Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STRIP WING

Active
SPE4A6-26-T-14PNFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of one Strip Wing with NSN 1560-01-608-2561 under solicitation SPE4A6-26-T-14PN, with a delivery requirement of 138 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. The item is subject to DLA packaging standards, tailored quality requirements for both manufacturers and non-manufacturers, and inspection and acceptance at the origin. Government identification must be removed from non-accepted supplies, and physical identification of the bare item must be marked per RQ017. Item Unique Identification is not required due to service customer request, and DFARS 252.211-7003(c)(1)(i) governs this exemption. Technical data associated with the item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The place of performance is Robins AFB, Georgia, and inquiries should be directed to Bryan Distin at DLA. The solicitation was posted on August 9, 2026, with responses due by August 17, 2026, under the NAICS code 336413 for aircraft parts and equipment.

General Info

Procure one Strip Wing NSN 1560-01-608-2561, deliver in 138 days, subject to ITAR/EAR, DLA standards, Robins AFB performance.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-14PN Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
BRYAN DISTIN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STRIP WING
STRIP WING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-01-608-2561 Quantity: 1 EA Purchase Request: 7017408771QTY: 1 Delivery: 138 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
BLANKET ASSEMBLY
Solicitation # SPE4A7-26-T-634E
This contract is for the procurement of two units of a blanket assembly under solicitation SPE4A7-26-T-634E, with a delivery deadline of 89 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Cybersecurity requirements mandate CMMC Level 2 certification through a certified third-party assessment organization. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons anywhere, including foreign nationals in the U.S., and requires compliance with DFARS 252.225-7048. Access to controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and received formal approval from DLA. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is New Cumberland, Pennsylvania, and the primary point of contact is April Reed of the Department of Defense’s ASC Supplier Oper AE and AF Division.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BRUSH SEAL, COVER
Solicitation # SPE4A7-26-T-634H
The contract is for 45 purchase groups of BRUSH SEAL, COVER, with each purchase group containing two units, totaling 90 individual items. The item is identified by NSN 1680-01-062-1740 and is subject to strict export control under either ITAR or EAR, meaning any disclosure of associated technical data to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs handling of this controlled data, and distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access such information. The solicitation number is SPE4A7-26-T-634H, posted on August 9, 2026, with responses due by August 17, 2026. The contract falls under NAICS code 336413 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required 89 days after award, with performance taking place at Robins Air Force Base, Georgia. Primary point of contact is April Reed, reachable via phone or email provided. The contractor must also maintain CMMC Level 2 certification as a C3PAO and comply with physical marking requirements for the item.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SHIPPING AND STORAG
Solicitation # SPE8ED-26-T-1256
The contract under solicitation SPE8ED-26-T-1256 provides for the procurement of 115 units of a shipping and storage container, identified by part number IM2720-00000 and NSN 8145-01-541-0043, at a unit price of $115.000 for a total contract value of $13,225.00. Delivery is required within 64 days of award, with FOB Origin terms, and all shipments must be delivered to the DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Packaging and marking must comply with ASTM D3951, but are superseded by the DLA Master List of Technical and Quality Requirements, which take precedence. All packaging must be palletized per RP001 DLA Packaging Requirements for Procurement and labeled in strict accordance with MIL-STD-129, including use of 2D barcodes for tracking. The unit of issue and quantity per unit pack must match contract specifications, and government identification must be removed from non-accepted supplies. The item is subject to Covered Defense Information requirements, and compliance with safeguarding standards including NIST SP 800-171 and DFARS 252.204-7012 is mandatory. Hazardous materials, if applicable, must be labeled per 29 CFR 1910.1200 and accompanied by Safety Data Sheets prior to award, with immediate notification required for any changes in material composition. The solicitation is a total small business set-aside under NAICS code 336413, with proposals due by August 20, 2026, and must be submitted through the DLA Internet Bid Board System. Payment will be processed via Wide Area WorkFlow (WAWF), with invoices required to be submitted electronically. Clause 52.244-6 and 252.244-7999 govern subcontracting for commercial products and services, while clauses related to employment eligibility verification, combating human trafficking, and equal opportunity for workers with disabilities are incorporated by reference. The contracting officer’s representative and technical representative details are to be confirmed in the award, as are accounting and payment office information. The contract includes provisions on cybersecurity, information safeguarding, whistleblower rights, and limitations on the acquisition of covered defense telecommunications equipment. No
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 3 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
MMR R-T SLED, AIRCRA
Solicitation # SPE4A7-26-T-635Q
The contract pertains to the procurement of seven units of MMR R-T SLED for aircraft, identified by NSN 1680-01-522-5949, under solicitation SPE4A7-26-T-635Q with a response deadline of August 17, 2026, and a delivery requirement of 20 days after delivery order issuance. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, necessitating the contractor to be a certified third-party assessment organization. All supplies must comply with DLA packaging standards and inspection procedures at origin, and any non-accepted items must have government identification removed prior to disposal. The technical data associated with this item is controlled under either ITAR or EAR, restricting access and export to authorized parties only. Contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and receive formal approval from DLA to handle such data. Foreign nationals, including those employed by U.S. companies or subsidiaries, are included under these restrictions. Distribution is limited to contractors cleared by DLA and compliant with DFARS 252.225-7048. The contract is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with primary point of contact April Reed.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
WIPER PLATE ASSY
Solicitation # SPE4A7-26-T-633A
The contract is for the procurement of three Wiper Plate Assemblies with NSN 1680-01-562-1657 under solicitation SPE4A7-26-T-633A, responding to purchase request 7017011444. The items are subject to stringent technical and quality requirements referenced from the DLA Master List, with compliance tied to the version of the master in effect on the solicitation issue date or award date, depending on acquisition size. Packaging must adhere to DLA standards, and physical identification of the bare item is mandated. Inspection and acceptance occur at the manufacturer’s origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exemption. Technical data associated with the item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandated DLA training and questionnaire and received formal approval. The delivery deadline is 103 days after order, with performance location in Tracy, California, 95304-5000. The solicitation opens on August 9, 2026, and closes on August 17, 2026, with Rahsaan Deloney designated as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, ORIFICE, TIP
Solicitation # SPE4A7-26-T-634B
The item is a fitting, orifice tip with NSN 1650-00-604-6318, with a quantity of eight units required under purchase request 7016752333. Delivery is due within 82 days after award. The solicitation number is SPE4A7-26-T-634B, posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance taking place in New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is nya.currie@dla.mil, with phone number 804-279-6982. The item is classified under NAICS code 336413 and is subject to strict export controls under ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including those within the United States, without prior written authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs handling of this controlled data, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training and questionnaire, and received explicit DLA approval, may access the technical information.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A0-26-T-4211
The contract pertains to SUPPORT, STRUCTURAL items with NSN/Part Number 1560-01-650-4509, for a quantity of four units, under Purchase Request 7017745999, with delivery required within five days after delivery order. The solicitation, numbered SPE4A0-26-T-4211, was posted on August 9, 2026, and responses are due by August 17, 2026. The work is classified under NAICS code 336413 and is managed by the Department of Defense’s Aviation Supply Chain ESOC Buys office, with performance to occur at FPO, ZIP 96632. The contract is subject to stringent export control regulations under ITAR or EAR, meaning technical data associated with the item cannot be disclosed to any foreign person, whether inside or outside the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only DLA contractors with valid US/Canada Joint Certification Program certification, completed training on DOD export-controlled data, and approved access via the DLA questionnaire may receive the technical information. The primary point of contact for this solicitation is Danita Davis, reachable via email and phone provided.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RETAINER, LANDING GE
Solicitation # SPE4A5-26-T-337W
The contract pertains to the procurement of a retainer for landing gear, identified by NSN 1630-01-044-6825 and part number 209-050-114-7, with a quantity of one unit. Manufacturing must be performed using a metal casting process, requiring specific tooling, and suppliers are directed to contact designated DLA assistance teams for sourcing guidance related to tooling and materials. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The item must comply with stringent packaging standards per MIL-STD-2073-1E and marking specifications per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with zero non-conformances mandated unless otherwise specified, and attributes are classified with defined verification levels and AQLs. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all supplies must have government identification removed if not accepted. Delivery is FOB origin, with a 20-day lead time to meet the original required delivery date of August 13, 2026, and the final destination is the Taiwan Army's Zuoying Ammunition Sub-depot in Kaohsiung. Packaging, shipping, and freight logistics adhere to DLA-specific procedures, with the unit of issue as a single EA and no quantity variance permitted. The contract is issued under solicitation SPE4A5-26-T-337W by the Department of Defense under NAICS code 336413.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SEAL ASSEMBLY, CARTR
Solicitation # SPE4A7-26-T-632K
The contract pertains to the procurement of a seal assembly for a cartridge, identified by NSN 1650-00-589-1257 and part number 03211257, with a quantity of 58 units to be delivered FOB origin within 383 days. The item is classified as a critical application component, and no unit identification marking is required per the service customer’s request, though packaging must comply fully with MIL-STD-2073-1E and marking requirements under MIL-STD-129 without special codes. The contract incorporates technical and quality standards referenced from the DLA Master List, including packaging, demilitarization, cybersecurity certification at CMMC Level 2, and configuration change management. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required for acceptance unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Mercury and its compounds are strictly prohibited in the product except in defined exceptions such as batteries and sensors, with additional containment requirements for portable devices per NAVSEA 5100-003D. A separate first article test line item is included with a quantity of one unit, signaling that the contractor must conduct and submit a test sample as required by FAR 52.209-3; this line carries no separate charge unless otherwise stipulated, and its award is void if waived. All deliveries must be shipped to DLA Distribution San Diego, and the contractor is required to satisfy source approval documentation, inspection at origin, and adherence to tailored quality requirements for both manufacturers and non-manufacturers. The contract does not specify a shelf life, and pricing is fixed at $58.00 per unit for the main line item with no variance allowed in quantity.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-631G
The contract pertains to the procurement of five units of a support, structural item identified by NSN 1560-01-544-2830 under solicitation SPE4A7-26-T-631G, with a delivery deadline 124 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with applicability determined by the type of acquisition and relevant dates. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with specified attributes assigned strict verification levels or AQLs, and unspecified attributes treated as major unless otherwise defined. Zero non-conformances are required in sampling unless the contract states otherwise. Configuration changes require formal engineering change proposals and variance requests, and source approval documentation must meet specified standards. Packaging must comply with DLA requirements, and government identification must be removed from non-accepted supplies. Measuring and test equipment must be maintained and calibrated per applicable standards. The item involves components listed on Qualified Products or Manufacturers Lists, requiring compliance with procurement note H02. All special processes must be performed by NADCAP-approved organizations, as indicated on drawing 20145214. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and applies equally to U.S. entities and their overseas subsidiaries. DFARS 252.225-7048 governs this restriction. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire. Covering defense information is applicable, and non-tailored quality requirements based on SAE AS9100 apply to both manufacturers and non-manufacturers. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance at Tinker AFB, 73145-8000, and primary point of contact is Rekisha Burton.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-634P
The contract pertains to the procurement of two aircraft access doors, identified by NSN 0001S00000052, under solicitation SPE4A7-26-T-634P, with a delivery requirement of 54 days after award. The design and configuration are governed by multiple referenced drawings including 68A325591, 68A325596, 68A325599, and 68A890281, each specifying particular part configurations and associated engineering notes. Several military and industry part standards have been superseded and replaced, including ST3M460 by NAS-1097, ST3M461 by NASM20470, and PS15534 by PS15500.4, mandating use of the newer standards in fabrication and assembly. Additional components like 6M39, PS23041, 29M100, PS16002, PS14018, 6M91, and 6M148 are specified as called out on specific drawings. Spare parts must be provided with hinges and latches attached and include a quarter-inch trim on all sides except the inboard side where the hinge mounts. Technical and quality requirements are incorporated via DLA’s Master List, and export control regulations under ITAR or EAR apply to associated technical data, restricting disclosure to unauthorized foreign persons or entities. Access to controlled data is limited to contractors approved under the US/Canada Joint Certification Program, who have completed required DLA training and questionnaire. This solicitation is set aside for Women-Owned Small Businesses, with oversight by the Department of Defense’s ASC Supplier Operations division, and the point of contact is April Reed.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BAR ASSEMBLY, STEERI
Solicitation # SPE4A5-26-T-337T
The contract pertains to the procurement of a Bar Assembly, Steering, identified by NSN 4920-01-156-0944 and part number 70700-77112-041, with a required quantity of six units to be delivered within 20 days from the contract award. The item must comply with stringent DLA packaging standards per MIL-STD-2073-1E, including specific preservation methods, packaging materials, and marking requirements in accordance with MIL-STD-129, with no special marking designated. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, assigning verification levels of VII, IV, and II for critical, major, and minor attributes respectively, with zero non-conformances required unless otherwise stated. The product is subject to strict configuration change management and requires a formal Engineering Change Proposal or variance request for any deviations. Technical data is proprietary and insufficient for competitive sourcing, with suggested suppliers including Grain Valley Tool & Mfg. Co. and EDR Industries Inc., both holding the same part number. The item must adhere to cybersecurity requirements under CMMC Level 2 self-assessment, and no mercury or mercury compounds are permitted in packaging or preservation. The delivery is FOB origin, with inspection and acceptance occurring at origin, and the end destination is the Commanding Officer, INS TUNIR in Mumbai, India. The sole point of contact for the solicitation is Hien-Van Trinh, and the contract was issued under solicitation number SPE4A5-26-T-337T with a response deadline of August 17, 2026, and an original required delivery date of August 13, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-14PC
The contract pertains to the procurement of flat washers identified by NSN 5310015220642 and part number ISO7089-A8.4-200HV-A2L, manufactured in compliance with DIN EN ISO 7089 Revision 11/01/2000 and classified as a critical application item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any other standards including ASTM D3951. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated, and attributes are to be verified at designated levels: VII for critical, IV for major, and II for minor. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization and unit packaging strictly controlled as specified. The units are to be delivered FOB origin within 30 days of the need ship date with no tolerance for quantity variance. Two delivery lines are specified: 722 units to be shipped to Tracy, CA by September 17, 2026, and 6,733 units to be shipped to Albany, GA by July 13, 2027, both with an original required delivery date of January 31, 2027. Inspection and acceptance occur at the destination, and all documentation must reference the authorized DoD unit of issue, with corresponding ANSI X12 conversions available through the designated DLA link. The solicitation was issued under SPE4A6-26-T-14PC with a response deadline of August 17, 2026, and is managed by the Department of Defense, ASC Commodities Division.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON HEAD
Solicitation # SPE4A6-26-T-14MP
The contract specifies a single hexagon head cap screw with NSN 5305-01-652-3158, requiring delivery of exactly one unit within ten days from the contract date, delivered FOB origin. The item must comply with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and unspecified attributes are treated as major. Packaging and palletization adhere to DLA’s procurement requirements, and the item must be shipped via the fastest traceable means, excluding parcel post. The delivery destination is a U.S. Army facility in Drawsko Pomorskie, Poland, with the shipment identified by RDD 555 and project code TP 2. The contract uses the DoD unit of issue and is governed by the DLA revision in effect on the award date. The sole supplier listed is ADAMS NUT AND BOLT CO INC with part number 1WWH, though GENERAC MOBILE PRODUCTS, LLC is also identified with part number 60637. Inspection and acceptance occur at destination, with no tolerance allowed for quantity variance. All documentation and compliance are tied to solicitation SPE4A6-26-T-14MP, with an original required delivery date of July 31, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LENS, LIGHT
Solicitation # SPE4A6-26-T-14JQ
The contract is for the procurement of 12 units of LENS, LIGHT with NSN 6210012010649 under solicitation SPE4A6-26-T-14JQ, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application and must comply with MIL-PRF-22885K Revision K dated 06/26/2023 and QPL-22885-130 Revision 13 dated 12/08/2025, with packaging and marking strictly adhering to MIL-STD-2073-1E and MIL-STD-129, including the special fragile marking code 01-01. All packaging and preservation must meet DLA’s RP001 requirements and prohibit mercury or mercury compounds in preservation, packaging, and marking per IP056, though functional mercury in fluorescent lamps is permitted under strict containment standards per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are verified per designated levels. Delivery is FOB origin with a required shipment date of January 31, 2027 and a delivery window of 166 days, with no tolerance for quantity variance. The item is on a Qualified Products List, and inspection and acceptance occur at destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. The unit of issue is each, priced at $12.00 per unit, totaling $144.00, and shipping is directed to the DLA Distribution facility in New Cumberland, Pennsylvania.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-14NK
The contract specifies the procurement of 124 units of a hexagon head cap screw with NSN 5305-01-373-8720 under solicitation SPE4A6-26-T-14NK, with a required delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and compliance is mandatory based on the revision in effect on the solicitation or award date. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and attribute classifications must align with specified verification levels or AQLs. The item includes technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DLA training, and formal authorization. The contract is managed by the Department of Defense’s ASC Commodities Division with primary point of contact Ashley Jones-Turner, and responses are due by August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-14LP
The contract specifies the procurement of 11 bushings, sleeves with NSN 3120-01-680-6071 under solicitation SPE4A6-26-T-14LP, issued by the Defense Logistics Agency through the ASC Commodities Division. This is a total small business set-aside under NAICS code 332991 with a response deadline of August 17, 2026, and a delivery requirement of 951 days after contract award. Technical and quality requirements referenced in the document are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items. Item Unique Identification is not required per service customer direction. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including U.S.-based subsidiaries and employees; access is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA export control training and been formally approved. Performance is expected at Hill AFB, Utah, with primary point of contact Quentin McEachern.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-14KH
The contract is for 1,261 units of a quick release pin with NSN 5315-00-904-1662, solicited under SPE4A6-26-T-14KH with a response deadline of August 17, 2026, and a delivery requirement within 103 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA standards, and items must be physically marked as required. Non-accepted supplies must have government identification removed, and all items are subject to export control under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. Inspection and acceptance occur at the origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The place of performance is Hill AFB, Utah, and the contracting office is the ASC Commodities Division under the Department of Defense, with primary contact Ahoefa Simons De Fanti.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING UNIT, ROLLER
Solicitation # SPE4A6-26-T-14KU
The contract pertains to the procurement of 10 roller bearing units identified by part number 3871970C1 and NSN 3130015843531, issued under solicitation SPE4A6-26-T-14KU by the Department of Defense’s ASC Commodities Division. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin, and all items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled. The item must be marked with the manufacturer’s CAGE code 338X5 and part number as specified under RQ017, and the quality assurance plan B02 referenced in QAP-13873 Revision B dated December 11, 2013, governs conformance. Shipping must use the fastest traceable method, excluding parcel post, to the designated delivery point at DLA LMP Zone 1 Building 552 North in Texarkana, Texas. The required delivery date is January 16, 2026, and the item falls under NAICS code 332991 for other fabricated metal product manufacturing.
Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A6-26-T-14JX
The contract is for the procurement of electrical insulation tape, specifically 3M Scotch 33 black tape, with a unit of issue defined as a rolling unit (RO), where one RO equals 108 linear feet. A total of 30 rolling units are required, each containing tape that is 2 inches in width and 108 feet in length, conforming to commercial off-the-shelf (COTS) standards and identified by NSN 5970-00-822-1561. The item is classified as a critical application product with a non-extendable shelf life of 18 months and is not considered hazardous, eliminating the need for a Safety Data Sheet. Packaging must fully comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization must adhere to specified DLA standards. Delivery is due within 20 days FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The tape is sourced from suppliers including 3M Corp with CAGE code 76381 and Plymouth Rubber Europa SAU with part number 21004464. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation and award dates. The contract, identified as SPE4A6-26-T-14JX, is issued by the Department of Defense’s ASC Commodities Division for performance at Fort Bragg, North Carolina, with Zachary Lam as the point of contact, and has a solicitation response deadline of August 17, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-14QU
The contract is for a special-purpose electrical cable assembly with NSN/part number 5995-01-293-8899, with a quantity of 110 units to be delivered within 164 days after contract award. The item involves technical data subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution of the controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire and received explicit approval to access the data. The solicitation number is SPE4A6-26-T-14QU, posted on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 334419, and the contracting activity is the ASC Commodities Division under the Department of Defense. The place of performance is Greensboro, NC, 27409, with Lakisha Atkinson as the primary point of contact reachable via email and phone. The procurement is federally sourced with no set-aside designation.
Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14QX
The contract specifies the procurement of 6 units of PIN-RIVET with NSN 5320-01-716-0878 and part number HST12YW12-27 from HI-SHEAR CORPORATION, under solicitation SPE4A6-26-T-14QX, with a required delivery date of April 7, 2027, and a 98-day delivery window. The unit price is $6.00 per EA, totaling $36.00, with zero variance allowed in quantity. Delivery is FOB origin, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951, but must conform to higher-priority DLA Master List of Technical and Quality Requirements identified by R or I numbers, and all packing and labeling must follow MIL-STD-129. Palletization must meet DLA Packaging Requirements for Procurement (RP001), and the Unit of Issue and Quantity per Unit Pack are strictly defined. The delivery address is DLA Distribution Cherry Point, Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, with transportation governed by DLAD Proc Notes C19 and C20. The contract references the DLA Unit of Issue conversion chart and applies the DLA Master List revision in effect on the solicitation issue date. The point of contact is Debra Fowler, and the solicitation was posted August 9, 2026, with aresponse deadline of August 17, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SLOTT
Solicitation # SPE4A6-26-T-14QB
This contract outlines the procurement of a self-locking, slotted hexagon nut identified by NSN 5310-00-111-3813 and part number MS17826-10, manufactured to meet military and consensus standards including NASM25027 and MIL-STD-17826. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Quality assurance mandates sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Manufacturing must adhere to the current revision of the governing standard, and previously accepted revisions remain valid only for items produced prior to the solicitation date. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with specific packaging codes and methods detailed for protection and handling. Identification markings follow MIL-STD-130N unless otherwise stated, and physical identification requirements apply per the Qualified Suppliers List for Manufacturers and Distributors for Troop Support. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a fixed quantity of 15 units is required with no variance allowed. Delivery must occur within 107 days of contract award, with the original required delivery date set for July 23, 2027. The shipment is to be delivered to DLA Distribution Cherry Point in North Carolina, under specific transportation protocols, and the unit price is $15.00 per each, totaling $225.00. The solicitation was issued on August 9, 2026, with a response deadline of August 17, 2026, under contract number SPE4A6-26-T-14QB.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-14NM
The contract is for the procurement of 9 units of a hi-shear rivet, part number HST12YW12-23, with NSN 5320-01-716-0691, issued under solicitation SPE4A6-26-T-14NM by the Department of Defense’s ASC Commodities Division. Delivery is required within 98 days, FOB origin, with no variance allowed in quantity, and all items must be delivered to DLA Distribution Cherry Point in North Carolina. Inspection and acceptance occur at the destination, and the supplier must comply strictly with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Packaging must follow ASTM D3951, but alignment with MIL-STD-129 for marking and labeling is mandatory, and palletization must meet DLA’s packaging requirements. Sampling for quality verification is governed by MIL-STD-1916 or an equivalent zero-based plan, with specified acceptance levels: critical attributes require zero nonconformances at AQL 0.1, major at 1.0, and minor at 4.0, with unspecified attributes treated as major. The unit price is $9.00 per unit, totaling $81.00, and the supplier must adhere to all DLA transportation and shipping directives, including DLAD PROC NOTES C19 and C20. The original required delivery date is September 7, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details