Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Strap Boom Ratchet and Strap Adjustable Rope Lanyard 8'

Active
Z5291State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Nashville Electric Service has issued solicitation Z5291 for the procurement of specialized safety and rigging equipment. The requirement consists of four strap boom ratchets with a minimum size of 2 by 58 1/2 inches, a 6,000 lb web, and a 10,000 lb ratchet featuring a sliding D ring on a weather resistant pad. Additionally, the agency requires 12 fully adjustable 8 foot positioning rope lanyards with a 1/2 inch diameter. These lanyards must include rope protection for maximum life, a built-in wear indicator for inspections, and must strictly comply with OSHA 1926.959, ASTM F887.1, and ANSI Z359.3 standards. Bids must be submitted through the Bid Center by 2:00 pm local time on October 6, 2026. Alternate brands are not accepted, and vendors are responsible for resolving any discrepancies between descriptions and part numbers with the procurement contact, Kyle Kegley, prior to the closing date. Award decisions will be based on technical compliance and the vendor's ability to provide the earliest delivery, which must be stated in calendar days.

General Info

Nashville Electric Service is procuring specialized safety rigging equipment and positioning rope lanyards.

Place of Performance

Nashville, TN, USA

Set-Aside

NONE

Documents

(1)

RFB Z5291 - Strat Boom Ratchet and Lanyard Bid

PDF•rfb

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTennessee → Nashville Electric Service
Contacts1 person available
OfficeNashville, TN, USA
Office AddressNashville, TN, USA
Contacts

Full Description

Show more
EA STRAPBOOM RATCHET RATCHET BOOM STRAP, 2"X 58 1/2" MINIMUM. 6000 LB. WEB MINIMUM 10,000 LB. RATCHET MINIMUM. SLIDING "D" RING ON WEATHER RESISTANT PAD. BUCKNGHM 3809R-62 HASTINGS EX2-1167 BASHLINS 703R-60 JS16286024900 212EA STRAPADJUSTABLEROPE LANYARD 8' FULLYADJUSTABLEPOSITIONING LANYARD. 8 FT IN LENGTH AND 1/2 INCH DIAM. MUST MEET OSHA 1926.959, ASTM F887.1, ANSI Z359.3 STANDARDS. NEEDSPROTECTION OVER ROPE TO PROVIDE MAXIMUM ROPE LIFE. NEEDSA WEAR INDICATOR BUILTINTO ROPE FOR INSPECTIONS. BASHLIN 4019NXBC-8AL BUCKNGHM 9+R08Q2-8 Stateyour earliest delivery IN CALENDAR DAYS: _ Alternate brands will not be accepted on this inquiry. To have your product evaluated for future consideration, contact the buyerlisted in this RFB. _ In the eventof a discrepancy between the ordering description and part number, it is the responsibility of the vendor to contact the buyerfor clarification before the published CLOSE DATE. _ RFB: Close Date: Z529110/6/2026 Page: 2 of 2 DELIVERY MAY BE CONSIDEREDIN THE AWARDOF THIS BID. _ Note: This bid must be submitted usingthe Bid Center and must be received by 2:00 pm localtime on the published CLOSE DATE. _ Procurement Contact : Kyle Kegley, Buyer II (615)747-3572 or kkegley@nespower.com

Similar Contracts

Same NAICS industry code

NAICS: 423840
New
SLED
Channelizers For SB Express Lanes
Solicitation # 27-1003501
The San Bernardino County Transportation Authority (SBCTA) is soliciting bids under solicitation number 27-1003501 for the purchase of Caltrans approved Pexco FG336UR channelizers for the SB Express Lanes. These units are essential for separating express lanes from general purpose lanes to prevent unauthorized entry. Based on replacement rates since August 2024, the agency estimates an annual requirement of 434 units. The contract aims to secure an adequate supply for a three-year period to replace weather-worn units and support future lane expansions. The contract term begins upon the issuance of a Notice to Proceed and runs through November 30, 2029, with the possibility of two one-year extensions, potentially extending the agreement to November 30, 2031. The contract will be awarded to the lowest responsive and responsible bidder, with unit prices required to include all labor and transportation charges, as well as state and local sales tax. Bidders must submit their proposals electronically via the PlanetBids Vendor Portal by October 22, 2026, at 2:00 p.m. Key requirements include maintaining Commercial General Liability insurance of at least 2,000,000 dollars per occurrence and complying with Title VI of the Civil Rights Act, the Drug-Free Workplace Act, and the California Fair Employment and Housing Act. Additionally, firms that provided architectural or engineering services for this specific work to SBCTA prior to the bid are prohibited from participating.
San Bernardino County Transportation Authority

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 423840
New
SLED
City Of Folsom Turbine Water Meter Procurement Contract (3-Year)
Solicitation # 20260929022
The City of Folsom Utilities Department is soliciting bids for a three-year procurement contract for the furnishing and delivery of turbine water meters for its potable water system. The contract covers fiscal years 2026-27 through 2028-29, with an anticipated annual procurement of approximately 64 meters ranging in size from 1.5 to 10 inches. All meters must conform to AWWA C-701 and C-707 standards, be certified to NSF/ANSI 61 and 372, and meet California Bill AB1953 guidelines. The scope is strictly limited to the supply and delivery of hardware to the City Water Treatment Plant in Folsom, California, and specifically excludes all installation or labor services. The contract will be awarded to the lowest responsive and responsible bidder, with the Folsom City Council overseeing the selection. Bidders are required to provide a 10 percent bid bond, and the successful awardee must submit performance and payment bonds along with evidence of insurance prior to executing the purchase agreement. Deliveries must be made F.O.B. destination with freight prepaid within 60 to 90 days of order receipt. Payment terms are Net 30 days. Bidders must submit a sealed package including completed bid forms for all three fiscal years, a manufacturer joint warranty endorsement, and a signed acknowledgment of the purchase agreement terms.
City of Folsom Utilities Department

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 423840
New
SLED
City Of Folsom Positive Displacement Water Meter Procurement Contract (3-Year)
Solicitation # 20260929021
The City of Folsom Utilities Department is soliciting bids for a three-year procurement contract to supply positive displacement water meters for its potable water system. The contract covers fiscal years 2026-27 through 2028-29, with an estimated annual requirement of approximately 2,320 meters in various sizes ranging from 5/8 inch to 2 inches. The meters must be magnetic-driven, flat nutating disc or oscillating piston types, and must comply with AWWA C700, NSF/ANSI 61, NSF/ANSI 372, and California Bill AB1953. Technical requirements include lead-free alloy maincases, a working pressure capability of 150 psi, and sealed magnetic drive registers compatible with Zenner Stealth Reader MIU or Badger Orion water endpoints using a Sensus protocol. The contract will be awarded to the lowest responsive and responsible bidder. Bidders are required to submit a sealed proposal by November 13, 2026, including a 10 percent bid bond, detailed technical specifications, and a manufacturer's full-replacement warranty for a minimum of 10 years. Deliveries are to be made F.O.B. destination to Folsom, California, within 60 to 90 days of order receipt. Payment terms are Net 30 days. The successful bidder must also provide performance and payment bonds and evidence of insurance prior to the execution of the purchase agreement.
City of Folsom Utilities Department

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 423840
New
SLED
City Of Folsom Compound Water Meter Procurement Contract (3-Year)
Solicitation # 20260929020
The City of Folsom Utilities Department is soliciting bids for a three-year procurement contract for the furnishing and delivery of magnetic drive positive displacement compound water meters for its potable water system. The contract covers estimated quantities for fiscal years 2026-27 through 2028-29, with an anticipated annual requirement of approximately 29 meters ranging in size from 2 to 8 inches. The scope is strictly limited to the supply and delivery of equipment to the City Water Treatment Plant in Folsom, California, and specifically excludes all installation or labor services. All meters must comply with AWWA Standard C-702, NSF/ANSI 61, and NSF/ANSI 372 lead-free standards, and must be guaranteed to operate at a working pressure of 150 psi. Award will be granted to the lowest responsive and responsible bidder. To be considered responsive, bidders must provide a sealed package including detailed technical literature, a noncollusion affidavit, and a joint warranty endorsement signed by an authorized corporate officer of the parent manufacturing company. A critical requirement is a minimum ten-year full-replacement warranty, with the seller and manufacturer held jointly and severally liable. Following the initial ten years, a prorated replacement schedule extends to year 20. The successful bidder must provide a 10 percent bid bond, as well as performance and payment bonds and evidence of insurance prior to contract execution. Delivery is required within 60 to 90 days from receipt of order on an F.O.B. destination basis with freight prepaid, and payment terms are Net 30 days.
City of Folsom, Utilities Department

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 423840
New
SLED
ONE (1) TIME PURCHASE OF ONE (1) 2027 TOYOTA REACH TRUCK – MODEL RF1-BE1X35
Solicitation # 36001
Philadelphia Gas Works is soliciting bids for the one-time purchase of one 2027 Toyota Reach Truck, Model RF1-BE1X35. The procurement is managed as a one-step unsealing process with a response deadline of October 13, 2026. The successful bidder must provide a unit that complies with all federal and state vehicle requirements, including the latest Federal Motor Vehicle Safety Standards and the Williams-Steiger Occupational Safety and Health Act of 1970. Key safety specifications include a horn, backup alarm, vertical operator-compartment intrusion protection bar, two Big Blue LED pedestrian warning lights, and an LED amber strobe light mounted above the overhead guard. Delivery must be coordinated with the Fleet Operations Department and made to the PGW North Operations Center in Philadelphia between 8 am and 2 pm on weekdays, with a 24-hour advance notice requirement. The vehicle must be delivered with permanent anti-freeze rated to -20 degrees Fahrenheit, no dealer branding, and a Pennsylvania state inspection sticker matching the last digit of the VIN. Bidders must submit manufacturer brochures, technical data, and manuals with their bid. Final payment is contingent upon the delivery of two copies of the owner, service, and parts manuals, as well as a completed pre-delivery inspection report. Invoices must be submitted as searchable PDFs to the designated accounts payable email, with payments processed electronically via PayMode.
Philadelphia Gas Works

POSTED

2 days ago

DEADLINE

in 12 days
View Details

More opportunities from Tennessee → Nashville Electric Service

Same awarding agency

NAICS: 335929
New
SLED
Cable Aluminum
Solicitation # Z5282
Nashville Electric Service is soliciting bids for a twelve month blanket order for aluminum cable, running from February 2027 through January 2028. The required material is 600 volt aluminum cable, specifically two 4/0 19 strand triplexed with one 2/0 19 strand neutral, featuring crosslinked polyethylene insulation with a minimum thickness of 5/64 inch. The cable must be Type USE-2 for 90 degree C, meet ICEA specifications, be UL labeled, and include specific imprints such as the manufacturer name, size, AL 600V XLPE, and year of manufacture, with sequential footage markings on the neutral conductor. All cable ends must have watertight seals. The contract requires monthly deliveries of approximately 3,000 feet during the first week of each month, alternating between the North, Donelson, and West Service Centers. Vendors must coordinate the specific delivery location one business day in advance. A critical requirement is the maintenance of a two month local stock supply within the NES Service Territory for emergency conditions, available for pickup 24 hours a day, 7 days a week. Consequently, only pre-approved vendors with local warehouses in the service territory are eligible to bid. Packaging specifications mandate that cable be shipped on sound wood reels with wood or steel drums and metal center hub collars, with a maximum size of 68 by 38 by 30 inches. Reels must be stamped with tare, net, and gross weights. Bidders must submit their proposals via the Vendor Web Portal by October 9, 2026, and must specify the brand quoted, as alternate brands are not accepted. For metals subject to escalation, quotes must include the base price, the index used, and the metal content in pounds per foot.
Other Communication and Energy Wire Manufacturing

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 335929
New
SLED
Cable
Solicitation # Z5283
Nashville Electric Service is soliciting bids for a twelve month blanket order for 84,000 feet of 600V aluminum cable, specifically two 2/0 19 strand triple xed with one #1 19 strand neutral. The cable must feature cross linked polyethylene insulation with a minimum thickness of 5/64 inch, be Type USE-2 for 90 degree C, and meet ICEA specifications with UL labeling. Approved manufacturers are limited to Prysmian, Gen Cabl, Nexans, and CME Converse, with no alternate brands accepted. The contract period runs from January 2027 through December 2027, requiring monthly deliveries of 7,000 feet to the North, Donelson, or West Service Centers. Additionally, vendors must maintain a two month emergency supply in a pre-approved local warehouse within the NES Service Territory, available for pickup 24 hours a day, 7 days a week. Technical requirements specify that cables must be imprinted with the manufacturer name, size, AL 600V XLPE, and year of manufacture, while the neutral conductor requires sequential footage marking and all ends must have watertight seals. Shipping must be on sound wood reels with a maximum size of 42 by 28 by 21 inches, containing approximately 1,000 circuit feet per reel and featuring metal center hub collars. Reels must be stamped with tare, net, and gross weights. Bids must be submitted via the Vendor Web Portal by October 8, 2026, with pricing remaining valid through November 4, 2026. Quotations must include any reel costs in the unit price and provide base price, index, and metal content for any elements subject to escalation.
Other Communication and Energy Wire Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 423610
New
SLED
Service Entrance Connectors
Solicitation # Z5281
Nashville Electric Service is soliciting bids for a twelve month blanket order for 1,716 commercial overhead five hole service entrance connectors for use on large commercial services. The contract period runs from January 2027 through December 2027, with a delivery schedule requiring 264 units in the first week of January and 132 units in the first week of each subsequent month. Deliveries will alternate between the North, Donelson, and West Service Centers, and vendors must coordinate the specific location one business day prior to delivery. Technical specifications require tin plated connectors with wire ranges of 750 MCM to 1/0 for the main hole and 500 MCM to 2 for the four tap holes. Each connector must feature two anodized aluminum set screws per conductor, prefilled holes with inhibiting compound, and a removable weatherproof insulating cover rated at 90 degrees C with a minimum dielectric strength of 240 volts per mil. Only Utilco UGD41-750600APTK or Pola PSEC14-750600 ATCP brands are acceptable. Eligibility is strictly limited to vendors with pre approved local stock warehouses within the NES Service Territory. The awarded vendor must maintain a two month emergency supply available for pickup 24 hours a day, 7 days a week, with this stock established at the time of the first shipment. Bids must be submitted via the Vendor Web Portal by October 12, 2026, and prices must remain valid through November 4, 2026. Award considerations will include technical compliance, brand approval, and the ability to meet all delivery and local stocking requirements.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
SLED
Station Control Cable
Solicitation # Z5289
Nashville Electric Service is soliciting bids under solicitation number Z5289 for 6,000 feet of Station Control Cable. The required cable must be copper, #10 AWG stranded with a minimum of 7 strands, featuring four conductors that are thermoplastic insulated and jacketed. Conductors must be color-coded red, black, green, and white. All materials must comply with the most recent version of NES Specification Number EC-211. The cable must be delivered on reels of 1,500 feet each, with sealed ends and a metal center hub collar. Reels must be of sound construction, measuring less than 69 inches in overall diameter and 44 inches in overall width, with a minimum center hole diameter of 2.75 inches. Required markings include tare, net, and gross weights stamped on the reels, and manufacturer, cable type, year of manufacture, and footage markings every 2 to 5 feet on the cable jacket. Each reel tag must also specify the manufacturer, style, year, and starting and stopping footage values. Bids must be submitted via the Vendor Web Portal by 2:00 pm local time on October 7, 2026. Offerors are required to state their earliest delivery in calendar days and specify the brand being quoted, as alternate brands will not be accepted. Delivery timelines may be considered as a factor in the award. Pricing must be inclusive of all costs, as reel deposits will not be accepted. The primary point of contact for this procurement is Shanna Faulk.
Other Communication and Energy Wire Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS