Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

STUD ASSEMBLY, TURNLOCK FASTENER

Active
SPE4A6-26-R-XC88Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 4,050 units of Stud Assembly Turnlock Fasteners under National Stock Number 5325-00-859-3779. The contract requires a delivery timeline of 141 days after the order is placed. Interested parties must submit their responses by September 8, 2026. The agreement mandates strict adherence to DLA packaging, technical, and quality requirements, specifically referencing RP001, RA001, RQ011, and RQ017. These standards cover the master list of technical requirements, the removal of government identification from non-accepted supplies, and specific physical identification and bare item marking protocols. The applicable revision of these requirements is determined by the solicitation or RFP issue date.

General Info

DoD procurement of 4,050 turnlock fasteners due 141 days after September 8, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

339993 - Fastener, Button, Needle, and Pin ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

SPE4A626RXC88.PDF

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
JEFFREY BROWN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
STUD ASSEMBLY,TURNLOCK FASTENER RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
THE PROCUREMENT AGENCY HAS DATA ADEQUATE FOR NSN/Part Number: 5325-00-859-3779 Quantity: 4,050 EA Delivery: 141 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339993
New
DIBBS
GROMMET, NONMETALLIC
Solicitation # SPE4A6-26-T-21KW
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-21KW, is for the procurement of one nonmetallic grommet, identified by NSN 5325-01-563-9419. The contract requires delivery within five days after receipt of order and specifies performance in Groton, Connecticut. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including CMMC Level 2 certification and specific packaging and marking standards. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data. Inspection and acceptance will occur at the origin.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 339993
New
DIBBS
PIN, SHOULDER, HEADED
Solicitation # SPE4A5-26-Q-0719
This contract, identified as solicitation SPE4A5-26-Q-0719, is a firm fixed price agreement for the procurement of one headed shoulder pin, part number 5143T00P01 from General Electric Company. The item is identified by NSN 5315-01-711-1733 and must be delivered within 144 days after the order is placed. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination. The supplier must adhere to strict quality and packaging standards, including the DLA Master List of Technical and Quality Requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331. The shipment is destined for the Naval Air Systems Command at Patuxent River, Maryland, and must be sent via the fastest traceable means rather than parcel post.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
SLED
Professional Cosmetology Tools and Equipment SupplyThe Professional Cosmetology Tools and Equipment Supply subcontract involves the procurement of professional-grade tools for use in cosmetology labs. The scope of supply includes essential equipment such as clippers, shears, trimmers, nail drills, and styling irons specifically intended for student use. Managed by the Instructional Programs agency in New York, the opportunity was posted on August 23, 2026. Interested parties must submit their responses by the deadline of November 2, 2026. The contract is categorized under NAICS code 339993.
Instructional Programs

POSTED

2 days ago

DEADLINE

in 2 months
View Details
NAICS: 339993
New
DIBBS
PIN, GROOVED, HEADED
Solicitation # SPE4A6-26-T-21NR
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of four grooved headed pins identified by NSN 5315-01-702-4427. The procurement is managed under solicitation number SPE4A6-26-T-21NR and is categorized as a federal solicitation. The bidding process is scheduled to begin with a posting date of August 23, 2026, and requires all responses to be submitted by the deadline of August 31, 2026. Interested parties can access further details and manage their submissions through the official DIBBS procurement portal.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-21NL
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of four Quick Release Pins, identified by NSN 5315-01-558-6101. The procurement is categorized as a federal solicitation under the identification number SPE4A6-26-T-21NL. The solicitation was posted on August 23, 2026, with a formal response deadline established for August 31, 2026. Interested parties can access further details and manage their responses through the official DIBBS procurement portal.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-21MW
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of four Quick Release Pins, identified by NSN 5315-00-080-4741. The procurement is managed under solicitation number SPE4A6-26-T-21MW and is categorized as a federal solicitation. The request was posted on August 23, 2026, with a formal response deadline established for August 31, 2026. Interested parties can access further details and submit documentation through the official DIBBS procurement portal.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-21SM
This federal solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of a single headed straight pin identified by NSN 5315-01-624-9834. The procurement is tracked under solicitation number SPE4A6-26-T-21SM and is categorized as a formal request for a specific hardware component. The solicitation was posted on August 23, 2026, with a designated response deadline of August 31, 2026. Interested parties must submit their responses through the official DIBBS procurement portal to be considered for the contract. This requirement is part of the agency's ongoing efforts to supply essential hardware components for defense-related operations.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-21JK
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of 187 units of headed straight pins, identified by NSN 5315-00-515-2898. The procurement is tracked under purchase request 7017940149 and solicitation number SPE4A6-26-T-21JK. This federal contract opportunity is categorized as a solicitation for hardware components required for defense logistics. Interested parties must adhere to the established timeline, as the solicitation was posted on August 23, 2026, with a response deadline set for August 28, 2026. The procurement process is managed through the Defense Internet Bid Board System, and all submissions must be completed by the specified cutoff date to be considered for the award.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 339993
New
DIBBS
STUD, TURNBUTTON FASTEN
Solicitation # SPE4A6-26-T-21PP
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks to procure 5,302 units of turnbutton fasten studs, identified by NSN/Part Number 5325-00-055-7451. The procurement is managed under solicitation number SPE4A6-26-T-21PP and is categorized as a federal solicitation. Interested parties must submit their responses by the deadline of August 31, 2026, following the posting date of August 23, 2026. The contract is being processed through the DLA's procurement systems to fulfill specific defense requirements for these fastening components.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
DIBBS
COVER, VISOR, FLYER'S
Solicitation # SPE1C1-26-T-1649
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of 20 units of Flyer's Visor Covers, identified by NSN 8475-01-542-2671. The procurement is managed under solicitation number SPE1C1-26-T-1649 and is categorized as a federal solicitation. The request was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties must submit their responses through the official DIBBS procurement portal to be considered for this requirement.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-21RK
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of three Quick Release Pins, identified by NSN 5315-01-009-7344. The procurement is managed under solicitation number SPE4A6-26-T-21RK and is categorized as a federal solicitation. The request was posted on August 23, 2026, with a response deadline set for August 31, 2026. Interested parties can access further details and submit documentation through the official DIBBS procurement portal. This contract is intended to fulfill specific logistical requirements for defense-related hardware.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 339993
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-21PT
This solicitation is for a Pin, Straight, Headed with NSN/part number 5315-01-016-5658, issued by the Defense Logistics Agency under the Department of Defense. The purchase request quantity is 4 units, and the solicitation number is SPE4A6-26-T-21PT. It is a federal procurement action with no set-aside information provided, and the relevant solicitation was posted on August 23, 2026. Responses are due by August 31, 2026, at 17:00 UTC. The contract data does not list a NAICS code, point of contact, or place of performance details, and the office location information is also not specified beyond being in the USA. The solicitation can be accessed through the DLA DIBBS link provided in the contract data.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials & Mercury Compliance Consulting
Environmental Consulting Services

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & Inspection Services (Third-Party)
Engineering Services

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 423840
New
DIBBS
Defense-Compliant Packaging and Marking Services
Industrial Supplies Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
Precision Manufacturing of Threaded Screw Inserts (NSN 5325-01-117-3826)
Precision Turned Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, SEAL
Solicitation # SPEA46-26-R-XC29
This contract is a firm fixed price solicitation issued by the Department of Defense ASC Commodities Division for the procurement of 1,331 seal washers, identified by NSN 5310-01-536-7944. The item is designated as a critical application item and must be free of asbestos as defined in FED-STD-313. Delivery is required within 108 days after order, with inspection and acceptance occurring at the destination and shipping terms set as FOB origin. The supplier must adhere to strict packaging and labeling standards, specifically ASTM D3951 and MIL-STD-129, while following the DLA Packaging Requirements for Procurement. All technical and quality requirements are governed by the DLA Master List, which takes precedence over general packaging standards. The contract also specifies the removal of government identification from any non-accepted supplies and references specific part numbers associated with AM General LLC and Mobile Climate Control Corp.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 332721
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-R-XC89
This contract is a firm fixed price solicitation for the procurement of 2,900 threaded screw inserts, identified by NSN 5325-01-117-3826. The requirement is a total small business set-aside under NAICS code 332721, with a delivery timeline of 279 days after the order is placed. Inspection and acceptance are both set at the point of origin, and the items must adhere to specific technical data packages and military specifications, including MIL-DTL-45932. The agreement mandates strict compliance with DLA technical and quality requirements, including CMMC Level 2 self-assessment and specific packaging standards. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, and all marking and palletization must follow MIL-STD-129 and DLA procurement guidelines.
Precision Turned Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
LEAD, ELECTRICAL
Solicitation # SPE4A6-26-R-XC91
This solicitation is for the procurement of 500 units of electrical lead, identified by NSN 6150-00-395-2862, under a firm fixed price contract. The item is classified as a critical application commercial item and must be manufactured by a source listed on the Qualified Products List for MIL-P-7788. Technical specifications are governed by MIL-DTL-83413/8F and related reference documents. The contract requires strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001. Quality assurance will be managed through sampling methods per MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Delivery is required within 163 days after order, with inspection and acceptance occurring at the destination. This opportunity is designated as a total small business set-aside under NAICS code 335999.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 14 days
View Details
NAICS: 541611
New
DIBBS
CMMC Level 2 Compliance and Cybersecurity Assessment
Administrative Management and General Management Consulting Services

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 385100
New
DIBBS
Military-Compliant Packaging and Marking

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) Services
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 335139
New
DIBBS
Indicator Light Manufacturing & Assembly
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PIN, SHOULDER, HEADLE
Solicitation # SPE4A6-26-T-21SZ
This solicitation is for the procurement of 10 headless shoulder pins under contract number SPE4A6-26-T-21SZ for the Department of Defense ASC Commodities Division. The delivery requirement is 20 days after receipt of order, with the place of performance located in Keyport. The procurement is governed by DLA packaging requirements and technical quality standards found in the DLA Master List, with sampling methods adhering to MIL-STD-1916 or ASQ H1331. The contract includes strict security and regulatory compliance mandates, including CMMC Level 2 certification and the protection of covered defense information. Due to the nature of the technical data, the item is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details