of 1,200 pounds, and electric height adjustability of at least 12 inches. The contract is a firm fixed-price award with an estimated value of 26,000 dollars, and all items must be delivered within 90 days of the award date. The government will award the contract based on a best-value procurement process, where the technical specifications and past performance are considered significantly more important than price. Interested quoters must be registered in the System for Award Management and submit a technical quote, a price section, and at least two completed past performance questionnaires. Quotations are due by 4:00pm EST on September 18, 2026, and should be submitted to the contracting officer, P. Matt Hazlinsky. The procurement follows FAR subpart 12.6 streamlined procedures for commercial products and services and incorporates standard clauses regarding the Buy American Act and small business subcontractor payments.
Ntsb Acq Lease Management Division

POSTED

4 days ago

DEADLINE

in 4 days

AI Contract Overview

Show more

The contract involves the supply of 100 industrial storage units designed with 2 to 3 drawers, including at least one file drawer, and adhering to specific maximum dimensions of 25 inches in height, 16 inches in width, and 18 inches in depth. These units must be available in black or grey to complement existing workstation colors. The procurement is managed by the Department of National Defence under the Government of Canada and is intended to be performed in Nova Scotia. The solicitation was posted on June 15, 2026, with a response deadline set for July 15, 2026. It is classified as a subcontract opportunity under the NAICS code 337127, which pertains to office furniture manufacturing. While no set-aside type is indicated, the contract emphasizes timely provision and integration of storage units suitable for industrial and office use, underscoring compatibility with current outfitting standards. Further information and tender details are accessible through the designated Canada Buys portal link.

General Info

Supply of 100 industrial storage units with drawers, black/grey, for Canadian Defence, Nova Scotia.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

337127 - Institutional Furniture ManufacturingView NAICS

Place of Performance

Nova Scotia, CAN

Set-Aside

NONE

Documents

This scope was carved out of W0100-18958382.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Workstations with Storage and Electrical Outlets

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 100 industrial storage units with 2–3 drawers (including one file drawer), maximum size 25"H x 16"W x 18"D, in black or grey to match workstations.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 333248
New
International
Selective Laser Sintering (SLS) 3D Printer
Solicitation # W6399-27-SS20
The Department of National Defence is seeking to acquire one Selective Laser Sintering (SLS) 3D Printer for high-performance manufacturing, including prototyping, tooling, and the production of end-use parts using thermoplastic polymer powders such as Polyamide 11, Polyamide 12, Polypropylene, and TPU. The equipment must feature a minimum print volume of 150 x 150 x 300 mm, a build chamber reaching at least 50 degrees Celsius with a gradual cool-down process, and an enclosed environment for inert gas introduction. Additionally, the system must be compatible with standard North American power (120V at 60Hz) and include a software license for at least three years that functions without an internet connection. The procurement also includes requirements for spare parts, such as optical cassettes, recoater blade sets, infrared heaters, and sealing foam sets, as well as installation services. The contract will be awarded to the compliant offer with the lowest evaluated price, based on mandatory technical criteria. Deliverables must be provided no later than March 31, 2027, with delivery terms set as INCOTERMS 2020 DDP to Petawawa, Ontario. Proposals must be submitted electronically to the contracting authority, Mélanie Crocker, by the deadline of October 13, 2026. The successful contractor must adhere to environmentally preferable packaging specifications, ensuring materials are reusable, returnable, or recyclable. Payment will be made via direct deposit or wire transfer within 30 days of receiving an undisputed invoice after the work is completed.
All Other Industrial Machinery Manufacturing

POSTED

3 days ago

DEADLINE

in 29 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS