Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

sUAS Supply and Integration

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply and integration of a commercially available small Unmanned Aircraft System (sUAS) platform designed for military applications, with specific compatibility requirements for LiDAR payloads. The system must be capable of supporting mission-critical reconnaissance, mapping, and environmental sensing tasks under operational conditions, ensuring seamless integration with existing military systems and payload technologies. Deliverables include the sUAS hardware, associated control systems, software interfaces, and integration services to enable reliable LiDAR data collection and transmission in field environments. The contract is classified as a subcontract under NAICS code 334519, with responses due by July 31, 2026, and was posted on July 22, 2026. Performance is designated for San Antonio, Texas, with the Department of Defense through the office FA8051 772 Ess Pkd as the contracting entity. The requirement emphasizes commercial-off-the-shelf solutions that meet rigorous military standards for durability, range, endurance, and operational effectiveness, without custom development. All submissions must demonstrate proven capability, compliance with technical specifications, and readiness for immediate deployment in supported missions.

General Info

Supply and integrate commercially available sUAS with LiDAR for military reconnaissance and mapping in San Antonio, Texas.

Agency

Department Of Defense → FA8051 772 Ess PkdView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

San Antonio, TX, 78226, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8051 772 Ess Pkd
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA8051 772 Ess Pkd
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply and integration of a commercially available small Unmanned Aircraft System (sUAS) platform compatible with LiDAR payloads for military use.

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
DIBBS
Precision Manufacturing of Control Dial UnitsThe contract entails the precise manufacture and delivery of 33 military-specification control dial units identified by NSN 5355-01-324-4564, with stringent requirements for quality assurance and quality control throughout the production process. Full traceability of materials, components, and manufacturing steps is mandatory, ensuring adherence to MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for labeling and marking standards. All units must meet exacting military performance and durability specifications without deviation, and documentation must accompany each lot to verify compliance at every stage. The work is classified as a subcontract under NAICS code 334519, indicating specialized manufacturing of other communication equipment, and is managed by the Department of Defense's Land Supply Chain organization. The solicitation opened on July 24, 2026, with a firm deadline for responses set for July 29, 2026, leaving a narrow window for qualified manufacturers to submit proposals. There is no set-aside designation specified, meaning eligibility is open to all qualified suppliers regardless of business size or status. Performance location details are not provided, implying flexibility in manufacturing site selection as long as all deliverables meet the required standards and timelines. Access to the full solicitation details is available through the DIBBS portal using the provided link, and all submissions must align with the Defense Logistics Agency’s procedural requirements for military procurement. Delivery timelines and inspection protocols are implied to be governed by the referenced military standards, with non-compliance resulting in rejection of the entire lot.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
DIBBS
THERMOMETER, INDICATINGThe contract issued under solicitation number SPE4A6-26-T-07BM by the ASC Commodities Division of the Department of Defense seeks three indicating capillary tube thermometers with bulb, identified by NSN 6685-01-253-0784 and manufacturer part number 90C01-6383. Delivery is required 97 days after order placement, with a need ship date of October 30, 2026, and shall be made FOB origin to the designated receiving facility in Tracy, California. The item is classified as a critical application item, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point, with full compliance required to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a special designation indicating “Delicate instrument.” The packaging must adhere to DLA’s RP001 requirements and explicitly prohibit the use of mercury or mercury compounds in preservation, packaging, and marking, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents—all of which must include a secondary containment boundary per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; acceptance criteria require zero non-conformances unless otherwise specified. Attributes are to be assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The contractor must comply with extensive regulatory requirements including DFARS 252.223-7001 for hazardous material labeling, applicable OSHA Hazard Communication standards, and mandatory electronic submission via WAWF for payment and receiving reports. All offers must be submitted electronically through the DIBBS portal, and the acquisition falls under simplified procedures with no bidset available. Compliance with FAR clauses on trafficking, employment eligibility, sustainable products, cybersecurity, mercury prohibition, whistleblower rights, small business representation, and prohibited procurement from communist Chinese military companies is mandatory. The contractor must also provide safety data sheets, adhere to unique entity identifier and CAGE code requirements, and ensure all hardware avoids unintended contact with mercury, except as explicitly permitted under strict containment protocols.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
DIBBS
GAGE, PRESSURE, DIAL INDThe contract is for the procurement of 13 units of a pressure dial indicating gage, identified by NSN 6685012372558 and manufacturer part number EA24-3PPP-EWB0, under solicitation SPE4A5-26-T-292Y, with a total contract value of $169.000 at $13.000 per unit. Delivery is scheduled for 158 days after the order date, with a required ship date of December 30, 2026, and FOB origin terms. The item must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and RP001 DLA Packaging Requirements, including preservation method 10 (clng/dry:1), unit container E5, outer protective item M, and pack code U. All items must be marked in accordance with MIL-STD-129, including a special marking code of 05 for delicate instruments and a temporary tag affixed to each unit that displays the contract number, NSN, manufacturer’s part number, and rated accuracy, if available. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in such cases, portable devices must include a second boundary of containment as per NAVSEA 5100-003D. Sampling and quality acceptance follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements. The contractor must comply with cybersecurity and safeguarding provisions including 252.204-7012 and 252.240-7997, and must use Wide Area WorkFlow (WAWF) for invoicing. Contract clauses cover payment, changes, inspection, default, safeguarding of information, and prohibition of unauthorized obligations, with
ASC SUPPLIER OPER OEM DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 334519
New
DIBBS
METER, FLOW RATE INDThe contract pertains to the procurement of one flow rate indicator meter with NSN 6680-01-398-1885 under solicitation SPE4A6-26-T-06ZQ, issued by the ASC Commodities Division of the Department of Defense for delivery to Whiteman Air Force Base, Missouri. Delivery is required within 20 days after award, with FOB origin terms placing responsibility on the contractor for packaging, labeling, and transportation to the point of origin, where title and risk transfer to the government. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which override applicable industry standards like ASTM D3951 where conflicts arise. Packaging and marking must adhere to MIL-STD-129, including barcoding, hazard labeling per OSHA’s Hazard Communication Standard, and adherence to RP001 for DLA-specific packaging. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise specified, and assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. The supplier must comply with DFARS and FAR clause deviations effective February 2026, including cybersecurity requirements under NIST SP 800-171, prohibitions on covered defense telecommunications, hazardous material reporting, and restrictions on hexavalent chromium. Electronic invoicing through Wide Area Workflow (WAWF) is mandatory, and all subcontracting activity for commercial products or services must follow deviation-included clauses. Offerors must provide valid UEI and CAGE codes and affirm representations regarding small business status, socioeconomic eligibility, and compliance with trafficking, employment eligibility, and sustainable product requirements. All proposals must be submitted electronically via DIBBS by the deadline specified, in alignment with the DLA Master Solicitation Revision 105, and must include completed representations, certifications, and technical documentation. The contract includes no options, extended pricing, or defined contract value beyond the single line item at $1.000, and administrative details such as payment office, COR, or DoDAAC will be finalized upon award.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → FA8051 772 Ess Pkd

Same awarding agency

NAICS: 327320
New
Federal
Airfield Damage Repair (ADR) Material Kitting & LogisticsThe United States Air Force, through the Headquarters Air Force Civil Engineer Center, is conducting market research via a Sources Sought announcement to identify qualified contractors capable of supporting the Airfield Damage Repair (ADR) Program with the supply, kitting, storage, and global delivery of specialized construction materials, including rapid-setting cement and pelletized asphalt. This effort aims to establish a potential five-year Indefinite Delivery Indefinite Quantity (IDIQ) contract for the procurement of ADR material kits and individual components, with the first delivery order not anticipated until late FY2027. The primary NAICS code for this requirement is 327320 (Ready Mix Concrete Manufacturing), with a small business size standard of 500 employees. Contractors must be registered in the System for Award Management (SAM) prior to any potential award. The Government is not obligated to award a contract nor reimburse any costs incurred in responding to this announcement, and no evaluation results will be provided. Respondents are required to submit a detailed capability statement of no more than 15 single-spaced pages, addressing a comprehensive set of questions covering manufacturing capabilities, supply chain transparency, compliance with the Buy American Act, logistics expertise for door-to-door delivery to austere and remote global locations, adherence to DFARS requirements for U.S.-flagged ocean vessels, quality assurance processes, kitting and packaging procedures, asset tracking, laboratory testing readiness, and surge capacity to fulfill large-scale, firm-fixed priced delivery orders ranging from $5 to $20 million with lead times up to 330 days. Additional documentation must demonstrate experience with federal supply systems, National Stock Numbers, Combatant Commander requirements, and the use of WAWF for invoicing and DD Form 250 submissions. The Government requires full traceability of material origins, compliance with CDRL deadlines—including prototype kit delivery within 150 days—and the ability to produce detailed AutoCAD or SolidWorks drawings. Proposals must be submitted electronically by 1630 Central Time on July 31, 2026, to designated points of contact, with questions due by June 29, 2026. Compliance with packaging standards to prevent damage during rough transport and liability for in-transit damage are mandatory. All submissions must follow strict formatting, naming conventions, and security protocols, especially concerning export-controlled or hazardous material data.
Ready-Mix Concrete Manufacturing

POSTED

4 days ago

DEADLINE

in 5 days
View Details
NAICS: 541611
New
Federal
Compliance and Certification Documentation SupportThis contract seeks support in preparing regulatory compliance documentation to meet Federal Acquisition Regulation, Defense FAR Supplement, National Defense Authorization Act, and Department of Defense supply chain security requirements. The work involves assisting with the development, coordination, and submission of compliance materials necessary to adhere to complex federal and defense contracting standards, ensuring alignment with mandated security and sourcing protocols. The subcontract opportunity is open to qualified vendors who can demonstrate expertise in navigating defense regulatory frameworks and producing accurate, audit-ready documentation under tight timelines. The solicitation was posted on July 22, 2026, with a response deadline of July 31, 2026, and is tied to a Department of Defense activity operating under the office code FA8051 772 Ess Pkd. Performance is expected to occur in San Antonio, Texas, with a ZIP code of 78226. The contract falls under NAICS code 541611, which classifies it as management consulting services, indicating the focus is on advisory and procedural compliance support rather than product provision. No set-aside designation is specified, meaning the opportunity is open to all eligible contractors without preference based on small business or other categories.
Administrative Management and General Management Consulting Services

POSTED

5 days ago

DEADLINE

in 5 days
View Details
NAICS: 334511
New
Federal
LiDAR Sensor and Payload IntegrationThe contract seeks the supply and integration of a high-resolution LiDAR sensor onto a small unmanned aircraft system platform for advanced geospatial data collection purposes. The sensor must be fully compatible with the sUAS payload architecture, ensuring seamless operation, precise data acquisition, and reliable performance under varied environmental conditions. Integration requirements include mechanical mounting, power and data interface compatibility, real-time telemetry support, and software synchronization with onboard flight control systems to enable mission-critical mapping and surveying applications in military and defense environments. Performance must occur in San Antonio, Texas, with delivery and integration completed by the response deadline of July 31, 2026. The contract is classified as a subcontract under NAICS code 334511, indicating involvement in the manufacturing of navigation, measuring, electromedical, and control instruments. The acquiring entity is the Department of Defense through the office designated as FA8051 772 Ess Pkd, which implies a defense-specific application involving situational awareness, terrain modeling, or infrastructure assessment. All technical submissions must align with stringent DoD standards for sensor accuracy, data security, and system durability to support operational readiness and mission success.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

5 days ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
Federal
Small Unmanned Aircraft System (sUAS) Light Detection and Ranging (LiDAR) SystemThe United States Air Force, through the 772 Enterprise Sourcing Squadron, is conducting market research to assess industry capability to provide a single EchoOne small Unmanned Aircraft System (sUAS) equipped with Light Detection and Ranging (LiDAR) technology or an equivalent system meeting specified performance requirements. This sources sought notice is for informational purposes only and does not constitute a solicitation, request for proposal, or any binding commitment from the Government. Respondents are not guaranteed a contract, will not receive evaluations or feedback, and will not be reimbursed for costs incurred in submitting information. All responses must be submitted electronically to the designated points of contact by the deadline of July 31, 2026, and must not exceed ten pages in length using Times New Roman font size 12 or equivalent. Submissions must include company details, SAM registration information, business size classification, confirmation of compliance with prohibitions on Chinese military-linked components and security exclusions, and a detailed capability statement addressing whether the requirement aligns with commercially available systems. The NAICS code 334519 applies, with a small business size standard of 600 employees, and contractors are encouraged to suggest alternative classifications with justification. A draft salient characteristics document outlines the technical expectations for the system, and any proposed equivalent must meet all minimum criteria listed therein. Only submissions that are complete, within page limits, and free of marketing materials such as brochures or catalogs will be reviewed. Past performance on similar federal, state, or local contracts must be disclosed, including contract numbers and roles as prime or subcontractor. Participation in GSA Schedule or other government-wide acquisition vehicles should be noted with relevant contract numbers or contact information. The Air Force may reach out to select respondents for clarification, but no formal award will result from this notice.
Other Measuring and Controlling Device Manufacturing

POSTED

5 days ago

DEADLINE

in 5 days
View Details