Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Submarine Ventilation System Cleaning and Inspection Services

Active

Federal

Response Deadline11/13/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Submarine Ventilation System Cleaning and Inspection Services involves performing specialized maintenance on the forward ventilation systems of Department of Defense Virginia Class Submarines in Groton, Connecticut. The scope of work includes the inspection of ventilation ducting and components, the removal of contaminants and debris, and the delivery of detailed inspection reports. All activities must be conducted in accordance with Navy maintenance standards. The project requires the use of industrial cleaning equipment and borescopes, with a specific requirement for personnel to hold confined space entry certification. This opportunity is categorized under NAICS code 238220 and is managed through the Department of Defense. Interested parties should note the response deadline of November 13, 2026.

General Info

DoD subcontract for Virginia Class submarine ventilation cleaning and inspection in Groton, Connecticut.

Agency

Department Of Defense → Supply Of Shipbuilding Groton

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

CT

Set-Aside

NONE

Documents

This scope was carved out of N6278927Q0003.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Dry Ice Cleaning and Inspection of Forward Ventilation System onboard Virginia Class Submarine

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 13

Submission deadline

Response Deadline

11/13/2026, 12:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Supply Of Shipbuilding Groton

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Supply Of Shipbuilding Groton

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs inspection and cleaning of the forward ventilation system for prime contractors on Department of Defense Virginia Class Submarine projects in Groton, CT. Inspects ventilation ducting and components, removes contaminants and debris from system sections, and operates within confined spaces per Navy maintenance standards. Utilizes borescopes and industrial cleaning equipment. Requires confined space entry certification. Delivers cleaned systems and inspection reports.

Similar Contracts

Same NAICS industry code

Install Pier D High Pressure Air System, NSBREM-724-A

Solicitation # N4425527RB003

Solicitation N4425527RB003 is a design-build project for the installation of a permanent high pressure air (HPA) system at Pier D, B724A of Naval Base Kitsap in Bremerton, Washington. The scope of work includes the design, construction, and commissioning of the system, specifically incorporating the existing HPA cross connection into a system supplied by compressors on the south end of Pier D. The project requires the installation of HPA shore risers at five specific locations: East bollards 11, 59, and 101, and West bollards 47 and 59. All new piping must be installed under service grates with valves located topside. The project must adhere to stringent Unified Facilities Criteria (UFC), ASME, and Navy design codes, with the most stringent requirement governing in the event of discrepancies. This is a 100% set-aside for 8(a) businesses located within SBA Region X, with an estimated construction magnitude between 1 million and 5 million dollars. The contract is a firm-fixed-price task order under an 8(a) Multiple Award Construction Contract (MACC), with a period of performance of 538 calendar days from award. Award will be based on price and MACC past performance. Key requirements include compliance with EM 385-1-1 safety standards, strict base access and security protocols via the BAVR system, and the provision of a bid guarantee of 20% of the bid price or 3 million dollars, whichever is less. Proposals must be submitted through the PIEE portal by December 1, 2026.

Bristol Alliance of Companies

POSTED

about 3 hours ago

DEADLINE

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and related check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. Additionally, the contractor must provide a hydro pneumatic expansion tank, 3 inch Type L copper piping with copper sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220 and is managed by primary point of contact Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

about 3 hours ago

DEADLINE

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is soliciting bids for solicitation CBP#9772, a fixed-price, single lump sum subcontracting opportunity to provide HVAC Air Handling Unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work involves the thorough cleaning of twelve AHUs and twenty-eight coils across the Kilmer and Edison dormitories, including the cleaning of associated supply, return, and outside-air ductwork and air distribution components. The contractor is responsible for conducting pre-cleaning inspections, documenting existing conditions with photographs, and installing durable, gasketed permanent access panels to facilitate maintenance. The estimated contract value ranges from $100,000 to $250,000, with a performance period of 90 consecutive business days following a written Notice to Proceed. Bids are due by November 17, 2026, and will be awarded based on overall best value. Mandatory requirements for consideration include a physical site visit, a completed pricing schedule, and a bid bond guarantee of 20% for bids equal to or greater than $25,000. Performance and payment bonds from a surety company with at least an A- rating are also required for contracts exceeding $25,000. The opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Awardees must comply with Davis-Bacon prevailing wage determinations for Middlesex County, FAR regulations regarding small business utilization and federal funding transparency, and strict government guidelines for protecting sensitive information. Final acceptance is contingent upon a Center inspection and the submission of a comprehensive final project report.

Edison Job Corps

POSTED

about 3 hours ago

DEADLINE

CBP7787 ED1 RM 123 HVAC Compressor Replacement

Solicitation # CBP7787 ED1 RM 123

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the Sierra Nevada Job Corps Center in Reno, Nevada. The project, identified as CBP7787 ED1 RM 123, has an estimated price range between 0 and 25,000 dollars. The scope of work is divided into four phases: preparation and environmental safety, including refrigerant recovery per EPA Section 608 regulations; demolition and removal of the failed unit; installation of an OEM-specified compressor and associated components; and system testing and commissioning. Bids will be evaluated based on overall best value, and a physical site visit is mandatory prior to submission. The opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Contractors must provide a detailed cost breakout and comply with Construction Wage Rate Requirements and FAR 52.222-4 for contracts exceeding 2,000 dollars. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from an A- rated surety company. Required documentation includes a Unique Entity ID, SF 1413 form, and proof of general liability insurance of at least 1,000,000 dollars and worker's compensation insurance with employer's liability limits of 500,000 dollars. Final payment is subject to a 10 percent retainage, released upon successful final inspection and approval of closeout documents.

Sierra Nevada Job Corps Center

POSTED

about 3 hours ago

DEADLINE

MJCC Multiple HVAC Replacement System

Solicitation # mjcc-multiple-hvac-replacement-system

Education & Training Resources (ETR) is seeking quotes for a subcontracting opportunity to perform the turnkey replacement of multiple HVAC systems at the Montgomery Job Corps Center in Montgomery, Alabama. The scope of work involves the removal of existing equipment and the installation, testing, and commissioning of new units across several buildings, including specific requirements for units ranging from 3.5 to 10 tons. Technical specifications include the use of R-454B refrigerant, Energy Star certification, and minimum EER ratings of 16 for certain units. All work must comply with the National Electrical Code, NFPA Standard No. 101, and OSHA regulations. The project requires a 5-10 year warranty on parts and a 2 year warranty on workmanship, with final payment contingent upon a signed punch list and warranty submission. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must provide a current SAM.gov UEI number, active registration, Alabama business licenses, a W-9, and an FFATA form. Submissions must include a completed bid sheet with a detailed cost breakdown, certificates of insurance, and a proposed performance schedule. Award selection is at the sole discretion of ETR and is not automatically granted to the lowest bidder. Compliance with the Davis-Bacon Act for prevailing wages is mandatory, and bonding requirements apply based on project value, with 100 percent performance and payment bonds required for projects exceeding 150,000 dollars. Bids are due by November 27, 2026, at 12:00 PM CST.

Montgomery Job Corps Center

POSTED

about 3 hours ago

DEADLINE

Joliet Job Corps-Request for Quote HVAC Replacement Female Dormitory

Solicitation # joliet-job-corps-request-quote-hvac-replacement-female-dormitory

Management and Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace ten furnace and air conditioning systems at the Joliet Job Corps Center female dormitories in Illinois. The project includes the removal and disposal of existing units, the installation of ten new Carrier HVAC systems, and the integration of a Pelican Building Automation System across eleven units. The estimated contract value ranges from $250,000 to $500,000. Bids must be submitted to Frances McGraw by November 23, 2026, and must include a detailed cost breakout, a signed bid form, and a completed supplier self-certification packet. A physical site visit and signature on the attendance roster are mandatory prerequisites for bid submission. Award decisions will be based on overall best value. For bids of $25,000 or more, contractors must provide a bid bond equal to 20 percent of the base bid and subsequently provide performance and payment bonds from a surety company with at least an A- rating. The project is subject to the Davis-Bacon Act, requiring compliance with specific Illinois prevailing wage rates and the display of employee rights posters. Required insurance includes general liability of at least $1,000,000 per occurrence and worker's compensation with employer liability limits of $500,000. Performance dates will be established during a pre-construction meeting following the issuance of a Notice to Proceed.

Joliet Job Corps

POSTED

about 3 hours ago

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This solicitation, managed by PTSI Managed Services Inc., involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the installation of electrical power, control interface connections, and chilled water piping, as well as the final start-up of the equipment. The project is estimated to have a construction magnitude between 250,000 and 500,000 dollars. The opportunity is set aside for various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Primary NAICS codes associated with the project include 238220, 238210, and 238290. Interested parties must submit their responses by the deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

about 3 hours ago

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves the demolition and removal of existing distribution piping and air compressors, followed by the installation of new infrastructure to eliminate leaks and prevent equipment short-cycling in the Men's Dormitory, Women's Dormitory, and Recreation Building. All work must be completed within 30 consecutive business days from the Notice to Proceed and must adhere to NFPA 25 standards and local, state, and national codes. Bids are due by December 1, 2026, and must include a base bid and detailed cost breakout. A physical site visit and signature on the attendance roster are mandatory for bid consideration. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required at submission, and performance and payment bonds from an A-rated surety must be provided within five business days of an Intent to Award. The contract is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses. Award decisions will be based on overall best value and bidder responsiveness. The contractor must comply with prevailing wage rates per the Davis-Bacon Act, submit weekly certified payroll reports, and adhere to FAR regulations regarding small business utilization and the protection of government interests. Final payment is contingent upon the submission of a Notice of Final Completion, release of liens, and the delivery of two sets of operation and maintenance manuals. Liquidated damages of $100 per consecutive calendar day will be applied for incomplete or unsatisfactory work.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 3 hours ago

DEADLINE

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for a subcontracting project at the Glenmont Job Corps Center in Glenmont, New York. The scope of work involves the removal and disposal of four existing 505-gallon domestic hot water storage tanks and the installation of four new 500-gallon insulated storage tanks, with two tanks per dormitory. Additionally, the contractor must replace four heat exchangers and install one new bronze Bell and Gossett circulator pump in the North Dormitory. Comprehensive associated services include piping modifications, electrical disconnections and reconnections, insulation, rigging, and the provision of a temporary hot water heater to ensure the facility remains operational during the estimated construction period of two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60 percent), quality (20 percent), past performance (10 percent), and schedule (10 percent), meaning the lowest price does not guarantee selection. Contractors must comply with New York State statutory requirements for Workers Compensation and Employers Liability Insurance, as well as Davis-Bacon prevailing wage requirements. Required submission documents include a current W-9, a completed Vendor Questionnaire with UEI and NAICS codes, New York State licenses, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

about 3 hours ago

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty failed ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The scope of work includes the removal and off-site disposal of the damaged units and the installation of new Bosch 1-ton units or an equivalent model. The installation must encompass all necessary ducting, electrical work, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must perform critical safety upgrades by installing smoke dampers with fusible links in all vents leading into the plenum and ensuring all installed plenum materials are plenum rated. All work must comply with NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This project is set aside for small businesses, including certified veteran, service-disabled veteran, women-owned, and HUBZone small businesses. It is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission of weekly certified payroll reports for invoice approval. Proposals exceeding 100,000 dollars will require 100 percent payment and performance bonding upon award. Qualified respondents must be licensed, certified, and insured, providing a detailed technical approach, cost breakdown for labor and materials, equipment cut sheets, and warranty information. Final project completion requires the delivery of operation manuals to the Facility Manager.

Career Systems Development Corporation

POSTED

about 3 hours ago

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the necessary new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and possess an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 6, 2026.

Exeter Job Corps

POSTED

about 3 hours ago

DEADLINE

in about 22 hours

Inland Empire Job Corps-Request for Quote HVAC Replacement Cafeteria & OA CTS

Solicitation # inland-empire-job-corps-request-quote-hvac-replacement-cafeteria-oa-cts

Management & Training Corporation (MTC), acting as the operator for the U.S. Department of Labor, is seeking bids for a fixed-price, single lump sum subcontract to replace packaged HVAC units with gas heating at the Inland Empire Job Corps Center in San Bernardino, California. The project focuses on the Cafeteria and OA/CTS areas and includes the removal of existing units, EPA-compliant refrigerant recovery, installation of new high-efficiency units, and necessary modifications to gas piping, ductwork, and electrical disconnects. The estimated contract value ranges from $25,000 to $100,000. Bids must be submitted by November 23, 2026, and require a mandatory physical site visit and a 20% bid bond for quotes of $25,000 or more. Award decisions will be based on overall best value. Successful contractors must provide performance and payment bonds from a surety company with at least an A- rating and comply with Construction Wage Rate Requirements, paying prevailing wages as specified in General Decision CA20260026. Required submissions include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, a W-9, and supplier self-certification. The project mandates strict adherence to OSHA safety standards, including 30-hour annual training and the provision of personal protective equipment. Administrative requirements include the use of AIA documents G702 through G709 for invoicing and compliance with FAR clauses regarding first-tier subcontractor information and the Buy American Act.

Inland Empire Job Corps

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → Supply Of Shipbuilding Groton

Same awarding agency

Dry Ice Cleaning and Inspection of Forward Ventilation System onboard Virginia Class Submarine

Solicitation # N6278927Q0003

The Department of Defense, through the Supply Of Shipbuilding Groton office in Connecticut, is soliciting a combined contract under solicitation number N6278927Q0003 for the inspection and cleaning of sections of the forward ventilation system onboard a Virginia Class Submarine. This requirement falls under NAICS code 336611. The solicitation was posted on November 4, 2026, with a response deadline of November 13, 2026. Primary and secondary points of contact for this effort are Stephanie Neale and Andrea Cook. Special contract requirements include specific labor and pay mandates. A 4 percent hazard pay differential is applicable for employees in positions representing a low degree of hazard when working near ordnance, explosives, or incendiary materials. Contractors must provide required uniforms at no cost to employees or reimburse them for the actual cost. Additionally, in accordance with Executive Order 13706, employees subject to the Service Contract Act must receive one hour of paid sick leave for every three hours worked, capped at 56 hours per year. Labor classifications for employees not listed in the wage determination must be designated as either Classification A or B based on their responsibility for their own safety.

Ship Building and Repairing

POSTED

about 14 hours ago

DEADLINE

Weapons Shipping Harness Refurbishment Blanket Purchase Agreement

Solicitation # N6278927Q0001

Solicitation N6278927Q0001 is a request for quotes to establish a multiple award Blanket Purchase Agreement (BPA) for the refurbishment of SSN 688 class weapon shipping harnesses to support waterfront submarines at SUBASE New London in Groton, Connecticut. The scope of work includes the complete disassembly, refurbishment of all parts, reassembly, NDT testing, painting, and weight testing of these safety-critical tactical handling gear in accordance with NAVSEA specifications and strict naval nuclear safety standards. The BPA will have a five-year period of performance from January 27, 2027, to January 26, 2032, with a total ceiling of 500,000 USD and a per-call limit of 100,000 USD. Individual requirements will be competed among BPA holders based on the most advantageous quote. Awards will be made based on best value, evaluating technical qualifications and the ability to meet schedules, past performance, and price. Offerors must provide at least three references from the last three years and a description of their property management system. The procurement is not a small business set-aside and is limited to sources capable of meeting specialized military design and safety standards. Quotations are due by 4:00 PM EST on December 3, 2026, and must be submitted electronically. Contractors are required to use the Wide Area Workflow system for invoicing and must comply with CMMC cybersecurity requirements and SAM registration.

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Technical Support and Maintenance ServicesThe contract provides ongoing technical support and maintenance for a hardwired cable TV system located in secure government facilities in Groton, Connecticut. Services encompass comprehensive troubleshooting, prompt signal restoration, replacement of faulty hardware, and direct user support to ensure uninterrupted operation of the TV system within sensitive environments. The work is classified as a subcontract under NAICS code 541512, indicating it falls under other computer-related services, and is managed under the Department of Defense through the Supply Of Shipbuilding Groton organization. Performance is exclusively tied to the Groton area with a ZIP code of 06340, and the contract was posted on June 22, 2026, with no set-aside provisions specified. All activities must comply with the security requirements inherent to federal government installations.

Computer Systems Design Services

POSTED

DEADLINE

Cable Box Hardware SupplyThe contract requires the supply of 24 commercial-grade, hardwired-only cable set-top boxes specifically designed to be compatible with Comcast Business infrastructure, intended for deployment within classified government facilities. These devices must meet stringent security and operational standards to ensure reliable performance in sensitive environments, with no wireless or Bluetooth capabilities to prevent unauthorized data transmission. The hardware must be fully hardwired, compliant with federal security protocols, and capable of seamless integration with existing Comcast Business systems without introducing vulnerabilities. The procurement is structured as a subcontract under the Department of Defense, administered by the Supply Of Shipbuilding Groton office, with performance taking place in Groton, Connecticut, ZIP code 06340. The North American Industry Classification System code 334310 identifies the procurement as relating to consumer electronics manufacturing, indicating the supplier must have proven experience in producing certified, enterprise-grade equipment for high-security applications. The solicitation was posted on June 22, 2026, and while no set-aside designation is specified, the nature of the end use implies strict eligibility requirements for contractors, including cleared facilities and personnel to handle government-secure infrastructure.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Hardwired Cable TV Installation and ActivationThe contract involves the physical installation, termination, and activation of 24 hardwired cable TV boxes across two secured government facilities located in Groton, Connecticut, with a zip code of 06340. The scope includes the full lifecycle of cable television deployment: running cabling, terminating connections, testing signal integrity, and integrating the systems with Comcast’s existing infrastructure to ensure operational readiness. All work must comply with the stringent security protocols inherent to government facilities, and the installation must be completed without disrupting existing operations. The project falls under NAICS code 238220, which classifies it as electrical and other construction-related services, and it is structured as a subcontract under the Department of Defense’s Supply Of Shipbuilding Groton division. Performance is strictly limited to the specified location, and while no set-aside designation is provided, the work demands specialized technical expertise and adherence to military-grade security standards.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Travel and Personnel Logistics for InstructorsLincoln Electric instructors based in Cleveland, OH will be coordinated for travel to Groton, CT for a four-day training event, with all logistics including airfare, lodging, per diem, and ground transportation managed under this subcontract. The work is performed in support of the Department of Defense through Supply Of Shipbuilding Groton, with the place of performance located in Groton at ZIP code 06340. The contract falls under NAICS code 561510, indicating it relates to travel arrangement and reservation services, and was posted on June 17, 2026. All expenses and arrangements must be compliant with federal travel regulations and tailored to ensure seamless movement and accommodation for the instructors during the training period.

Travel Agencies

POSTED

DEADLINE

On-Site Training Facility and Logistics SupportAn industrial facility in Groton, Connecticut, will be provided to support technical training programs with dedicated welding bays, comprehensive ventilation systems, robust power infrastructure, and dedicated classroom spaces. The facility is intended for on-site training activities and logistical support, designed to meet the operational needs of technical workforce development in the shipbuilding sector. This subcontract, classified under NAICS code 531120 for real estate rental and leasing, is associated with the Department of Defense through the Supply Of Shipbuilding Groton organization, with performance exclusively located in the 06340 ZIP code area. The contract was posted on June 17, 2026, and is structured to ensure the availability of a fully functional, purpose-built environment supporting hands-on technical education and training initiatives.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

Training Materials and Equipment SupplyThe contract is for the supply of Lincoln Electric-branded welding training kits, guns, torches, consumables, and safety gear to support a four-day technical course scheduled in Groton, Connecticut. The equipment is intended for hands-on instructional use during the training program and must meet industry standards for performance and durability. The materials are to be delivered and made available at the course location in Groton, zip code 06340, ensuring full operational readiness for all participants. This subcontract falls under the NAICS code 335313, which pertains to the manufacturing of electrical and wiring equipment, indicating the specialized nature of the products being procured. The contracting entity is the Department of Defense through its organization Supply Of Shipbuilding Groton, reflecting a defense-related training initiative. The contract was posted on June 17, 2026, and is focused solely on providing the necessary tools and protective gear to facilitate effective technical instruction without additional services or support beyond equipment delivery and setup.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Protective Packaging and Preservation for ShipmentThis contract entails providing specialized protective packaging, crating, and preservation services aimed at preventing corrosion and damage during the transportation of stanchions. The shipment will move from Brookfield to Groton, Connecticut. The services are intended to ensure the secure handling and protection of these materials throughout their transit. Issued under the Department of Defense's Supply of Shipbuilding Groton agency, the subcontract falls under NAICS code 532490, which relates to equipment rental and leasing services. While specific solicitation details and points of contact are not provided, the contract emphasizes the importance of safeguarding the shipment to maintain the integrity of the stanchions upon arrival in Groton.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

Supply of Corrosion-Resistant Fasteners and HardwareThis contract involves the supply of specialized marine-grade fasteners and hardware specifically designed for the assembly of submarine safety rail stanchions. The materials must meet stringent durability and corrosion resistance standards to ensure reliability and safety in demanding marine environments. The procurement falls under NAICS code 332996 and is managed by the Department of Defense through the Supply Of Shipbuilding Groton office. The subcontract opportunity was posted on February 3, 2026, with the place of performance identified as Brookfield. While details such as solicitation number, set-aside type, and contact information are not provided, the contract focuses on delivering high-quality, corrosion-resistant components essential for maintaining the structural integrity and safety of submarine railings. This ensures compliance with military standards and supports ongoing naval shipbuilding efforts.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Precision Fabrication of Submarine Safety Rail StanchionsThis contract involves the precision fabrication of replacement stanchions for the submarine flying bridge safety rails. The work requires producing components that strictly adhere to original equipment manufacturer (OEM) specifications in terms of form, fit, and function. The materials used must be marine-grade to ensure durability and compatibility within the submarine environment. The contract is classified as a subcontract under NAICS code 332311, which pertains to fabricated structural metal manufacturing. It is issued by the Department of Defense through the Supply Of Shipbuilding Groton office, with the place of performance located in Brookfield. The solicitation was posted on February 3, 2026, and focuses on delivering exact replacement parts critical for maintaining the safety features of submarine flying bridges.

Prefabricated Metal Building and Component Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS