Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supplier of Aerospace Components (NAICS 336411)

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks suppliers to provide aerospace components under NAICS code 336411, specifically for integration into combat vehicles and armament systems, with strict adherence to Defense Logistics Agency technical and quality standards. The solicitation, issued by the LSO Combat Vehicles and Armament office under the Department of Defense, is classified as a subcontract and requires responses to be submitted by August 3, 2026, with the performance location designated as New Cumberland, Pennsylvania, 17070-5002. Suppliers must be prepared to meet the rigorous specifications associated with defense-grade aerospace parts, ensuring compatibility, durability, and reliability in high-stakes operational environments. All work must align with the technical requirements set forth by the contracting authority, and successful bidders will be expected to deliver components that support critical military systems without deviation from established protocols.

General Info

Supply aerospace components for combat vehicles per DLA standards; due August 3, 2026; New Cumberland, PA.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

336411 - Aircraft ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply aerospace products or parts under NAICS 336411, likely for integration into combat vehicles or armament systems, meeting DLA technical and quality standards.

Similar Contracts

Same NAICS industry code

BRACKET, MOUNTING, TURBIThe contract pertains to the procurement of a mounting bracket for a turbine, identified by part number 205477 and NSN 1660005947212, with a quantity of eleven units. The item is classified as a critical application item and must be manufactured using a metal casting process, requiring specialized tooling for production. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on procurement size. The supplier must comply with stringent documentation standards including Source Approval Request procedures, Cybersecurity Maturity Model Certification Level 2 self-assessment, and the removal of government identification from non-accepted supplies. Physical marking of the bare item is required per RQ017, though Item Unique Identification is waived per customer request. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization as specified in DLA’s packaging guidelines. All units are to be delivered FOB origin to Tinker AFB, Oklahoma, with delivery due within 166 days of the contract award. The required delivery date is May 21, 2027, with an original need date of January 17, 2027. Transportation and shipping details are governed by DLAD procedural notes, and the unit of issue is per EA as specified. The contract is under solicitation SPE4A5-26-T-308X, issued by the Department of Defense, with Caroline Simpson as the primary point of contact.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 14 hours ago

DEADLINE

COVER, ACCESSThis contract, issued under solicitation SPE7L1-26-T-877N by the Defense Logistics Agency for a single unit of COVER ACCESS with NSN 5340-00-771-8370, mandates strict compliance with technical, quality, and export control requirements. The contract incorporates referenced technical and quality standards from the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition size. It prohibits the use of Class I ozone-depleting chemicals in any delivered items, overriding any conflicting specification but not waiving product performance obligations, and requires approval for any substitute chemicals. The contractor must conduct Government fit verification testing on the first article unit, submitting exhibits, test reports per DI-NDTI-80809B, material certifications, process operations sheets, and manufacturing drawings. Production quantities may not be manufactured prior to formal acceptance of test samples, and the vendor assumes all risk for early production. The contract also enforces stringent export controls under ITAR or EAR, restricting disclosure of technical data to foreign persons regardless of location, and applies to both U.S. companies and their foreign subsidiaries. Access to export-controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD training, and explicit authorization from DLA. The requirement to comply with DFARS 252.225-7048 is explicitly noted. The item is to be delivered to Robins Air Force Base, Georgia, within 495 days of contract award, with responses due by August 6, 2026. The contract is classified under NAICS 336411 and managed by the Department of Defense’s Land Supply Chain, with Isabelle Szulewska as the primary point of contact.

LAND SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

SLEEVE, STRAINERThe contract is for the procurement of two units of a SLEEVE, STRAINER with NSN 1615-01-240-5451 and part number 65394-07021-102, supplied by SIKORSKY AIRCRAFT CORPORATION, CAGE 78286. The item is classified as a critical application component with no shelf life requirement and is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which override other specifications like ASTM D3951. Technical data associated with this item is restricted and not releasable to foreign nationals, requiring vendors to complete a specific form from the Foreign Secure folder prior to access. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 is mandatory, and all packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines. Sampling follows an approved alternate statistical acceptance plan per QAP 1201, meeting or exceeding ASQ H1331 or MIL-STD-1916 standards. Delivery is required within 20 days of contract award, with shipment destined to the Marine Aviation Logistics Squadron 26 at MCAS New River, Jacksonville, NC. Delivery terms are FOB origin, with inspection and acceptance occurring at the destination; no quantity variance is permitted. The item must be shipped via traceable transport methods as designated by RDD 777, explicitly excluding parcel post. Item Unique Identification is not required per customer request under DFARS 252.211-7003(c)(1)(i), but physical marking per RQ017 remains mandatory. The contract also mandates documentation compliance for Source Approval Requests, removal of government identification from non-accepted supplies, and proper use of measuring and test equipment. All activities must meet the DLA-mandated unit of issue standard, and the response deadline for this solicitation is August 3, 2026, with the original required delivery date set for July 20, 2026.

ASC COMMODITIES DIVISION

POSTED

about 14 hours ago

DEADLINE

GASKETThis contract is for the procurement of a gasket identified by NSN 5330014978072 under solicitation SPE7LX-26-U-8766, issued by the Department of Defense’s Strategic Acquisitions Program Directorate as an indefinite-delivery contract with a maximum value of $350,000. The estimated quantity is 10,301 units, though this is non-binding and subject to future delivery orders, with a guaranteed minimum of 1,545 units upon first order placement. Delivery must occur within 97 days of order issuance, FOB origin, and all shipments are restricted to the continental United States. Packaging requirements are strictly defined: the gasket must be sealed in a medium-duty, waterproof, greaseproof, opaque bag conforming to MIL-DTL-117, Type II, Class C, Style 1, and further packaged and palletized in accordance with MIL-STD-2073-1E and DLA’s RP001 packaging standards. Special exclusion from the First Destination Packaging Program applies due to UV sensitivity of the item’s classification in Federal Supply Class 5330/5331, which mandates opaque packaging to prevent degradation. Marking must follow MIL-STD-129, including machine-readable 2D Data Matrix bar codes, with no special marking required. No asbestos is permitted under FED-STD-313, and preservation is limited to cleaning and drying with no chemical inhibitors. The contract mandates compliance with hazardous materials regulations including OSHA’s Hazard Communication Standard and requires submission of Safety Data Sheets prior to award. Cybersecurity requirements under NIST SP 800-171 apply to safeguarding covered defense information, with mandatory reporting of cyber incidents within 72 hours. The contractor is prohibited from using hexavalent chromium and must comply with U.S. export controls under ITAR and EAR. Payment and invoicing must be processed electronically through Wide Area WorkFlow, and all representations regarding small business status, UEI, and CAGE codes must be completed per FAR and DFARS requirements. The contract is subject to clauses on employment eligibility, trafficking in persons, equal opportunity, and whistleblower protections, with pricing determined through a likely Lowest Price Technically Acceptable process, although the exact basis of award is not explicitly confirmed.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

DISK, VALVEThe contract is for the procurement of 14 units of a DISK, VALVE with NSN 1660-01-212-3079 and part number 3171032-1 from Honeywell International Inc., classified as a critical application item. Delivery is required within 182 days after receipt of order, with a need ship date of January 23, 2027, and an original required delivery date of October 14, 2026. The item is to be delivered FOB Origin to the DLA Distribution Depot in Oklahoma City, with no variance allowed in quantity. Inspection and acceptance occur at the manufacturer’s origin site, governed by FAR 52.246-2. The product is not subject to shelf life requirements, and item unique identification is not required per DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are dictated by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede all other standards including ASTM D3951. Packaging and labeling must conform strictly to MIL-STD-129 and palletization must follow RP001 DLA Packaging Requirements, with the unit of issue set at EA and quantity per unit pack as specified in the contract. Sampling must adhere to MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan; manufacturers may optionally use attribute or variable inspection methods under MIL-STD-1916. Acceptance criteria require zero non-conformances in sampled lots even if MIL-STD-105/ASQ Z1.4 is used for lot sizing. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are considered major. The contractor’s quality system must comply with SAE AS9003 or ISO 9001 tailored to AS9003. Cybersecurity requirements include CMMC Level 2 self-assessment and compliance with NIST SP 800-171 DOD assessment requirements, alongside safeguarding covered defense information as per FAR 252.204-7012. The contract mandates electronic submission of payment requests

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

145th AW - Powered Paragliding (PPG) Flight and Sustainment SystemThis solicitation, issued under number W50S87-26-Q-5004 by the 145th Airlift Wing of the North Carolina National Guard, seeks a firm-fixed-price contract for the procurement of two Rucksack/Backpack Powered Flight Systems, along with sustainment packages, training, and associated services for tactical military operations. The requirement is set aside for small businesses under NAICS code 336411 with a size standard of 1,350 employees, and compliance with FAR Part 12 for commercial items is mandatory. The core deliverables include two powered paragliding systems each featuring a pair of distinct paraglider wings—one sized between 23 to 25 square meters for standard operator weight and another between 26 to 28 square meters certified to carry an 80-pound integrated rucksack payload—both manufactured in solid, muted tactical colors such as grey, olive drab, or coyote brown with no large commercial logos visible during flight. Visual requirements are limited to externally visible components like the canopy, harness, and motor frame, excluding internal emergency equipment such as reserve parachutes. The system must operate effectively at altitudes up to 10,000 feet, feature a 140cm propeller, adjustable harness, and night-flight capability with NVG compatibility, and include an integrated engine shutoff and right-hand throttle control. The solicitation has been amended to extend the quote submission deadline from July 24 to July 31, 2026, to accommodate the forthcoming addition of technical specifications for a parachute component not originally included. All other terms and conditions remain unchanged. Offers must be submitted via the Request for Quote process, with respondents required to be registered and active in SAM.gov. Evaluation will follow a best-value trade-off approach, prioritizing past performance as a pass/fail gatekeeper, followed by an assessment of technical acceptability and price competitiveness. Delivery is FOB destination to New London, North Carolina, with inspection and acceptance performed by the government upon receipt. The contract includes mandatory clauses related to cybersecurity, supply chain security, labor standards, whistleblower protections, and procurement restrictions concerning foreign entities, including prohibitions on products from China’s Xinjiang region, Kaspersky Lab, ByteDance applications, and inverted domestic corporations. A wage determination for North Carolina (2015-5897, Rev. 4) applies to all labor, and

W7NS Uspfo Activity Ncang 145

POSTED

DEADLINE

Sources Sought - Next Generation ACPThe U.S. Air Force is conducting market research to identify industry partners capable of designing, developing, prototyping, manufacturing, and fielding the Next Generation Semi-Autonomous Collaborative Platform, as detailed in the Sources Sought notice. This initiative, identified by solicitation number FA8693-01 and posted on July 24, 2026, is strictly for informational purposes and does not constitute a solicitation, request for proposals, or any obligation on the part of the government to award a contract or compensate respondents. Responses are due by August 10, 2026, and are intended to help the government assess industry capabilities and readiness in support of this advanced platform initiative. The work is centered at Wright Patterson Air Force Base in Ohio under the Department of Defense’s Air Force Life Cycle Management Center, with primary point of contact Cody Chesher and secondary contact Grace Smith-Heit available for inquiries. NAICS code 336411 indicates this effort pertains to aircraft manufacturing.

FA8693 Aflcmc Wayk Cca

POSTED

DEADLINE

Precision Aerospace Bracket ManufacturingThe contract requires the manufacture of two left-hand nacelle pylon brackets designated by part number 901-069-114-405 and NSN 1560-LN-003-4752, all in strict accordance with Drawing 901-069-114. The work encompasses full lifecycle production including material procurement, precision machining, rigorous inspection, and comprehensive documentation to meet applicable military specifications and quality standards. All manufacturing activities must ensure compliance with defense-grade requirements and deliverables must be fully traceable with appropriate certifications. This subcontract is issued by the Department of Defense through the DLA Fleet Readiness Center DLA PSC with performance required at Cherry Point, North Carolina, zip code 28533-0021. The solicitation falls under NAICS code 336411 for aircraft manufacturing and was posted on July 23, 2026, with responses due by July 31, 2026. The project is not subject to any specific set-aside classification and is open to qualified subcontractors capable of meeting exacting aerospace and defense manufacturing benchmarks. All deliverables must be fully compliant with DoD protocols and submitted through the designated DIBBS portal.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

FILTER BODY, FLUIDThe contract specifies the procurement of a FILTER BODY, FLUID with NSN 1660-01-341-9114 and part number 052460-03, manufactured by PUROLATOR FACET INC., under solicitation SPE4A7-26-T-593B. A total of eight units are required to be delivered FOB origin within 169 days, with a strict quantity variance of plus or minus zero percent. Inspection and acceptance occur at origin, and the item is classified as a critical application requiring adherence to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Item Unique Identification is not mandated per customer request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s RP001 requirements, and all technical and quality mandates override packaging standards. Physical identification and bare item marking are mandatory under RQ017. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, with a required ship date of January 17, 2027, and an original delivery target of January 1, 2027. Transportation and freight details reference DLAD Proc Notes C19 and C20. The unit of issue is each, with a unit price of $8.00 and a total contract value of $64.00. The item is governed by tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and covered defense information provisions may apply. The offer response deadline was July 31, 2026, and the solicitation was posted on July 23, 2026. Primary point of contact is Huy Nguyen at DLA, reachable via phone and email provided. The NAICS code is 336411, and the contracting agency is the Department

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

GASKETThe contract pertains to a gasket item identified by part number 70520-A and NSN 5330-01-026-0656, with a procurement quantity of 84 units under solicitation SPE7M4-26-T-284F. The item is classified as a TYPE I (CODE Q) with a non-extendable shelf life of 36 months, subject to specific DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements. The product must comply with strict material restrictions, including a complete prohibition of asbestos as defined in FED-STD-313 and the intentional exclusion of mercury or mercury-containing compounds, except in approved exceptions such as batteries, fluorescent lights, instrumentation, sensors, weapon systems, or naval-specified chemical reagents; any permitted mercury-containing devices must be shock-proof with a secondary containment boundary per NAVSEA 5100-003D. The gasket has been manually exempted from the First Destination Packaging Program and is not eligible for standard commercial packaging. Delivery is required within 168 days after award, with performance to occur at New Cumberland, Pennsylvania, 17070-5002, and the solicitation closes on August 3, 2026. The contracting activity falls under the Department of Defense’s Fluid Handling Division with Blake Tushar as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

GASKETThe gasket, identified by NSN 5330-00-327-0450 with a quantity of 173 units, is subject to strict export control regulations under either ITAR or EAR, meaning any disclosure of its associated technical data to foreign persons—whether inside or outside the United States—is prohibited without explicit authorization from the Department of State or the Department of Commerce. This restriction extends to foreign national employees and U.S. companies with foreign subsidiaries, and compliance with DFARS 252.225-7048 is mandatory. Distribution is limited exclusively to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by the DLA controlling authority. The procurement is part of a total small business set-aside solicitation under NAICS code 336411, issued by the Department of Defense’s Fluid Handling Division, with performance required at Tinker AFB, Oklahoma. The solicitation has a response deadline of August 3, 2026, and a delivery timeline of 363 days after award, with Blake Tushar designated as the primary point of contact.

FLUID HANDLING DIVISION

POSTED

DEADLINE

GASKETThe contract pertains to the procurement of 189 gaskets identified by NSN 5330-01-122-6128 under solicitation SPE7L3-26-T-129T, with a required delivery within 84 days of award. The item is subject to stringent technical and quality requirements, including compliance with MIL-STD-130N for identification marking of U.S. military property and adherence to DLA packaging standards that mandate medium duty, waterproof, greaseproof, and opaque packaging conforming to MIL-DTL-117, Type II, Class C, Style 1, specifically for direct vendor delivery, foreign military sales, and stock shipments. The gasket must be free of asbestos, and any substitute materials require formal approval under Clause L30 and Provision 4 conditions. A non-extendable shelf life of 96 months applies, classifying the item as TYPE I (CODE U), and the contract incorporates cybersecurity maturity requirements through CMMC Level 2 certification for third-party assessors. The contract also includes Federal Supply Classifications 5330/5331 and mandates compliance with DLA’s Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The item is to be delivered to Anniston, Alabama, with Susan Diamond listed as the primary point of contact, and the solicitation was posted on July 23, 2026, with responses due by August 3, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

SHAFT, SHOULDEREDThe item specified is a shaft, shouldered, with the NSN 3040-01-356-6837, for a quantity of 259 units, under purchase request 1000237294. Delivery is required within 127 days after award. The solicitation number is SPE7L4-26-U-1002, with a posted date of July 26, 2026, and a response deadline of August 10, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition type and timing. The contract includes cybersecurity requirements mandating CMMC Level 2 certification for third-party assessors and applies to covered defense information. DLA packaging standards must be followed, and government identification must be removed from non-accepted supplies. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 governs its handling. Access to this controlled data is restricted to DLA contractors with approved U.S./Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and formal approval from the DLA controlling authority. The contracting activity is under the Department of Defense, specifically LSO Combat Vehicles and Armament, with Heather Kessler listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

GEAR, SPURThe contract pertains to the procurement of 10 spur gears, part number 3020-00-817-9538, under solicitation SPE7L4-26-T-5833, with a delivery requirement of 20 days after order placement. The technical specifications and quality standards for this item are governed by the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation issue date. The item is classified as Covered Defense Information, and the supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and subsidiaries. Access to this controlled data is restricted exclusively to contractors who hold a valid US/Canada Joint Certification Program credential, have completed mandatory DOD export control training, and have been formally approved by DLA. The solicitation is issued by the Department of Defense through the LSO Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact, and is open for response until August 6, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

GOVERNOR, DIESEL ENGINEThe contract specifies the procurement of two diesel engine governors with part number 8448939 and NSN 2910-01-280-9338, supplied by ENGINE SYSTEMS, INC. and PROGRESS RAIL LOCOMOTIVE INC., under solicitation SPE7L4-26-T-5829. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering strictly to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Packaging must also meet DLA’s packaging requirements and be palletized according to specified standards. The goods must be shipped via the fastest traceable means, excluding parcel post, to Fort Eustis, Virginia, with delivery coordinated by the designated military logistics code W26RK4. The contract is set aside for Women-Owned Small Businesses and falls under NAICS code 333618, issued by the Department of Defense’s Combat Vehicles and Armament office. The required delivery date is July 23, 2026, with a response deadline of August 6, 2026, and a unit price of $2.00 per unit for a total value of $4.00. The purchasing request number is 7017607541, and all documentation must reference the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The point of contact is Anna-Rachelle Betts, with primary inquiries directed to dla.flda1prs@dla.mil. Government use codes and shipping identifiers are specified for internal tracking, and all packaging must include accurate unit of issue and quantity per unit pack data as defined in the purchase order.

Other Engine Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGEThis contract is for the procurement of 131 units of a Type I battery storage item with part number 48-11-1813 and NSN 6140017214957 from MILWAUKEE ELECTRIC TOOL CORP, classified as a critical application item requiring government engineering source approval. The item has a non-extendable shelf life of 36 months and must comply with stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf life tracking. Packaging and shipment must adhere to DLA packaging requirements and hazardous material protocols, with the item delivered FOB destination within 11 days of contract award. Mercury or mercury-containing compounds are prohibited unless functionally embedded in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments requiring double containment per NAVSEA guidelines. Inspection and acceptance occur at destination using zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, with all attributes assumed major unless otherwise defined. Transportation logistics follow DLA procedural notes, with delivery directed to the DDSP New Cumberland facility in Pennsylvania. The contract is restricted source, with technical and quality requirements governed by the DLA Master List, and unit of issue is each (EA) at a fixed unit price of $131.00, totaling $17,161.00.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

CONNECTING LINK, RIGThis contract is for the procurement of 19 rigid connecting links identified by NSN 3040-01-576-6703 and part number A05-27895-000 under solicitation SPE7L4-26-U-1005, issued by the Department of Defense through the DLA for delivery to a federal customer. The item is classified under NAICS code 333613 and is subject to a Total Small Business Set-Aside, meaning only small businesses may respond. Delivery is required within 127 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-129 for marking and labeling and ASTM D3951 for general packaging, with all DLA Master List of Technical and Quality Requirements overriding any conflicting standards. The unit of issue is each, and the price is $19.00 per unit, totaling $361.00. All packaging and palletization must adhere to DLA’s RP001 requirements, and government identification must be removed from non-accepted supplies as specified in RQ011. The solicitation is managed by the LSO Combat Vehicles and Armament office, with Heather Kessler listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTUThe contract specifies the procurement of a linear actuating cylinder assembly with a 7.750 inch diameter, an extended length of 18.880 inches, a retracted length of 9.120 inches, and a working pressure of 2500.0 psi, featuring a two-stage design. It is identified for use on NSN 1740-01-266-7299, a crash salvage crane supporting the F/A-18 Hornet aircraft, and is classified as a critical application item. The technical and quality requirements are governed by MIL-PRF-85285, which supersedes MIL-C-83286, and all specifications are drawn from the DLA Master List of Technical and Quality Requirements referenced on the DLA website. Configuration changes require formal engineering change proposals or variance requests, and non-accepted supplies must have government identification removed per specified protocols. The item is supplied under two part numbers: Testek LLC P/N 00241-0150 and Parker-Hannifin Corp P/N 50053801. Three units are to be delivered under CLIN 0001 with a unit price of $1,000,237,292, totaling a contract value of $3,000,711,876. The quantity is fixed with no variance allowed. Delivery is required within 123 days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization adheres to DLA Packaging Requirements for Procurement (RP001), with the DLA Master List prevailing over any conflicting standards. The solicitation number is SPE7L4-26-U-1001, issued by the Department of Defense's LSO Combat Vehicles and Armament office, with a response deadline of August 10, 2026. All supplies are procured via DLA Direct, CONUS, and must adhere to the official DoD unit of issue as defined in the provided ANSI X12 reference document.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

DUAL AXIS FOG GYROThe Dual Axis FOG Gyro is a critical application item under contract SPE7L4-26-T-5836, procured by the Department of Defense through the Defense Logistics Agency for use in combat vehicle and armament systems. The item, identified by NSN 1005-01-566-1917 and part number 1533.0001.501 or 1940018286, is sourced from approved suppliers including BAE Systems Land & Armaments LP, Ofer Motor Co. Ltd, Tamam Division-Israel, and Rafael Advanced Defense Systems Ltd. It requires full compliance with MIL-STD-130 for Item Unique Identification and MIL-STD-129 for marking, with packaging governed by MIL-STD-2073-1E, including specific preservation, wrapping, and containment methods. The contract mandates strict adherence to DLA packaging requirements, palletization standards, and the removal of government identification from non-accepted supplies. Delivery is set for 165 days after award, FOB origin, with final delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The requirement is for ten units at a unit price of $10, with zero variance allowed in quantity, and inspection and acceptance will occur at the destination. The item is subject to technical and quality requirements referenced from the DLA Master List, and all provisions for simplified acquisition control are governed by the revision in effect on the award date. The contract also includes transportation directives and a required ship date of January 19, 2027, with an original delivery deadline of May 13, 2028.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

TUBE ASSEMBLY, METALThis contract is for one unit of a metal tube assembly with NSN 4710-01-319-0872 and part number 255738, supplied by Stewart & Stevenson Power Products LLC under solicitation SPE7L4-26-T-5830. Delivery is required within five days of contract award, with FOB origin terms and no tolerance for quantity variance. The item is designated as a critical application item, and all supplies must strictly comply with DLA packaging requirements and MIL-STD-2073-1E, including specific packaging methods, container types, and marking per MIL-STD-129. Mercury and mercury-containing compounds are prohibited except for approved functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable devices. The delivery destination is the USS PRINCETON CG 59 at FPO AP 96675, and shipments must use the fastest traceable means, explicitly prohibiting parcel post. Transportation and shipment procedures follow DLA procedural notes C19 and C20, with special handling directed via VSM and the provided TCN. The required delivery date is July 23, 2026, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, effective as of the solicitation issue date.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

TAG, INSTRUCTIONThis contract, issued under solicitation SPE7L4-26-T-5835 by the Department of Defense through the Defense Logistics Agency, mandates the procurement of 50 units of item NSN 9905-21-914-1850 at a unit price of $50.00, totaling $2,500.00, with delivery required within five days of award at FOB origin. All supplies must be packaged per ASTM D3951 and labeled in strict accordance with MIL-STD-129, with packaging and palletization conforming to the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The unit of issue is each (EA), with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery must be shipped by the fastest traceable method, excluding parcel post, and sent to the specified address in Anniston, Alabama, marked for W56YK0 under the government-assigning code W6DX CPE GCP ANNISTON and identified with the tracking number W9095362037549. The original required delivery date is July 28, 2026, with the contract set to expire on August 6, 2026. All items must have government identification removed if not accepted, and the supply is subject to DLA packaging and labeling protocols as referenced in RP001 and RQ011.

Sign Manufacturing

POSTED

about 14 hours ago

DEADLINE

GEAR, SPURThe contract encompasses the procurement of a spur gear with NSN 3020014397923, specified under solicitation SPE7L4-26-T-5831, requiring delivery of one unit within 20 days to the USS THE SULLIVANS DDG 68, addressed through FPO AA 34093. All units must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, unit container type D4, and marking per MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and shipments must use the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB destination with zero quantity variance allowed, and inspection and acceptance occur upon arrival. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or specified reagents, with additional containment requirements for portable devices. The contract references the DLA Master List of Technical and Quality Requirements for technical specifications, and only the version in effect on the solicitation or award date applies depending on acquisition size. The item is designated as a critical application item, and vendors must use the DLA Vendor Shipment Management system. The required delivery date is July 22, 2026, and the contracting office is the Department of Defense’s LSO Combat Vehicles and Armament under the Naval Sea Systems Command, with Anna-Rachelle Betts listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, MOUNTINGThis contract pertains to the procurement of a single mounting plate with NSN 5340-01-297-4688 and part number 10518821, designated as a critical application item for General Dynamics Land Systems Canada. The item must comply with all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including those related to packaging, sampling, and hazardous material handling. The contract explicitly prohibits the use or incorporation of Class I ozone depleting chemicals, and any substitute chemicals require prior approval unless already authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Packaging must adhere to DLA-specific requirements under RP001, with labeling per MIL-STD-129 and commercial packaging under ASTM D3951 only if the item is non-hazardous; however, DLA requirements take precedence. Hazardous items must conform to TQ requirement IP025. The unit of issue is each (EA), with no variance allowed in quantity, and delivery is due within 20 days FOB origin to Fort Irwin, California, using traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at the destination. The required delivery date is July 22, 2026, and all documentation, marking, and palletization must reflect the specified DLA packaging and labeling standards.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, MOUNTINGThe contract pertains to the procurement of 25 mounting plates identified by NSN 5340-01-442-5612 under purchase request 7017618406, with a required delivery within five days of award. The solicitation number is SPE7L4-26-T-5825, issued on July 26, 2026, with responses due by August 6, 2026, and is classified under NAICS code 332510 for metal forging and stamping. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must comply with DLA packaging requirements as outlined in RP001 and incorporates all referenced technical and quality standards identified by R or I numbers. Government identification must be removed from any non-accepted supplies as per RQ011. The contracting activity is under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with primary point of contact Anna-Rachelle Betts reachable via email and phone provided. The place of performance and delivery location are unspecified, and the solicitation is open to federal contractors without a specified set-aside classification.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE