Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Subcontractor for Small Business Set-Aside Opportunities

Active

Federal

Response Deadline08/22/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Small businesses are invited to act as subcontractors on opportunities set aside specifically for their participation, focusing on discrete tasks including design, testing, documentation, and component supply under the NAICS code 541690. This is a subcontracting opportunity under the Department of Defense, managed by the FA8507 Alcmc Eskc office, with performance required in Warner Robins. The solicitation was posted on June 24, 2026, and responses must be submitted by August 22, 2026, at 4:00 PM Eastern Time. While the specific type of set-aside is not detailed, the structure ensures eligibility is restricted to small businesses, providing them a targeted avenue to engage in defense-related work without competing against larger firms. Interested parties must access the opportunity through the provided SAM.gov link for full submission details and requirements.

General Info

Small businesses may subcontract on DoD tasks in Warner Robins under NAICS 541690, with bids due August 22, 2026.

Agency

Department Of Defense → FA8507 Alcmc EskcView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Warner Robins, GA, USA

Set-Aside

NONE

Documents

This scope was carved out of FA8507_RFCBA_SourcesSought.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Radio Frequency Calibration Backplane Assembly (RFCBA)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 24

subcontract

Response DeadlineAug 22

Submission deadline

Response Deadline

08/22/2026, 04:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8507 Alcmc Eskc

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8507 Alcmc Eskc

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Opportunity for small businesses to perform discrete portions of work such as design, testing, documentation, or component supply under set-aside arrangements.

Similar Contracts

Same NAICS industry code

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # C2305

The Elsinore Valley Municipal Water District (EVMWD) is soliciting proposals for the Corydon Well Replacement Project, which involves the professional design, bidding support, and engineering services required to replace and abandon the existing Corydon well in Wildomar, California. The project is divided into two primary phases: Phase 1 focuses on civil site design, technical specifications, and construction management for the drilling of the new well and abandonment of the old one; Phase 2 covers the architectural, civil, mechanical, structural, electrical, and instrumentation design for equipping, testing, and commissioning the new groundwater production well. The project is funded through District funds and a Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, necessitating compliance with federal requirements, including the Build America Act, Buy America Preference, and the use of the Automated Standard Application for Payments (ASAP) system. TKE Engineering, Inc. is seeking qualified DBE, MBE, and WBE firms specializing in hydrology/hydraulic consulting, structural and electrical engineering, geotechnical investigation, and utility potholing. Proposals are due by 10:00 a.m. on September 1, 2026, via the PlanetBids Vendor Portal. Selection is based on demonstrated competence and professional qualifications, with evaluation weighted toward relevant experience (25%), project approach (25%), and scope/schedule (20%), while cost and innovation each account for 10%. The total estimated project cost is 2,260,788 dollars, though the final contract will be a negotiated not-to-exceed dollar limit. Awardees must adhere to strict federal and state regulations, including whistleblower protections, drug-free workplace standards, and specific insurance and bonding requirements for contracts exceeding the simplified acquisition threshold.

TKE Engineering, Inc.

POSTED

about 3 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Material Compliance & Safety Data Management

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Quality Assurance & Inspection ServicesThe Department of Defense, through the ASC Commodities Division, is seeking a subcontractor for Quality Assurance and Inspection Services. The primary objective of this contract is to perform third-party inspection and sampling in accordance with MIL-STD-1916 or ASQ H1331 to ensure product conformance prior to delivery. This opportunity is categorized under NAICS code 541690 and will be performed in Jacksonville, Florida. Interested parties must submit their responses by August 24, 2026, following the posting date of August 16, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThis subcontract opportunity with the Department of Defense Fluid Handling Division involves the preparation and submission of Safety Data Sheets and hazard labels for metallic tubing. The primary objective is to ensure full compliance with OSHA HAZCOM, DFARS, and MIL-STD-129 marking requirements. The project is categorized under NAICS code 541690 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by August 27, 2026, following the posting date of August 16, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and SDS Preparation

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThis subcontract opportunity with the Department of Defense ASC Commodities Division involves the preparation of hazard warning labels and Material Safety Data Sheets for hazardous materials utilized in manufacturing or packaging. The work must be performed in strict accordance with OSHA HCS and MIL-STD-129 standards to ensure full regulatory compliance. The project is based at Tinker AFB, zip code 73145-8000, and falls under NAICS code 541690. Interested parties must submit their responses by the deadline of August 24, 2026, following the posting date of August 16, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Labeling and Compliance Services

