Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Structural Engineering Design & Certification

Active

Federal

Response Deadline08/04/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the provision of professionally stamped engineering drawings and structural calculations for a shrink-wrap containment system, ensuring its ability to withstand wind forces and applied loads while maintaining structural integrity. This work must be performed by a qualified engineer with a Professional Engineer (PE) license to certify compliance with relevant structural standards and safety requirements. The effort is classified as a subcontract under a Small Business Set Aside, meaning only eligible small businesses may respond, and it falls under the NAICS code 541330 for engineering services. The place of performance is designated as Curtis Bay, with all deliverables expected to meet the technical and regulatory expectations of the Department of Homeland Security’s Sflc Procurement Branch 3. Proposals must be submitted by the deadline of August 4, 2026, and the solicitation is accessible through the SAM.gov platform, with no specified point of contact provided for inquiries.

General Info

PE-certified engineering drawings for shrink-wrap system at Curtis Bay, due August 4, 2026, small business set aside.

Agency

Department Of Homeland Security → Sflc Procurement Branch 3(00040)View Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Curtis Bay, MD, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 02:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 3(00040)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide PE-stamped engineering drawings and structural calculations for the shrink-wrap containment system to ensure wind and load integrity.

Similar Contracts

Same NAICS industry code

Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks third-party quality assurance support to ensure full compliance with ISO 9001:2015 standards, MIL-STD-1916 sampling procedures, and zero-defect acceptance criteria specifically for government inspection readiness. The service provider will be responsible for implementing and verifying quality control processes that align with these rigorous standards to prepare for and pass formal military and government inspections. Attention must be paid to systematic documentation, traceability, and defect prevention across all stages of production or service delivery to meet the zero-defect mandate. This is a subcontract under the NAICS code 541330, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The place of performance and specific location details are not provided, indicating flexibility in where services may be rendered as long as compliance requirements are met. Proposals must demonstrate proven experience in supporting defense-related quality systems, with clear methodologies for auditing, sampling, and defect resolution that align with federal inspection protocols. All activities must be designed to ensure uninterrupted readiness for government evaluation at any time.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 14 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 14 hours ago

DEADLINE

Architectural & Engineering Services

Solicitation # RFP-125390

The Virginia Housing Development Authority is soliciting proposals for Architectural and Engineering Services under solicitation number RFP-125390, with a response deadline of September 28, 2026. The contract is targeted at SLED entities and will be performed at 601 S. Belvidere St., Richmond, VA 23229, where all project activities and deliverables must be completed. Interested parties must submit their responses by the stated deadline to be considered for award. The contract does not specify a NAICS code or set-aside type, indicating it is open to general competition without preference for small, minority-owned, or other specialized business categories. Cheryl Price is the designated point of contact for inquiries and can be reached via email at cheryl.price@virginiahousing.com or by phone at 804-343-5723. Further details, including evaluation criteria and technical requirements, are available through the vendor portal link provided.

Virginia Housing Development Authority

POSTED

about 22 hours ago

DEADLINE

in about 2 months

27-002- GRANT WRITING/ADMINISTRATIVE & RELATED GRANT SERVICES

Solicitation # PE-72650-NONST-2027-000000044

The City of Griffin, Georgia is soliciting qualified engineering firms to provide comprehensive services for federally assisted projects, including the preparation of a Preliminary Engineering Report, final design, and construction administration. Firms must demonstrate a proven track record in supporting local governments through all phases of federally funded initiatives, ensuring compliance with federal requirements and efficient project delivery. The scope requires technical expertise in navigational federal grant frameworks and the ability to manage complex engineering tasks from concept through to construction oversight. Proposals must be submitted by September 4, 2026, and should be directed to Suzanne Partin at the City of Griffin, with inquiries handled via email at lpartin@cityofgriffin.com or phone at 470-497-3452. This solicitation, identified by PE-72650-NONST-2027-000000044, is categorized under grant writing and administrative services and is open to firms capable of delivering full-cycle engineering support for projects funded through federal dollars. All work is expected to be performed within the state of Georgia, and firms are expected to align their capabilities with the city’s objectives for infrastructure development and federal funding utilization.

City of Griffin

POSTED

about 22 hours ago

DEADLINE

in about 1 month

RFP for General Engineering Services

Solicitation # 430-13488

Grant County PUD is soliciting proposals for General Engineering Services under RFP number 430-13488, with an estimated contract value of $12 million. The opportunity is open for bidding with a submission deadline of September 2, 2026, at 4:00 PM Pacific Time, and was posted on July 30, 2026. Bidders must register and log in to access detailed bid information and submit proposals, as this is a proposal-based procurement process conducted offline. The contract is not subject to any specific set-aside classifications, and the work will be performed within the state of Washington. Primary contact for inquiries is Tom Hammond, Procurement Officer, reachable at thammond1@gcpud.org, with additional support available from Rebecca Diaz, Procurement Officer, at rdiaz@gcpud.org. The estimated value is preliminary and subject to change upon final contract determination.

Grant County PUD

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Term Engineering Services

Solicitation # RFP-125328

Alleghany County in Virginia is seeking qualified engineering service providers through a term contract solicitation titled Term Engineering Services with solicitation number RFP-125328. The solicitation was posted on July 30, 2026, and responses are due by September 10, 2026, at 7:00 p.m. This contract is intended to establish a framework for securing professional engineering services across a range of projects within the county over a defined period. The services will be performed in Alleghany County, Virginia, and the county is not specifying a set-aside type or NAICS code at this time. Interested vendors should direct all inquiries to Beverley Bowers, the designated point of contact, via email at bbowers@co.alleghany.va.us or by phone at 540-863-6650. Further details and submission guidelines are available through the vendor portal at the provided UI link.

Alleghany County

POSTED

DEADLINE

in about 1 month

The Fannin Water Association requests qualifications from qualified firms or individuals to provide engineering services for work related to the implementation of approved FY 2026 DRA project(s). You are invited to submit a proposal, in accordance with

Solicitation # 3520-20260728140427 FWA

The Fannin Water Association is seeking qualified engineering firms or individuals to provide professional services supporting the implementation of approved FY 2026 DRA projects in Mississippi. Interested parties must submit proposals by the deadline of August 20, 2026, in response to solicitation number 3520-20260728140427 FWA, with submissions required to meet all specified criteria outlined in the request. The engagement is tied to public infrastructure initiatives managed under the Mississippi Department of Finance and Administration, with work expected to occur within the state of Mississippi. While details on set-aside status or NAICS code are not provided, the opportunity is open to eligible professionals seeking to contribute technical expertise to water-related projects funded through state appropriations. Proposals must be submitted through the designated state portal by the stated deadline to be considered.

POSTED

DEADLINE

Commissioning Agent Services (Cx)The contract calls for independent commissioning services covering mechanical, electrical, and building automation systems to verify that all systems operate as designed, meet energy efficiency targets, and comply with applicable codes and standards. The work is being procured as a subcontract under the California Department of General Services, Real Estate Services Division, Project Management and Development Branch, with performance required in Sacramento, California, specifically at the 95814 zip code location. The services will ensure that newly constructed or renovated facilities achieve optimal performance through systematic testing, documentation, and coordination throughout the project lifecycle. The opportunity was posted on July 30, 2026, with a response deadline of August 20, 2026, and falls under NAICS code 541330 for engineering services. There is no designated set-aside classification, and the contract is open to eligible subcontractors responding to the solicitation. All work must align with the state’s requirements for performance, reliability, and regulatory adherence, with the commissioning agent expected to provide objective oversight from design through occupancy. Interested parties must submit proposals via the provided BidAmerica portal before the deadline.

Department of General Services (DGS), Real Estate Services Division (RESD), Project Management and Development Branch (PMDB)

POSTED

DEADLINE

Construction Project Management O Street State Parking Garage

Solicitation # 20260729048

The Contract solicitation 20260729048 for Construction Project Management services for the O Street State Parking Garage in Sacramento, California, is a qualifications-based procurement issued by the California Department of General Services, Real Estate Services Division, Project Management and Development Branch. The project involves managing a 750-space parking structure with an estimated total design-build budget of $40 million over a 29- to 32-month timeline, including 5 to 8 months of preconstruction and a 24-month progressive design-build phase. Offerors must demonstrate experience in progressive design-build delivery, sustainable building standards such as LEED, Zero Net Energy (ZNE), and Zero Net Carbon (ZNC), as well as compliance with state regulations including CEQA, Labor Code §1774 for prevailing wages, and oversight from the Division of the State Architect and State Fire Marshal. Submission requirements include a letter of interest, a three-page executive summary, Federal Form 330 for both prime and subcontractor entities, and a twelve-page project approach detailing qualifications in key areas such as cost estimating, scheduling, project management systems, regulatory compliance, quality assurance, and leadership. Proposals must be submitted electronically as a single PDF via the DGS Box.com portal by August 19, 2026, at 5:00 p.m. PDT, with no hand deliveries or email submissions accepted. Evaluation will be based on sixteen criteria including firm and key personnel experience, resource availability, ability to work with other entities, use of Big Room and Lean methodologies, commissioning agent capabilities, and project management software proficiency, though no weights or scoring thresholds are disclosed. The selection process typically involves evaluating written responses, shortlisting the top three firms for oral interviews, and then negotiating fees with the selected firm prior to award. Special contractual obligations include mandatory DIR registration for all contractors, submission of certified payroll reports, 10% retention on progress payments with escrow provisions after 60 days of delayed payment, and strict disclosures regarding use of Generative AI in deliverables. Firms must also certify they are not subject to U.S. or California economic sanctions related to Russia. Organizational conflict of interest is mitigated through a contract clause that excludes the selected firm and its affiliates from future design-build contracts for the same project. The point of contact for contractual matters is Therese Dominguez and Nora Sandstedt, while Nick Rossi handles technical inquiries. The work is to be performed entirely at

Department of General Services (DGS), Real Estate Services Division (RESD), Project Management and Development Branch (PMDB)

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 3(00040)

Same awarding agency

Debris Removal & Waste DisposalThe contract titled Debris Removal & Waste Disposal is a Small Business Set Aside under the SBA program, exclusively available to small businesses, with a NAICS code of 562111 for hazardous waste collection and treatment services. It requires full responsibility for the removal, handling, and proper disposal of all debris, scrap materials, and waste generated during installation and maintenance activities, ensuring full compliance with environmental and safety regulations. The opportunity is managed by the Department of Homeland Security through its Sflc Procurement Branch 3, with performance required at Curtis Bay, and submissions are due by August 4, 2026, at 2:00 PM, following an open solicitation posted on July 30, 2026.

Solid Waste Collection

POSTED

DEADLINE

Emergency Maintenance & Repair ResponseThis contract obligates the vendor to provide an immediate 8-hour emergency response for repairs to a shrink-wrap structure during the performance period, with all services rendered at no additional cost to the government. The requirement is part of a subcontract under a Small Business Set Aside, designated for SBA-qualified entities, and is governed by the NAICS code 238990 for other specialty trade contractors. The work must be performed at the designated place of performance in Curtis Bay, with the contract solicited by the Sflc Procurement Branch 3 under the Department of Homeland Security. The solicitation was posted on July 30, 2026, and responses are due by August 4, 2026, requiring timely submission to be considered for award.

All Other Specialty Trade Contractors

POSTED

DEADLINE

On-Site Safety Compliance & MonitoringThis contract, titled On-Site Safety Compliance & Monitoring, requires full adherence to OSHA 29 CFR 1915 standards for shipyard employment safety, including the conduct of weekly safety inspections and the consistent maintenance of necessary personal protective equipment on site. The work is to be performed at Curtis Bay, with all safety protocols rigorously enforced to ensure a secure working environment in compliance with federal regulations. The solicitation is set aside exclusively for small businesses under the SBA Total Set Aside classification, designated under NAICS code 541690 for other scientific and technical consulting services, and is managed by the Department of Homeland Security’s Sflc Procurement Branch 3. Responses must be submitted by August 4, 2026, at 2:00 PM, with the opportunity posted on SAM. gov on July 30, 2026, and no point of contact is listed for this opportunity.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Fire-Rated Shrink Wrap Material SupplyThe contract seeks the supply of fire-rated shrink wrap film engineered to meet stringent performance standards including wind resistance up to 60 miles per hour, effective moisture barrier capability, and full particulate containment. This material is intended for use in protective enclosure applications where fire safety and environmental sealing are critical. The requirement is structured as a subcontract under a Small Business Set Aside designation, ensuring exclusive eligibility for small businesses as defined by the SBA. The NAICS code 326199 indicates the performance involves other plastics product manufacturing, aligning with the specialized nature of the film production. All deliveries and performance activities are to be executed at Curtis Bay, with proposals due by August 4, 2026, at 2:00 PM, following an issuance date of July 30, 2026. The procuring entity is the SFLC Procurement Branch 3 under the Department of Homeland Security, indicating the material will support mission-critical federal operations requiring high reliability and regulatory compliance.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Fireproof Shrink-Wrap Containment Structure Fabrication & InstallationA fireproof shrink-wrap containment structure must be designed, fabricated, and installed over a 30-foot by 30-foot equipment access door on an existing Big Top structure located in Curtis Bay. The enclosure must be engineered to endure wind speeds up to 60 miles per hour while effectively containing blast media, dust, and paint overspray to ensure environmental and safety compliance. The project falls under a Small Business Set Aside designation and is classified under NAICS code 238990, indicating it is a subcontract opportunity reserved for small businesses. The solicitation was posted on July 30, 2026, with a hard deadline for responses set for August 4, 2026, at 2:00 PM. The contracting activity stems from the Department of Homeland Security’s Sflc Procurement Branch 3, with performance required on-site at the Curtis Bay location.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Shrink Wrapping Services for 87' Coast Guard Patrol Boat

Solicitation # 70Z04026Q60005

The U.S. Coast Guard, through the Surface Forces Logistics Center, is soliciting quotes for the construction of an enclosure for equipment door under solicitation number 70Z04026Q60005, issued as a combined synopsis and solicitation in accordance with FAR Subpart 12.6. This is a Firm Fixed Price Purchase Order with no advance or down payments, and vendors must assume full financial responsibility until the work is delivered, accepted, and received by the Coast Guard. Payment will be processed via Government Purchase Order on a Net 30 basis, with invoices required to be submitted through the IPP system and containing specific details including PO number, vendor invoice number, CAGE code, item description, unit price, and extended totals. Shipping costs of $100 or more require a separate freight invoice. The solicitation is a Small Business Set-Aside under NAICS code 561910 and will be awarded on a best value basis, evaluating technical compliance, adherence to deadlines, and price. Past performance is considered only for responsibility determination. All quotes must be emailed to Kenneth Palmer by August 4, 2026, at 10:00 AM Eastern, with the solicitation number in the subject line. Drawings referenced in the Statement of Work must be included, certified by a professional engineer, and are subject to review by Coast Guard Structural and Safety departments; access to some drawings may require JCP registration due to export controls. Performance is to occur at the U.S. Coast Guard Yard in Curtis Bay, Maryland, with an estimated performance window of September 14–18, 2026. Vendors must comply with multiple FAR clauses, including those regarding telecommunications equipment, Kaspersky Lab restrictions, DEI discrimination prohibitions, and representation certifications for commercial items. Site visits must be scheduled by contacting Keith Hare.

Packaging and Labeling Services

POSTED

DEADLINE

DETACHABLE LINK 1.5 INCH MARQUIP W/O HAIRPIN

Solicitation # 70Z04026Q60006

The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotes for 16 detachable links measuring 1.5 inches, manufactured to MIL-L-2710B specifications, without hairpins, with full certification packages including material, tensile, NDT, hardness, proof test, and break certifications. This is a Firm Fixed Price Purchase Order under FAR Part 12, with no down payments or advanced payments permitted; vendors must fund the order entirely until delivery and acceptance by the Coast Guard, with payment processed via Government Purchase Order within Net 30 days upon approval by the Contracting Officer. Quotes must be submitted by August 10, 2026, at 2:00 PM Eastern time via email to Kenneth Palmer at kenneth.t.palmer@uscg.mil, with the solicitation number clearly stated in the subject line. Only responsible sources may respond, and the award will be based on best value, evaluating technical compliance, schedule adherence, and price. Past performance is assessed solely for responsibility determination. Required engineering drawings must be included and will be reviewed by Coast Guard structural and safety personnel; access to some drawings may be restricted under export controls, requiring JCP registration. All invoices must be submitted through IPP.gov with proper PO details, cage number, and line item information, and shipping costs over $100 require a separate freight invoice. The order is subject to multiple FAR clauses covering telecom restrictions, Kaspersky prohibitions, DEI nondiscrimination, and other statutory requirements. The place of performance is the U.S. Coast Guard Yard at Curtis Bay, Maryland, and this solicitation is designated as a Small Business Set Aside under NAICS code 332510.

Hardware Manufacturing

POSTED

DEADLINE

Logistics Coordination & Reverse Shipping ManagementThe contract entails comprehensive logistics coordination for the inbound and outbound movement of engines associated with U.S. Coast Guard assets under government-managed shipping protocols. Responsibilities include scheduling transport, maintaining real-time tracking of shipments, and ensuring accurate documentation compliance for all cargo movements, with a focus on reverse shipping procedures to support asset recovery and return logistics. The work is specifically tied to federal operations and requires strict adherence to security and regulatory standards governing the handling of military and coast guard equipment. Performances will be centered at Curtis Bay, Maryland, with the North American Industry Classification System code 488510 indicating specialized freight transportation arrangement services. This is structured as a subcontract under the Department of Homeland Security’s Sflc Procurement Branch 3, meaning the awardee will operate in a supporting role within a larger federal supply chain framework. The contract’s launch date is listed as July 28, 2026, and its location and scope suggest long-term operational integration with U.S. Coast Guard maintenance and logistics infrastructure at the Curtis Bay facility.

Freight Transportation Arrangement

POSTED

DEADLINE

OEM Technical Data Licensing & Support ServicesThe contract grants authorized access to Cummins proprietary technical manuals, software diagnostics, and engineering support services specifically for the validation of repairs and guidance during complex overhauls. This license ensures that only approved entities can utilize critical technical data and tools essential for maintaining the integrity and performance of Cummins-engineered systems, with strict controls on usage and dissemination to protect intellectual property. The scope is narrowly focused on ensuring technical compliance and operational accuracy in repair and overhaul procedures. The contract is classified as a subcontract under NAICS code 541690, issued by the Department of Homeland Security through its SFLC Procurement Branch 3, with performance centered in Curtis Bay, Maryland, ZIP code 21226. It was posted on July 28, 2026, and does not indicate a set-aside designation. Access to the full solicitation details is available through the SAM.gov portal, though no point of contact or additional procurement identifiers are provided in the data. The agreement is structured to facilitate high-level technical support while maintaining security and compliance with federal contracting protocols.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Engine Packaging & Crating for ShipmentThe contract requires the design and fabrication of specialized protective crating for repaired marine diesel engines, ensuring safe intermodal transport by safeguarding against moisture, vibration, and impact damage during transit. The crating must be engineered to meet rigorous environmental and mechanical protection standards, tailored to the unique size, weight, and sensitivity of marine diesel engines. All materials and construction methods must be selected to withstand prolonged exposure to varied climates and handling conditions across multiple transportation modes. The work is scoped as a subcontract under the Department of Homeland Security’s Sflc Procurement Branch 3, with performance required at Curtis Bay, Maryland, 21226. The NAICS code 312230 indicates classification under Wood Container and Pallet Manufacturing, suggesting an emphasis on custom wood-based protective packaging solutions. The posting date of July 28, 2026, indicates this opportunity is anticipated for future award, and the absence of a solicitation number suggests it may be initiated directly under an existing framework. Participation requires compliance with federal procurement standards and capability to deliver fully assembled, ready-to-ship crates that meet operational and logistical requirements for secure, long-distance engine transport.

Tobacco Manufacturing

POSTED

DEADLINE

Dynamometer Testing & Performance ValidationThe contract requires the execution of load-based performance testing using dynamometer equipment to validate the post-repair functionality of engines, with a focus on verifying output power, fuel efficiency, and operational stability under controlled conditions. All testing must be conducted in accordance with established protocols, and comprehensive formal test reports must be prepared and submitted to document results, ensuring transparency and compliance with performance benchmarks. Testing activities are to be performed at the designated place of performance in Curtis Bay, Maryland, 21226, under the oversight of the Department of Homeland Security’s Sflc Procurement Branch 3. The contract is classified as a subcontract under NAICS code 541380, indicating it falls within the scope of scientific and technical consulting services. While no specific set-aside or solicitation details are provided, the work is time-sensitive, with the contract posted on July 28, 2026, and requires precise execution to meet validation requirements without deviation from specified technical standards.

Testing Laboratories and Services

POSTED

DEADLINE

Diesel Engine Inspection & Repair ServicesThe contract requires comprehensive inspection, disassembly, failure analysis, and repair of Cummins QSC 8.3 marine diesel engines with the objective of restoring them to Fully Mission Capable Condition B status. All work must be executed to precise technical standards to ensure reliability and performance in operational marine environments. The scope encompasses full lifecycle servicing from initial diagnostic evaluation through component-level repair and final reassembly, with strict adherence to required performance benchmarks. Performance is designated for Curtis Bay, Maryland, with a zip code of 21226, and the contract falls under the NAICS code 811111 for automotive repair and maintenance. It is classified as a subcontract under the Department of Homeland Security, specifically managed by the Sflc Procurement Branch 3. The work must be completed in accordance with mission-critical timelines and technical specifications to meet readiness requirements, with no flexibility in achieving the stated Condition B restoration objective.

General Automotive Repair

POSTED

DEADLINE