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & LabelingThis subcontract opportunity with the Department of Defense Fluid Handling Division focuses on the provision of hazard warning labels and Material Safety Data Sheets to ensure full compliance with OSHA and DFARS requirements. The work is categorized under NAICS code 541690 and will be performed at Tinker AFB, Oklahoma. The solicitation was posted on August 16, 2026, with a response deadline of August 27, 2026. Interested parties can find further details and submission instructions through the provided DIBBS link.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Export-Controlled Technical Data Handling (ITAR/EAR)This subcontract, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, focuses on the secure handling, access control, and compliance of ITAR and EAR-controlled technical data. The scope of work includes implementing rigorous training and recordkeeping protocols and ensuring strict adherence to the US/Canada Joint Certification Program. The project will be performed at Tinker AFB, zip code 73145-8000, under NAICS code 541690. Interested parties must submit their responses by the deadline of August 24, 2026, following the posting date of August 16, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Packaging, Marking, and Hazard Communication Compliance

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Identification and SDS Management

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8507 Alcmc Eskc

Same awarding agency

Radio Frequency Power 18:1 Divider/Combiner

Solicitation # FA8507_RFPDC_SourcesSought

The United States Government is conducting market research to identify qualified sources capable of qualifying and producing an S-Band Radio Frequency Power 18:1 Divider/Combiner (RFPDC), with a potential requirement for up to six units of each configuration, including development, production, delivery, installation, and testing. The effort, identified under solicitation FA8507_RFPDC_SourcesSought and NAICS code 334418, is managed by the Air Force Life Cycle Management Center at Robins Air Force Base in Georgia, and responses are due by August 22, 2026. This notice is strictly for informational purposes and does not constitute a solicitation, offer, or commitment under FAR 15.201(e); no funds are available for response preparation, and all submissions become Government property with no reimbursement provided. Respondents must submit an unclassified technical capabilities statement via email, limited to 30 pages, including business name, address, Cage Code, DUNS number, company representative details, and business size classification, with proprietary information minimized and clearly marked. While no set aside decision has been made, small businesses are encouraged to respond thoroughly and may indicate teaming arrangements, joint ventures, or subcontracting plans to meet the full requirement, including evidence of partnerships to demonstrate collaborative capability. The Government may use responses to shape future acquisition strategies and is particularly interested in identifying any work that could be exclusively reserved for small businesses. First-article testing will occur at the manufacturer’s facility, followed by potential operational installation and testing on a 27-meter radar at an overseas location, with production contingent upon successful 30-day testing. Security clearance levels and foreign participation requirements remain undetermined, but contractors should anticipate collaboration with military, civilian, and multi-agency personnel. Responses must be submitted electronically without classified material, phone calls, or faxes, and all inquiries should be directed in writing to the designated Contracting Officer and Lead System Engineer.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 7 hours ago

DEADLINE

Digital Backplane Assembly

Solicitation # FA8507_DPA_SourcesSought

The United States Government, through the Air Force Life Cycle Management Center’s Electronic Systems Group - Kesselring (AFLCMC/ESGK-R), is conducting market research to identify qualified sources capable of designing, developing, producing, and testing up to three Digital Backplane Assemblies (DBAs) as a direct Form, Fit, and Function (FFF) replacement for an existing component specified in engineering drawing B3864294-1. This initiative, identified under solicitation number FA8507_DPA_SourcesSought and NAICS code 334418, is strictly a sources sought announcement under FAR 15.201(e) and does not constitute a solicitation, request for proposal, or binding commitment by the Government. No funds are available for response preparation, and no contract award will result from this notice. Respondents are expected to submit a comprehensive capabilities package not exceeding 30 pages, including a completed Contractor Capability Survey, a full Technical Data Package with native CAD/CAE/CAM files and 2-D PDF drawings, a description of similar past performance, proposed contract structure such as Firm Fixed Price with CLINs, and an assessment of program risks. The Government requires unlimited data rights to all technical documentation and explicitly prohibits proprietary data reservations. All submissions must be unclassified, emailed directly to designated contracting officers, and received no later than August 22, 2026. The place of performance is Warner Robins, Georgia, with key activities including first-article testing at the contractor’s facility and 30-day operational testing at an overseas radar site. Security clearance requirements and foreign participation levels are undetermined, but contractors must be prepared to collaborate with military, civilian, and international partner personnel. Small businesses are strongly encouraged to respond, and while no set-aside decision has been made, the Government will evaluate small business responses to inform future acquisition strategies. Teaming arrangements, joint ventures, and subcontracting partnerships are encouraged, and respondents are asked to provide supporting documentation such as letters or emails detailing roles and responsibilities. Contractors must include their CAGE code and DUNS number, and may propose alternative NAICS codes or size standards. The Government will use all submitted information to shape its acquisition approach, which remains undetermined, and while no formal evaluation factors or award criteria have been established, respondents must address capability, past performance, risk identification, and technical compliance with the TDP. Proprietary information must be clearly marked, though the Government assumes

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 months ago

DEADLINE

Radio Frequency Calibration Backplane Assembly (RFCBA)

Solicitation # FA8507_RFCBA_SourcesSought

The United States Government is conducting market research to identify qualified sources capable of designing, qualifying, and producing S-Band Radio Frequency Calibration Backplane Assemblies (RFCBAs) referenced by engineering drawings B5088485-1 and B5088485-2. The requirement seeks up to six units per configuration for replacement of an existing Full Functionality Filler, with operation in the 2–4 GHz frequency range. The RFCBA must undergo first-article testing at the contractor’s facility and subsequent 30-day operational validation on a 27-meter radar system located OCONUS. Full technical data rights are mandatory, requiring deliverables in native CAD/CAE/CAM formats and 2-D PDFs without proprietary restrictions. Responses are limited to a 30-page capabilities statement package and must include company information, CAGE Code, Unique Entity ID, technical capability details, teaming or subcontracting arrangements with supporting documentation, and risk mitigation strategies. Small businesses are strongly encouraged to participate, with the government evaluating responses to determine if a set-aside is appropriate, though no decision has yet been made. Teaming arrangements and joint ventures are encouraged, and respondents should specify any work they believe should be exclusively reserved for small businesses. Responses are due by August 22, 2026, and must be submitted electronically via email to designated contracting officers; fax, phone, or portal submissions are not accepted. The notice explicitly states this is not a solicitation, no funds are available for response preparation, and the government holds no obligation to award a contract. The anticipated contract type is Firm Fixed Price with CLINs, though final structure remains undetermined. Security requirements and foreign participation levels are unestablished, but contractors must anticipate collaboration across military, civilian, and interagency teams under strict protection of proprietary information under 41 USC 423. All submitted information becomes Government property, and compliance with the Technical Data Package specifications and unlimited data rights is non-negotiable. The performance location is primarily Warner Robins, Georgia, with potential field operations overseas, and no packaging, marking, or preservation standards are specified since this is pre-solicitation research. Questions must be directed in writing to the designated contracting and technical points of contact, and no formal evaluation factors exist at this stage as the goal is solely to inform future acquisition planning.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 months ago

DEADLINE

Receive Microwave (And Associated Power Supplies)

Solicitation # FA8507_ReceiveMicrowave_SourcesSought

The United States Government, through the Air Force Life Cycle Management Center at Robins Air Force Base, Georgia, is conducting market research to identify capable sources for the qualification and production of X-Band Receive Microwave Assemblies and associated power supplies, including the replacement of obsolete components with Fit, Form, and Function equivalents. The effort involves the delivery of up to ten RMAs, four low noise amplifier power supplies, and four RMA power supplies, accompanied by a complete 100% Technical Data Package in native CAD/CAE/CAM and 2-D PDF formats, with unlimited data rights and no proprietary restrictions. First-article testing must be conducted at the contractor’s facility, followed by a 30-day operational validation on a 27-meter radar at an overseas location prior to full-scale production. Contractors must be prepared to work within a complex team environment that includes military, civilian, and partner agency personnel, and must clearly mark any proprietary information to avoid forfeiture of rights. Responses are limited to a 30-page capabilities statement and must include company size status, CAGE and DUNS codes, past performance, and any proposed teaming or subcontracting arrangements supported by documented evidence, though such arrangements are not mandatory. The solicitation number is FA8507_ReceiveMicrowave_SourcesSought, with a response deadline of August 22, 2026, and responses must be submitted exclusively via email to designated contracting and technical contacts. This notice is strictly for market research purposes under FAR 15.201(e), with no obligation to award a contract, no funds available for response preparation, and no solicitation documents issued to date. The NAICS code is 334511, with a small business size standard of 1,350 employees, and small businesses are specifically encouraged to respond; the government will analyze responses to determine if a set-aside or preference is warranted, including potential division of work into exclusive small business opportunities. While no formal evaluation factors, contract types, or pricing details are established, the Government is considering a Firm-Fixed Price contract structure and invites proposers to suggest optimal CLIN and contract type configurations. All submitted information becomes Government property, and no confidentiality or return of materials is guaranteed. Security requirements and foreign participation guidelines remain undetermined but are expected to be restrictive, requiring contractors to anticipate close collaboration with multiple U.S. government entities.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 months ago

DEADLINE

Technical Data Package (TDP) Development and DocumentationThe contract requires the development and delivery of complete Technical Data Packages (TDPs) in native CAD, CAE, and CAM formats alongside 2-D PDFs that fully comply with Department of Defense standards and grant unlimited data rights. The deliverables must be technically accurate, thoroughly documented, and structured to support full lifecycle management of defense systems, ensuring seamless integration, manufacturing, and sustainment in accordance with strict government requirements. All data must be provided in unencrypted, non-proprietary formats that enable unrestricted use, modification, and distribution by the government without limitations. This is a subcontract under a Department of Defense procurement activity managed by FA8507 Alcmc Eskc, with the place of performance located in Warner Robins. The solicitation was posted on June 24, 2026, and responses are due by August 22, 2026, at 4:00 PM. The North American Industry Classification System code 541490 indicates this effort falls under other scientific and technical consulting services, encompassing specialized engineering documentation and data management. Subcontractors must possess proven experience in DoD-compliant data package development and the technical capability to produce and validate complex digital engineering deliverables within the imposed timeline and quality requirements.

Other Specialized Design Services

POSTED

about 2 months ago

DEADLINE

OCONUS Installation and Field Testing SupportTechnical personnel will be deployed to an undisclosed overseas location to install RFCBA units on a 27-meter radar system and perform a 30-day operational test period. The work is part of a subcontract under the Department of Defense, specifically managed by FA8507 Alcmc Eskc, with the primary place of performance listed as Warner Robins, though the actual installation and testing will occur abroad. The contract falls under NAICS code 238990, indicating it involves other construction-related services not elsewhere classified, and is open for response until August 22, 2026. All activities must be completed in compliance with international and military operational requirements, with no specified set-aside status for small or disadvantaged businesses.

All Other Specialty Trade Contractors

POSTED

about 2 months ago

DEADLINE

First Article Testing (FAT) Services – RF Performance ValidationThe contract seeks qualified vendors to perform first article testing on RFCBA prototypes at the manufacturer’s facility, focusing on validating RF performance, signal integrity, and environmental resilience under operational conditions. Testing must meet stringent technical benchmarks to ensure the prototypes function as intended in real-world scenarios, with all results documented and submitted for review. The work is classified as a subcontract under NAICS code 541330, indicating specialized engineering and technical services, and is sponsored by the Department of Defense through the FA8507 Alcmc Eskc office, with performance centered in Warner Robins. Proposals must be submitted by August 22, 2026, at 4:00 PM, with no set-aside provisions specified, leaving the opportunity open to all eligible contractors. The absence of a point of contact or detailed location beyond the city suggests that further communication will be initiated through the SAM.gov portal after submission. While no funding amount or contract duration is provided, the scope implies a focused, high-priority validation effort critical to advancing defense-related RF component development. Contractors must demonstrate proven capability in RF testing, environmental stress evaluation, and compliance with defense-grade technical standards.

Engineering Services

POSTED

about 2 months ago

DEADLINE

High-Frequency PCB Manufacturing and AssemblyThe contract requires the manufacture and assembly of high-frequency printed circuit boards specifically for RFCBA units, with strict adherence to impedance control and RF shielding standards. The work involves integrating both custom-designed and commercial off-the-shelf components, demanding precision in material selection, layer stacking, and signal integrity to ensure optimal RF performance. All processes must meet military-grade specifications for reliability and environmental resilience under demanding operational conditions. Performance is scheduled to take place in Warner Robins, with a response deadline of August 22, 2026. Classified under NAICS code 334418 for electronic component and product manufacturing, the agreement is structured as a subcontract under the Department of Defense, specifically managed by the FA8507 Alcmc Eskc office. The scope demands full compliance with advanced RF electronics standards and includes rigorous quality assurance protocols to support mission-critical applications.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 2 months ago

DEADLINE

RF Backplane Design and Reverse EngineeringThe contract requires the reverse engineering of legacy RF calibration hardware to produce complete technical data packages for two distinct S-Band RF Cabin Boot Assembly configurations, with unlimited data rights granted to the government. This effort involves dissecting existing hardware to thoroughly document design, function, materials, and manufacturing processes to recreate or support future production without reliance on original vendor documentation. The work is technical and precise, demanding deep expertise in RF systems, calibration methodologies, and reverse engineering practices to ensure full functional equivalence and compliance with military-grade performance standards. The contract is structured as a subcontract under the Department of Defense, specifically managed by FA8507 Alcmc Eskc, with performance centered in Warner Robins. It falls under NAICS code 334511, indicating classification in the communications equipment manufacturing sector. The solicitation was posted on June 24, 2026, with responses due by August 22, 2026. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors. The deliverables must encompass comprehensive documentation sufficient to support full lifecycle support, including assembly, testing, and maintenance, with unrestricted data rights ensuring the government can freely use, modify, reproduce, and disclose the technical data without limitations.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 months ago

DEADLINE

Reverse Engineering of Obsolete ComponentsThe contract requires the reverse engineering of obsolete microwave and power supply components to maintain compliance with Federal Funding Requirements for Federal Contracts, ensuring that substituted parts meet all technical, performance, and regulatory standards. This effort includes full documentation of the reverse engineering process, component testing, and validation procedures, with the ultimate goal of obtaining approval from U.S. Government authorities for each replacement part. The work must be completed in alignment with strict defense industry specifications and is focused on sustaining legacy systems that rely on these now-unavailable components. The contract is a subcontract under the Department of Defense, specifically managed by the FA8507 Alcmc Eskc office, with performance centered in Warner Robins. It falls under NAICS Code 541330 for engineering services and has a deadline for responses on August 22, 2026. While no set-aside designation is specified, the emphasis on technical precision, government approval, and defense system continuity underscores the critical nature of the work. All substituted components must be fully vetted and documented to ensure operational continuity and regulatory compliance without disruption to mission-critical systems.

Engineering Services

POSTED

about 2 months ago

DEADLINE

First Article & Field Testing SupportThe contract requires execution of first-article testing at the manufacturer’s facility followed by 30 days of field testing on a 27-meter radar system at an overseas location prior to production release. This effort is critical for validating system performance under operational conditions and ensuring readiness for full-scale manufacturing. The testing sequence is designed to confirm technical specifications, reliability, and functionality in an OCONUS environment, with the manufacturer responsible for comprehensive documentation and support throughout both phases. The work is classified as a subcontract under NAICS code 541370, with the Department of Defense as the overarching agency through the FA8507 Alcmc Eskc office. The performance location is specified as Warner Robins, though the field testing component occurs internationally. Proposals must be submitted by August 22, 2026, with no set-aside provisions indicated. The contract's success hinges on seamless coordination between the manufacturer’s testing team and operational personnel at the remote site, ensuring all data collected meets DoD standards for system acceptance.

Surveying and Mapping (except Geophysical) Services

POSTED

about 2 months ago

DEADLINE

Technical Data Package (TDP) Development & DocumentationThe contract requires the creation and delivery of comprehensive Technical Data Packages for all RMA and power supply components, with deliverables including native CAD, CAE, and CAM files alongside 2-D PDF drawings. These packages must be furnished with unlimited data rights, ensuring the government holds full, unrestricted use, reproduction, and dissemination rights to all technical data provided. The work is tied to the NAICS code 541330, indicating engineering services, and is issued under the Department of Defense through the FA8507 Alcmc Eskc office, with performance required in Warner Robins. The solicitation was posted on June 24, 2026, with a response deadline of August 22, 2026, at 4:00 PM, indicating a competitive subcontract opportunity under a federal procurement process. The place of performance is clearly identified, though no point of contact or set-aside details are provided, suggesting the award may be open to any qualified vendor without preference. The requirement emphasizes technical precision and data completeness, reflecting a high-stakes environment where accurate and accessible documentation is critical to sustaining and supporting defense-related components.

Engineering Services

POSTED

about 2 months ago

DEADLINE